hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval

The attribute reflects an interval, not a rate.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 24 insertions, 19 deletions

diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 15c1a9616af3..0683e6be662c 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -79,7 +79,7 @@ struct adm1031_data {
         int chip_type;
         char valid;             /* !=0 if following fields are valid */
         unsigned long last_updated;     /* In jiffies */
-        unsigned int update_rate;       /* In milliseconds */
+        unsigned int update_interval;   /* In milliseconds */
         /* The chan_select_table contains the possible configurations for
          * auto fan control.
          */
@@ -743,23 +743,23 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
 
-/* Update Rate */
-static const unsigned int update_rates[] = {
+/* Update Interval */
+static const unsigned int update_intervals[] = {
         16000, 8000, 4000, 2000, 1000, 500, 250, 125,
 };
 
-static ssize_t show_update_rate(struct device *dev,
-                                struct device_attribute *attr, char *buf)
+static ssize_t show_update_interval(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
 {
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1031_data *data = i2c_get_clientdata(client);
 
-        return sprintf(buf, "%u\n", data->update_rate);
+        return sprintf(buf, "%u\n", data->update_interval);
 }
 
-static ssize_t set_update_rate(struct device *dev,
-                               struct device_attribute *attr,
-                               const char *buf, size_t count)
+static ssize_t set_update_interval(struct device *dev,
+                                   struct device_attribute *attr,
+                                   const char *buf, size_t count)
 {
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1031_data *data = i2c_get_clientdata(client);
@@ -771,12 +771,15 @@ static ssize_t set_update_rate(struct device *dev,
         if (err)
                 return err;
 
-        /* find the nearest update rate from the table */
-        for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) {
-                if (val >= update_rates[i])
+        /*
+         * Find the nearest update interval from the table.
+         * Use it to determine the matching update rate.
+         */
+        for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) {
+                if (val >= update_intervals[i])
                         break;
         }
-        /* if not found, we point to the last entry (lowest update rate) */
+        /* if not found, we point to the last entry (lowest update interval) */
 
         /* set the new update rate while preserving other settings */
         reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
@@ -785,14 +788,14 @@ static ssize_t set_update_rate(struct device *dev,
         adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);
 
         mutex_lock(&data->update_lock);
-        data->update_rate = update_rates[i];
+        data->update_interval = update_intervals[i];
         mutex_unlock(&data->update_lock);
 
         return count;
 }
 
-static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate,
-                   set_update_rate);
+static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
+                   set_update_interval);
 
 static struct attribute *adm1031_attributes[] = {
         &sensor_dev_attr_fan1_input.dev_attr.attr,
@@ -830,7 +833,7 @@ static struct attribute *adm1031_attributes[] = {
 
         &sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,
 
-        &dev_attr_update_rate.attr,
+        &dev_attr_update_interval.attr,
         &dev_attr_alarms.attr,
 
         NULL
@@ -981,7 +984,8 @@ static void adm1031_init_client(struct i2c_client *client)
         mask = ADM1031_UPDATE_RATE_MASK;
         read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
         i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
-        data->update_rate = update_rates[i];
+        /* Save it as update interval */
+        data->update_interval = update_intervals[i];
 }
 
 static struct adm1031_data *adm1031_update_device(struct device *dev)
@@ -993,7 +997,8 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
 
         mutex_lock(&data->update_lock);
 
-        next_update = data->last_updated + msecs_to_jiffies(data->update_rate);
+        next_update = data->last_updated
+          + msecs_to_jiffies(data->update_interval);
         if (time_after(jiffies, next_update) || !data->valid) {
 
                 dev_dbg(&client->dev, "Starting adm1031 update\n");