hwmon: (lm70) Add TI TMP121 support

The Texas Instruments TMP121 is a SPI temperature sensor very similar
to the LM70, with slightly higher resolution.  This patch extends the
LM70 driver to support the TMP121.  The TMP123 differs in pin assign-
ment.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 74 insertions, 10 deletions

diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index 9f9741b1d2b5..ae6204f33214 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -37,9 +37,13 @@
 
 #define DRVNAME         "lm70"
 
+#define LM70_CHIP_LM70          0       /* original NS LM70 */
+#define LM70_CHIP_TMP121        1       /* TI TMP121/TMP123 */
+
 struct lm70 {
         struct device *hwmon_dev;
         struct mutex lock;
+        unsigned int chip;
 };
 
 /* sysfs hook function */
@@ -47,7 +51,7 @@ static ssize_t lm70_sense_temp(struct device *dev,
                 struct device_attribute *attr, char *buf)
 {
         struct spi_device *spi = to_spi_device(dev);
-        int status, val;
+        int status, val = 0;
         u8 rxbuf[2];
         s16 raw=0;
         struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
@@ -70,6 +74,7 @@ static ssize_t lm70_sense_temp(struct device *dev,
                 rxbuf[0], rxbuf[1], raw);
 
         /*
+         * LM70:
          * The "raw" temperature read into rxbuf[] is a 16-bit signed 2's
          * complement value. Only the MSB 11 bits (1 sign + 10 temperature
          * bits) are meaningful; the LSB 5 bits are to be discarded.
@@ -79,8 +84,21 @@ static ssize_t lm70_sense_temp(struct device *dev,
          * by 0.25. Also multiply by 1000 to represent in millidegrees
          * Celsius.
          * So it's equivalent to multiplying by 0.25 * 1000 = 250.
+         *
+         * TMP121/TMP123:
+         * 13 bits of 2's complement data, discard LSB 3 bits,
+         * resolution 0.0625 degrees celsius.
          */
-        val = ((int)raw/32) * 250;
+        switch (p_lm70->chip) {
+        case LM70_CHIP_LM70:
+                val = ((int)raw / 32) * 250;
+                break;
+
+        case LM70_CHIP_TMP121:
+                val = ((int)raw / 8) * 625 / 10;
+                break;
+        }
+
         status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
 out:
         mutex_unlock(&p_lm70->lock);
@@ -92,22 +110,31 @@ static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL);
 static ssize_t lm70_show_name(struct device *dev, struct device_attribute
                               *devattr, char *buf)
 {
-        return sprintf(buf, "lm70\n");
+        struct lm70 *p_lm70 = dev_get_drvdata(dev);
+        int ret;
+
+        switch (p_lm70->chip) {
+        case LM70_CHIP_LM70:
+                ret = sprintf(buf, "lm70\n");
+                break;
+        case LM70_CHIP_TMP121:
+                ret = sprintf(buf, "tmp121\n");
+                break;
+        default:
+                ret = -EINVAL;
+        }
+        return ret;
 }
 
 static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL);
 
 /*----------------------------------------------------------------------*/
 
-static int __devinit lm70_probe(struct spi_device *spi)
+static int __devinit common_probe(struct spi_device *spi, int chip)
 {
         struct lm70 *p_lm70;
         int status;
 
-        /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */
-        if ((spi->mode & (SPI_CPOL|SPI_CPHA)) || !(spi->mode & SPI_3WIRE))
-                return -EINVAL;
-
         /* NOTE:  we assume 8-bit words, and convert to 16 bits manually */
 
         p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL);
@@ -115,6 +142,7 @@ static int __devinit lm70_probe(struct spi_device *spi)
                 return -ENOMEM;
 
         mutex_init(&p_lm70->lock);
+        p_lm70->chip = chip;
 
         /* sysfs hook */
         p_lm70->hwmon_dev = hwmon_device_register(&spi->dev);
@@ -142,6 +170,24 @@ out_dev_reg_failed:
         return status;
 }
 
+static int __devinit lm70_probe(struct spi_device *spi)
+{
+        /* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */
+        if ((spi->mode & (SPI_CPOL | SPI_CPHA)) || !(spi->mode & SPI_3WIRE))
+                return -EINVAL;
+
+        return common_probe(spi, LM70_CHIP_LM70);
+}
+
+static int __devinit tmp121_probe(struct spi_device *spi)
+{
+        /* signaling is SPI_MODE_0 with only MISO connected */
+        if (spi->mode & (SPI_CPOL | SPI_CPHA))
+                return -EINVAL;
+
+        return common_probe(spi, LM70_CHIP_TMP121);
+}
+
 static int __devexit lm70_remove(struct spi_device *spi)
 {
         struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
@@ -155,6 +201,15 @@ static int __devexit lm70_remove(struct spi_device *spi)
         return 0;
 }
 
+static struct spi_driver tmp121_driver = {
+        .driver = {
+                .name   = "tmp121",
+                .owner  = THIS_MODULE,
+        },
+        .probe  = tmp121_probe,
+        .remove = __devexit_p(lm70_remove),
+};
+
 static struct spi_driver lm70_driver = {
         .driver = {
                 .name   = "lm70",
@@ -166,17 +221,26 @@ static struct spi_driver lm70_driver = {
 
 static int __init init_lm70(void)
 {
-        return spi_register_driver(&lm70_driver);
+        int ret = spi_register_driver(&lm70_driver);
+        if (ret)
+                return ret;
+
+        ret = spi_register_driver(&tmp121_driver);
+        if (ret)
+                spi_unregister_driver(&lm70_driver);
+
+        return ret;
 }
 
 static void __exit cleanup_lm70(void)
 {
         spi_unregister_driver(&lm70_driver);
+        spi_unregister_driver(&tmp121_driver);
 }
 
 module_init(init_lm70);
 module_exit(cleanup_lm70);
 
 MODULE_AUTHOR("Kaiwan N Billimoria");
-MODULE_DESCRIPTION("National Semiconductor LM70 Linux driver");
+MODULE_DESCRIPTION("NS LM70 / TI TMP121/TMP123 Linux driver");
 MODULE_LICENSE("GPL");