hwmon: (lm85) Drop dead code

Drop a lot of useless register defines, conversion macros, data structure
members and update code. All these register values were read from the
device but nothing is done out of them, so this is all dead code in
practice.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

1 files changed, 2 insertions, 80 deletions

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 0c0fede8dde9..0d31435b333c 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -56,16 +56,9 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 
 #define LM85_REG_PWM(nr)                (0x30 + (nr))
 
-#define ADT7463_REG_OPPOINT(nr)         (0x33 + (nr))
-
-#define ADT7463_REG_TMIN_CTL1           0x36
-#define ADT7463_REG_TMIN_CTL2           0x37
-
-#define LM85_REG_DEVICE                 0x3d
 #define LM85_REG_COMPANY                0x3e
 #define LM85_REG_VERSTEP                0x3f
 /* These are the recognized values for the above regs */
-#define LM85_DEVICE_ADX                 0x27
 #define LM85_COMPANY_NATIONAL           0x01
 #define LM85_COMPANY_ANALOG_DEV         0x41
 #define LM85_COMPANY_SMSC               0x5c
@@ -91,27 +84,14 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define LM85_REG_AFAN_CONFIG(nr)        (0x5c + (nr))
 #define LM85_REG_AFAN_RANGE(nr)         (0x5f + (nr))
 #define LM85_REG_AFAN_SPIKE1            0x62
-#define LM85_REG_AFAN_SPIKE2            0x63
 #define LM85_REG_AFAN_MINPWM(nr)        (0x64 + (nr))
 #define LM85_REG_AFAN_LIMIT(nr)         (0x67 + (nr))
 #define LM85_REG_AFAN_CRITICAL(nr)      (0x6a + (nr))
 #define LM85_REG_AFAN_HYST1             0x6d
 #define LM85_REG_AFAN_HYST2             0x6e
 
-#define LM85_REG_TACH_MODE              0x74
-#define LM85_REG_SPINUP_CTL             0x75
-
-#define ADM1027_REG_TEMP_OFFSET(nr)     (0x70 + (nr))
-#define ADM1027_REG_CONFIG2             0x73
-#define ADM1027_REG_INTMASK1            0x74
-#define ADM1027_REG_INTMASK2            0x75
 #define ADM1027_REG_EXTEND_ADC1         0x76
 #define ADM1027_REG_EXTEND_ADC2         0x77
-#define ADM1027_REG_CONFIG3             0x78
-#define ADM1027_REG_FAN_PPR             0x7b
-
-#define ADT7463_REG_THERM               0x79
-#define ADT7463_REG_THERM_LIMIT         0x7A
 
 #define EMC6D100_REG_ALARM3             0x7d
 /* IN5, IN6 and IN7 */
@@ -263,13 +243,6 @@ static int ZONE_TO_REG(int zone)
 #define HYST_TO_REG(val)        SENSORS_LIMIT(((val) + 500) / 1000, 0, 15)
 #define HYST_FROM_REG(val)      ((val) * 1000)
 
-#define OFFSET_TO_REG(val)      SENSORS_LIMIT((val) / 25, -127, 127)
-#define OFFSET_FROM_REG(val)    ((val) * 25)
-
-#define PPR_MASK(fan)           (0x03 << ((fan) * 2))
-#define PPR_TO_REG(val, fan)    (SENSORS_LIMIT((val) - 1, 0, 3) << ((fan) * 2))
-#define PPR_FROM_REG(val, fan)  ((((val) >> ((fan) * 2)) & 0x03) + 1)
-
 /* Chip sampling rates
  *
  * Some sensors are not updated more frequently than once per second
@@ -330,23 +303,15 @@ struct lm85_data {
         s8 temp[3];             /* Register value */
         s8 temp_min[3];         /* Register value */
         s8 temp_max[3];         /* Register value */
-        s8 temp_offset[3];      /* Register value */
         u16 fan[4];             /* Register value */
         u16 fan_min[4];         /* Register value */
         u8 pwm[3];              /* Register value */
-        u8 spinup_ctl;          /* Register encoding, combined */
-        u8 tach_mode;           /* Register encoding, combined */
         u8 temp_ext[3];         /* Decoded values */
         u8 in_ext[8];           /* Decoded values */
-        u8 fan_ppr;             /* Register value */
-        u8 smooth[3];           /* Register encoding */
+        u8 smooth[1];           /* Register encoding */
         u8 vid;                 /* Register value */
         u8 vrm;                 /* VRM version */
         u8 syncpwm3;            /* Saved PWM3 for TACH 2,3,4 config */
-        u8 oppoint[3];          /* Register value */
-        u16 tmin_ctl;           /* Register value */
-        unsigned long therm_total; /* Cummulative therm count */
-        u8 therm_limit;         /* Register value */
         u32 alarms;             /* Register encoding, combined */
         struct lm85_autofan autofan[3];
         struct lm85_zone zone[3];
@@ -1335,10 +1300,6 @@ static int lm85_read_value(struct i2c_client *client, u8 reg)
                 res = i2c_smbus_read_byte_data(client, reg) & 0xff;
                 res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
                 break;
-        case ADT7463_REG_TMIN_CTL1:  /* Read WORD MSB, LSB */
-                res = i2c_smbus_read_byte_data(client, reg) << 8;
-                res |= i2c_smbus_read_byte_data(client, reg + 1) & 0xff;
-                break;
         default:        /* Read BYTE data */
                 res = i2c_smbus_read_byte_data(client, reg);
                 break;
@@ -1365,11 +1326,6 @@ static int lm85_write_value(struct i2c_client *client, u8 reg, int value)
                 res |= i2c_smbus_write_byte_data(client, reg + 1,
                                                  (value >> 8) & 0xff);
                 break;
-        case ADT7463_REG_TMIN_CTL1:  /* Write WORD MSB, LSB */
-                res = i2c_smbus_write_byte_data(client, reg,
-                                                (value >> 8) & 0xff);
-                res |= i2c_smbus_write_byte_data(client, reg + 1, value & 0xff);
-                break;
         default:        /* Write BYTE data */
                 res = i2c_smbus_write_byte_data(client, reg, value);
                 break;
@@ -1483,12 +1439,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 
                 data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
 
-                if (data->type == adt7463) {
-                        if (data->therm_total < ULONG_MAX - 256) {
-                            data->therm_total +=
-                                lm85_read_value(client, ADT7463_REG_THERM);
-                        }
-                } else if (data->type == emc6d100) {
+                if (data->type == emc6d100) {
                         /* Three more voltage sensors */
                         for (i = 5; i <= 7; ++i) {
                                 data->in[i] = lm85_read_value(client,
@@ -1585,9 +1536,6 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                 data->autofan[0].min_off = (i & 0x20) != 0;
                 data->autofan[1].min_off = (i & 0x40) != 0;
                 data->autofan[2].min_off = (i & 0x80) != 0;
-                i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
-                data->smooth[1] = (i >> 4) & 0x0f;
-                data->smooth[2] = i & 0x0f;
 
                 i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
                 data->zone[0].hyst = (i >> 4) & 0x0f;
@@ -1596,32 +1544,6 @@ static struct lm85_data *lm85_update_device(struct device *dev)
                 i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
                 data->zone[2].hyst = (i >> 4) & 0x0f;
 
-                if (data->type == lm85b || data->type == lm85c) {
-                        data->tach_mode = lm85_read_value(client,
-                                LM85_REG_TACH_MODE);
-                        data->spinup_ctl = lm85_read_value(client,
-                                LM85_REG_SPINUP_CTL);
-                } else if (data->type == adt7463 || data->type == adm1027) {
-                        if (data->type == adt7463) {
-                                for (i = 0; i <= 2; ++i) {
-                                    data->oppoint[i] = lm85_read_value(client,
-                                        ADT7463_REG_OPPOINT(i));
-                                }
-                                data->tmin_ctl = lm85_read_value(client,
-                                        ADT7463_REG_TMIN_CTL1);
-                                data->therm_limit = lm85_read_value(client,
-                                        ADT7463_REG_THERM_LIMIT);
-                        }
-                        for (i = 0; i <= 2; ++i) {
-                                data->temp_offset[i] = lm85_read_value(client,
-                                                ADM1027_REG_TEMP_OFFSET(i));
-                        }
-                        data->tach_mode = lm85_read_value(client,
-                                ADM1027_REG_CONFIG3);
-                        data->fan_ppr = lm85_read_value(client,
-                                ADM1027_REG_FAN_PPR);
-                }
-
                 data->last_config = jiffies;
         }  /* last_config */