hwmon: (adt7475) Add support for the ADT7490

Add support for the Analog Devices ADT7490 chip. This chip is largely
compatible with the ADT7473 and ADT7475, with additional features.
In particular, it has 6 voltage inputs instead of 2.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>

1 files changed, 103 insertions, 12 deletions

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 520773b16544..e495665569e5 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -3,7 +3,8 @@
  * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
  * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
  * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
-
+ * Copyright (C) 2009 Jean Delvare <khali@linux-fr.org>
+ *
  * Derived from the lm83 driver by Jean Delvare
  *
  * This program is free software; you can redistribute it and/or modify
@@ -39,6 +40,9 @@
 
 /* 7475 Common Registers */
 
+#define REG_VTT                 0x1E    /* ADT7490 only */
+#define REG_EXTEND3             0x1F    /* ADT7490 only */
+
 #define REG_VOLTAGE_BASE        0x20
 #define REG_TEMP_BASE           0x25
 #define REG_TACH_BASE           0x28
@@ -79,6 +83,11 @@
 #define REG_CONFIG5             0x7C
 #define REG_CONFIG4             0x7D
 
+#define REG_STATUS4             0x81    /* ADT7490 only */
+
+#define REG_VTT_MIN             0x84    /* ADT7490 only */
+#define REG_VTT_MAX             0x86    /* ADT7490 only */
+
 #define CONFIG4_MAXDUTY         0x08
 
 #define CONFIG5_TWOSCOMP        0x01
@@ -119,11 +128,12 @@
 
 static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
-I2C_CLIENT_INSMOD_2(adt7473, adt7475);
+I2C_CLIENT_INSMOD_3(adt7473, adt7475, adt7490);
 
 static const struct i2c_device_id adt7475_id[] = {
         { "adt7473", adt7473 },
         { "adt7475", adt7475 },
+        { "adt7490", adt7490 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, adt7475_id);
@@ -139,7 +149,7 @@ struct adt7475_data {
         u8 config4;
         u8 config5;
         u8 has_voltage;
-        u16 alarms;
+        u32 alarms;
         u16 voltage[3][6];
         u16 temp[7][3];
         u16 tach[2][4];
@@ -306,10 +316,17 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
 
         data->voltage[sattr->nr][sattr->index] = volt2reg(sattr->index, val);
 
-        if (sattr->nr == MIN)
-                reg = VOLTAGE_MIN_REG(sattr->index);
-        else
-                reg = VOLTAGE_MAX_REG(sattr->index);
+        if (sattr->index < ADT7475_VOLTAGE_COUNT) {
+                if (sattr->nr == MIN)
+                        reg = VOLTAGE_MIN_REG(sattr->index);
+                else
+                        reg = VOLTAGE_MAX_REG(sattr->index);
+        } else {
+                if (sattr->nr == MIN)
+                        reg = REG_VTT_MIN;
+                else
+                        reg = REG_VTT_MAX;
+        }
 
         i2c_smbus_write_byte_data(client, reg,
                                   data->voltage[sattr->nr][sattr->index] >> 2);
@@ -818,6 +835,12 @@ static ssize_t set_pwm_at_crit(struct device *dev,
         return count;
 }
 
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
 static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
 static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
                             set_voltage, MAX, 1);
@@ -830,6 +853,24 @@ static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
 static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
                             set_voltage, MIN, 2);
 static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MAX, 3);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MIN, 3);
+static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MAX, 4);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MIN, 4);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8);
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5);
+static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MAX, 5);
+static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage,
+                            set_voltage, MIN, 5);
+static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31);
 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
 static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
@@ -1009,7 +1050,29 @@ static struct attribute *adt7475_attrs[] = {
         NULL,
 };
 
+/* Attributes specific to the ADT7490 */
+static struct attribute *adt7490_attrs[] = {
+        &sensor_dev_attr_in0_input.dev_attr.attr,
+        &sensor_dev_attr_in0_max.dev_attr.attr,
+        &sensor_dev_attr_in0_min.dev_attr.attr,
+        &sensor_dev_attr_in0_alarm.dev_attr.attr,
+        &sensor_dev_attr_in3_input.dev_attr.attr,
+        &sensor_dev_attr_in3_max.dev_attr.attr,
+        &sensor_dev_attr_in3_min.dev_attr.attr,
+        &sensor_dev_attr_in3_alarm.dev_attr.attr,
+        &sensor_dev_attr_in4_input.dev_attr.attr,
+        &sensor_dev_attr_in4_max.dev_attr.attr,
+        &sensor_dev_attr_in4_min.dev_attr.attr,
+        &sensor_dev_attr_in4_alarm.dev_attr.attr,
+        &sensor_dev_attr_in5_input.dev_attr.attr,
+        &sensor_dev_attr_in5_max.dev_attr.attr,
+        &sensor_dev_attr_in5_min.dev_attr.attr,
+        &sensor_dev_attr_in5_alarm.dev_attr.attr,
+        NULL
+};
+
 static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group adt7490_attr_group = { .attrs = adt7490_attrs };
 
 static int adt7475_detect(struct i2c_client *client, int kind,
                           struct i2c_board_info *info)
@@ -1032,9 +1095,11 @@ static int adt7475_detect(struct i2c_client *client, int kind,
                 name = "adt7473";
         else if (devid == 0x75 && client->addr == 0x2e)
                 name = "adt7475";
+        else if ((devid2 & 0xfc) == 0x6c)
+                name = "adt7490";
         else {
                 dev_dbg(&adapter->dev,
-                        "Couldn't detect an ADT7473 or ADT7475 part at "
+                        "Couldn't detect an ADT7473/75/90 part at "
                         "0x%02x\n", (unsigned int)client->addr);
                 return -ENODEV;
         }
@@ -1059,6 +1124,9 @@ static int adt7475_probe(struct i2c_client *client,
 
         /* Initialize device-specific values */
         switch (id->driver_data) {
+        case adt7490:
+                data->has_voltage = 0x3f;       /* in0 to in5 */
+                break;
         default:
                 data->has_voltage = 0x06;       /* in1, in2 */
         }
@@ -1072,6 +1140,13 @@ static int adt7475_probe(struct i2c_client *client,
         if (ret)
                 goto efree;
 
+        if (id->driver_data == adt7490) {
+                ret = sysfs_create_group(&client->dev.kobj,
+                                         &adt7490_attr_group);
+                if (ret)
+                        goto eremove;
+        }
+
         data->hwmon_dev = hwmon_device_register(&client->dev);
         if (IS_ERR(data->hwmon_dev)) {
                 ret = PTR_ERR(data->hwmon_dev);
@@ -1082,6 +1157,8 @@ static int adt7475_probe(struct i2c_client *client,
 
 eremove:
         sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+        if (data->has_voltage & 0x39)
+                sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
 efree:
         kfree(data);
         return ret;
@@ -1093,6 +1170,8 @@ static int adt7475_remove(struct i2c_client *client)
 
         hwmon_device_unregister(data->hwmon_dev);
         sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+        if (data->has_voltage & 0x39)
+                sysfs_remove_group(&client->dev.kobj, &adt7490_attr_group);
         kfree(data);
 
         return 0;
@@ -1177,7 +1256,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
 {
         struct i2c_client *client = to_i2c_client(dev);
         struct adt7475_data *data = i2c_get_clientdata(client);
-        u8 ext;
+        u16 ext;
         int i;
 
         mutex_lock(&data->lock);
@@ -1188,7 +1267,8 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
                 data->alarms = adt7475_read(REG_STATUS2) << 8;
                 data->alarms |= adt7475_read(REG_STATUS1);
 
-                ext = adt7475_read(REG_EXTEND1);
+                ext = (adt7475_read(REG_EXTEND2) << 8) |
+                        adt7475_read(REG_EXTEND1);
                 for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
                         if (!(data->has_voltage & (1 << i)))
                                 continue;
@@ -1197,11 +1277,17 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
                                 ((ext >> (i * 2)) & 3);
                 }
 
-                ext = adt7475_read(REG_EXTEND2);
                 for (i = 0; i < ADT7475_TEMP_COUNT; i++)
                         data->temp[INPUT][i] =
                                 (adt7475_read(TEMP_REG(i)) << 2) |
-                                ((ext >> ((i + 1) * 2)) & 3);
+                                ((ext >> ((i + 5) * 2)) & 3);
+
+                if (data->has_voltage & (1 << 5)) {
+                        data->alarms |= adt7475_read(REG_STATUS4) << 24;
+                        ext = adt7475_read(REG_EXTEND3);
+                        data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
+                                ((ext >> 4) & 3);
+                }
 
                 for (i = 0; i < ADT7475_TACH_COUNT; i++)
                         data->tach[INPUT][i] =
@@ -1230,6 +1316,11 @@ static struct adt7475_data *adt7475_update_device(struct device *dev)
                                 adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
                 }
 
+                if (data->has_voltage & (1 << 5)) {
+                        data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
+                        data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
+                }
+
                 for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
                         /* Adjust values so they match the input precision */
                         data->temp[MIN][i] =