hwmon: (adm1026) Whitespace cleanups

Whitespace cleanups only:
* Trim trailing whitespace.
* Use tabs for indentation and alignment.
* Add missing space after commas.
* Remove extra spaces.

No functional change, binary is identical before and after this patch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

1 files changed, 227 insertions, 224 deletions

diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 69b7bc411c1f..9f44ed7ebb7b 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -40,8 +40,8 @@ static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(adm1026);
 
-static int gpio_input[17]  = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
-                                -1, -1, -1, -1, -1, -1, -1, -1 }; 
+static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+                                -1, -1, -1, -1, -1, -1, -1, -1 };
 static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
                                 -1, -1, -1, -1, -1, -1, -1, -1 };
 static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
@@ -49,46 +49,49 @@ static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
 static int gpio_normal[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
                                 -1, -1, -1, -1, -1, -1, -1, -1 };
 static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 };
-module_param_array(gpio_input,int,NULL,0);
-MODULE_PARM_DESC(gpio_input,"List of GPIO pins (0-16) to program as inputs");
-module_param_array(gpio_output,int,NULL,0);
-MODULE_PARM_DESC(gpio_output,"List of GPIO pins (0-16) to program as "
+module_param_array(gpio_input, int, NULL, 0);
+MODULE_PARM_DESC(gpio_input, "List of GPIO pins (0-16) to program as inputs");
+module_param_array(gpio_output, int, NULL, 0);
+MODULE_PARM_DESC(gpio_output, "List of GPIO pins (0-16) to program as "
         "outputs");
-module_param_array(gpio_inverted,int,NULL,0);
-MODULE_PARM_DESC(gpio_inverted,"List of GPIO pins (0-16) to program as "
+module_param_array(gpio_inverted, int, NULL, 0);
+MODULE_PARM_DESC(gpio_inverted, "List of GPIO pins (0-16) to program as "
         "inverted");
-module_param_array(gpio_normal,int,NULL,0);
-MODULE_PARM_DESC(gpio_normal,"List of GPIO pins (0-16) to program as "
+module_param_array(gpio_normal, int, NULL, 0);
+MODULE_PARM_DESC(gpio_normal, "List of GPIO pins (0-16) to program as "
         "normal/non-inverted");
-module_param_array(gpio_fan,int,NULL,0);
-MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs");
+module_param_array(gpio_fan, int, NULL, 0);
+MODULE_PARM_DESC(gpio_fan, "List of GPIO pins (0-7) to program as fan tachs");
 
 /* Many ADM1026 constants specified below */
 
 /* The ADM1026 registers */
-#define ADM1026_REG_CONFIG1  0x00
-#define CFG1_MONITOR     0x01
-#define CFG1_INT_ENABLE  0x02
-#define CFG1_INT_CLEAR   0x04
-#define CFG1_AIN8_9      0x08
-#define CFG1_THERM_HOT   0x10
-#define CFG1_DAC_AFC     0x20
-#define CFG1_PWM_AFC     0x40
-#define CFG1_RESET       0x80
-#define ADM1026_REG_CONFIG2  0x01
+#define ADM1026_REG_CONFIG1     0x00
+#define CFG1_MONITOR            0x01
+#define CFG1_INT_ENABLE         0x02
+#define CFG1_INT_CLEAR          0x04
+#define CFG1_AIN8_9             0x08
+#define CFG1_THERM_HOT          0x10
+#define CFG1_DAC_AFC            0x20
+#define CFG1_PWM_AFC            0x40
+#define CFG1_RESET              0x80
+
+#define ADM1026_REG_CONFIG2     0x01
 /* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */
-#define ADM1026_REG_CONFIG3  0x07
-#define CFG3_GPIO16_ENABLE  0x01
-#define CFG3_CI_CLEAR  0x02
-#define CFG3_VREF_250  0x04
-#define CFG3_GPIO16_DIR  0x40
-#define CFG3_GPIO16_POL  0x80
-#define ADM1026_REG_E2CONFIG  0x13
-#define E2CFG_READ  0x01
-#define E2CFG_WRITE  0x02
-#define E2CFG_ERASE  0x04
-#define E2CFG_ROM  0x08
-#define E2CFG_CLK_EXT  0x80
+
+#define ADM1026_REG_CONFIG3     0x07
+#define CFG3_GPIO16_ENABLE      0x01
+#define CFG3_CI_CLEAR           0x02
+#define CFG3_VREF_250           0x04
+#define CFG3_GPIO16_DIR         0x40
+#define CFG3_GPIO16_POL         0x80
+
+#define ADM1026_REG_E2CONFIG    0x13
+#define E2CFG_READ              0x01
+#define E2CFG_WRITE             0x02
+#define E2CFG_ERASE             0x04
+#define E2CFG_ROM               0x08
+#define E2CFG_CLK_EXT           0x80
 
 /* There are 10 general analog inputs and 7 dedicated inputs
  * They are:
@@ -129,48 +132,48 @@ static u16 ADM1026_REG_TEMP_TMIN[] = { 0x10, 0x11, 0x12 };
 static u16 ADM1026_REG_TEMP_THERM[] = { 0x0d, 0x0e, 0x0f };
 static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
 
-#define ADM1026_REG_FAN(nr) (0x38 + (nr))
-#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr))
-#define ADM1026_REG_FAN_DIV_0_3 0x02
-#define ADM1026_REG_FAN_DIV_4_7 0x03
+#define ADM1026_REG_FAN(nr)             (0x38 + (nr))
+#define ADM1026_REG_FAN_MIN(nr)         (0x60 + (nr))
+#define ADM1026_REG_FAN_DIV_0_3         0x02
+#define ADM1026_REG_FAN_DIV_4_7         0x03
 
-#define ADM1026_REG_DAC  0x04
-#define ADM1026_REG_PWM  0x05
+#define ADM1026_REG_DAC                 0x04
+#define ADM1026_REG_PWM                 0x05
 
-#define ADM1026_REG_GPIO_CFG_0_3 0x08
-#define ADM1026_REG_GPIO_CFG_4_7 0x09
-#define ADM1026_REG_GPIO_CFG_8_11 0x0a
-#define ADM1026_REG_GPIO_CFG_12_15 0x0b
+#define ADM1026_REG_GPIO_CFG_0_3        0x08
+#define ADM1026_REG_GPIO_CFG_4_7        0x09
+#define ADM1026_REG_GPIO_CFG_8_11       0x0a
+#define ADM1026_REG_GPIO_CFG_12_15      0x0b
 /* CFG_16 in REG_CFG3 */
-#define ADM1026_REG_GPIO_STATUS_0_7 0x24
-#define ADM1026_REG_GPIO_STATUS_8_15 0x25
+#define ADM1026_REG_GPIO_STATUS_0_7     0x24
+#define ADM1026_REG_GPIO_STATUS_8_15    0x25
 /* STATUS_16 in REG_STATUS4 */
-#define ADM1026_REG_GPIO_MASK_0_7 0x1c
-#define ADM1026_REG_GPIO_MASK_8_15 0x1d
+#define ADM1026_REG_GPIO_MASK_0_7       0x1c
+#define ADM1026_REG_GPIO_MASK_8_15      0x1d
 /* MASK_16 in REG_MASK4 */
 
-#define ADM1026_REG_COMPANY 0x16
-#define ADM1026_REG_VERSTEP 0x17
+#define ADM1026_REG_COMPANY             0x16
+#define ADM1026_REG_VERSTEP             0x17
 /* These are the recognized values for the above regs */
-#define ADM1026_COMPANY_ANALOG_DEV 0x41
-#define ADM1026_VERSTEP_GENERIC 0x40
-#define ADM1026_VERSTEP_ADM1026 0x44
+#define ADM1026_COMPANY_ANALOG_DEV      0x41
+#define ADM1026_VERSTEP_GENERIC         0x40
+#define ADM1026_VERSTEP_ADM1026         0x44
 
-#define ADM1026_REG_MASK1 0x18
-#define ADM1026_REG_MASK2 0x19
-#define ADM1026_REG_MASK3 0x1a
-#define ADM1026_REG_MASK4 0x1b
+#define ADM1026_REG_MASK1               0x18
+#define ADM1026_REG_MASK2               0x19
+#define ADM1026_REG_MASK3               0x1a
+#define ADM1026_REG_MASK4               0x1b
 
-#define ADM1026_REG_STATUS1 0x20
-#define ADM1026_REG_STATUS2 0x21
-#define ADM1026_REG_STATUS3 0x22
-#define ADM1026_REG_STATUS4 0x23
+#define ADM1026_REG_STATUS1             0x20
+#define ADM1026_REG_STATUS2             0x21
+#define ADM1026_REG_STATUS3             0x22
+#define ADM1026_REG_STATUS4             0x23
 
 #define ADM1026_FAN_ACTIVATION_TEMP_HYST -6
-#define ADM1026_FAN_CONTROL_TEMP_RANGE 20
-#define ADM1026_PWM_MAX 255
+#define ADM1026_FAN_CONTROL_TEMP_RANGE  20
+#define ADM1026_PWM_MAX                 255
 
-/* Conversions. Rounding and limit checking is only done on the TO_REG 
+/* Conversions. Rounding and limit checking is only done on the TO_REG
  * variants. Note that you should be a bit careful with which arguments
  * these macros are called: arguments may be evaluated more than once.
  */
@@ -186,47 +189,47 @@ static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
  * The values in this table are based on Table II, page 15 of the
  *    datasheet.
  */
-static int adm1026_scaling[] = {  /* .001 Volts */
-                2250, 2250, 2250, 2250, 2250, 2250, 
-                1875, 1875, 1875, 1875, 3000, 3330, 
+static int adm1026_scaling[] = { /* .001 Volts */
+                2250, 2250, 2250, 2250, 2250, 2250,
+                1875, 1875, 1875, 1875, 3000, 3330,
                 3330, 4995, 2250, 12000, 13875
         };
 #define NEG12_OFFSET  16000
-#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n,val)  (SENSORS_LIMIT(SCALE(val,adm1026_scaling[n],192),\
-        0,255))
-#define INS_FROM_REG(n,val) (SCALE(val,192,adm1026_scaling[n]))
+#define SCALE(val, from, to) (((val)*(to) + ((from)/2))/(from))
+#define INS_TO_REG(n, val)  (SENSORS_LIMIT(SCALE(val, adm1026_scaling[n], 192),\
+        0, 255))
+#define INS_FROM_REG(n, val) (SCALE(val, 192, adm1026_scaling[n]))
 
 /* FAN speed is measured using 22.5kHz clock and counts for 2 pulses
  *   and we assume a 2 pulse-per-rev fan tach signal
  *      22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000
  */
-#define FAN_TO_REG(val,div)  ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\
-        (div)),1,254)) 
-#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\
-        (div)))
+#define FAN_TO_REG(val, div)  ((val) <= 0 ? 0xff : \
+                                SENSORS_LIMIT(1350000/((val)*(div)), 1, 254))
+#define FAN_FROM_REG(val, div) ((val) == 0 ? -1:(val) == 0xff ? 0 : \
+                                1350000/((val)*(div)))
 #define DIV_FROM_REG(val) (1<<(val))
-#define DIV_TO_REG(val) ((val)>=8 ? 3 : (val)>=4 ? 2 : (val)>=2 ? 1 : 0)
+#define DIV_TO_REG(val) ((val) >= 8 ? 3 : (val) >= 4 ? 2 : (val) >= 2 ? 1 : 0)
 
 /* Temperature is reported in 1 degC increments */
 #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
-        -127,127))
+        -127, 127))
 #define TEMP_FROM_REG(val) ((val) * 1000)
 #define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
-        -127,127))
+        -127, 127))
 #define OFFSET_FROM_REG(val) ((val) * 1000)
 
-#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
+#define PWM_TO_REG(val) (SENSORS_LIMIT(val, 0, 255))
 #define PWM_FROM_REG(val) (val)
 
 #define PWM_MIN_TO_REG(val) ((val) & 0xf0)
 #define PWM_MIN_FROM_REG(val) (((val) & 0xf0) + ((val) >> 4))
 
-/* Analog output is a voltage, and scaled to millivolts.  The datasheet 
- *   indicates that the DAC could be used to drive the fans, but in our 
+/* Analog output is a voltage, and scaled to millivolts.  The datasheet
+ *   indicates that the DAC could be used to drive the fans, but in our
  *   example board (Arima HDAMA) it isn't connected to the fans at all.
  */
-#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500),0,255)) 
+#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500), 0, 255))
 #define DAC_FROM_REG(val) (((val)*2500)/255)
 
 /* Typically used with systems using a v9.1 VRM spec ? */
@@ -243,8 +246,8 @@ static int adm1026_scaling[] = {  /* .001 Volts */
  *    So, we keep the config data up to date in the cache
  *    when it is written and only sample it once every 5 *minutes*
  */
-#define ADM1026_DATA_INTERVAL  (1 * HZ)
-#define ADM1026_CONFIG_INTERVAL  (5 * 60 * HZ)
+#define ADM1026_DATA_INTERVAL           (1 * HZ)
+#define ADM1026_CONFIG_INTERVAL         (5 * 60 * HZ)
 
 /* We allow for multiple chips in a single system.
  *
@@ -268,30 +271,30 @@ struct adm1026_data {
         unsigned long last_reading;     /* In jiffies */
         unsigned long last_config;      /* In jiffies */
 
-        u8 in[17];              /* Register value */
-        u8 in_max[17];          /* Register value */
-        u8 in_min[17];          /* Register value */
-        s8 temp[3];             /* Register value */
-        s8 temp_min[3];         /* Register value */
-        s8 temp_max[3];         /* Register value */
-        s8 temp_tmin[3];        /* Register value */
-        s8 temp_crit[3];        /* Register value */
-        s8 temp_offset[3];      /* Register value */
-        u8 fan[8];              /* Register value */
-        u8 fan_min[8];          /* Register value */
-        u8 fan_div[8];          /* Decoded value */
-        struct pwm_data pwm1;   /* Pwm control values */
-        int vid;                /* Decoded value */
-        u8 vrm;                 /* VRM version */
+        u8 in[17];              /* Register value */
+        u8 in_max[17];          /* Register value */
+        u8 in_min[17];          /* Register value */
+        s8 temp[3];             /* Register value */
+        s8 temp_min[3];         /* Register value */
+        s8 temp_max[3];         /* Register value */
+        s8 temp_tmin[3];        /* Register value */
+        s8 temp_crit[3];        /* Register value */
+        s8 temp_offset[3];      /* Register value */
+        u8 fan[8];              /* Register value */
+        u8 fan_min[8];          /* Register value */
+        u8 fan_div[8];          /* Decoded value */
+        struct pwm_data pwm1;   /* Pwm control values */
+        int vid;                /* Decoded value */
+        u8 vrm;                 /* VRM version */
         u8 analog_out;          /* Register value (DAC) */
-        long alarms;            /* Register encoding, combined */
-        long alarm_mask;        /* Register encoding, combined */
-        long gpio;              /* Register encoding, combined */
-        long gpio_mask;         /* Register encoding, combined */
-        u8 gpio_config[17];     /* Decoded value */
-        u8 config1;             /* Register value */
-        u8 config2;             /* Register value */
-        u8 config3;             /* Register value */
+        long alarms;            /* Register encoding, combined */
+        long alarm_mask;        /* Register encoding, combined */
+        long gpio;              /* Register encoding, combined */
+        long gpio_mask;         /* Register encoding, combined */
+        u8 gpio_config[17];     /* Decoded value */
+        u8 config1;             /* Register value */
+        u8 config2;             /* Register value */
+        u8 config3;             /* Register value */
 };
 
 static int adm1026_attach_adapter(struct i2c_adapter *adapter);
@@ -301,7 +304,7 @@ static int adm1026_detach_client(struct i2c_client *client);
 static int adm1026_read_value(struct i2c_client *client, u8 reg);
 static int adm1026_write_value(struct i2c_client *client, u8 reg, int value);
 static void adm1026_print_gpio(struct i2c_client *client);
-static void adm1026_fixup_gpio(struct i2c_client *client); 
+static void adm1026_fixup_gpio(struct i2c_client *client);
 static struct adm1026_data *adm1026_update_device(struct device *dev);
 static void adm1026_init_client(struct i2c_client *client);
 
@@ -311,7 +314,7 @@ static struct i2c_driver adm1026_driver = {
                 .name   = "adm1026",
         },
         .attach_adapter = adm1026_attach_adapter,
-        .detach_client  = adm1026_detach_client,
+        .detach_client  = adm1026_detach_client,
 };
 
 static int adm1026_attach_adapter(struct i2c_adapter *adapter)
@@ -355,7 +358,7 @@ static void adm1026_init_client(struct i2c_client *client)
         int value, i;
         struct adm1026_data *data = i2c_get_clientdata(client);
 
-        dev_dbg(&client->dev, "Initializing device\n");
+        dev_dbg(&client->dev, "Initializing device\n");
         /* Read chip config */
         data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1);
         data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2);
@@ -426,10 +429,10 @@ static void adm1026_init_client(struct i2c_client *client)
          *   configured, we don't want to mess with them.
          *   If they weren't, the default is 100% PWM, no
          *   control and will suffice until 'sensors -s'
-         *   can be run by the user.  We DO set the default 
+         *   can be run by the user.  We DO set the default
          *   value for pwm1.auto_pwm_min to its maximum
          *   so that enabling automatic pwm fan control
-         *   without first setting a value for pwm1.auto_pwm_min 
+         *   without first setting a value for pwm1.auto_pwm_min
          *   will not result in potentially dangerous fan speed decrease.
          */
         data->pwm1.auto_pwm_min=255;
@@ -453,7 +456,7 @@ static void adm1026_init_client(struct i2c_client *client)
 static void adm1026_print_gpio(struct i2c_client *client)
 {
         struct adm1026_data *data = i2c_get_clientdata(client);
-        int  i;
+        int i;
 
         dev_dbg(&client->dev, "GPIO config is:");
         for (i = 0;i <= 7;++i) {
@@ -477,7 +480,7 @@ static void adm1026_print_gpio(struct i2c_client *client)
                         data->gpio_config[16] & 0x02 ? "" : "!",
                         data->gpio_config[16] & 0x01 ? "OUT" : "IN");
         } else {
-                /* GPIO16 is THERM  */
+                /* GPIO16 is THERM */
                 dev_dbg(&client->dev, "\tTHERM\n");
         }
 }
@@ -485,8 +488,8 @@ static void adm1026_print_gpio(struct i2c_client *client)
 static void adm1026_fixup_gpio(struct i2c_client *client)
 {
         struct adm1026_data *data = i2c_get_clientdata(client);
-        int  i;
-        int  value;
+        int i;
+        int value;
 
         /* Make the changes requested. */
         /* We may need to unlock/stop monitoring or soft-reset the
@@ -516,14 +519,14 @@ static void adm1026_fixup_gpio(struct i2c_client *client)
                 }
         }
 
-        /* Inverted  */
+        /* Inverted */
         for (i = 0;i <= 16;++i) {
                 if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) {
                         data->gpio_config[gpio_inverted[i]] &= ~ 0x02;
                 }
         }
 
-        /* Normal overrides inverted  */
+        /* Normal overrides inverted */
         for (i = 0;i <= 16;++i) {
                 if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) {
                         data->gpio_config[gpio_normal[i]] |= 0x02;
@@ -569,7 +572,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
         if (!data->valid
             || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
                 /* Things that change quickly */
-                dev_dbg(&client->dev,"Reading sensor values\n");
+                dev_dbg(&client->dev, "Reading sensor values\n");
                 for (i = 0;i <= 16;++i) {
                         data->in[i] =
                             adm1026_read_value(client, ADM1026_REG_IN[i]);
@@ -582,18 +585,18 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
 
                 for (i = 0;i <= 2;++i) {
                         /* NOTE: temp[] is s8 and we assume 2's complement
-                         *   "conversion" in the assignment   */
+                         *   "conversion" in the assignment */
                         data->temp[i] =
                             adm1026_read_value(client, ADM1026_REG_TEMP[i]);
                 }
 
-                data->pwm1.pwm = adm1026_read_value(client, 
+                data->pwm1.pwm = adm1026_read_value(client,
                         ADM1026_REG_PWM);
-                data->analog_out = adm1026_read_value(client, 
+                data->analog_out = adm1026_read_value(client,
                         ADM1026_REG_DAC);
                 /* GPIO16 is MSbit of alarms, move it to gpio */
                 alarms = adm1026_read_value(client, ADM1026_REG_STATUS4);
-                gpio = alarms & 0x80 ? 0x0100 : 0;  /* GPIO16 */
+                gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */
                 alarms &= 0x7f;
                 alarms <<= 8;
                 alarms |= adm1026_read_value(client, ADM1026_REG_STATUS3);
@@ -604,24 +607,24 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
                 data->alarms = alarms;
 
                 /* Read the GPIO values */
-                gpio |= adm1026_read_value(client, 
+                gpio |= adm1026_read_value(client,
                         ADM1026_REG_GPIO_STATUS_8_15);
                 gpio <<= 8;
-                gpio |= adm1026_read_value(client, 
+                gpio |= adm1026_read_value(client,
                         ADM1026_REG_GPIO_STATUS_0_7);
                 data->gpio = gpio;
 
                 data->last_reading = jiffies;
-        };  /* last_reading */
+        }; /* last_reading */
 
         if (!data->valid ||
             time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
                 /* Things that don't change often */
                 dev_dbg(&client->dev, "Reading config values\n");
                 for (i = 0;i <= 16;++i) {
-                        data->in_min[i] = adm1026_read_value(client, 
+                        data->in_min[i] = adm1026_read_value(client,
                                 ADM1026_REG_IN_MIN[i]);
-                        data->in_max[i] = adm1026_read_value(client, 
+                        data->in_max[i] = adm1026_read_value(client,
                                 ADM1026_REG_IN_MAX[i]);
                 }
 
@@ -629,32 +632,32 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
                         | (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7)
                         << 8);
                 for (i = 0;i <= 7;++i) {
-                        data->fan_min[i] = adm1026_read_value(client, 
+                        data->fan_min[i] = adm1026_read_value(client,
                                 ADM1026_REG_FAN_MIN(i));
                         data->fan_div[i] = DIV_FROM_REG(value & 0x03);
                         value >>= 2;
                 }
 
                 for (i = 0; i <= 2; ++i) {
-                        /* NOTE: temp_xxx[] are s8 and we assume 2's 
+                        /* NOTE: temp_xxx[] are s8 and we assume 2's
                          *    complement "conversion" in the assignment
                          */
-                        data->temp_min[i] = adm1026_read_value(client, 
+                        data->temp_min[i] = adm1026_read_value(client,
                                 ADM1026_REG_TEMP_MIN[i]);
-                        data->temp_max[i] = adm1026_read_value(client, 
+                        data->temp_max[i] = adm1026_read_value(client,
                                 ADM1026_REG_TEMP_MAX[i]);
-                        data->temp_tmin[i] = adm1026_read_value(client, 
+                        data->temp_tmin[i] = adm1026_read_value(client,
                                 ADM1026_REG_TEMP_TMIN[i]);
-                        data->temp_crit[i] = adm1026_read_value(client, 
+                        data->temp_crit[i] = adm1026_read_value(client,
                                 ADM1026_REG_TEMP_THERM[i]);
-                        data->temp_offset[i] = adm1026_read_value(client, 
+                        data->temp_offset[i] = adm1026_read_value(client,
                                 ADM1026_REG_TEMP_OFFSET[i]);
                 }
 
                 /* Read the STATUS/alarm masks */
-                alarms  = adm1026_read_value(client, ADM1026_REG_MASK4);
-                gpio    = alarms & 0x80 ? 0x0100 : 0;  /* GPIO16 */
-                alarms  = (alarms & 0x7f) << 8;
+                alarms = adm1026_read_value(client, ADM1026_REG_MASK4);
+                gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */
+                alarms = (alarms & 0x7f) << 8;
                 alarms |= adm1026_read_value(client, ADM1026_REG_MASK3);
                 alarms <<= 8;
                 alarms |= adm1026_read_value(client, ADM1026_REG_MASK2);
@@ -663,24 +666,24 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
                 data->alarm_mask = alarms;
 
                 /* Read the GPIO values */
-                gpio |= adm1026_read_value(client, 
+                gpio |= adm1026_read_value(client,
                         ADM1026_REG_GPIO_MASK_8_15);
                 gpio <<= 8;
                 gpio |= adm1026_read_value(client, ADM1026_REG_GPIO_MASK_0_7);
                 data->gpio_mask = gpio;
 
                 /* Read various values from CONFIG1 */
-                data->config1 = adm1026_read_value(client, 
+                data->config1 = adm1026_read_value(client,
                         ADM1026_REG_CONFIG1);
                 if (data->config1 & CFG1_PWM_AFC) {
                         data->pwm1.enable = 2;
-                        data->pwm1.auto_pwm_min = 
+                        data->pwm1.auto_pwm_min =
                                 PWM_MIN_FROM_REG(data->pwm1.pwm);
                 }
                 /* Read the GPIO config */
-                data->config2 = adm1026_read_value(client, 
+                data->config2 = adm1026_read_value(client,
                         ADM1026_REG_CONFIG2);
-                data->config3 = adm1026_read_value(client, 
+                data->config3 = adm1026_read_value(client,
                         ADM1026_REG_CONFIG3);
                 data->gpio_config[16] = (data->config3 >> 6) & 0x03;
 
@@ -695,7 +698,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev)
                 }
 
                 data->last_config = jiffies;
-        };  /* last_config */
+        }; /* last_config */
 
         dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
         data->vid = (data->gpio >> 11) & 0x1f;
@@ -710,15 +713,15 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]));
+        return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in[nr]));
 }
 static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
                 char *buf)
 {
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
-        struct adm1026_data *data = adm1026_update_device(dev); 
-        return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]));
+        struct adm1026_data *data = adm1026_update_device(dev);
+        return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
 }
 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
                 const char *buf, size_t count)
@@ -733,7 +736,7 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
         data->in_min[nr] = INS_TO_REG(nr, val);
         adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
         mutex_unlock(&data->update_lock);
-        return count; 
+        return count;
 }
 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
                 char *buf)
@@ -741,7 +744,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]));
+        return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
 }
 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
                 const char *buf, size_t count)
@@ -788,13 +791,13 @@ in_reg(15);
 static ssize_t show_in16(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in[16]) -
+        return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in[16]) -
                 NEG12_OFFSET);
 }
 static ssize_t show_in16_min(struct device *dev, struct device_attribute *attr, char *buf)
 {
-        struct adm1026_data *data = adm1026_update_device(dev); 
-        return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_min[16])
+        struct adm1026_data *data = adm1026_update_device(dev);
+        return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in_min[16])
                 - NEG12_OFFSET);
 }
 static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
@@ -807,12 +810,12 @@ static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, c
         data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
         adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
         mutex_unlock(&data->update_lock);
-        return count; 
+        return count;
 }
 static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_max[16])
+        return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in_max[16])
                         - NEG12_OFFSET);
 }
 static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
@@ -843,7 +846,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
+        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
                 data->fan_div[nr]));
 }
 static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
@@ -852,7 +855,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+        return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
                 data->fan_div[nr]));
 }
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
@@ -872,10 +875,10 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
         return count;
 }
 
-#define fan_offset(offset)                                                      \
-static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL,         \
-                offset - 1);                                                    \
-static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,                 \
+#define fan_offset(offset)                                              \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \
+                offset - 1);                                            \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,         \
                 show_fan_min, set_fan_min, offset - 1);
 
 fan_offset(1);
@@ -892,8 +895,8 @@ static void fixup_fan_min(struct device *dev, int fan, int old_div)
 {
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1026_data *data = i2c_get_clientdata(client);
-        int    new_min;
-        int    new_div = data->fan_div[fan];
+        int new_min;
+        int new_div = data->fan_div[fan];
 
         /* 0 and 0xff are special.  Don't adjust them */
         if (data->fan_min[fan] == 0 || data->fan_min[fan] == 0xff) {
@@ -913,7 +916,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", data->fan_div[nr]);
+        return sprintf(buf, "%d\n", data->fan_div[nr]);
 }
 static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
                 const char *buf, size_t count)
@@ -922,10 +925,10 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
         int nr = sensor_attr->index;
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1026_data *data = i2c_get_clientdata(client);
-        int    val,orig_div,new_div,shift;
+        int val, orig_div, new_div, shift;
 
         val = simple_strtol(buf, NULL, 10);
-        new_div = DIV_TO_REG(val); 
+        new_div = DIV_TO_REG(val);
         if (new_div == 0) {
                 return -EINVAL;
         }
@@ -946,14 +949,14 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
         }
 
         if (data->fan_div[nr] != orig_div) {
-                fixup_fan_min(dev,nr,orig_div);
+                fixup_fan_min(dev, nr, orig_div);
         }
         mutex_unlock(&data->update_lock);
         return count;
 }
 
-#define fan_offset_div(offset)                                          \
-static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,         \
+#define fan_offset_div(offset)                                          \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,         \
                 show_fan_div, set_fan_div, offset - 1);
 
 fan_offset_div(1);
@@ -972,7 +975,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
 }
 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
                 char *buf)
@@ -980,7 +983,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
 }
 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
                 const char *buf, size_t count)
@@ -1004,7 +1007,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
 }
 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
                 const char *buf, size_t count)
@@ -1024,7 +1027,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 }
 
 #define temp_reg(offset)                                                \
-static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,     \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,     \
                 NULL, offset - 1);                                      \
 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
                 show_temp_min, set_temp_min, offset - 1);               \
@@ -1042,7 +1045,7 @@ static ssize_t show_temp_offset(struct device *dev,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_offset[nr]));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_offset[nr]));
 }
 static ssize_t set_temp_offset(struct device *dev,
                 struct device_attribute *attr, const char *buf,
@@ -1076,7 +1079,7 @@ static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(
                 ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr]));
 }
 static ssize_t show_temp_auto_point2_temp(struct device *dev,
@@ -1085,7 +1088,7 @@ static ssize_t show_temp_auto_point2_temp(struct device *dev,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr] +
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_tmin[nr] +
                 ADM1026_FAN_CONTROL_TEMP_RANGE));
 }
 static ssize_t show_temp_auto_point1_temp(struct device *dev,
@@ -1094,7 +1097,7 @@ static ssize_t show_temp_auto_point1_temp(struct device *dev,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr]));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_tmin[nr]));
 }
 static ssize_t set_temp_auto_point1_temp(struct device *dev,
                 struct device_attribute *attr, const char *buf, size_t count)
@@ -1113,13 +1116,13 @@ static ssize_t set_temp_auto_point1_temp(struct device *dev,
         return count;
 }
 
-#define temp_auto_point(offset)                                                 \
-static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR,   \
-                show_temp_auto_point1_temp, set_temp_auto_point1_temp,          \
-                offset - 1);                                                    \
-static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,        \
-                show_temp_auto_point1_temp_hyst, NULL, offset - 1);             \
-static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO,             \
+#define temp_auto_point(offset)                                         \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp,              \
+                S_IRUGO | S_IWUSR, show_temp_auto_point1_temp,          \
+                set_temp_auto_point1_temp, offset - 1);                 \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,\
+                show_temp_auto_point1_temp_hyst, NULL, offset - 1);     \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO,     \
                 show_temp_auto_point2_temp, NULL, offset - 1);
 
 temp_auto_point(1);
@@ -1130,7 +1133,7 @@ static ssize_t show_temp_crit_enable(struct device *dev,
                 struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", (data->config1 & CFG1_THERM_HOT) >> 4);
+        return sprintf(buf, "%d\n", (data->config1 & CFG1_THERM_HOT) >> 4);
 }
 static ssize_t set_temp_crit_enable(struct device *dev,
                 struct device_attribute *attr, const char *buf, size_t count)
@@ -1142,7 +1145,7 @@ static ssize_t set_temp_crit_enable(struct device *dev,
         if ((val == 1) || (val==0)) {
                 mutex_lock(&data->update_lock);
                 data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4);
-                adm1026_write_value(client, ADM1026_REG_CONFIG1, 
+                adm1026_write_value(client, ADM1026_REG_CONFIG1,
                         data->config1);
                 mutex_unlock(&data->update_lock);
         }
@@ -1163,7 +1166,7 @@ static ssize_t show_temp_crit(struct device *dev,
         struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
         int nr = sensor_attr->index;
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
 }
 static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr,
                 const char *buf, size_t count)
@@ -1193,7 +1196,7 @@ temp_crit_reg(3);
 static ssize_t show_analog_out_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", DAC_FROM_REG(data->analog_out));
+        return sprintf(buf, "%d\n", DAC_FROM_REG(data->analog_out));
 }
 static ssize_t set_analog_out_reg(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1209,20 +1212,20 @@ static ssize_t set_analog_out_reg(struct device *dev, struct device_attribute *a
         return count;
 }
 
-static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg, 
+static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg,
         set_analog_out_reg);
 
 static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
+        return sprintf(buf, "%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
 }
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
 
 static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = dev_get_drvdata(dev);
-        return sprintf(buf,"%d\n", data->vrm);
+        return sprintf(buf, "%d\n", data->vrm);
 }
 static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1284,7 +1287,7 @@ static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 26);
 static ssize_t show_alarm_mask(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%ld\n", data->alarm_mask);
+        return sprintf(buf, "%ld\n", data->alarm_mask);
 }
 static ssize_t set_alarm_mask(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1320,7 +1323,7 @@ static DEVICE_ATTR(alarm_mask, S_IRUGO | S_IWUSR, show_alarm_mask,
 static ssize_t show_gpio(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%ld\n", data->gpio);
+        return sprintf(buf, "%ld\n", data->gpio);
 }
 static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1328,16 +1331,16 @@ static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1026_data *data = i2c_get_clientdata(client);
         int val = simple_strtol(buf, NULL, 10);
-        long   gpio;
+        long gpio;
 
         mutex_lock(&data->update_lock);
         data->gpio = val & 0x1ffff;
         gpio = data->gpio;
-        adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff);
+        adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7, gpio & 0xff);
         gpio >>= 8;
-        adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff);
+        adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15, gpio & 0xff);
         gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f);
-        adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff);
+        adm1026_write_value(client, ADM1026_REG_STATUS4, gpio & 0xff);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -1348,7 +1351,7 @@ static DEVICE_ATTR(gpio, S_IRUGO | S_IWUSR, show_gpio, set_gpio);
 static ssize_t show_gpio_mask(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%ld\n", data->gpio_mask);
+        return sprintf(buf, "%ld\n", data->gpio_mask);
 }
 static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1356,16 +1359,16 @@ static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr,
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1026_data *data = i2c_get_clientdata(client);
         int val = simple_strtol(buf, NULL, 10);
-        long   mask;
+        long mask;
 
         mutex_lock(&data->update_lock);
         data->gpio_mask = val & 0x1ffff;
         mask = data->gpio_mask;
-        adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff);
+        adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7, mask & 0xff);
         mask >>= 8;
-        adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff);
+        adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15, mask & 0xff);
         mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f);
-        adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff);
+        adm1026_write_value(client, ADM1026_REG_MASK1, mask & 0xff);
         mutex_unlock(&data->update_lock);
         return count;
 }
@@ -1375,7 +1378,7 @@ static DEVICE_ATTR(gpio_mask, S_IRUGO | S_IWUSR, show_gpio_mask, set_gpio_mask);
 static ssize_t show_pwm_reg(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm1.pwm));
+        return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm1.pwm));
 }
 static ssize_t set_pwm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1396,7 +1399,7 @@ static ssize_t set_pwm_reg(struct device *dev, struct device_attribute *attr, co
 static ssize_t show_auto_pwm_min(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", data->pwm1.auto_pwm_min);
+        return sprintf(buf, "%d\n", data->pwm1.auto_pwm_min);
 }
 static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1406,10 +1409,10 @@ static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *att
         int val = simple_strtol(buf, NULL, 10);
 
         mutex_lock(&data->update_lock);
-        data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255);
+        data->pwm1.auto_pwm_min = SENSORS_LIMIT(val, 0, 255);
         if (data->pwm1.enable == 2) { /* apply immediately */
                 data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
-                        PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
+                        PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
                 adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
         }
         mutex_unlock(&data->update_lock);
@@ -1417,12 +1420,12 @@ static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *att
 }
 static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf)
 {
-        return sprintf(buf,"%d\n", ADM1026_PWM_MAX);
+        return sprintf(buf, "%d\n", ADM1026_PWM_MAX);
 }
 static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
 {
         struct adm1026_data *data = adm1026_update_device(dev);
-        return sprintf(buf,"%d\n", data->pwm1.enable);
+        return sprintf(buf, "%d\n", data->pwm1.enable);
 }
 static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf,
                 size_t count)
@@ -1430,7 +1433,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
         struct i2c_client *client = to_i2c_client(dev);
         struct adm1026_data *data = i2c_get_clientdata(client);
         int val = simple_strtol(buf, NULL, 10);
-        int     old_enable;
+        int old_enable;
 
         if ((val >= 0) && (val < 3)) {
                 mutex_lock(&data->update_lock);
@@ -1440,15 +1443,15 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
                                 | ((val == 2) ? CFG1_PWM_AFC : 0);
                 adm1026_write_value(client, ADM1026_REG_CONFIG1,
                         data->config1);
-                if (val == 2) {  /* apply pwm1_auto_pwm_min to pwm1 */
+                if (val == 2) { /* apply pwm1_auto_pwm_min to pwm1 */
                         data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
-                                PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); 
-                        adm1026_write_value(client, ADM1026_REG_PWM, 
+                                PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
+                        adm1026_write_value(client, ADM1026_REG_PWM,
                                 data->pwm1.pwm);
                 } else if (!((old_enable == 1) && (val == 1))) {
                         /* set pwm to safe value */
                         data->pwm1.pwm = 255;
-                        adm1026_write_value(client, ADM1026_REG_PWM, 
+                        adm1026_write_value(client, ADM1026_REG_PWM,
                                 data->pwm1.pwm);
                 }
                 mutex_unlock(&data->update_lock);
@@ -1457,20 +1460,20 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
 }
 
 /* enable PWM fan control */
-static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
-static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
-static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); 
-static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
+static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
+static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
         set_pwm_enable);
-static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
         set_pwm_enable);
-static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable, 
+static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
         set_pwm_enable);
-static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR,
         show_auto_pwm_min, set_auto_pwm_min);
-static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR,
         show_auto_pwm_min, set_auto_pwm_min);
-static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR, 
+static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR,
         show_auto_pwm_min, set_auto_pwm_min);
 
 static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
@@ -1695,7 +1698,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address,
                         dev_dbg(&new_client->dev, ": Autodetection "
                                 "failed\n");
                         /* Not an ADM1026 ... */
-                        if (kind == 0)  { /* User used force=x,y */
+                        if (kind == 0) { /* User used force=x,y */
                                 dev_err(&adapter->dev, "Generic ADM1026 not "
                                         "found at %d,0x%02x.  Try "
                                         "force_adm1026.\n",
@@ -1775,14 +1778,14 @@ static int __init sm_adm1026_init(void)
         return i2c_add_driver(&adm1026_driver);
 }
 
-static void  __exit sm_adm1026_exit(void)
+static void __exit sm_adm1026_exit(void)
 {
         i2c_del_driver(&adm1026_driver);
 }
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
-              "Justin Thiessen <jthiessen@penguincomputing.com>");
+              "Justin Thiessen <jthiessen@penguincomputing.com>");
 MODULE_DESCRIPTION("ADM1026 driver");
 
 module_init(sm_adm1026_init);