diff options
author | Denis Turischev <denis@compulab.co.il> | 2010-03-02 04:48:55 -0500 |
---|---|---|
committer | Samuel Ortiz <sameo@linux.intel.com> | 2010-03-07 16:17:37 -0500 |
commit | be9b06b2d80fe661491138c6993f944babb26260 (patch) | |
tree | ea037fa781ccfbec3a43715ea6362bba38fa44a1 /drivers/gpio | |
parent | fd46a0064af171c90664e5b7165c0c9f94478a87 (diff) |
gpio: add Intel SCH GPIO controller driver
Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/Kconfig | 16 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/sch_gpio.c | 282 |
3 files changed, 299 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f42cb317a779..60cb3632c8fd 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig | |||
@@ -94,6 +94,22 @@ config GPIO_VR41XX | |||
94 | help | 94 | help |
95 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | 95 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint |
96 | 96 | ||
97 | config GPIO_SCH | ||
98 | tristate "Intel SCH GPIO" | ||
99 | depends on GPIOLIB | ||
100 | select LPC_SCH | ||
101 | help | ||
102 | Say yes here to support GPIO interface on Intel Poulsbo SCH. | ||
103 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | ||
104 | powered by the core power rail and are turned off during sleep | ||
105 | modes (S3 and higher). The remaining four GPIOs are powered by | ||
106 | the Intel SCH suspend power supply. These GPIOs remain | ||
107 | active during S3. The suspend powered GPIOs can be used to wake the | ||
108 | system from the Suspend-to-RAM state. | ||
109 | |||
110 | This driver can also be built as a module. If so, the module | ||
111 | will be called sch-gpio. | ||
112 | |||
97 | comment "I2C GPIO expanders:" | 113 | comment "I2C GPIO expanders:" |
98 | 114 | ||
99 | config GPIO_MAX7300 | 115 | config GPIO_MAX7300 |
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 594bb70f65af..10f3f8d958b1 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile | |||
@@ -27,3 +27,4 @@ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o | |||
27 | obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o | 27 | obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o |
28 | obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o | 28 | obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o |
29 | obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o | 29 | obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o |
30 | obj-$(CONFIG_GPIO_SCH) += sch_gpio.o \ No newline at end of file | ||
diff --git a/drivers/gpio/sch_gpio.c b/drivers/gpio/sch_gpio.c new file mode 100644 index 000000000000..761071ae3596 --- /dev/null +++ b/drivers/gpio/sch_gpio.c | |||
@@ -0,0 +1,282 @@ | |||
1 | /* | ||
2 | * sch_gpio.c - GPIO interface for Intel Poulsbo SCH | ||
3 | * | ||
4 | * Copyright (c) 2010 CompuLab Ltd | ||
5 | * Author: Denis Turischev <denis@compulab.co.il> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify | ||
8 | * it under the terms of the GNU General Public License 2 as published | ||
9 | * by the Free Software Foundation. | ||
10 | * | ||
11 | * This program is distributed in the hope that it will be useful, | ||
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
14 | * GNU General Public License for more details. | ||
15 | * | ||
16 | * You should have received a copy of the GNU General Public License | ||
17 | * along with this program; see the file COPYING. If not, write to | ||
18 | * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | ||
19 | */ | ||
20 | |||
21 | #include <linux/init.h> | ||
22 | #include <linux/kernel.h> | ||
23 | #include <linux/module.h> | ||
24 | #include <linux/io.h> | ||
25 | #include <linux/errno.h> | ||
26 | #include <linux/acpi.h> | ||
27 | #include <linux/platform_device.h> | ||
28 | |||
29 | #include <linux/gpio.h> | ||
30 | |||
31 | static DEFINE_SPINLOCK(gpio_lock); | ||
32 | |||
33 | #define CGEN (0x00) | ||
34 | #define CGIO (0x04) | ||
35 | #define CGLV (0x08) | ||
36 | |||
37 | #define RGEN (0x20) | ||
38 | #define RGIO (0x24) | ||
39 | #define RGLV (0x28) | ||
40 | |||
41 | static unsigned short gpio_ba; | ||
42 | |||
43 | static int sch_gpio_core_direction_in(struct gpio_chip *gc, unsigned gpio_num) | ||
44 | { | ||
45 | u8 curr_dirs; | ||
46 | unsigned short offset, bit; | ||
47 | |||
48 | spin_lock(&gpio_lock); | ||
49 | |||
50 | offset = CGIO + gpio_num / 8; | ||
51 | bit = gpio_num % 8; | ||
52 | |||
53 | curr_dirs = inb(gpio_ba + offset); | ||
54 | |||
55 | if (!(curr_dirs & (1 << bit))) | ||
56 | outb(curr_dirs | (1 << bit), gpio_ba + offset); | ||
57 | |||
58 | spin_unlock(&gpio_lock); | ||
59 | return 0; | ||
60 | } | ||
61 | |||
62 | static int sch_gpio_core_get(struct gpio_chip *gc, unsigned gpio_num) | ||
63 | { | ||
64 | int res; | ||
65 | unsigned short offset, bit; | ||
66 | |||
67 | offset = CGLV + gpio_num / 8; | ||
68 | bit = gpio_num % 8; | ||
69 | |||
70 | res = !!(inb(gpio_ba + offset) & (1 << bit)); | ||
71 | return res; | ||
72 | } | ||
73 | |||
74 | static void sch_gpio_core_set(struct gpio_chip *gc, unsigned gpio_num, int val) | ||
75 | { | ||
76 | u8 curr_vals; | ||
77 | unsigned short offset, bit; | ||
78 | |||
79 | spin_lock(&gpio_lock); | ||
80 | |||
81 | offset = CGLV + gpio_num / 8; | ||
82 | bit = gpio_num % 8; | ||
83 | |||
84 | curr_vals = inb(gpio_ba + offset); | ||
85 | |||
86 | if (val) | ||
87 | outb(curr_vals | (1 << bit), gpio_ba + offset); | ||
88 | else | ||
89 | outb((curr_vals & ~(1 << bit)), gpio_ba + offset); | ||
90 | spin_unlock(&gpio_lock); | ||
91 | } | ||
92 | |||
93 | static int sch_gpio_core_direction_out(struct gpio_chip *gc, | ||
94 | unsigned gpio_num, int val) | ||
95 | { | ||
96 | u8 curr_dirs; | ||
97 | unsigned short offset, bit; | ||
98 | |||
99 | sch_gpio_core_set(gc, gpio_num, val); | ||
100 | |||
101 | spin_lock(&gpio_lock); | ||
102 | |||
103 | offset = CGIO + gpio_num / 8; | ||
104 | bit = gpio_num % 8; | ||
105 | |||
106 | curr_dirs = inb(gpio_ba + offset); | ||
107 | if (curr_dirs & (1 << bit)) | ||
108 | outb(curr_dirs & ~(1 << bit), gpio_ba + offset); | ||
109 | |||
110 | spin_unlock(&gpio_lock); | ||
111 | return 0; | ||
112 | } | ||
113 | |||
114 | static struct gpio_chip sch_gpio_core = { | ||
115 | .label = "sch_gpio_core", | ||
116 | .owner = THIS_MODULE, | ||
117 | .direction_input = sch_gpio_core_direction_in, | ||
118 | .get = sch_gpio_core_get, | ||
119 | .direction_output = sch_gpio_core_direction_out, | ||
120 | .set = sch_gpio_core_set, | ||
121 | }; | ||
122 | |||
123 | static int sch_gpio_resume_direction_in(struct gpio_chip *gc, | ||
124 | unsigned gpio_num) | ||
125 | { | ||
126 | u8 curr_dirs; | ||
127 | |||
128 | spin_lock(&gpio_lock); | ||
129 | |||
130 | curr_dirs = inb(gpio_ba + RGIO); | ||
131 | |||
132 | if (!(curr_dirs & (1 << gpio_num))) | ||
133 | outb(curr_dirs | (1 << gpio_num) , gpio_ba + RGIO); | ||
134 | |||
135 | spin_unlock(&gpio_lock); | ||
136 | return 0; | ||
137 | } | ||
138 | |||
139 | static int sch_gpio_resume_get(struct gpio_chip *gc, unsigned gpio_num) | ||
140 | { | ||
141 | return !!(inb(gpio_ba + RGLV) & (1 << gpio_num)); | ||
142 | } | ||
143 | |||
144 | static void sch_gpio_resume_set(struct gpio_chip *gc, | ||
145 | unsigned gpio_num, int val) | ||
146 | { | ||
147 | u8 curr_vals; | ||
148 | |||
149 | spin_lock(&gpio_lock); | ||
150 | |||
151 | curr_vals = inb(gpio_ba + RGLV); | ||
152 | |||
153 | if (val) | ||
154 | outb(curr_vals | (1 << gpio_num), gpio_ba + RGLV); | ||
155 | else | ||
156 | outb((curr_vals & ~(1 << gpio_num)), gpio_ba + RGLV); | ||
157 | |||
158 | spin_unlock(&gpio_lock); | ||
159 | } | ||
160 | |||
161 | static int sch_gpio_resume_direction_out(struct gpio_chip *gc, | ||
162 | unsigned gpio_num, int val) | ||
163 | { | ||
164 | u8 curr_dirs; | ||
165 | |||
166 | sch_gpio_resume_set(gc, gpio_num, val); | ||
167 | |||
168 | spin_lock(&gpio_lock); | ||
169 | |||
170 | curr_dirs = inb(gpio_ba + RGIO); | ||
171 | if (curr_dirs & (1 << gpio_num)) | ||
172 | outb(curr_dirs & ~(1 << gpio_num), gpio_ba + RGIO); | ||
173 | |||
174 | spin_unlock(&gpio_lock); | ||
175 | return 0; | ||
176 | } | ||
177 | |||
178 | static struct gpio_chip sch_gpio_resume = { | ||
179 | .label = "sch_gpio_resume", | ||
180 | .owner = THIS_MODULE, | ||
181 | .direction_input = sch_gpio_resume_direction_in, | ||
182 | .get = sch_gpio_resume_get, | ||
183 | .direction_output = sch_gpio_resume_direction_out, | ||
184 | .set = sch_gpio_resume_set, | ||
185 | }; | ||
186 | |||
187 | static int __devinit sch_gpio_probe(struct platform_device *pdev) | ||
188 | { | ||
189 | struct resource *res; | ||
190 | int err; | ||
191 | |||
192 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); | ||
193 | if (!res) | ||
194 | return -EBUSY; | ||
195 | |||
196 | if (!request_region(res->start, resource_size(res), pdev->name)) | ||
197 | return -EBUSY; | ||
198 | |||
199 | gpio_ba = res->start; | ||
200 | |||
201 | sch_gpio_core.base = 0; | ||
202 | sch_gpio_core.ngpio = 10; | ||
203 | sch_gpio_core.dev = &pdev->dev; | ||
204 | |||
205 | sch_gpio_resume.base = 10; | ||
206 | sch_gpio_resume.ngpio = 4; | ||
207 | sch_gpio_resume.dev = &pdev->dev; | ||
208 | |||
209 | err = gpiochip_add(&sch_gpio_core); | ||
210 | if (err < 0) | ||
211 | goto err_sch_gpio_core; | ||
212 | |||
213 | err = gpiochip_add(&sch_gpio_resume); | ||
214 | if (err < 0) | ||
215 | goto err_sch_gpio_resume; | ||
216 | |||
217 | /* | ||
218 | * GPIO[6:0] enabled by default | ||
219 | * GPIO7 is configured by the CMC as SLPIOVR | ||
220 | * Enable GPIO[9:8] core powered gpios explicitly | ||
221 | */ | ||
222 | outb(0x3, gpio_ba + CGEN + 1); | ||
223 | /* | ||
224 | * SUS_GPIO[2:0] enabled by default | ||
225 | * Enable SUS_GPIO3 resume powered gpio explicitly | ||
226 | */ | ||
227 | outb(0x8, gpio_ba + RGEN); | ||
228 | |||
229 | return 0; | ||
230 | |||
231 | err_sch_gpio_resume: | ||
232 | gpiochip_remove(&sch_gpio_core); | ||
233 | |||
234 | err_sch_gpio_core: | ||
235 | release_region(res->start, resource_size(res)); | ||
236 | gpio_ba = 0; | ||
237 | |||
238 | return err; | ||
239 | } | ||
240 | |||
241 | static int __devexit sch_gpio_remove(struct platform_device *pdev) | ||
242 | { | ||
243 | struct resource *res; | ||
244 | if (gpio_ba) { | ||
245 | gpiochip_remove(&sch_gpio_core); | ||
246 | gpiochip_remove(&sch_gpio_resume); | ||
247 | |||
248 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); | ||
249 | |||
250 | release_region(res->start, resource_size(res)); | ||
251 | gpio_ba = 0; | ||
252 | } | ||
253 | |||
254 | return 0; | ||
255 | } | ||
256 | |||
257 | static struct platform_driver sch_gpio_driver = { | ||
258 | .driver = { | ||
259 | .name = "sch_gpio", | ||
260 | .owner = THIS_MODULE, | ||
261 | }, | ||
262 | .probe = sch_gpio_probe, | ||
263 | .remove = __devexit_p(sch_gpio_remove), | ||
264 | }; | ||
265 | |||
266 | static int __init sch_gpio_init(void) | ||
267 | { | ||
268 | return platform_driver_register(&sch_gpio_driver); | ||
269 | } | ||
270 | |||
271 | static void __exit sch_gpio_exit(void) | ||
272 | { | ||
273 | platform_driver_unregister(&sch_gpio_driver); | ||
274 | } | ||
275 | |||
276 | module_init(sch_gpio_init); | ||
277 | module_exit(sch_gpio_exit); | ||
278 | |||
279 | MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); | ||
280 | MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH"); | ||
281 | MODULE_LICENSE("GPL"); | ||
282 | MODULE_ALIAS("platform:sch_gpio"); | ||