drm/i915: Add new chipset register definitions

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

1 files changed, 447 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 375569d01d01..99681cfb7ab9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -450,6 +450,13 @@
 #define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
 #define   PLL_REF_INPUT_MASK            (3 << 13)
 #define   PLL_LOAD_PULSE_PHASE_SHIFT            9
+/* IGDNG */
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT     9
+# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK      (7 << 9)
+# define PLL_REF_SDVO_HDMI_MULTIPLIER(x)        (((x)-1) << 9)
+# define DPLL_FPA1_P1_POST_DIV_SHIFT            0
+# define DPLL_FPA1_P1_POST_DIV_MASK             0xff
+
 /*
  * Parallel to Serial Load Pulse phase selection.
  * Selects the phase for the 10X DPLL clock for the PCIe
@@ -1517,4 +1524,444 @@
 # define VGA_2X_MODE                            (1 << 30)
 # define VGA_PIPE_B_SELECT                      (1 << 29)
 
+/* IGDNG */
+
+#define CPU_VGACNTRL    0x41000
+
+#define DIGITAL_PORT_HOTPLUG_CNTRL      0x44030
+#define  DIGITAL_PORTA_HOTPLUG_ENABLE           (1 << 4)
+#define  DIGITAL_PORTA_SHORT_PULSE_2MS          (0 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_4_5MS        (1 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_6MS          (2 << 2)
+#define  DIGITAL_PORTA_SHORT_PULSE_100MS        (3 << 2)
+#define  DIGITAL_PORTA_NO_DETECT                (0 << 0)
+#define  DIGITAL_PORTA_LONG_PULSE_DETECT_MASK   (1 << 1)
+#define  DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK  (1 << 0)
+
+/* refresh rate hardware control */
+#define RR_HW_CTL       0x45300
+#define  RR_HW_LOW_POWER_FRAMES_MASK    0xff
+#define  RR_HW_HIGH_POWER_FRAMES_MASK   0xff00
+
+#define FDI_PLL_BIOS_0  0x46000
+#define FDI_PLL_BIOS_1  0x46004
+#define FDI_PLL_BIOS_2  0x46008
+#define DISPLAY_PORT_PLL_BIOS_0         0x4600c
+#define DISPLAY_PORT_PLL_BIOS_1         0x46010
+#define DISPLAY_PORT_PLL_BIOS_2         0x46014
+
+#define FDI_PLL_FREQ_CTL        0x46030
+#define  FDI_PLL_FREQ_CHANGE_REQUEST    (1<<24)
+#define  FDI_PLL_FREQ_LOCK_LIMIT_MASK   0xfff00
+#define  FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK  0xff
+
+
+#define PIPEA_DATA_M1           0x60030
+#define  TU_SIZE(x)             (((x)-1) << 25) /* default size 64 */
+#define  TU_SIZE_MASK           0x7e000000
+#define  PIPEA_DATA_M1_OFFSET   0
+#define PIPEA_DATA_N1           0x60034
+#define  PIPEA_DATA_N1_OFFSET   0
+
+#define PIPEA_DATA_M2           0x60038
+#define  PIPEA_DATA_M2_OFFSET   0
+#define PIPEA_DATA_N2           0x6003c
+#define  PIPEA_DATA_N2_OFFSET   0
+
+#define PIPEA_LINK_M1           0x60040
+#define  PIPEA_LINK_M1_OFFSET   0
+#define PIPEA_LINK_N1           0x60044
+#define  PIPEA_LINK_N1_OFFSET   0
+
+#define PIPEA_LINK_M2           0x60048
+#define  PIPEA_LINK_M2_OFFSET   0
+#define PIPEA_LINK_N2           0x6004c
+#define  PIPEA_LINK_N2_OFFSET   0
+
+/* PIPEB timing regs are same start from 0x61000 */
+
+#define PIPEB_DATA_M1           0x61030
+#define  PIPEB_DATA_M1_OFFSET   0
+#define PIPEB_DATA_N1           0x61034
+#define  PIPEB_DATA_N1_OFFSET   0
+
+#define PIPEB_DATA_M2           0x61038
+#define  PIPEB_DATA_M2_OFFSET   0
+#define PIPEB_DATA_N2           0x6103c
+#define  PIPEB_DATA_N2_OFFSET   0
+
+#define PIPEB_LINK_M1           0x61040
+#define  PIPEB_LINK_M1_OFFSET   0
+#define PIPEB_LINK_N1           0x61044
+#define  PIPEB_LINK_N1_OFFSET   0
+
+#define PIPEB_LINK_M2           0x61048
+#define  PIPEB_LINK_M2_OFFSET   0
+#define PIPEB_LINK_N2           0x6104c
+#define  PIPEB_LINK_N2_OFFSET   0
+
+/* CPU panel fitter */
+#define PFA_CTL_1               0x68080
+#define PFB_CTL_1               0x68880
+#define  PF_ENABLE              (1<<31)
+
+/* legacy palette */
+#define LGC_PALETTE_A           0x4a000
+#define LGC_PALETTE_B           0x4a800
+
+/* interrupts */
+#define DE_MASTER_IRQ_CONTROL   (1 << 31)
+#define DE_SPRITEB_FLIP_DONE    (1 << 29)
+#define DE_SPRITEA_FLIP_DONE    (1 << 28)
+#define DE_PLANEB_FLIP_DONE     (1 << 27)
+#define DE_PLANEA_FLIP_DONE     (1 << 26)
+#define DE_PCU_EVENT            (1 << 25)
+#define DE_GTT_FAULT            (1 << 24)
+#define DE_POISON               (1 << 23)
+#define DE_PERFORM_COUNTER      (1 << 22)
+#define DE_PCH_EVENT            (1 << 21)
+#define DE_AUX_CHANNEL_A        (1 << 20)
+#define DE_DP_A_HOTPLUG         (1 << 19)
+#define DE_GSE                  (1 << 18)
+#define DE_PIPEB_VBLANK         (1 << 15)
+#define DE_PIPEB_EVEN_FIELD     (1 << 14)
+#define DE_PIPEB_ODD_FIELD      (1 << 13)
+#define DE_PIPEB_LINE_COMPARE   (1 << 12)
+#define DE_PIPEB_VSYNC          (1 << 11)
+#define DE_PIPEB_FIFO_UNDERRUN  (1 << 8)
+#define DE_PIPEA_VBLANK         (1 << 7)
+#define DE_PIPEA_EVEN_FIELD     (1 << 6)
+#define DE_PIPEA_ODD_FIELD      (1 << 5)
+#define DE_PIPEA_LINE_COMPARE   (1 << 4)
+#define DE_PIPEA_VSYNC          (1 << 3)
+#define DE_PIPEA_FIFO_UNDERRUN  (1 << 0)
+
+#define DEISR   0x44000
+#define DEIMR   0x44004
+#define DEIIR   0x44008
+#define DEIER   0x4400c
+
+/* GT interrupt */
+#define GT_SYNC_STATUS          (1 << 2)
+#define GT_USER_INTERRUPT       (1 << 0)
+
+#define GTISR   0x44010
+#define GTIMR   0x44014
+#define GTIIR   0x44018
+#define GTIER   0x4401c
+
+/* PCH */
+
+/* south display engine interrupt */
+#define SDE_CRT_HOTPLUG         (1 << 11)
+#define SDE_PORTD_HOTPLUG       (1 << 10)
+#define SDE_PORTC_HOTPLUG       (1 << 9)
+#define SDE_PORTB_HOTPLUG       (1 << 8)
+#define SDE_SDVOB_HOTPLUG       (1 << 6)
+
+#define SDEISR  0xc4000
+#define SDEIMR  0xc4004
+#define SDEIIR  0xc4008
+#define SDEIER  0xc400c
+
+/* digital port hotplug */
+#define PCH_PORT_HOTPLUG        0xc4030
+#define PORTD_HOTPLUG_ENABLE            (1 << 20)
+#define PORTD_PULSE_DURATION_2ms        (0)
+#define PORTD_PULSE_DURATION_4_5ms      (1 << 18)
+#define PORTD_PULSE_DURATION_6ms        (2 << 18)
+#define PORTD_PULSE_DURATION_100ms      (3 << 18)
+#define PORTD_HOTPLUG_NO_DETECT         (0)
+#define PORTD_HOTPLUG_SHORT_DETECT      (1 << 16)
+#define PORTD_HOTPLUG_LONG_DETECT       (1 << 17)
+#define PORTC_HOTPLUG_ENABLE            (1 << 12)
+#define PORTC_PULSE_DURATION_2ms        (0)
+#define PORTC_PULSE_DURATION_4_5ms      (1 << 10)
+#define PORTC_PULSE_DURATION_6ms        (2 << 10)
+#define PORTC_PULSE_DURATION_100ms      (3 << 10)
+#define PORTC_HOTPLUG_NO_DETECT         (0)
+#define PORTC_HOTPLUG_SHORT_DETECT      (1 << 8)
+#define PORTC_HOTPLUG_LONG_DETECT       (1 << 9)
+#define PORTB_HOTPLUG_ENABLE            (1 << 4)
+#define PORTB_PULSE_DURATION_2ms        (0)
+#define PORTB_PULSE_DURATION_4_5ms      (1 << 2)
+#define PORTB_PULSE_DURATION_6ms        (2 << 2)
+#define PORTB_PULSE_DURATION_100ms      (3 << 2)
+#define PORTB_HOTPLUG_NO_DETECT         (0)
+#define PORTB_HOTPLUG_SHORT_DETECT      (1 << 0)
+#define PORTB_HOTPLUG_LONG_DETECT       (1 << 1)
+
+#define PCH_GPIOA               0xc5010
+#define PCH_GPIOB               0xc5014
+#define PCH_GPIOC               0xc5018
+#define PCH_GPIOD               0xc501c
+#define PCH_GPIOE               0xc5020
+#define PCH_GPIOF               0xc5024
+
+#define PCH_DPLL_A              0xc6014
+#define PCH_DPLL_B              0xc6018
+
+#define PCH_FPA0                0xc6040
+#define PCH_FPA1                0xc6044
+#define PCH_FPB0                0xc6048
+#define PCH_FPB1                0xc604c
+
+#define PCH_DPLL_TEST           0xc606c
+
+#define PCH_DREF_CONTROL        0xC6200
+#define  DREF_CONTROL_MASK      0x7fc3
+#define  DREF_CPU_SOURCE_OUTPUT_DISABLE         (0<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD      (2<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_NONSPREAD       (3<<13)
+#define  DREF_CPU_SOURCE_OUTPUT_MASK            (3<<13)
+#define  DREF_SSC_SOURCE_DISABLE                (0<<11)
+#define  DREF_SSC_SOURCE_ENABLE                 (2<<11)
+#define  DREF_SSC_SOURCE_MASK                   (2<<11)
+#define  DREF_NONSPREAD_SOURCE_DISABLE          (0<<9)
+#define  DREF_NONSPREAD_CK505_ENABLE            (1<<9)
+#define  DREF_NONSPREAD_SOURCE_ENABLE           (2<<9)
+#define  DREF_NONSPREAD_SOURCE_MASK             (2<<9)
+#define  DREF_SUPERSPREAD_SOURCE_DISABLE        (0<<7)
+#define  DREF_SUPERSPREAD_SOURCE_ENABLE         (2<<7)
+#define  DREF_SSC4_DOWNSPREAD                   (0<<6)
+#define  DREF_SSC4_CENTERSPREAD                 (1<<6)
+#define  DREF_SSC1_DISABLE                      (0<<1)
+#define  DREF_SSC1_ENABLE                       (1<<1)
+#define  DREF_SSC4_DISABLE                      (0)
+#define  DREF_SSC4_ENABLE                       (1)
+
+#define PCH_RAWCLK_FREQ         0xc6204
+#define  FDL_TP1_TIMER_SHIFT    12
+#define  FDL_TP1_TIMER_MASK     (3<<12)
+#define  FDL_TP2_TIMER_SHIFT    10
+#define  FDL_TP2_TIMER_MASK     (3<<10)
+#define  RAWCLK_FREQ_MASK       0x3ff
+
+#define PCH_DPLL_TMR_CFG        0xc6208
+
+#define PCH_SSC4_PARMS          0xc6210
+#define PCH_SSC4_AUX_PARMS      0xc6214
+
+/* transcoder */
+
+#define TRANS_HTOTAL_A          0xe0000
+#define  TRANS_HTOTAL_SHIFT     16
+#define  TRANS_HACTIVE_SHIFT    0
+#define TRANS_HBLANK_A          0xe0004
+#define  TRANS_HBLANK_END_SHIFT 16
+#define  TRANS_HBLANK_START_SHIFT 0
+#define TRANS_HSYNC_A           0xe0008
+#define  TRANS_HSYNC_END_SHIFT  16
+#define  TRANS_HSYNC_START_SHIFT 0
+#define TRANS_VTOTAL_A          0xe000c
+#define  TRANS_VTOTAL_SHIFT     16
+#define  TRANS_VACTIVE_SHIFT    0
+#define TRANS_VBLANK_A          0xe0010
+#define  TRANS_VBLANK_END_SHIFT 16
+#define  TRANS_VBLANK_START_SHIFT 0
+#define TRANS_VSYNC_A           0xe0014
+#define  TRANS_VSYNC_END_SHIFT  16
+#define  TRANS_VSYNC_START_SHIFT 0
+
+#define TRANSA_DATA_M1          0xe0030
+#define TRANSA_DATA_N1          0xe0034
+#define TRANSA_DATA_M2          0xe0038
+#define TRANSA_DATA_N2          0xe003c
+#define TRANSA_DP_LINK_M1       0xe0040
+#define TRANSA_DP_LINK_N1       0xe0044
+#define TRANSA_DP_LINK_M2       0xe0048
+#define TRANSA_DP_LINK_N2       0xe004c
+
+#define TRANS_HTOTAL_B          0xe1000
+#define TRANS_HBLANK_B          0xe1004
+#define TRANS_HSYNC_B           0xe1008
+#define TRANS_VTOTAL_B          0xe100c
+#define TRANS_VBLANK_B          0xe1010
+#define TRANS_VSYNC_B           0xe1014
+
+#define TRANSB_DATA_M1          0xe1030
+#define TRANSB_DATA_N1          0xe1034
+#define TRANSB_DATA_M2          0xe1038
+#define TRANSB_DATA_N2          0xe103c
+#define TRANSB_DP_LINK_M1       0xe1040
+#define TRANSB_DP_LINK_N1       0xe1044
+#define TRANSB_DP_LINK_M2       0xe1048
+#define TRANSB_DP_LINK_N2       0xe104c
+
+#define TRANSACONF              0xf0008
+#define TRANSBCONF              0xf1008
+#define  TRANS_DISABLE          (0<<31)
+#define  TRANS_ENABLE           (1<<31)
+#define  TRANS_STATE_MASK       (1<<30)
+#define  TRANS_STATE_DISABLE    (0<<30)
+#define  TRANS_STATE_ENABLE     (1<<30)
+#define  TRANS_FSYNC_DELAY_HB1  (0<<27)
+#define  TRANS_FSYNC_DELAY_HB2  (1<<27)
+#define  TRANS_FSYNC_DELAY_HB3  (2<<27)
+#define  TRANS_FSYNC_DELAY_HB4  (3<<27)
+#define  TRANS_DP_AUDIO_ONLY    (1<<26)
+#define  TRANS_DP_VIDEO_AUDIO   (0<<26)
+#define  TRANS_PROGRESSIVE      (0<<21)
+#define  TRANS_8BPC             (0<<5)
+#define  TRANS_10BPC            (1<<5)
+#define  TRANS_6BPC             (2<<5)
+#define  TRANS_12BPC            (3<<5)
+
+#define FDI_RXA_CHICKEN         0xc200c
+#define FDI_RXB_CHICKEN         0xc2010
+#define  FDI_RX_PHASE_SYNC_POINTER_ENABLE       (1)
+
+/* CPU: FDI_TX */
+#define FDI_TXA_CTL             0x60100
+#define FDI_TXB_CTL             0x61100
+#define  FDI_TX_DISABLE         (0<<31)
+#define  FDI_TX_ENABLE          (1<<31)
+#define  FDI_LINK_TRAIN_PATTERN_1       (0<<28)
+#define  FDI_LINK_TRAIN_PATTERN_2       (1<<28)
+#define  FDI_LINK_TRAIN_PATTERN_IDLE    (2<<28)
+#define  FDI_LINK_TRAIN_NONE            (3<<28)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_4V    (0<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_6V    (1<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_0_8V    (2<<25)
+#define  FDI_LINK_TRAIN_VOLTAGE_1_2V    (3<<25)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_2X   (2<<22)
+#define  FDI_LINK_TRAIN_PRE_EMPHASIS_3X   (3<<22)
+#define  FDI_DP_PORT_WIDTH_X1           (0<<19)
+#define  FDI_DP_PORT_WIDTH_X2           (1<<19)
+#define  FDI_DP_PORT_WIDTH_X3           (2<<19)
+#define  FDI_DP_PORT_WIDTH_X4           (3<<19)
+#define  FDI_TX_ENHANCE_FRAME_ENABLE    (1<<18)
+/* IGDNG: hardwired to 1 */
+#define  FDI_TX_PLL_ENABLE              (1<<14)
+/* both Tx and Rx */
+#define  FDI_SCRAMBLING_ENABLE          (0<<7)
+#define  FDI_SCRAMBLING_DISABLE         (1<<7)
+
+/* FDI_RX, FDI_X is hard-wired to Transcoder_X */
+#define FDI_RXA_CTL             0xf000c
+#define FDI_RXB_CTL             0xf100c
+#define  FDI_RX_ENABLE          (1<<31)
+#define  FDI_RX_DISABLE         (0<<31)
+/* train, dp width same as FDI_TX */
+#define  FDI_DP_PORT_WIDTH_X8           (7<<19)
+#define  FDI_8BPC                       (0<<16)
+#define  FDI_10BPC                      (1<<16)
+#define  FDI_6BPC                       (2<<16)
+#define  FDI_12BPC                      (3<<16)
+#define  FDI_LINK_REVERSE_OVERWRITE     (1<<15)
+#define  FDI_DMI_LINK_REVERSE_MASK      (1<<14)
+#define  FDI_RX_PLL_ENABLE              (1<<13)
+#define  FDI_FS_ERR_CORRECT_ENABLE      (1<<11)
+#define  FDI_FE_ERR_CORRECT_ENABLE      (1<<10)
+#define  FDI_FS_ERR_REPORT_ENABLE       (1<<9)
+#define  FDI_FE_ERR_REPORT_ENABLE       (1<<8)
+#define  FDI_RX_ENHANCE_FRAME_ENABLE    (1<<6)
+#define  FDI_SEL_RAWCLK                 (0<<4)
+#define  FDI_SEL_PCDCLK                 (1<<4)
+
+#define FDI_RXA_MISC            0xf0010
+#define FDI_RXB_MISC            0xf1010
+#define FDI_RXA_TUSIZE1         0xf0030
+#define FDI_RXA_TUSIZE2         0xf0038
+#define FDI_RXB_TUSIZE1         0xf1030
+#define FDI_RXB_TUSIZE2         0xf1038
+
+/* FDI_RX interrupt register format */
+#define FDI_RX_INTER_LANE_ALIGN         (1<<10)
+#define FDI_RX_SYMBOL_LOCK              (1<<9) /* train 2 */
+#define FDI_RX_BIT_LOCK                 (1<<8) /* train 1 */
+#define FDI_RX_TRAIN_PATTERN_2_FAIL     (1<<7)
+#define FDI_RX_FS_CODE_ERR              (1<<6)
+#define FDI_RX_FE_CODE_ERR              (1<<5)
+#define FDI_RX_SYMBOL_ERR_RATE_ABOVE    (1<<4)
+#define FDI_RX_HDCP_LINK_FAIL           (1<<3)
+#define FDI_RX_PIXEL_FIFO_OVERFLOW      (1<<2)
+#define FDI_RX_CROSS_CLOCK_OVERFLOW     (1<<1)
+#define FDI_RX_SYMBOL_QUEUE_OVERFLOW    (1<<0)
+
+#define FDI_RXA_IIR             0xf0014
+#define FDI_RXA_IMR             0xf0018
+#define FDI_RXB_IIR             0xf1014
+#define FDI_RXB_IMR             0xf1018
+
+#define FDI_PLL_CTL_1           0xfe000
+#define FDI_PLL_CTL_2           0xfe004
+
+/* CRT */
+#define PCH_ADPA                0xe1100
+#define  ADPA_TRANS_SELECT_MASK (1<<30)
+#define  ADPA_TRANS_A_SELECT    0
+#define  ADPA_TRANS_B_SELECT    (1<<30)
+#define  ADPA_CRT_HOTPLUG_MASK  0x03ff0000 /* bit 25-16 */
+#define  ADPA_CRT_HOTPLUG_MONITOR_NONE  (0<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MASK  (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
+#define  ADPA_CRT_HOTPLUG_MONITOR_MONO  (2<<24)
+#define  ADPA_CRT_HOTPLUG_ENABLE        (1<<23)
+#define  ADPA_CRT_HOTPLUG_PERIOD_64     (0<<22)
+#define  ADPA_CRT_HOTPLUG_PERIOD_128    (1<<22)
+#define  ADPA_CRT_HOTPLUG_WARMUP_5MS    (0<<21)
+#define  ADPA_CRT_HOTPLUG_WARMUP_10MS   (1<<21)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_2S     (0<<20)
+#define  ADPA_CRT_HOTPLUG_SAMPLE_4S     (1<<20)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_40    (0<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_50    (1<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_60    (2<<18)
+#define  ADPA_CRT_HOTPLUG_VOLTAGE_70    (3<<18)
+#define  ADPA_CRT_HOTPLUG_VOLREF_325MV  (0<<17)
+#define  ADPA_CRT_HOTPLUG_VOLREF_475MV  (1<<17)
+#define  ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
+
+/* or SDVOB */
+#define HDMIB   0xe1140
+#define  PORT_ENABLE    (1 << 31)
+#define  TRANSCODER_A   (0)
+#define  TRANSCODER_B   (1 << 30)
+#define  COLOR_FORMAT_8bpc      (0)
+#define  COLOR_FORMAT_12bpc     (3 << 26)
+#define  SDVOB_HOTPLUG_ENABLE   (1 << 23)
+#define  SDVO_ENCODING          (0)
+#define  TMDS_ENCODING          (2 << 10)
+#define  NULL_PACKET_VSYNC_ENABLE       (1 << 9)
+#define  SDVOB_BORDER_ENABLE    (1 << 7)
+#define  AUDIO_ENABLE           (1 << 6)
+#define  VSYNC_ACTIVE_HIGH      (1 << 4)
+#define  HSYNC_ACTIVE_HIGH      (1 << 3)
+#define  PORT_DETECTED          (1 << 2)
+
+#define HDMIC   0xe1150
+#define HDMID   0xe1160
+
+#define PCH_LVDS        0xe1180
+#define  LVDS_DETECTED  (1 << 1)
+
+#define BLC_PWM_CPU_CTL2        0x48250
+#define  PWM_ENABLE             (1 << 31)
+#define  PWM_PIPE_A             (0 << 29)
+#define  PWM_PIPE_B             (1 << 29)
+#define BLC_PWM_CPU_CTL         0x48254
+
+#define BLC_PWM_PCH_CTL1        0xc8250
+#define  PWM_PCH_ENABLE         (1 << 31)
+#define  PWM_POLARITY_ACTIVE_LOW        (1 << 29)
+#define  PWM_POLARITY_ACTIVE_HIGH       (0 << 29)
+#define  PWM_POLARITY_ACTIVE_LOW2       (1 << 28)
+#define  PWM_POLARITY_ACTIVE_HIGH2      (0 << 28)
+
+#define BLC_PWM_PCH_CTL2        0xc8254
+
+#define PCH_PP_STATUS           0xc7200
+#define PCH_PP_CONTROL          0xc7204
+#define  EDP_FORCE_VDD          (1 << 3)
+#define  EDP_BLC_ENABLE         (1 << 2)
+#define  PANEL_POWER_RESET      (1 << 1)
+#define  PANEL_POWER_OFF        (0 << 0)
+#define  PANEL_POWER_ON         (1 << 0)
+#define PCH_PP_ON_DELAYS        0xc7208
+#define  EDP_PANEL              (1 << 30)
+#define PCH_PP_OFF_DELAYS       0xc720c
+#define PCH_PP_DIVISOR          0xc7210
+
 #endif /* _I915_REG_H_ */