Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
  i2c: Delete the i2c-isa pseudo bus driver
  hwmon: refuse to load abituguru driver on non-Abit boards
  hwmon: fix Abit Uguru3 driver detection on some motherboards
  hwmon/w83627ehf: Be quiet when no chip is found
  hwmon/w83627ehf: No need to initialize fan_min
  hwmon/w83627ehf: Export the thermal sensor types
  hwmon/w83627ehf: Enable VBAT monitoring
  hwmon/w83627ehf: Add support for the VID inputs
  hwmon/w83627ehf: Fix timing issues
  hwmon/w83627ehf: Add error messages for two error cases
  hwmon/w83627ehf: Convert to a platform driver
  hwmon/w83627ehf: Update the Kconfig entry
  make coretemp_device_remove() static
  hwmon: Add LM93 support
  hwmon: Improve the pwmN_enable documentation
  hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
  hwmon: Add support for newer uGuru's
  hwmon/f71805f: Add temperature-tracking fan control mode
  hwmon/w83627ehf: Preserve speed reading when changing fan min
  hwmon: fix detection of abituguru volt inputs
  ...

Manual fixup of trivial conflict in MAINTAINERS file

1 files changed, 57 insertions, 25 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13eea47dceb3..dbdca6f10e46 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -29,17 +29,34 @@ config HWMON_VID
         default n
 
 config SENSORS_ABITUGURU
-        tristate "Abit uGuru"
+        tristate "Abit uGuru (rev 1 & 2)"
         depends on EXPERIMENTAL
         help
-          If you say yes here you get support for the Abit uGuru chips
-          sensor part. The voltage and frequency control parts of the Abit
-          uGuru are not supported. The Abit uGuru chip can be found on Abit
-          uGuru featuring motherboards (most modern Abit motherboards).
+          If you say yes here you get support for the sensor part of the first
+          and second revision of the Abit uGuru chip. The voltage and frequency
+          control parts of the Abit uGuru are not supported. The Abit uGuru
+          chip can be found on Abit uGuru featuring motherboards (most modern
+          Abit motherboards from before end 2005). For more info and a list
+          of which motherboards have which revision see
+          Documentation/hwmon/abituguru
 
           This driver can also be built as a module.  If so, the module
           will be called abituguru.
 
+config SENSORS_ABITUGURU3
+        tristate "Abit uGuru (rev 3)"
+        depends on HWMON && EXPERIMENTAL
+        help
+          If you say yes here you get support for the sensor part of the
+          third revision of the Abit uGuru chip. Only reading the sensors
+          and their settings is supported. The third revision of the Abit
+          uGuru chip can be found on recent Abit motherboards (since end
+          2005). For more info and a list of which motherboards have which
+          revision see Documentation/hwmon/abituguru3
+
+          This driver can also be built as a module.  If so, the module
+          will be called abituguru3.
+
 config SENSORS_AD7418
         tristate "Analog Devices AD7416, AD7417 and AD7418"
         depends on I2C && EXPERIMENTAL
@@ -250,12 +267,10 @@ config SENSORS_CORETEMP
 
 config SENSORS_IT87
         tristate "ITE IT87xx and compatibles"
-        depends on I2C
-        select I2C_ISA
         select HWMON_VID
         help
           If you say yes here you get support for ITE IT8705F, IT8712F,
-          IT8716F and IT8718F sensor chips, and the SiS960 clone.
+          IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
 
           This driver can also be built as a module.  If so, the module
           will be called it87.
@@ -365,8 +380,8 @@ config SENSORS_LM90
         depends on I2C
         help
           If you say yes here you get support for National Semiconductor LM90,
-          LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
-          MAX6658 sensor chips.
+          LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
+          MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
 
           The Analog Devices ADT7461 sensor chip is also supported, but only
           if found in ADM1032 compatibility mode.
@@ -384,6 +399,17 @@ config SENSORS_LM92
           This driver can also be built as a module.  If so, the module
           will be called lm92.
 
+config SENSORS_LM93
+        tristate "National Semiconductor LM93 and compatibles"
+        depends on HWMON && I2C
+        select HWMON_VID
+        help
+          If you say yes here you get support for National Semiconductor LM93
+          sensor chips.
+
+          This driver can also be built as a module.  If so, the module
+          will be called lm93.
+
 config SENSORS_MAX1619
         tristate "Maxim MAX1619 sensor chip"
         depends on I2C
@@ -405,8 +431,6 @@ config SENSORS_MAX6650
 
 config SENSORS_PC87360
         tristate "National Semiconductor PC87360 family"
-        depends on I2C && EXPERIMENTAL
-        select I2C_ISA
         select HWMON_VID
         help
           If you say yes here you get access to the hardware monitoring
@@ -433,8 +457,7 @@ config SENSORS_PC87427
 
 config SENSORS_SIS5595
         tristate "Silicon Integrated Systems Corp. SiS5595"
-        depends on I2C && PCI && EXPERIMENTAL
-        select I2C_ISA
+        depends on PCI
         help
           If you say yes here you get support for the integrated sensors in
           SiS5595 South Bridges.
@@ -442,6 +465,18 @@ config SENSORS_SIS5595
           This driver can also be built as a module.  If so, the module
           will be called sis5595.
 
+config SENSORS_DME1737
+        tristate "SMSC DME1737 and compatibles"
+        depends on I2C && EXPERIMENTAL
+        select HWMON_VID
+        help
+          If you say yes here you get support for the hardware monitoring
+          and fan control features of the SMSC DME1737 (and compatibles
+          like the Asus A8000) Super-I/O chip.
+
+          This driver can also be built as a module.  If so, the module
+          will be called dme1737.
+
 config SENSORS_SMSC47M1
         tristate "SMSC LPC47M10x and compatibles"
         help
@@ -487,8 +522,7 @@ config SENSORS_SMSC47B397
 
 config SENSORS_VIA686A
         tristate "VIA686A"
-        depends on I2C && PCI
-        select I2C_ISA
+        depends on PCI
         help
           If you say yes here you get support for the integrated sensors in
           Via 686A/B South Bridges.
@@ -509,9 +543,8 @@ config SENSORS_VT1211
 
 config SENSORS_VT8231
         tristate "VIA VT8231"
-        depends on I2C && PCI && EXPERIMENTAL
+        depends on PCI
         select HWMON_VID
-        select I2C_ISA
         help
           If you say yes here then you get support for the integrated sensors
           in the VIA VT8231 device.
@@ -584,17 +617,16 @@ config SENSORS_W83627HF
           will be called w83627hf.
 
 config SENSORS_W83627EHF
-        tristate "Winbond W83627EHF"
-        depends on I2C && EXPERIMENTAL
-        select I2C_ISA
+        tristate "Winbond W83627EHF/DHG"
+        select HWMON_VID
         help
-          If you say yes here you get preliminary support for the hardware
+          If you say yes here you get support for the hardware
           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
-          Only fan and temperature inputs are supported at the moment, while
-          the chip does much more than that.
 
           This driver also supports the W83627EHG, which is the lead-free
-          version of the W83627EHF.
+          version of the W83627EHF, and the W83627DHG, which is a similar
+          chip suited for specific Intel processors that use PECI such as
+          the Core 2 Duo.
 
           This driver can also be built as a module.  If so, the module
           will be called w83627ehf.