drm/i915/tv: Use polling rather than interrupt-based hotplug

The documentation recommends that we should use a polling method for TV
detection as this is more power efficient than the interrupt based
mechanism (as the encoder can be completely switched off). A secondary
effect is that leaving the hotplug enabled seems to be causing pipe
underruns as reported by Hugh Dickins on his Crestline.

Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[This is a candidate for stable, but needs minor porting to 2.6.37]

1 files changed, 30 insertions, 13 deletions

diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 93206e4eaa6f..fe4a53a50b83 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1234,7 +1234,8 @@ static const struct drm_display_mode reported_modes[] = {
  * \return false if TV is disconnected.
  */
 static int
-intel_tv_detect_type (struct intel_tv *intel_tv)
+intel_tv_detect_type (struct intel_tv *intel_tv,
+                      struct drm_connector *connector)
 {
         struct drm_encoder *encoder = &intel_tv->base.base;
         struct drm_device *dev = encoder->dev;
@@ -1245,11 +1246,13 @@ intel_tv_detect_type (struct intel_tv *intel_tv)
         int type;
 
         /* Disable TV interrupts around load detect or we'll recurse */
-        spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-        i915_disable_pipestat(dev_priv, 0,
-                              PIPE_HOTPLUG_INTERRUPT_ENABLE |
-                              PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
-        spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+        if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
+                spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+                i915_disable_pipestat(dev_priv, 0,
+                                      PIPE_HOTPLUG_INTERRUPT_ENABLE |
+                                      PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+                spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+        }
 
         save_tv_dac = tv_dac = I915_READ(TV_DAC);
         save_tv_ctl = tv_ctl = I915_READ(TV_CTL);
@@ -1302,11 +1305,13 @@ intel_tv_detect_type (struct intel_tv *intel_tv)
         I915_WRITE(TV_CTL, save_tv_ctl);
 
         /* Restore interrupt config */
-        spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-        i915_enable_pipestat(dev_priv, 0,
-                             PIPE_HOTPLUG_INTERRUPT_ENABLE |
-                             PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
-        spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+        if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
+                spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+                i915_enable_pipestat(dev_priv, 0,
+                                     PIPE_HOTPLUG_INTERRUPT_ENABLE |
+                                     PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+                spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+        }
 
         return type;
 }
@@ -1356,7 +1361,7 @@ intel_tv_detect(struct drm_connector *connector, bool force)
         drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V);
 
         if (intel_tv->base.base.crtc && intel_tv->base.base.crtc->enabled) {
-                type = intel_tv_detect_type(intel_tv);
+                type = intel_tv_detect_type(intel_tv, connector);
         } else if (force) {
                 struct drm_crtc *crtc;
                 int dpms_mode;
@@ -1364,7 +1369,7 @@ intel_tv_detect(struct drm_connector *connector, bool force)
                 crtc = intel_get_load_detect_pipe(&intel_tv->base, connector,
                                                   &mode, &dpms_mode);
                 if (crtc) {
-                        type = intel_tv_detect_type(intel_tv);
+                        type = intel_tv_detect_type(intel_tv, connector);
                         intel_release_load_detect_pipe(&intel_tv->base, connector,
                                                        dpms_mode);
                 } else
@@ -1658,6 +1663,18 @@ intel_tv_init(struct drm_device *dev)
         intel_encoder = &intel_tv->base;
         connector = &intel_connector->base;
 
+        /* The documentation, for the older chipsets at least, recommend
+         * using a polling method rather than hotplug detection for TVs.
+         * This is because in order to perform the hotplug detection, the PLLs
+         * for the TV must be kept alive increasing power drain and starving
+         * bandwidth from other encoders. Notably for instance, it causes
+         * pipe underruns on Crestline when this encoder is supposedly idle.
+         *
+         * More recent chipsets favour HDMI rather than integrated S-Video.
+         */
+        connector->polled =
+                DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+
         drm_connector_init(dev, connector, &intel_tv_connector_funcs,
                            DRM_MODE_CONNECTOR_SVIDEO);