i915: Use more consistent names for regs, and store them in a separate file.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 1405 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
new file mode 100644
index 000000000000..477c64e6ba2d
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -0,0 +1,1405 @@
+/* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _I915_REG_H_
+#define _I915_REG_H_
+
+/* MCH MMIO space */
+/** 915-945 and GM965 MCH register controlling DRAM channel access */
+#define DCC             0x200
+#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL              (0 << 0)
+#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC     (1 << 0)
+#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED    (2 << 0)
+#define DCC_ADDRESSING_MODE_MASK                        (3 << 0)
+#define DCC_CHANNEL_XOR_DISABLE                         (1 << 10)
+
+/** 965 MCH register controlling DRAM channel configuration */
+#define CHDECMISC               0x111
+#define CHDECMISC_FLEXMEMORY            (1 << 1)
+
+/*
+ * The Bridge device's PCI config space has information about the
+ * fb aperture size and the amount of pre-reserved memory.
+ */
+#define INTEL_GMCH_CTRL         0x52
+#define INTEL_GMCH_ENABLED      0x4
+#define INTEL_GMCH_MEM_MASK     0x1
+#define INTEL_GMCH_MEM_64M      0x1
+#define INTEL_GMCH_MEM_128M     0
+
+#define INTEL_855_GMCH_GMS_MASK         (0x7 << 4)
+#define INTEL_855_GMCH_GMS_DISABLED     (0x0 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_1M    (0x1 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_4M    (0x2 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_8M    (0x3 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_16M   (0x4 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_32M   (0x5 << 4)
+
+#define INTEL_915G_GMCH_GMS_STOLEN_48M  (0x6 << 4)
+#define INTEL_915G_GMCH_GMS_STOLEN_64M  (0x7 << 4)
+
+/* PCI config space */
+
+#define HPLLCC  0xc0 /* 855 only */
+#define   GC_CLOCK_CONTROL_MASK         (3 << 0)
+#define   GC_CLOCK_133_200              (0 << 0)
+#define   GC_CLOCK_100_200              (1 << 0)
+#define   GC_CLOCK_100_133              (2 << 0)
+#define   GC_CLOCK_166_250              (3 << 0)
+#define GCFGC   0xf0 /* 915+ only */
+#define   GC_LOW_FREQUENCY_ENABLE       (1 << 7)
+#define   GC_DISPLAY_CLOCK_190_200_MHZ  (0 << 4)
+#define   GC_DISPLAY_CLOCK_333_MHZ      (4 << 4)
+#define   GC_DISPLAY_CLOCK_MASK         (7 << 4)
+#define LBB     0xf4
+
+/* VGA stuff */
+
+#define VGA_ST01_MDA 0x3ba
+#define VGA_ST01_CGA 0x3da
+
+#define VGA_MSR_WRITE 0x3c2
+#define VGA_MSR_READ 0x3cc
+#define   VGA_MSR_MEM_EN (1<<1)
+#define   VGA_MSR_CGA_MODE (1<<0)
+
+#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_DATA 0x3c5
+
+#define VGA_AR_INDEX 0x3c0
+#define   VGA_AR_VID_EN (1<<5)
+#define VGA_AR_DATA_WRITE 0x3c0
+#define VGA_AR_DATA_READ 0x3c1
+
+#define VGA_GR_INDEX 0x3ce
+#define VGA_GR_DATA 0x3cf
+/* GR05 */
+#define   VGA_GR_MEM_READ_MODE_SHIFT 3
+#define     VGA_GR_MEM_READ_MODE_PLANE 1
+/* GR06 */
+#define   VGA_GR_MEM_MODE_MASK 0xc
+#define   VGA_GR_MEM_MODE_SHIFT 2
+#define   VGA_GR_MEM_A0000_AFFFF 0
+#define   VGA_GR_MEM_A0000_BFFFF 1
+#define   VGA_GR_MEM_B0000_B7FFF 2
+#define   VGA_GR_MEM_B0000_BFFFF 3
+
+#define VGA_DACMASK 0x3c6
+#define VGA_DACRX 0x3c7
+#define VGA_DACWX 0x3c8
+#define VGA_DACDATA 0x3c9
+
+#define VGA_CR_INDEX_MDA 0x3b4
+#define VGA_CR_DATA_MDA 0x3b5
+#define VGA_CR_INDEX_CGA 0x3d4
+#define VGA_CR_DATA_CGA 0x3d5
+
+/*
+ * Memory interface instructions used by the kernel
+ */
+#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
+
+#define MI_NOOP                 MI_INSTR(0, 0)
+#define MI_USER_INTERRUPT       MI_INSTR(0x02, 0)
+#define MI_WAIT_FOR_EVENT       MI_INSTR(0x03, 0)
+#define   MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
+#define   MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
+#define   MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
+#define MI_FLUSH                MI_INSTR(0x04, 0)
+#define   MI_READ_FLUSH         (1 << 0)
+#define   MI_EXE_FLUSH          (1 << 1)
+#define   MI_NO_WRITE_FLUSH     (1 << 2)
+#define   MI_SCENE_COUNT        (1 << 3) /* just increment scene count */
+#define   MI_END_SCENE          (1 << 4) /* flush binner and incr scene count */
+#define MI_BATCH_BUFFER_END     MI_INSTR(0x0a, 0)
+#define MI_REPORT_HEAD          MI_INSTR(0x07, 0)
+#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
+#define MI_STORE_DWORD_IMM      MI_INSTR(0x20, 1)
+#define   MI_MEM_VIRTUAL        (1 << 22) /* 965+ only */
+#define MI_STORE_DWORD_INDEX    MI_INSTR(0x21, 1)
+#define   MI_STORE_DWORD_INDEX_SHIFT 2
+#define MI_LOAD_REGISTER_IMM    MI_INSTR(0x22, 1)
+#define MI_BATCH_BUFFER         MI_INSTR(0x30, 1)
+#define   MI_BATCH_NON_SECURE   (1)
+#define   MI_BATCH_NON_SECURE_I965 (1<<8)
+#define MI_BATCH_BUFFER_START   MI_INSTR(0x31, 0)
+
+/*
+ * 3D instructions used by the kernel
+ */
+#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
+
+#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
+#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define   SC_UPDATE_SCISSOR       (0x1<<1)
+#define   SC_ENABLE_MASK          (0x1<<0)
+#define   SC_ENABLE               (0x1<<0)
+#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
+#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
+#define   SCI_YMIN_MASK      (0xffff<<16)
+#define   SCI_XMIN_MASK      (0xffff<<0)
+#define   SCI_YMAX_MASK      (0xffff<<16)
+#define   SCI_XMAX_MASK      (0xffff<<0)
+#define GFX_OP_SCISSOR_ENABLE    ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define GFX_OP_SCISSOR_RECT      ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
+#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
+#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
+#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
+#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
+#define GFX_OP_DESTBUFFER_INFO   ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
+#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
+#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
+#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
+#define XY_SRC_COPY_BLT_CMD             ((2<<29)|(0x53<<22)|6)
+#define XY_MONO_SRC_COPY_IMM_BLT        ((2<<29)|(0x71<<22)|5)
+#define XY_SRC_COPY_BLT_WRITE_ALPHA     (1<<21)
+#define XY_SRC_COPY_BLT_WRITE_RGB       (1<<20)
+#define   BLT_DEPTH_8                   (0<<24)
+#define   BLT_DEPTH_16_565              (1<<24)
+#define   BLT_DEPTH_16_1555             (2<<24)
+#define   BLT_DEPTH_32                  (3<<24)
+#define   BLT_ROP_GXCOPY                (0xcc<<16)
+#define XY_SRC_COPY_BLT_SRC_TILED       (1<<15) /* 965+ only */
+#define XY_SRC_COPY_BLT_DST_TILED       (1<<11) /* 965+ only */
+#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
+#define   ASYNC_FLIP                (1<<22)
+#define   DISPLAY_PLANE_A           (0<<20)
+#define   DISPLAY_PLANE_B           (1<<20)
+
+/*
+ * Instruction and interrupt control regs
+ */
+
+#define PRB0_TAIL       0x02030
+#define PRB0_HEAD       0x02034
+#define PRB0_START      0x02038
+#define PRB0_CTL        0x0203c
+#define   TAIL_ADDR             0x001FFFF8
+#define   HEAD_WRAP_COUNT       0xFFE00000
+#define   HEAD_WRAP_ONE         0x00200000
+#define   HEAD_ADDR             0x001FFFFC
+#define   RING_NR_PAGES         0x001FF000
+#define   RING_REPORT_MASK      0x00000006
+#define   RING_REPORT_64K       0x00000002
+#define   RING_REPORT_128K      0x00000004
+#define   RING_NO_REPORT        0x00000000
+#define   RING_VALID_MASK       0x00000001
+#define   RING_VALID            0x00000001
+#define   RING_INVALID          0x00000000
+#define PRB1_TAIL       0x02040 /* 915+ only */
+#define PRB1_HEAD       0x02044 /* 915+ only */
+#define PRB1_START      0x02048 /* 915+ only */
+#define PRB1_CTL        0x0204c /* 915+ only */
+#define ACTHD_I965      0x02074
+#define HWS_PGA         0x02080
+#define HWS_ADDRESS_MASK        0xfffff000
+#define HWS_START_ADDRESS_SHIFT 4
+#define IPEIR           0x02088
+#define NOPID           0x02094
+#define HWSTAM          0x02098
+#define SCPD0           0x0209c /* 915+ only */
+#define IER             0x020a0
+#define IIR             0x020a4
+#define IMR             0x020a8
+#define ISR             0x020ac
+#define   I915_PIPE_CONTROL_NOTIFY_INTERRUPT            (1<<18)
+#define   I915_DISPLAY_PORT_INTERRUPT                   (1<<17)
+#define   I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT    (1<<15)
+#define   I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT      (1<<14)
+#define   I915_HWB_OOM_INTERRUPT                        (1<<13)
+#define   I915_SYNC_STATUS_INTERRUPT                    (1<<12)
+#define   I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT   (1<<11)
+#define   I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT   (1<<10)
+#define   I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT     (1<<9)
+#define   I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT   (1<<8)
+#define   I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT          (1<<7)
+#define   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT           (1<<6)
+#define   I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT          (1<<5)
+#define   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT           (1<<4)
+#define   I915_DEBUG_INTERRUPT                          (1<<2)
+#define   I915_USER_INTERRUPT                           (1<<1)
+#define   I915_ASLE_INTERRUPT                           (1<<0)
+#define EIR             0x020b0
+#define EMR             0x020b4
+#define ESR             0x020b8
+#define INSTPM          0x020c0
+#define ACTHD           0x020c8
+#define FW_BLC          0x020d8
+#define FW_BLC_SELF     0x020e0 /* 915+ only */
+#define MI_ARB_STATE    0x020e4 /* 915+ only */
+#define CACHE_MODE_0    0x02120 /* 915+ only */
+#define   CM0_MASK_SHIFT          16
+#define   CM0_IZ_OPT_DISABLE      (1<<6)
+#define   CM0_ZR_OPT_DISABLE      (1<<5)
+#define   CM0_DEPTH_EVICT_DISABLE (1<<4)
+#define   CM0_COLOR_EVICT_DISABLE (1<<3)
+#define   CM0_DEPTH_WRITE_DISABLE (1<<1)
+#define   CM0_RC_OP_FLUSH_DISABLE (1<<0)
+#define GFX_FLSH_CNTL   0x02170 /* 915+ only */
+
+/*
+ * Framebuffer compression (915+ only)
+ */
+
+#define FBC_CFB_BASE            0x03200 /* 4k page aligned */
+#define FBC_LL_BASE             0x03204 /* 4k page aligned */
+#define FBC_CONTROL             0x03208
+#define   FBC_CTL_EN            (1<<31)
+#define   FBC_CTL_PERIODIC      (1<<30)
+#define   FBC_CTL_INTERVAL_SHIFT (16)
+#define   FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define   FBC_CTL_STRIDE_SHIFT  (5)
+#define   FBC_CTL_FENCENO       (1<<0)
+#define FBC_COMMAND             0x0320c
+#define   FBC_CMD_COMPRESS      (1<<0)
+#define FBC_STATUS              0x03210
+#define   FBC_STAT_COMPRESSING  (1<<31)
+#define   FBC_STAT_COMPRESSED   (1<<30)
+#define   FBC_STAT_MODIFIED     (1<<29)
+#define   FBC_STAT_CURRENT_LINE (1<<0)
+#define FBC_CONTROL2            0x03214
+#define   FBC_CTL_FENCE_DBL     (0<<4)
+#define   FBC_CTL_IDLE_IMM      (0<<2)
+#define   FBC_CTL_IDLE_FULL     (1<<2)
+#define   FBC_CTL_IDLE_LINE     (2<<2)
+#define   FBC_CTL_IDLE_DEBUG    (3<<2)
+#define   FBC_CTL_CPU_FENCE     (1<<1)
+#define   FBC_CTL_PLANEA        (0<<0)
+#define   FBC_CTL_PLANEB        (1<<0)
+#define FBC_FENCE_OFF           0x0321b
+
+#define FBC_LL_SIZE             (1536)
+
+/*
+ * GPIO regs
+ */
+#define GPIOA                   0x5010
+#define GPIOB                   0x5014
+#define GPIOC                   0x5018
+#define GPIOD                   0x501c
+#define GPIOE                   0x5020
+#define GPIOF                   0x5024
+#define GPIOG                   0x5028
+#define GPIOH                   0x502c
+# define GPIO_CLOCK_DIR_MASK            (1 << 0)
+# define GPIO_CLOCK_DIR_IN              (0 << 1)
+# define GPIO_CLOCK_DIR_OUT             (1 << 1)
+# define GPIO_CLOCK_VAL_MASK            (1 << 2)
+# define GPIO_CLOCK_VAL_OUT             (1 << 3)
+# define GPIO_CLOCK_VAL_IN              (1 << 4)
+# define GPIO_CLOCK_PULLUP_DISABLE      (1 << 5)
+# define GPIO_DATA_DIR_MASK             (1 << 8)
+# define GPIO_DATA_DIR_IN               (0 << 9)
+# define GPIO_DATA_DIR_OUT              (1 << 9)
+# define GPIO_DATA_VAL_MASK             (1 << 10)
+# define GPIO_DATA_VAL_OUT              (1 << 11)
+# define GPIO_DATA_VAL_IN               (1 << 12)
+# define GPIO_DATA_PULLUP_DISABLE       (1 << 13)
+
+/*
+ * Clock control & power management
+ */
+
+#define VGA0    0x6000
+#define VGA1    0x6004
+#define VGA_PD  0x6010
+#define   VGA0_PD_P2_DIV_4      (1 << 7)
+#define   VGA0_PD_P1_DIV_2      (1 << 5)
+#define   VGA0_PD_P1_SHIFT      0
+#define   VGA0_PD_P1_MASK       (0x1f << 0)
+#define   VGA1_PD_P2_DIV_4      (1 << 15)
+#define   VGA1_PD_P1_DIV_2      (1 << 13)
+#define   VGA1_PD_P1_SHIFT      8
+#define   VGA1_PD_P1_MASK       (0x1f << 8)
+#define DPLL_A  0x06014
+#define DPLL_B  0x06018
+#define   DPLL_VCO_ENABLE               (1 << 31)
+#define   DPLL_DVO_HIGH_SPEED           (1 << 30)
+#define   DPLL_SYNCLOCK_ENABLE          (1 << 29)
+#define   DPLL_VGA_MODE_DIS             (1 << 28)
+#define   DPLLB_MODE_DAC_SERIAL         (1 << 26) /* i915 */
+#define   DPLLB_MODE_LVDS               (2 << 26) /* i915 */
+#define   DPLL_MODE_MASK                (3 << 26)
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_14    (0 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_7     (1 << 24) /* i915 */
+#define   DPLL_P2_CLOCK_DIV_MASK        0x03000000 /* i915 */
+#define   DPLL_FPA01_P1_POST_DIV_MASK   0x00ff0000 /* i915 */
+
+#define I915_FIFO_UNDERRUN_STATUS               (1UL<<31)
+#define I915_CRC_ERROR_ENABLE                   (1UL<<29)
+#define I915_CRC_DONE_ENABLE                    (1UL<<28)
+#define I915_GMBUS_EVENT_ENABLE                 (1UL<<27)
+#define I915_VSYNC_INTERRUPT_ENABLE             (1UL<<25)
+#define I915_DISPLAY_LINE_COMPARE_ENABLE        (1UL<<24)
+#define I915_DPST_EVENT_ENABLE                  (1UL<<23)
+#define I915_LEGACY_BLC_EVENT_ENABLE            (1UL<<22)
+#define I915_ODD_FIELD_INTERRUPT_ENABLE         (1UL<<21)
+#define I915_EVEN_FIELD_INTERRUPT_ENABLE        (1UL<<20)
+#define I915_START_VBLANK_INTERRUPT_ENABLE      (1UL<<18)       /* 965 or later */
+#define I915_VBLANK_INTERRUPT_ENABLE            (1UL<<17)
+#define I915_OVERLAY_UPDATED_ENABLE             (1UL<<16)
+#define I915_CRC_ERROR_INTERRUPT_STATUS         (1UL<<13)
+#define I915_CRC_DONE_INTERRUPT_STATUS          (1UL<<12)
+#define I915_GMBUS_INTERRUPT_STATUS             (1UL<<11)
+#define I915_VSYNC_INTERRUPT_STATUS             (1UL<<9)
+#define I915_DISPLAY_LINE_COMPARE_STATUS        (1UL<<8)
+#define I915_DPST_EVENT_STATUS                  (1UL<<7)
+#define I915_LEGACY_BLC_EVENT_STATUS            (1UL<<6)
+#define I915_ODD_FIELD_INTERRUPT_STATUS         (1UL<<5)
+#define I915_EVEN_FIELD_INTERRUPT_STATUS        (1UL<<4)
+#define I915_START_VBLANK_INTERRUPT_STATUS      (1UL<<2)        /* 965 or later */
+#define I915_VBLANK_INTERRUPT_STATUS            (1UL<<1)
+#define I915_OVERLAY_UPDATED_STATUS             (1UL<<0)
+
+#define SRX_INDEX               0x3c4
+#define SRX_DATA                0x3c5
+#define SR01                    1
+#define SR01_SCREEN_OFF         (1<<5)
+
+#define PPCR                    0x61204
+#define PPCR_ON                 (1<<0)
+
+#define DVOB                    0x61140
+#define DVOB_ON                 (1<<31)
+#define DVOC                    0x61160
+#define DVOC_ON                 (1<<31)
+#define LVDS                    0x61180
+#define LVDS_ON                 (1<<31)
+
+#define ADPA                    0x61100
+#define ADPA_DPMS_MASK          (~(3<<10))
+#define ADPA_DPMS_ON            (0<<10)
+#define ADPA_DPMS_SUSPEND       (1<<10)
+#define ADPA_DPMS_STANDBY       (2<<10)
+#define ADPA_DPMS_OFF           (3<<10)
+
+#define RING_TAIL               0x00
+#define TAIL_ADDR               0x001FFFF8
+#define RING_HEAD               0x04
+#define HEAD_WRAP_COUNT         0xFFE00000
+#define HEAD_WRAP_ONE           0x00200000
+#define HEAD_ADDR               0x001FFFFC
+#define RING_START              0x08
+#define START_ADDR              0xFFFFF000
+#define RING_LEN                0x0C
+#define RING_NR_PAGES           0x001FF000
+#define RING_REPORT_MASK        0x00000006
+#define RING_REPORT_64K         0x00000002
+#define RING_REPORT_128K        0x00000004
+#define RING_NO_REPORT          0x00000000
+#define RING_VALID_MASK         0x00000001
+#define RING_VALID              0x00000001
+#define RING_INVALID            0x00000000
+
+/* Scratch pad debug 0 reg:
+ */
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830      0x001f0000
+/*
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
+ */
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
+#define   DPLL_FPA01_P1_POST_DIV_SHIFT  16
+/* i830, required in DVO non-gang */
+#define   PLL_P2_DIVIDE_BY_4            (1 << 23)
+#define   PLL_P1_DIVIDE_BY_TWO          (1 << 21) /* i830 */
+#define   PLL_REF_INPUT_DREFCLK         (0 << 13)
+#define   PLL_REF_INPUT_TVCLKINA        (1 << 13) /* i830 */
+#define   PLL_REF_INPUT_TVCLKINBC       (2 << 13) /* SDVO TVCLKIN */
+#define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+#define   PLL_REF_INPUT_MASK            (3 << 13)
+#define   PLL_LOAD_PULSE_PHASE_SHIFT            9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
+ */
+#define   PLL_LOAD_PULSE_PHASE_MASK             (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+#define   DISPLAY_RATE_SELECT_FPA1              (1 << 8)
+/*
+ * SDVO multiplier for 945G/GM. Not used on 965.
+ */
+#define   SDVO_MULTIPLIER_MASK                  0x000000ff
+#define   SDVO_MULTIPLIER_SHIFT_HIRES           4
+#define   SDVO_MULTIPLIER_SHIFT_VGA             0
+#define DPLL_A_MD 0x0601c /* 965+ only */
+/*
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ *
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ */
+#define   DPLL_MD_UDI_DIVIDER_MASK              0x3f000000
+#define   DPLL_MD_UDI_DIVIDER_SHIFT             24
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+#define   DPLL_MD_VGA_UDI_DIVIDER_MASK          0x003f0000
+#define   DPLL_MD_VGA_UDI_DIVIDER_SHIFT         16
+/*
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
+ */
+#define   DPLL_MD_UDI_MULTIPLIER_MASK           0x00003f00
+#define   DPLL_MD_UDI_MULTIPLIER_SHIFT          8
+/*
+ * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
+ */
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_MASK       0x0000003f
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT      0
+#define DPLL_B_MD 0x06020 /* 965+ only */
+#define FPA0    0x06040
+#define FPA1    0x06044
+#define FPB0    0x06048
+#define FPB1    0x0604c
+#define   FP_N_DIV_MASK         0x003f0000
+#define   FP_N_DIV_SHIFT                16
+#define   FP_M1_DIV_MASK        0x00003f00
+#define   FP_M1_DIV_SHIFT                8
+#define   FP_M2_DIV_MASK        0x0000003f
+#define   FP_M2_DIV_SHIFT                0
+#define DPLL_TEST       0x606c
+#define   DPLLB_TEST_SDVO_DIV_1         (0 << 22)
+#define   DPLLB_TEST_SDVO_DIV_2         (1 << 22)
+#define   DPLLB_TEST_SDVO_DIV_4         (2 << 22)
+#define   DPLLB_TEST_SDVO_DIV_MASK      (3 << 22)
+#define   DPLLB_TEST_N_BYPASS           (1 << 19)
+#define   DPLLB_TEST_M_BYPASS           (1 << 18)
+#define   DPLLB_INPUT_BUFFER_ENABLE     (1 << 16)
+#define   DPLLA_TEST_N_BYPASS           (1 << 3)
+#define   DPLLA_TEST_M_BYPASS           (1 << 2)
+#define   DPLLA_INPUT_BUFFER_ENABLE     (1 << 0)
+#define D_STATE         0x6104
+#define CG_2D_DIS       0x6200
+#define CG_3D_DIS       0x6204
+
+/*
+ * Palette regs
+ */
+
+#define PALETTE_A               0x0a000
+#define PALETTE_B               0x0a800
+
+/*
+ * Overlay regs
+ */
+
+#define OVADD                   0x30000
+#define DOVSTA                  0x30008
+#define OC_BUF                  (0x3<<20)
+#define OGAMC5                  0x30010
+#define OGAMC4                  0x30014
+#define OGAMC3                  0x30018
+#define OGAMC2                  0x3001c
+#define OGAMC1                  0x30020
+#define OGAMC0                  0x30024
+
+/*
+ * Display engine regs
+ */
+
+/* Pipe A timing regs */
+#define HTOTAL_A        0x60000
+#define HBLANK_A        0x60004
+#define HSYNC_A         0x60008
+#define VTOTAL_A        0x6000c
+#define VBLANK_A        0x60010
+#define VSYNC_A         0x60014
+#define PIPEASRC        0x6001c
+#define BCLRPAT_A       0x60020
+
+/* Pipe B timing regs */
+#define HTOTAL_B        0x61000
+#define HBLANK_B        0x61004
+#define HSYNC_B         0x61008
+#define VTOTAL_B        0x6100c
+#define VBLANK_B        0x61010
+#define VSYNC_B         0x61014
+#define PIPEBSRC        0x6101c
+#define BCLRPAT_B       0x61020
+
+/* VGA port control */
+#define ADPA                    0x61100
+#define   ADPA_DAC_ENABLE       (1<<31)
+#define   ADPA_DAC_DISABLE      0
+#define   ADPA_PIPE_SELECT_MASK (1<<30)
+#define   ADPA_PIPE_A_SELECT    0
+#define   ADPA_PIPE_B_SELECT    (1<<30)
+#define   ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define   ADPA_SETS_HVPOLARITY  0
+#define   ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define   ADPA_VSYNC_CNTL_ENABLE 0
+#define   ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define   ADPA_HSYNC_CNTL_ENABLE 0
+#define   ADPA_VSYNC_ACTIVE_HIGH (1<<4)
+#define   ADPA_VSYNC_ACTIVE_LOW 0
+#define   ADPA_HSYNC_ACTIVE_HIGH (1<<3)
+#define   ADPA_HSYNC_ACTIVE_LOW 0
+#define   ADPA_DPMS_MASK        (~(3<<10))
+#define   ADPA_DPMS_ON          (0<<10)
+#define   ADPA_DPMS_SUSPEND     (1<<10)
+#define   ADPA_DPMS_STANDBY     (2<<10)
+#define   ADPA_DPMS_OFF         (3<<10)
+
+/* Hotplug control (945+ only) */
+#define PORT_HOTPLUG_EN         0x61110
+#define   SDVOB_HOTPLUG_INT_EN                  (1 << 26)
+#define   SDVOC_HOTPLUG_INT_EN                  (1 << 25)
+#define   TV_HOTPLUG_INT_EN                     (1 << 18)
+#define   CRT_HOTPLUG_INT_EN                    (1 << 9)
+#define   CRT_HOTPLUG_FORCE_DETECT              (1 << 3)
+
+#define PORT_HOTPLUG_STAT       0x61114
+#define   CRT_HOTPLUG_INT_STATUS                (1 << 11)
+#define   TV_HOTPLUG_INT_STATUS                 (1 << 10)
+#define   CRT_HOTPLUG_MONITOR_MASK              (3 << 8)
+#define   CRT_HOTPLUG_MONITOR_COLOR             (3 << 8)
+#define   CRT_HOTPLUG_MONITOR_MONO              (2 << 8)
+#define   CRT_HOTPLUG_MONITOR_NONE              (0 << 8)
+#define   SDVOC_HOTPLUG_INT_STATUS              (1 << 7)
+#define   SDVOB_HOTPLUG_INT_STATUS              (1 << 6)
+
+/* SDVO port control */
+#define SDVOB                   0x61140
+#define SDVOC                   0x61160
+#define   SDVO_ENABLE           (1 << 31)
+#define   SDVO_PIPE_B_SELECT    (1 << 30)
+#define   SDVO_STALL_SELECT     (1 << 29)
+#define   SDVO_INTERRUPT_ENABLE (1 << 26)
+/**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define   SDVO_PORT_MULTIPLY_MASK       (7 << 23)
+#define   SDVO_PORT_MULTIPLY_SHIFT              23
+#define   SDVO_PHASE_SELECT_MASK        (15 << 19)
+#define   SDVO_PHASE_SELECT_DEFAULT     (6 << 19)
+#define   SDVO_CLOCK_OUTPUT_INVERT      (1 << 18)
+#define   SDVOC_GANG_MODE               (1 << 16)
+#define   SDVO_BORDER_ENABLE            (1 << 7)
+#define   SDVOB_PCIE_CONCURRENCY        (1 << 3)
+#define   SDVO_DETECTED                 (1 << 2)
+/* Bits to be preserved when writing */
+#define   SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26))
+#define   SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26))
+
+/* DVO port control */
+#define DVOA                    0x61120
+#define DVOB                    0x61140
+#define DVOC                    0x61160
+#define   DVO_ENABLE                    (1 << 31)
+#define   DVO_PIPE_B_SELECT             (1 << 30)
+#define   DVO_PIPE_STALL_UNUSED         (0 << 28)
+#define   DVO_PIPE_STALL                (1 << 28)
+#define   DVO_PIPE_STALL_TV             (2 << 28)
+#define   DVO_PIPE_STALL_MASK           (3 << 28)
+#define   DVO_USE_VGA_SYNC              (1 << 15)
+#define   DVO_DATA_ORDER_I740           (0 << 14)
+#define   DVO_DATA_ORDER_FP             (1 << 14)
+#define   DVO_VSYNC_DISABLE             (1 << 11)
+#define   DVO_HSYNC_DISABLE             (1 << 10)
+#define   DVO_VSYNC_TRISTATE            (1 << 9)
+#define   DVO_HSYNC_TRISTATE            (1 << 8)
+#define   DVO_BORDER_ENABLE             (1 << 7)
+#define   DVO_DATA_ORDER_GBRG           (1 << 6)
+#define   DVO_DATA_ORDER_RGGB           (0 << 6)
+#define   DVO_DATA_ORDER_GBRG_ERRATA    (0 << 6)
+#define   DVO_DATA_ORDER_RGGB_ERRATA    (1 << 6)
+#define   DVO_VSYNC_ACTIVE_HIGH         (1 << 4)
+#define   DVO_HSYNC_ACTIVE_HIGH         (1 << 3)
+#define   DVO_BLANK_ACTIVE_HIGH         (1 << 2)
+#define   DVO_OUTPUT_CSTATE_PIXELS      (1 << 1)        /* SDG only */
+#define   DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0)        /* SDG only */
+#define   DVO_PRESERVE_MASK             (0x7<<24)
+#define DVOA_SRCDIM             0x61124
+#define DVOB_SRCDIM             0x61144
+#define DVOC_SRCDIM             0x61164
+#define   DVO_SRCDIM_HORIZONTAL_SHIFT   12
+#define   DVO_SRCDIM_VERTICAL_SHIFT     0
+
+/* LVDS port control */
+#define LVDS                    0x61180
+/*
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+#define   LVDS_PORT_EN                  (1 << 31)
+/* Selects pipe B for LVDS data.  Must be set on pre-965. */
+#define   LVDS_PIPEB_SELECT             (1 << 30)
+/*
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+#define   LVDS_A0A2_CLKA_POWER_MASK     (3 << 8)
+#define   LVDS_A0A2_CLKA_POWER_DOWN     (0 << 8)
+#define   LVDS_A0A2_CLKA_POWER_UP       (3 << 8)
+/*
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+#define   LVDS_A3_POWER_MASK            (3 << 6)
+#define   LVDS_A3_POWER_DOWN            (0 << 6)
+#define   LVDS_A3_POWER_UP              (3 << 6)
+/*
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+#define   LVDS_CLKB_POWER_MASK          (3 << 4)
+#define   LVDS_CLKB_POWER_DOWN          (0 << 4)
+#define   LVDS_CLKB_POWER_UP            (3 << 4)
+/*
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+#define   LVDS_B0B3_POWER_MASK          (3 << 2)
+#define   LVDS_B0B3_POWER_DOWN          (0 << 2)
+#define   LVDS_B0B3_POWER_UP            (3 << 2)
+
+/* Panel power sequencing */
+#define PP_STATUS       0x61200
+#define   PP_ON         (1 << 31)
+/*
+ * Indicates that all dependencies of the panel are on:
+ *
+ * - PLL enabled
+ * - pipe enabled
+ * - LVDS/DVOB/DVOC on
+ */
+#define   PP_READY              (1 << 30)
+#define   PP_SEQUENCE_NONE      (0 << 28)
+#define   PP_SEQUENCE_ON        (1 << 28)
+#define   PP_SEQUENCE_OFF       (2 << 28)
+#define   PP_SEQUENCE_MASK      0x30000000
+#define PP_CONTROL      0x61204
+#define   POWER_TARGET_ON       (1 << 0)
+#define PP_ON_DELAYS    0x61208
+#define PP_OFF_DELAYS   0x6120c
+#define PP_DIVISOR      0x61210
+
+/* Panel fitting */
+#define PFIT_CONTROL    0x61230
+#define   PFIT_ENABLE           (1 << 31)
+#define   PFIT_PIPE_MASK        (3 << 29)
+#define   PFIT_PIPE_SHIFT       29
+#define   VERT_INTERP_DISABLE   (0 << 10)
+#define   VERT_INTERP_BILINEAR  (1 << 10)
+#define   VERT_INTERP_MASK      (3 << 10)
+#define   VERT_AUTO_SCALE       (1 << 9)
+#define   HORIZ_INTERP_DISABLE  (0 << 6)
+#define   HORIZ_INTERP_BILINEAR (1 << 6)
+#define   HORIZ_INTERP_MASK     (3 << 6)
+#define   HORIZ_AUTO_SCALE      (1 << 5)
+#define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
+#define PFIT_PGM_RATIOS 0x61234
+#define   PFIT_VERT_SCALE_MASK                  0xfff00000
+#define   PFIT_HORIZ_SCALE_MASK                 0x0000fff0
+#define PFIT_AUTO_RATIOS 0x61238
+
+/* Backlight control */
+#define BLC_PWM_CTL             0x61254
+#define   BACKLIGHT_MODULATION_FREQ_SHIFT               (17)
+#define BLC_PWM_CTL2            0x61250 /* 965+ only */
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define   BACKLIGHT_MODULATION_FREQ_MASK                (0x7fff << 17)
+#define   BLM_LEGACY_MODE                               (1 << 16)
+/*
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define   BACKLIGHT_DUTY_CYCLE_SHIFT            (0)
+#define   BACKLIGHT_DUTY_CYCLE_MASK             (0xffff)
+
+/* TV port control */
+#define TV_CTL                  0x68000
+/** Enables the TV encoder */
+# define TV_ENC_ENABLE                  (1 << 31)
+/** Sources the TV encoder input from pipe B instead of A. */
+# define TV_ENC_PIPEB_SELECT            (1 << 30)
+/** Outputs composite video (DAC A only) */
+# define TV_ENC_OUTPUT_COMPOSITE        (0 << 28)
+/** Outputs SVideo video (DAC B/C) */
+# define TV_ENC_OUTPUT_SVIDEO           (1 << 28)
+/** Outputs Component video (DAC A/B/C) */
+# define TV_ENC_OUTPUT_COMPONENT        (2 << 28)
+/** Outputs Composite and SVideo (DAC A/B/C) */
+# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28)
+# define TV_TRILEVEL_SYNC               (1 << 21)
+/** Enables slow sync generation (945GM only) */
+# define TV_SLOW_SYNC                   (1 << 20)
+/** Selects 4x oversampling for 480i and 576p */
+# define TV_OVERSAMPLE_4X               (0 << 18)
+/** Selects 2x oversampling for 720p and 1080i */
+# define TV_OVERSAMPLE_2X               (1 << 18)
+/** Selects no oversampling for 1080p */
+# define TV_OVERSAMPLE_NONE             (2 << 18)
+/** Selects 8x oversampling */
+# define TV_OVERSAMPLE_8X               (3 << 18)
+/** Selects progressive mode rather than interlaced */
+# define TV_PROGRESSIVE                 (1 << 17)
+/** Sets the colorburst to PAL mode.  Required for non-M PAL modes. */
+# define TV_PAL_BURST                   (1 << 16)
+/** Field for setting delay of Y compared to C */
+# define TV_YC_SKEW_MASK                (7 << 12)
+/** Enables a fix for 480p/576p standard definition modes on the 915GM only */
+# define TV_ENC_SDP_FIX                 (1 << 11)
+/**
+ * Enables a fix for the 915GM only.
+ *
+ * Not sure what it does.
+ */
+# define TV_ENC_C0_FIX                  (1 << 10)
+/** Bits that must be preserved by software */
+# define TV_CTL_SAVE                    ((3 << 8) | (3 << 6))
+# define TV_FUSE_STATE_MASK             (3 << 4)
+/** Read-only state that reports all features enabled */
+# define TV_FUSE_STATE_ENABLED          (0 << 4)
+/** Read-only state that reports that Macrovision is disabled in hardware*/
+# define TV_FUSE_STATE_NO_MACROVISION   (1 << 4)
+/** Read-only state that reports that TV-out is disabled in hardware. */
+# define TV_FUSE_STATE_DISABLED         (2 << 4)
+/** Normal operation */
+# define TV_TEST_MODE_NORMAL            (0 << 0)
+/** Encoder test pattern 1 - combo pattern */
+# define TV_TEST_MODE_PATTERN_1         (1 << 0)
+/** Encoder test pattern 2 - full screen vertical 75% color bars */
+# define TV_TEST_MODE_PATTERN_2         (2 << 0)
+/** Encoder test pattern 3 - full screen horizontal 75% color bars */
+# define TV_TEST_MODE_PATTERN_3         (3 << 0)
+/** Encoder test pattern 4 - random noise */
+# define TV_TEST_MODE_PATTERN_4         (4 << 0)
+/** Encoder test pattern 5 - linear color ramps */
+# define TV_TEST_MODE_PATTERN_5         (5 << 0)
+/**
+ * This test mode forces the DACs to 50% of full output.
+ *
+ * This is used for load detection in combination with TVDAC_SENSE_MASK
+ */
+# define TV_TEST_MODE_MONITOR_DETECT    (7 << 0)
+# define TV_TEST_MODE_MASK              (7 << 0)
+
+#define TV_DAC                  0x68004
+/**
+ * Reports that DAC state change logic has reported change (RO).
+ *
+ * This gets cleared when TV_DAC_STATE_EN is cleared
+*/
+# define TVDAC_STATE_CHG                (1 << 31)
+# define TVDAC_SENSE_MASK               (7 << 28)
+/** Reports that DAC A voltage is above the detect threshold */
+# define TVDAC_A_SENSE                  (1 << 30)
+/** Reports that DAC B voltage is above the detect threshold */
+# define TVDAC_B_SENSE                  (1 << 29)
+/** Reports that DAC C voltage is above the detect threshold */
+# define TVDAC_C_SENSE                  (1 << 28)
+/**
+ * Enables DAC state detection logic, for load-based TV detection.
+ *
+ * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
+ * to off, for load detection to work.
+ */
+# define TVDAC_STATE_CHG_EN             (1 << 27)
+/** Sets the DAC A sense value to high */
+# define TVDAC_A_SENSE_CTL              (1 << 26)
+/** Sets the DAC B sense value to high */
+# define TVDAC_B_SENSE_CTL              (1 << 25)
+/** Sets the DAC C sense value to high */
+# define TVDAC_C_SENSE_CTL              (1 << 24)
+/** Overrides the ENC_ENABLE and DAC voltage levels */
+# define DAC_CTL_OVERRIDE               (1 << 7)
+/** Sets the slew rate.  Must be preserved in software */
+# define ENC_TVDAC_SLEW_FAST            (1 << 6)
+# define DAC_A_1_3_V                    (0 << 4)
+# define DAC_A_1_1_V                    (1 << 4)
+# define DAC_A_0_7_V                    (2 << 4)
+# define DAC_A_OFF                      (3 << 4)
+# define DAC_B_1_3_V                    (0 << 2)
+# define DAC_B_1_1_V                    (1 << 2)
+# define DAC_B_0_7_V                    (2 << 2)
+# define DAC_B_OFF                      (3 << 2)
+# define DAC_C_1_3_V                    (0 << 0)
+# define DAC_C_1_1_V                    (1 << 0)
+# define DAC_C_0_7_V                    (2 << 0)
+# define DAC_C_OFF                      (3 << 0)
+
+/**
+ * CSC coefficients are stored in a floating point format with 9 bits of
+ * mantissa and 2 or 3 bits of exponent.  The exponent is represented as 2**-n,
+ * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
+ * -1 (0x3) being the only legal negative value.
+ */
+#define TV_CSC_Y                0x68010
+# define TV_RY_MASK                     0x07ff0000
+# define TV_RY_SHIFT                    16
+# define TV_GY_MASK                     0x00000fff
+# define TV_GY_SHIFT                    0
+
+#define TV_CSC_Y2               0x68014
+# define TV_BY_MASK                     0x07ff0000
+# define TV_BY_SHIFT                    16
+/**
+ * Y attenuation for component video.
+ *
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AY_MASK                     0x000003ff
+# define TV_AY_SHIFT                    0
+
+#define TV_CSC_U                0x68018
+# define TV_RU_MASK                     0x07ff0000
+# define TV_RU_SHIFT                    16
+# define TV_GU_MASK                     0x000007ff
+# define TV_GU_SHIFT                    0
+
+#define TV_CSC_U2               0x6801c
+# define TV_BU_MASK                     0x07ff0000
+# define TV_BU_SHIFT                    16
+/**
+ * U attenuation for component video.
+ *
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AU_MASK                     0x000003ff
+# define TV_AU_SHIFT                    0
+
+#define TV_CSC_V                0x68020
+# define TV_RV_MASK                     0x0fff0000
+# define TV_RV_SHIFT                    16
+# define TV_GV_MASK                     0x000007ff
+# define TV_GV_SHIFT                    0
+
+#define TV_CSC_V2               0x68024
+# define TV_BV_MASK                     0x07ff0000
+# define TV_BV_SHIFT                    16
+/**
+ * V attenuation for component video.
+ *
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AV_MASK                     0x000007ff
+# define TV_AV_SHIFT                    0
+
+#define TV_CLR_KNOBS            0x68028
+/** 2s-complement brightness adjustment */
+# define TV_BRIGHTNESS_MASK             0xff000000
+# define TV_BRIGHTNESS_SHIFT            24
+/** Contrast adjustment, as a 2.6 unsigned floating point number */
+# define TV_CONTRAST_MASK               0x00ff0000
+# define TV_CONTRAST_SHIFT              16
+/** Saturation adjustment, as a 2.6 unsigned floating point number */
+# define TV_SATURATION_MASK             0x0000ff00
+# define TV_SATURATION_SHIFT            8
+/** Hue adjustment, as an integer phase angle in degrees */
+# define TV_HUE_MASK                    0x000000ff
+# define TV_HUE_SHIFT                   0
+
+#define TV_CLR_LEVEL            0x6802c
+/** Controls the DAC level for black */
+# define TV_BLACK_LEVEL_MASK            0x01ff0000
+# define TV_BLACK_LEVEL_SHIFT           16
+/** Controls the DAC level for blanking */
+# define TV_BLANK_LEVEL_MASK            0x000001ff
+# define TV_BLANK_LEVEL_SHIFT           0
+
+#define TV_H_CTL_1              0x68030
+/** Number of pixels in the hsync. */
+# define TV_HSYNC_END_MASK              0x1fff0000
+# define TV_HSYNC_END_SHIFT             16
+/** Total number of pixels minus one in the line (display and blanking). */
+# define TV_HTOTAL_MASK                 0x00001fff
+# define TV_HTOTAL_SHIFT                0
+
+#define TV_H_CTL_2              0x68034
+/** Enables the colorburst (needed for non-component color) */
+# define TV_BURST_ENA                   (1 << 31)
+/** Offset of the colorburst from the start of hsync, in pixels minus one. */
+# define TV_HBURST_START_SHIFT          16
+# define TV_HBURST_START_MASK           0x1fff0000
+/** Length of the colorburst */
+# define TV_HBURST_LEN_SHIFT            0
+# define TV_HBURST_LEN_MASK             0x0001fff
+
+#define TV_H_CTL_3              0x68038
+/** End of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_END_SHIFT            16
+# define TV_HBLANK_END_MASK             0x1fff0000
+/** Start of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_START_SHIFT          0
+# define TV_HBLANK_START_MASK           0x0001fff
+
+#define TV_V_CTL_1              0x6803c
+/** XXX */
+# define TV_NBR_END_SHIFT               16
+# define TV_NBR_END_MASK                0x07ff0000
+/** XXX */
+# define TV_VI_END_F1_SHIFT             8
+# define TV_VI_END_F1_MASK              0x00003f00
+/** XXX */
+# define TV_VI_END_F2_SHIFT             0
+# define TV_VI_END_F2_MASK              0x0000003f
+
+#define TV_V_CTL_2              0x68040
+/** Length of vsync, in half lines */
+# define TV_VSYNC_LEN_MASK              0x07ff0000
+# define TV_VSYNC_LEN_SHIFT             16
+/** Offset of the start of vsync in field 1, measured in one less than the
+ * number of half lines.
+ */
+# define TV_VSYNC_START_F1_MASK         0x00007f00
+# define TV_VSYNC_START_F1_SHIFT        8
+/**
+ * Offset of the start of vsync in field 2, measured in one less than the
+ * number of half lines.
+ */
+# define TV_VSYNC_START_F2_MASK         0x0000007f
+# define TV_VSYNC_START_F2_SHIFT        0
+
+#define TV_V_CTL_3              0x68044
+/** Enables generation of the equalization signal */
+# define TV_EQUAL_ENA                   (1 << 31)
+/** Length of vsync, in half lines */
+# define TV_VEQ_LEN_MASK                0x007f0000
+# define TV_VEQ_LEN_SHIFT               16
+/** Offset of the start of equalization in field 1, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F1_MASK           0x0007f00
+# define TV_VEQ_START_F1_SHIFT          8
+/**
+ * Offset of the start of equalization in field 2, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F2_MASK           0x000007f
+# define TV_VEQ_START_F2_SHIFT          0
+
+#define TV_V_CTL_4              0x68048
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F1_MASK        0x003f0000
+# define TV_VBURST_START_F1_SHIFT       16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F1_MASK          0x000000ff
+# define TV_VBURST_END_F1_SHIFT         0
+
+#define TV_V_CTL_5              0x6804c
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F2_MASK        0x003f0000
+# define TV_VBURST_START_F2_SHIFT       16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F2_MASK          0x000000ff
+# define TV_VBURST_END_F2_SHIFT         0
+
+#define TV_V_CTL_6              0x68050
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F3_MASK        0x003f0000
+# define TV_VBURST_START_F3_SHIFT       16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F3_MASK          0x000000ff
+# define TV_VBURST_END_F3_SHIFT         0
+
+#define TV_V_CTL_7              0x68054
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F4_MASK        0x003f0000
+# define TV_VBURST_START_F4_SHIFT       16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F4_MASK          0x000000ff
+# define TV_VBURST_END_F4_SHIFT         0
+
+#define TV_SC_CTL_1             0x68060
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA1_EN                  (1 << 31)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA2_EN                  (1 << 30)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA3_EN                  (1 << 29)
+/** Sets the subcarrier DDA to reset frequency every other field */
+# define TV_SC_RESET_EVERY_2            (0 << 24)
+/** Sets the subcarrier DDA to reset frequency every fourth field */
+# define TV_SC_RESET_EVERY_4            (1 << 24)
+/** Sets the subcarrier DDA to reset frequency every eighth field */
+# define TV_SC_RESET_EVERY_8            (2 << 24)
+/** Sets the subcarrier DDA to never reset the frequency */
+# define TV_SC_RESET_NEVER              (3 << 24)
+/** Sets the peak amplitude of the colorburst.*/
+# define TV_BURST_LEVEL_MASK            0x00ff0000
+# define TV_BURST_LEVEL_SHIFT           16
+/** Sets the increment of the first subcarrier phase generation DDA */
+# define TV_SCDDA1_INC_MASK             0x00000fff
+# define TV_SCDDA1_INC_SHIFT            0
+
+#define TV_SC_CTL_2             0x68064
+/** Sets the rollover for the second subcarrier phase generation DDA */
+# define TV_SCDDA2_SIZE_MASK            0x7fff0000
+# define TV_SCDDA2_SIZE_SHIFT           16
+/** Sets the increent of the second subcarrier phase generation DDA */
+# define TV_SCDDA2_INC_MASK             0x00007fff
+# define TV_SCDDA2_INC_SHIFT            0
+
+#define TV_SC_CTL_3             0x68068
+/** Sets the rollover for the third subcarrier phase generation DDA */
+# define TV_SCDDA3_SIZE_MASK            0x7fff0000
+# define TV_SCDDA3_SIZE_SHIFT           16
+/** Sets the increent of the third subcarrier phase generation DDA */
+# define TV_SCDDA3_INC_MASK             0x00007fff
+# define TV_SCDDA3_INC_SHIFT            0
+
+#define TV_WIN_POS              0x68070
+/** X coordinate of the display from the start of horizontal active */
+# define TV_XPOS_MASK                   0x1fff0000
+# define TV_XPOS_SHIFT                  16
+/** Y coordinate of the display from the start of vertical active (NBR) */
+# define TV_YPOS_MASK                   0x00000fff
+# define TV_YPOS_SHIFT                  0
+
+#define TV_WIN_SIZE             0x68074
+/** Horizontal size of the display window, measured in pixels*/
+# define TV_XSIZE_MASK                  0x1fff0000
+# define TV_XSIZE_SHIFT                 16
+/**
+ * Vertical size of the display window, measured in pixels.
+ *
+ * Must be even for interlaced modes.
+ */
+# define TV_YSIZE_MASK                  0x00000fff
+# define TV_YSIZE_SHIFT                 0
+
+#define TV_FILTER_CTL_1         0x68080
+/**
+ * Enables automatic scaling calculation.
+ *
+ * If set, the rest of the registers are ignored, and the calculated values can
+ * be read back from the register.
+ */
+# define TV_AUTO_SCALE                  (1 << 31)
+/**
+ * Disables the vertical filter.
+ *
+ * This is required on modes more than 1024 pixels wide */
+# define TV_V_FILTER_BYPASS             (1 << 29)
+/** Enables adaptive vertical filtering */
+# define TV_VADAPT                      (1 << 28)
+# define TV_VADAPT_MODE_MASK            (3 << 26)
+/** Selects the least adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_LEAST           (0 << 26)
+/** Selects the moderately adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MODERATE        (1 << 26)
+/** Selects the most adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MOST            (3 << 26)
+/**
+ * Sets the horizontal scaling factor.
+ *
+ * This should be the fractional part of the horizontal scaling factor divided
+ * by the oversampling rate.  TV_HSCALE should be less than 1, and set to:
+ *
+ * (src width - 1) / ((oversample * dest width) - 1)
+ */
+# define TV_HSCALE_FRAC_MASK            0x00003fff
+# define TV_HSCALE_FRAC_SHIFT           0
+
+#define TV_FILTER_CTL_2         0x68084
+/**
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
+ */
+# define TV_VSCALE_INT_MASK             0x00038000
+# define TV_VSCALE_INT_SHIFT            15
+/**
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * \sa TV_VSCALE_INT_MASK
+ */
+# define TV_VSCALE_FRAC_MASK            0x00007fff
+# define TV_VSCALE_FRAC_SHIFT           0
+
+#define TV_FILTER_CTL_3         0x68088
+/**
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
+ */
+# define TV_VSCALE_IP_INT_MASK          0x00038000
+# define TV_VSCALE_IP_INT_SHIFT         15
+/**
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
+ *
+ * \sa TV_VSCALE_IP_INT_MASK
+ */
+# define TV_VSCALE_IP_FRAC_MASK         0x00007fff
+# define TV_VSCALE_IP_FRAC_SHIFT                0
+
+#define TV_CC_CONTROL           0x68090
+# define TV_CC_ENABLE                   (1 << 31)
+/**
+ * Specifies which field to send the CC data in.
+ *
+ * CC data is usually sent in field 0.
+ */
+# define TV_CC_FID_MASK                 (1 << 27)
+# define TV_CC_FID_SHIFT                27
+/** Sets the horizontal position of the CC data.  Usually 135. */
+# define TV_CC_HOFF_MASK                0x03ff0000
+# define TV_CC_HOFF_SHIFT               16
+/** Sets the vertical position of the CC data.  Usually 21 */
+# define TV_CC_LINE_MASK                0x0000003f
+# define TV_CC_LINE_SHIFT               0
+
+#define TV_CC_DATA              0x68094
+# define TV_CC_RDY                      (1 << 31)
+/** Second word of CC data to be transmitted. */
+# define TV_CC_DATA_2_MASK              0x007f0000
+# define TV_CC_DATA_2_SHIFT             16
+/** First word of CC data to be transmitted. */
+# define TV_CC_DATA_1_MASK              0x0000007f
+# define TV_CC_DATA_1_SHIFT             0
+
+#define TV_H_LUMA_0             0x68100
+#define TV_H_LUMA_59            0x681ec
+#define TV_H_CHROMA_0           0x68200
+#define TV_H_CHROMA_59          0x682ec
+#define TV_V_LUMA_0             0x68300
+#define TV_V_LUMA_42            0x683a8
+#define TV_V_CHROMA_0           0x68400
+#define TV_V_CHROMA_42          0x684a8
+
+/* Display & cursor control */
+
+/* Pipe A */
+#define PIPEADSL                0x70000
+#define PIPEACONF               0x70008
+#define   PIPEACONF_ENABLE      (1<<31)
+#define   PIPEACONF_DISABLE     0
+#define   PIPEACONF_DOUBLE_WIDE (1<<30)
+#define   I965_PIPECONF_ACTIVE  (1<<30)
+#define   PIPEACONF_SINGLE_WIDE 0
+#define   PIPEACONF_PIPE_UNLOCKED 0
+#define   PIPEACONF_PIPE_LOCKED (1<<25)
+#define   PIPEACONF_PALETTE     0
+#define   PIPEACONF_GAMMA               (1<<24)
+#define   PIPECONF_FORCE_BORDER (1<<25)
+#define   PIPECONF_PROGRESSIVE  (0 << 21)
+#define   PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
+#define   PIPECONF_INTERLACE_FIELD_0_ONLY               (7 << 21)
+#define PIPEASTAT               0x70024
+#define   PIPE_FIFO_UNDERRUN_STATUS             (1UL<<31)
+#define   PIPE_CRC_ERROR_ENABLE                 (1UL<<29)
+#define   PIPE_CRC_DONE_ENABLE                  (1UL<<28)
+#define   PIPE_GMBUS_EVENT_ENABLE               (1UL<<27)
+#define   PIPE_HOTPLUG_INTERRUPT_ENABLE         (1UL<<26)
+#define   PIPE_VSYNC_INTERRUPT_ENABLE           (1UL<<25)
+#define   PIPE_DISPLAY_LINE_COMPARE_ENABLE      (1UL<<24)
+#define   PIPE_DPST_EVENT_ENABLE                (1UL<<23)
+#define   PIPE_LEGACY_BLC_EVENT_ENABLE          (1UL<<22)
+#define   PIPE_ODD_FIELD_INTERRUPT_ENABLE       (1UL<<21)
+#define   PIPE_EVEN_FIELD_INTERRUPT_ENABLE      (1UL<<20)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_ENABLE      (1UL<<18) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_ENABLE    (1UL<<18) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_ENABLE          (1UL<<17)
+#define   PIPE_OVERLAY_UPDATED_ENABLE           (1UL<<16)
+#define   PIPE_CRC_ERROR_INTERRUPT_STATUS       (1UL<<13)
+#define   PIPE_CRC_DONE_INTERRUPT_STATUS        (1UL<<12)
+#define   PIPE_GMBUS_INTERRUPT_STATUS           (1UL<<11)
+#define   PIPE_HOTPLUG_INTERRUPT_STATUS         (1UL<<10)
+#define   PIPE_VSYNC_INTERRUPT_STATUS           (1UL<<9)
+#define   PIPE_DISPLAY_LINE_COMPARE_STATUS      (1UL<<8)
+#define   PIPE_DPST_EVENT_STATUS                (1UL<<7)
+#define   PIPE_LEGACY_BLC_EVENT_STATUS          (1UL<<6)
+#define   PIPE_ODD_FIELD_INTERRUPT_STATUS       (1UL<<5)
+#define   PIPE_EVEN_FIELD_INTERRUPT_STATUS      (1UL<<4)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_STATUS      (1UL<<2) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_STATUS    (1UL<<2) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_STATUS          (1UL<<1)
+#define   PIPE_OVERLAY_UPDATED_STATUS           (1UL<<0)
+
+#define DSPARB                  0x70030
+#define   DSPARB_CSTART_MASK    (0x7f << 7)
+#define   DSPARB_CSTART_SHIFT   7
+#define   DSPARB_BSTART_MASK    (0x7f)
+#define   DSPARB_BSTART_SHIFT   0
+/*
+ * The two pipe frame counter registers are not synchronized, so
+ * reading a stable value is somewhat tricky. The following code
+ * should work:
+ *
+ *  do {
+ *    high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT;
+ *    low1 =  ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
+ *             PIPE_FRAME_LOW_SHIFT);
+ *    high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT);
+ *  } while (high1 != high2);
+ *  frame = (high1 << 8) | low1;
+ */
+#define PIPEAFRAMEHIGH          0x70040
+#define   PIPE_FRAME_HIGH_MASK    0x0000ffff
+#define   PIPE_FRAME_HIGH_SHIFT   0
+#define PIPEAFRAMEPIXEL         0x70044
+#define   PIPE_FRAME_LOW_MASK     0xff000000
+#define   PIPE_FRAME_LOW_SHIFT    24
+#define   PIPE_PIXEL_MASK         0x00ffffff
+#define   PIPE_PIXEL_SHIFT        0
+
+/* Cursor A & B regs */
+#define CURACNTR                0x70080
+#define   CURSOR_MODE_DISABLE   0x00
+#define   CURSOR_MODE_64_32B_AX 0x07
+#define   CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define   MCURSOR_GAMMA_ENABLE  (1 << 26)
+#define CURABASE                0x70084
+#define CURAPOS                 0x70088
+#define   CURSOR_POS_MASK       0x007FF
+#define   CURSOR_POS_SIGN       0x8000
+#define   CURSOR_X_SHIFT        0
+#define   CURSOR_Y_SHIFT        16
+#define CURBCNTR                0x700c0
+#define CURBBASE                0x700c4
+#define CURBPOS                 0x700c8
+
+/* Display A control */
+#define DSPACNTR                0x70180
+#define   DISPLAY_PLANE_ENABLE                  (1<<31)
+#define   DISPLAY_PLANE_DISABLE                 0
+#define   DISPPLANE_GAMMA_ENABLE                (1<<30)
+#define   DISPPLANE_GAMMA_DISABLE               0
+#define   DISPPLANE_PIXFORMAT_MASK              (0xf<<26)
+#define   DISPPLANE_8BPP                        (0x2<<26)
+#define   DISPPLANE_15_16BPP                    (0x4<<26)
+#define   DISPPLANE_16BPP                       (0x5<<26)
+#define   DISPPLANE_32BPP_NO_ALPHA              (0x6<<26)
+#define   DISPPLANE_32BPP                       (0x7<<26)
+#define   DISPPLANE_STEREO_ENABLE               (1<<25)
+#define   DISPPLANE_STEREO_DISABLE              0
+#define   DISPPLANE_SEL_PIPE_MASK               (1<<24)
+#define   DISPPLANE_SEL_PIPE_A                  0
+#define   DISPPLANE_SEL_PIPE_B                  (1<<24)
+#define   DISPPLANE_SRC_KEY_ENABLE              (1<<22)
+#define   DISPPLANE_SRC_KEY_DISABLE             0
+#define   DISPPLANE_LINE_DOUBLE                 (1<<20)
+#define   DISPPLANE_NO_LINE_DOUBLE              0
+#define   DISPPLANE_STEREO_POLARITY_FIRST       0
+#define   DISPPLANE_STEREO_POLARITY_SECOND      (1<<18)
+#define DSPAADDR                0x70184
+#define DSPASTRIDE              0x70188
+#define DSPAPOS                 0x7018C /* reserved */
+#define DSPASIZE                0x70190
+#define DSPASURF                0x7019C /* 965+ only */
+#define DSPATILEOFF             0x701A4 /* 965+ only */
+
+/* VBIOS flags */
+#define SWF00                   0x71410
+#define SWF01                   0x71414
+#define SWF02                   0x71418
+#define SWF03                   0x7141c
+#define SWF04                   0x71420
+#define SWF05                   0x71424
+#define SWF06                   0x71428
+#define SWF10                   0x70410
+#define SWF11                   0x70414
+#define SWF14                   0x71420
+#define SWF30                   0x72414
+#define SWF31                   0x72418
+#define SWF32                   0x7241c
+
+/* Pipe B */
+#define PIPEBDSL                0x71000
+#define PIPEBCONF               0x71008
+#define PIPEBSTAT               0x71024
+#define PIPEBFRAMEHIGH          0x71040
+#define PIPEBFRAMEPIXEL         0x71044
+
+/* Display B control */
+#define DSPBCNTR                0x71180
+#define   DISPPLANE_ALPHA_TRANS_ENABLE          (1<<15)
+#define   DISPPLANE_ALPHA_TRANS_DISABLE         0
+#define   DISPPLANE_SPRITE_ABOVE_DISPLAY        0
+#define   DISPPLANE_SPRITE_ABOVE_OVERLAY        (1)
+#define DSPBADDR                0x71184
+#define DSPBSTRIDE              0x71188
+#define DSPBPOS                 0x7118C
+#define DSPBSIZE                0x71190
+#define DSPBSURF                0x7119C
+#define DSPBTILEOFF             0x711A4
+
+/* VBIOS regs */
+#define VGACNTRL                0x71400
+# define VGA_DISP_DISABLE                       (1 << 31)
+# define VGA_2X_MODE                            (1 << 30)
+# define VGA_PIPE_B_SELECT                      (1 << 29)
+
+#endif /* _I915_REG_H_ */