diff options
author | Tony Luck <tony.luck@intel.com> | 2005-07-13 15:15:43 -0400 |
---|---|---|
committer | Tony Luck <tony.luck@intel.com> | 2005-07-13 15:15:43 -0400 |
commit | 99ad25a313bda566a346b46a6015afa65bc0a02b (patch) | |
tree | b9443fed1ab74f320c4ee0791864ee96d7c069df /drivers/hwmon/adm1025.c | |
parent | f62c4a96f74d6c6dd56d1742697e94a5c2085e87 (diff) | |
parent | 9a556e89081b0c1c2f83cee915363b15a68a6f2d (diff) |
Auto merge with /home/aegl/GIT/linus
Diffstat (limited to 'drivers/hwmon/adm1025.c')
-rw-r--r-- | drivers/hwmon/adm1025.c | 577 |
1 files changed, 577 insertions, 0 deletions
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c new file mode 100644 index 000000000000..e452d0daf906 --- /dev/null +++ b/drivers/hwmon/adm1025.c | |||
@@ -0,0 +1,577 @@ | |||
1 | /* | ||
2 | * adm1025.c | ||
3 | * | ||
4 | * Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com> | ||
5 | * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> | ||
6 | * | ||
7 | * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6 | ||
8 | * voltages (including its own power source) and up to two temperatures | ||
9 | * (its own plus up to one external one). Voltages are scaled internally | ||
10 | * (which is not the common way) with ratios such that the nominal value | ||
11 | * of each voltage correspond to a register value of 192 (which means a | ||
12 | * resolution of about 0.5% of the nominal value). Temperature values are | ||
13 | * reported with a 1 deg resolution and a 3 deg accuracy. Complete | ||
14 | * datasheet can be obtained from Analog's website at: | ||
15 | * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html | ||
16 | * | ||
17 | * This driver also supports the ADM1025A, which differs from the ADM1025 | ||
18 | * only in that it has "open-drain VID inputs while the ADM1025 has | ||
19 | * on-chip 100k pull-ups on the VID inputs". It doesn't make any | ||
20 | * difference for us. | ||
21 | * | ||
22 | * This driver also supports the NE1619, a sensor chip made by Philips. | ||
23 | * That chip is similar to the ADM1025A, with a few differences. The only | ||
24 | * difference that matters to us is that the NE1619 has only two possible | ||
25 | * addresses while the ADM1025A has a third one. Complete datasheet can be | ||
26 | * obtained from Philips's website at: | ||
27 | * http://www.semiconductors.philips.com/pip/NE1619DS.html | ||
28 | * | ||
29 | * Since the ADM1025 was the first chipset supported by this driver, most | ||
30 | * comments will refer to this chipset, but are actually general and | ||
31 | * concern all supported chipsets, unless mentioned otherwise. | ||
32 | * | ||
33 | * This program is free software; you can redistribute it and/or modify | ||
34 | * it under the terms of the GNU General Public License as published by | ||
35 | * the Free Software Foundation; either version 2 of the License, or | ||
36 | * (at your option) any later version. | ||
37 | * | ||
38 | * This program is distributed in the hope that it will be useful, | ||
39 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
40 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
41 | * GNU General Public License for more details. | ||
42 | * | ||
43 | * You should have received a copy of the GNU General Public License | ||
44 | * along with this program; if not, write to the Free Software | ||
45 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | ||
46 | */ | ||
47 | |||
48 | #include <linux/module.h> | ||
49 | #include <linux/init.h> | ||
50 | #include <linux/slab.h> | ||
51 | #include <linux/jiffies.h> | ||
52 | #include <linux/i2c.h> | ||
53 | #include <linux/i2c-sensor.h> | ||
54 | #include <linux/i2c-vid.h> | ||
55 | |||
56 | /* | ||
57 | * Addresses to scan | ||
58 | * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e. | ||
59 | * NE1619 has two possible addresses: 0x2c and 0x2d. | ||
60 | */ | ||
61 | |||
62 | static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; | ||
63 | static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; | ||
64 | |||
65 | /* | ||
66 | * Insmod parameters | ||
67 | */ | ||
68 | |||
69 | SENSORS_INSMOD_2(adm1025, ne1619); | ||
70 | |||
71 | /* | ||
72 | * The ADM1025 registers | ||
73 | */ | ||
74 | |||
75 | #define ADM1025_REG_MAN_ID 0x3E | ||
76 | #define ADM1025_REG_CHIP_ID 0x3F | ||
77 | #define ADM1025_REG_CONFIG 0x40 | ||
78 | #define ADM1025_REG_STATUS1 0x41 | ||
79 | #define ADM1025_REG_STATUS2 0x42 | ||
80 | #define ADM1025_REG_IN(nr) (0x20 + (nr)) | ||
81 | #define ADM1025_REG_IN_MAX(nr) (0x2B + (nr) * 2) | ||
82 | #define ADM1025_REG_IN_MIN(nr) (0x2C + (nr) * 2) | ||
83 | #define ADM1025_REG_TEMP(nr) (0x26 + (nr)) | ||
84 | #define ADM1025_REG_TEMP_HIGH(nr) (0x37 + (nr) * 2) | ||
85 | #define ADM1025_REG_TEMP_LOW(nr) (0x38 + (nr) * 2) | ||
86 | #define ADM1025_REG_VID 0x47 | ||
87 | #define ADM1025_REG_VID4 0x49 | ||
88 | |||
89 | /* | ||
90 | * Conversions and various macros | ||
91 | * The ADM1025 uses signed 8-bit values for temperatures. | ||
92 | */ | ||
93 | |||
94 | static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 }; | ||
95 | |||
96 | #define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192) | ||
97 | #define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \ | ||
98 | (val) * 192 >= (scale) * 255 ? 255 : \ | ||
99 | ((val) * 192 + (scale)/2) / (scale)) | ||
100 | |||
101 | #define TEMP_FROM_REG(reg) ((reg) * 1000) | ||
102 | #define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \ | ||
103 | (val) >= 126500 ? 127 : \ | ||
104 | (((val) < 0 ? (val)-500 : (val)+500) / 1000)) | ||
105 | |||
106 | /* | ||
107 | * Functions declaration | ||
108 | */ | ||
109 | |||
110 | static int adm1025_attach_adapter(struct i2c_adapter *adapter); | ||
111 | static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind); | ||
112 | static void adm1025_init_client(struct i2c_client *client); | ||
113 | static int adm1025_detach_client(struct i2c_client *client); | ||
114 | static struct adm1025_data *adm1025_update_device(struct device *dev); | ||
115 | |||
116 | /* | ||
117 | * Driver data (common to all clients) | ||
118 | */ | ||
119 | |||
120 | static struct i2c_driver adm1025_driver = { | ||
121 | .owner = THIS_MODULE, | ||
122 | .name = "adm1025", | ||
123 | .id = I2C_DRIVERID_ADM1025, | ||
124 | .flags = I2C_DF_NOTIFY, | ||
125 | .attach_adapter = adm1025_attach_adapter, | ||
126 | .detach_client = adm1025_detach_client, | ||
127 | }; | ||
128 | |||
129 | /* | ||
130 | * Client data (each client gets its own) | ||
131 | */ | ||
132 | |||
133 | struct adm1025_data { | ||
134 | struct i2c_client client; | ||
135 | struct semaphore update_lock; | ||
136 | char valid; /* zero until following fields are valid */ | ||
137 | unsigned long last_updated; /* in jiffies */ | ||
138 | |||
139 | u8 in[6]; /* register value */ | ||
140 | u8 in_max[6]; /* register value */ | ||
141 | u8 in_min[6]; /* register value */ | ||
142 | s8 temp[2]; /* register value */ | ||
143 | s8 temp_min[2]; /* register value */ | ||
144 | s8 temp_max[2]; /* register value */ | ||
145 | u16 alarms; /* register values, combined */ | ||
146 | u8 vid; /* register values, combined */ | ||
147 | u8 vrm; | ||
148 | }; | ||
149 | |||
150 | /* | ||
151 | * Sysfs stuff | ||
152 | */ | ||
153 | |||
154 | #define show_in(offset) \ | ||
155 | static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \ | ||
156 | { \ | ||
157 | struct adm1025_data *data = adm1025_update_device(dev); \ | ||
158 | return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ | ||
159 | in_scale[offset])); \ | ||
160 | } \ | ||
161 | static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ | ||
162 | { \ | ||
163 | struct adm1025_data *data = adm1025_update_device(dev); \ | ||
164 | return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ | ||
165 | in_scale[offset])); \ | ||
166 | } \ | ||
167 | static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ | ||
168 | { \ | ||
169 | struct adm1025_data *data = adm1025_update_device(dev); \ | ||
170 | return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ | ||
171 | in_scale[offset])); \ | ||
172 | } \ | ||
173 | static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); | ||
174 | show_in(0); | ||
175 | show_in(1); | ||
176 | show_in(2); | ||
177 | show_in(3); | ||
178 | show_in(4); | ||
179 | show_in(5); | ||
180 | |||
181 | #define show_temp(offset) \ | ||
182 | static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \ | ||
183 | { \ | ||
184 | struct adm1025_data *data = adm1025_update_device(dev); \ | ||
185 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ | ||
186 | } \ | ||
187 | static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ | ||
188 | { \ | ||
189 | struct adm1025_data *data = adm1025_update_device(dev); \ | ||
190 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \ | ||
191 | } \ | ||
192 | static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ | ||
193 | { \ | ||
194 | struct adm1025_data *data = adm1025_update_device(dev); \ | ||
195 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \ | ||
196 | }\ | ||
197 | static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL); | ||
198 | show_temp(1); | ||
199 | show_temp(2); | ||
200 | |||
201 | #define set_in(offset) \ | ||
202 | static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ | ||
203 | size_t count) \ | ||
204 | { \ | ||
205 | struct i2c_client *client = to_i2c_client(dev); \ | ||
206 | struct adm1025_data *data = i2c_get_clientdata(client); \ | ||
207 | long val = simple_strtol(buf, NULL, 10); \ | ||
208 | \ | ||
209 | down(&data->update_lock); \ | ||
210 | data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \ | ||
211 | i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \ | ||
212 | data->in_min[offset]); \ | ||
213 | up(&data->update_lock); \ | ||
214 | return count; \ | ||
215 | } \ | ||
216 | static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ | ||
217 | size_t count) \ | ||
218 | { \ | ||
219 | struct i2c_client *client = to_i2c_client(dev); \ | ||
220 | struct adm1025_data *data = i2c_get_clientdata(client); \ | ||
221 | long val = simple_strtol(buf, NULL, 10); \ | ||
222 | \ | ||
223 | down(&data->update_lock); \ | ||
224 | data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \ | ||
225 | i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \ | ||
226 | data->in_max[offset]); \ | ||
227 | up(&data->update_lock); \ | ||
228 | return count; \ | ||
229 | } \ | ||
230 | static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ | ||
231 | show_in##offset##_min, set_in##offset##_min); \ | ||
232 | static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ | ||
233 | show_in##offset##_max, set_in##offset##_max); | ||
234 | set_in(0); | ||
235 | set_in(1); | ||
236 | set_in(2); | ||
237 | set_in(3); | ||
238 | set_in(4); | ||
239 | set_in(5); | ||
240 | |||
241 | #define set_temp(offset) \ | ||
242 | static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ | ||
243 | size_t count) \ | ||
244 | { \ | ||
245 | struct i2c_client *client = to_i2c_client(dev); \ | ||
246 | struct adm1025_data *data = i2c_get_clientdata(client); \ | ||
247 | long val = simple_strtol(buf, NULL, 10); \ | ||
248 | \ | ||
249 | down(&data->update_lock); \ | ||
250 | data->temp_min[offset-1] = TEMP_TO_REG(val); \ | ||
251 | i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \ | ||
252 | data->temp_min[offset-1]); \ | ||
253 | up(&data->update_lock); \ | ||
254 | return count; \ | ||
255 | } \ | ||
256 | static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ | ||
257 | size_t count) \ | ||
258 | { \ | ||
259 | struct i2c_client *client = to_i2c_client(dev); \ | ||
260 | struct adm1025_data *data = i2c_get_clientdata(client); \ | ||
261 | long val = simple_strtol(buf, NULL, 10); \ | ||
262 | \ | ||
263 | down(&data->update_lock); \ | ||
264 | data->temp_max[offset-1] = TEMP_TO_REG(val); \ | ||
265 | i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \ | ||
266 | data->temp_max[offset-1]); \ | ||
267 | up(&data->update_lock); \ | ||
268 | return count; \ | ||
269 | } \ | ||
270 | static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ | ||
271 | show_temp##offset##_min, set_temp##offset##_min); \ | ||
272 | static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ | ||
273 | show_temp##offset##_max, set_temp##offset##_max); | ||
274 | set_temp(1); | ||
275 | set_temp(2); | ||
276 | |||
277 | static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) | ||
278 | { | ||
279 | struct adm1025_data *data = adm1025_update_device(dev); | ||
280 | return sprintf(buf, "%u\n", data->alarms); | ||
281 | } | ||
282 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); | ||
283 | |||
284 | static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) | ||
285 | { | ||
286 | struct adm1025_data *data = adm1025_update_device(dev); | ||
287 | return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); | ||
288 | } | ||
289 | /* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */ | ||
290 | static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL); | ||
291 | static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); | ||
292 | |||
293 | static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) | ||
294 | { | ||
295 | struct adm1025_data *data = adm1025_update_device(dev); | ||
296 | return sprintf(buf, "%u\n", data->vrm); | ||
297 | } | ||
298 | static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | ||
299 | { | ||
300 | struct i2c_client *client = to_i2c_client(dev); | ||
301 | struct adm1025_data *data = i2c_get_clientdata(client); | ||
302 | data->vrm = simple_strtoul(buf, NULL, 10); | ||
303 | return count; | ||
304 | } | ||
305 | static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); | ||
306 | |||
307 | /* | ||
308 | * Real code | ||
309 | */ | ||
310 | |||
311 | static int adm1025_attach_adapter(struct i2c_adapter *adapter) | ||
312 | { | ||
313 | if (!(adapter->class & I2C_CLASS_HWMON)) | ||
314 | return 0; | ||
315 | return i2c_detect(adapter, &addr_data, adm1025_detect); | ||
316 | } | ||
317 | |||
318 | /* | ||
319 | * The following function does more than just detection. If detection | ||
320 | * succeeds, it also registers the new chip. | ||
321 | */ | ||
322 | static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) | ||
323 | { | ||
324 | struct i2c_client *new_client; | ||
325 | struct adm1025_data *data; | ||
326 | int err = 0; | ||
327 | const char *name = ""; | ||
328 | u8 config; | ||
329 | |||
330 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | ||
331 | goto exit; | ||
332 | |||
333 | if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { | ||
334 | err = -ENOMEM; | ||
335 | goto exit; | ||
336 | } | ||
337 | memset(data, 0, sizeof(struct adm1025_data)); | ||
338 | |||
339 | /* The common I2C client data is placed right before the | ||
340 | ADM1025-specific data. */ | ||
341 | new_client = &data->client; | ||
342 | i2c_set_clientdata(new_client, data); | ||
343 | new_client->addr = address; | ||
344 | new_client->adapter = adapter; | ||
345 | new_client->driver = &adm1025_driver; | ||
346 | new_client->flags = 0; | ||
347 | |||
348 | /* | ||
349 | * Now we do the remaining detection. A negative kind means that | ||
350 | * the driver was loaded with no force parameter (default), so we | ||
351 | * must both detect and identify the chip. A zero kind means that | ||
352 | * the driver was loaded with the force parameter, the detection | ||
353 | * step shall be skipped. A positive kind means that the driver | ||
354 | * was loaded with the force parameter and a given kind of chip is | ||
355 | * requested, so both the detection and the identification steps | ||
356 | * are skipped. | ||
357 | */ | ||
358 | config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG); | ||
359 | if (kind < 0) { /* detection */ | ||
360 | if ((config & 0x80) != 0x00 | ||
361 | || (i2c_smbus_read_byte_data(new_client, | ||
362 | ADM1025_REG_STATUS1) & 0xC0) != 0x00 | ||
363 | || (i2c_smbus_read_byte_data(new_client, | ||
364 | ADM1025_REG_STATUS2) & 0xBC) != 0x00) { | ||
365 | dev_dbg(&adapter->dev, | ||
366 | "ADM1025 detection failed at 0x%02x.\n", | ||
367 | address); | ||
368 | goto exit_free; | ||
369 | } | ||
370 | } | ||
371 | |||
372 | if (kind <= 0) { /* identification */ | ||
373 | u8 man_id, chip_id; | ||
374 | |||
375 | man_id = i2c_smbus_read_byte_data(new_client, | ||
376 | ADM1025_REG_MAN_ID); | ||
377 | chip_id = i2c_smbus_read_byte_data(new_client, | ||
378 | ADM1025_REG_CHIP_ID); | ||
379 | |||
380 | if (man_id == 0x41) { /* Analog Devices */ | ||
381 | if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */ | ||
382 | kind = adm1025; | ||
383 | } | ||
384 | } else | ||
385 | if (man_id == 0xA1) { /* Philips */ | ||
386 | if (address != 0x2E | ||
387 | && (chip_id & 0xF0) == 0x20) { /* NE1619 */ | ||
388 | kind = ne1619; | ||
389 | } | ||
390 | } | ||
391 | |||
392 | if (kind <= 0) { /* identification failed */ | ||
393 | dev_info(&adapter->dev, | ||
394 | "Unsupported chip (man_id=0x%02X, " | ||
395 | "chip_id=0x%02X).\n", man_id, chip_id); | ||
396 | goto exit_free; | ||
397 | } | ||
398 | } | ||
399 | |||
400 | if (kind == adm1025) { | ||
401 | name = "adm1025"; | ||
402 | } else if (kind == ne1619) { | ||
403 | name = "ne1619"; | ||
404 | } | ||
405 | |||
406 | /* We can fill in the remaining client fields */ | ||
407 | strlcpy(new_client->name, name, I2C_NAME_SIZE); | ||
408 | data->valid = 0; | ||
409 | init_MUTEX(&data->update_lock); | ||
410 | |||
411 | /* Tell the I2C layer a new client has arrived */ | ||
412 | if ((err = i2c_attach_client(new_client))) | ||
413 | goto exit_free; | ||
414 | |||
415 | /* Initialize the ADM1025 chip */ | ||
416 | adm1025_init_client(new_client); | ||
417 | |||
418 | /* Register sysfs hooks */ | ||
419 | device_create_file(&new_client->dev, &dev_attr_in0_input); | ||
420 | device_create_file(&new_client->dev, &dev_attr_in1_input); | ||
421 | device_create_file(&new_client->dev, &dev_attr_in2_input); | ||
422 | device_create_file(&new_client->dev, &dev_attr_in3_input); | ||
423 | device_create_file(&new_client->dev, &dev_attr_in5_input); | ||
424 | device_create_file(&new_client->dev, &dev_attr_in0_min); | ||
425 | device_create_file(&new_client->dev, &dev_attr_in1_min); | ||
426 | device_create_file(&new_client->dev, &dev_attr_in2_min); | ||
427 | device_create_file(&new_client->dev, &dev_attr_in3_min); | ||
428 | device_create_file(&new_client->dev, &dev_attr_in5_min); | ||
429 | device_create_file(&new_client->dev, &dev_attr_in0_max); | ||
430 | device_create_file(&new_client->dev, &dev_attr_in1_max); | ||
431 | device_create_file(&new_client->dev, &dev_attr_in2_max); | ||
432 | device_create_file(&new_client->dev, &dev_attr_in3_max); | ||
433 | device_create_file(&new_client->dev, &dev_attr_in5_max); | ||
434 | device_create_file(&new_client->dev, &dev_attr_temp1_input); | ||
435 | device_create_file(&new_client->dev, &dev_attr_temp2_input); | ||
436 | device_create_file(&new_client->dev, &dev_attr_temp1_min); | ||
437 | device_create_file(&new_client->dev, &dev_attr_temp2_min); | ||
438 | device_create_file(&new_client->dev, &dev_attr_temp1_max); | ||
439 | device_create_file(&new_client->dev, &dev_attr_temp2_max); | ||
440 | device_create_file(&new_client->dev, &dev_attr_alarms); | ||
441 | /* in1_ref is deprecated, remove after 2005-11-11 */ | ||
442 | device_create_file(&new_client->dev, &dev_attr_in1_ref); | ||
443 | device_create_file(&new_client->dev, &dev_attr_cpu0_vid); | ||
444 | device_create_file(&new_client->dev, &dev_attr_vrm); | ||
445 | |||
446 | /* Pin 11 is either in4 (+12V) or VID4 */ | ||
447 | if (!(config & 0x20)) { | ||
448 | device_create_file(&new_client->dev, &dev_attr_in4_input); | ||
449 | device_create_file(&new_client->dev, &dev_attr_in4_min); | ||
450 | device_create_file(&new_client->dev, &dev_attr_in4_max); | ||
451 | } | ||
452 | |||
453 | return 0; | ||
454 | |||
455 | exit_free: | ||
456 | kfree(data); | ||
457 | exit: | ||
458 | return err; | ||
459 | } | ||
460 | |||
461 | static void adm1025_init_client(struct i2c_client *client) | ||
462 | { | ||
463 | u8 reg; | ||
464 | struct adm1025_data *data = i2c_get_clientdata(client); | ||
465 | int i; | ||
466 | |||
467 | data->vrm = i2c_which_vrm(); | ||
468 | |||
469 | /* | ||
470 | * Set high limits | ||
471 | * Usually we avoid setting limits on driver init, but it happens | ||
472 | * that the ADM1025 comes with stupid default limits (all registers | ||
473 | * set to 0). In case the chip has not gone through any limit | ||
474 | * setting yet, we better set the high limits to the max so that | ||
475 | * no alarm triggers. | ||
476 | */ | ||
477 | for (i=0; i<6; i++) { | ||
478 | reg = i2c_smbus_read_byte_data(client, | ||
479 | ADM1025_REG_IN_MAX(i)); | ||
480 | if (reg == 0) | ||
481 | i2c_smbus_write_byte_data(client, | ||
482 | ADM1025_REG_IN_MAX(i), | ||
483 | 0xFF); | ||
484 | } | ||
485 | for (i=0; i<2; i++) { | ||
486 | reg = i2c_smbus_read_byte_data(client, | ||
487 | ADM1025_REG_TEMP_HIGH(i)); | ||
488 | if (reg == 0) | ||
489 | i2c_smbus_write_byte_data(client, | ||
490 | ADM1025_REG_TEMP_HIGH(i), | ||
491 | 0x7F); | ||
492 | } | ||
493 | |||
494 | /* | ||
495 | * Start the conversions | ||
496 | */ | ||
497 | reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG); | ||
498 | if (!(reg & 0x01)) | ||
499 | i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG, | ||
500 | (reg&0x7E)|0x01); | ||
501 | } | ||
502 | |||
503 | static int adm1025_detach_client(struct i2c_client *client) | ||
504 | { | ||
505 | int err; | ||
506 | |||
507 | if ((err = i2c_detach_client(client))) { | ||
508 | dev_err(&client->dev, "Client deregistration failed, " | ||
509 | "client not detached.\n"); | ||
510 | return err; | ||
511 | } | ||
512 | |||
513 | kfree(i2c_get_clientdata(client)); | ||
514 | return 0; | ||
515 | } | ||
516 | |||
517 | static struct adm1025_data *adm1025_update_device(struct device *dev) | ||
518 | { | ||
519 | struct i2c_client *client = to_i2c_client(dev); | ||
520 | struct adm1025_data *data = i2c_get_clientdata(client); | ||
521 | |||
522 | down(&data->update_lock); | ||
523 | |||
524 | if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { | ||
525 | int i; | ||
526 | |||
527 | dev_dbg(&client->dev, "Updating data.\n"); | ||
528 | for (i=0; i<6; i++) { | ||
529 | data->in[i] = i2c_smbus_read_byte_data(client, | ||
530 | ADM1025_REG_IN(i)); | ||
531 | data->in_min[i] = i2c_smbus_read_byte_data(client, | ||
532 | ADM1025_REG_IN_MIN(i)); | ||
533 | data->in_max[i] = i2c_smbus_read_byte_data(client, | ||
534 | ADM1025_REG_IN_MAX(i)); | ||
535 | } | ||
536 | for (i=0; i<2; i++) { | ||
537 | data->temp[i] = i2c_smbus_read_byte_data(client, | ||
538 | ADM1025_REG_TEMP(i)); | ||
539 | data->temp_min[i] = i2c_smbus_read_byte_data(client, | ||
540 | ADM1025_REG_TEMP_LOW(i)); | ||
541 | data->temp_max[i] = i2c_smbus_read_byte_data(client, | ||
542 | ADM1025_REG_TEMP_HIGH(i)); | ||
543 | } | ||
544 | data->alarms = i2c_smbus_read_byte_data(client, | ||
545 | ADM1025_REG_STATUS1) | ||
546 | | (i2c_smbus_read_byte_data(client, | ||
547 | ADM1025_REG_STATUS2) << 8); | ||
548 | data->vid = (i2c_smbus_read_byte_data(client, | ||
549 | ADM1025_REG_VID) & 0x0f) | ||
550 | | ((i2c_smbus_read_byte_data(client, | ||
551 | ADM1025_REG_VID4) & 0x01) << 4); | ||
552 | |||
553 | data->last_updated = jiffies; | ||
554 | data->valid = 1; | ||
555 | } | ||
556 | |||
557 | up(&data->update_lock); | ||
558 | |||
559 | return data; | ||
560 | } | ||
561 | |||
562 | static int __init sensors_adm1025_init(void) | ||
563 | { | ||
564 | return i2c_add_driver(&adm1025_driver); | ||
565 | } | ||
566 | |||
567 | static void __exit sensors_adm1025_exit(void) | ||
568 | { | ||
569 | i2c_del_driver(&adm1025_driver); | ||
570 | } | ||
571 | |||
572 | MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); | ||
573 | MODULE_DESCRIPTION("ADM1025 driver"); | ||
574 | MODULE_LICENSE("GPL"); | ||
575 | |||
576 | module_init(sensors_adm1025_init); | ||
577 | module_exit(sensors_adm1025_exit); | ||