firewire: Clean up comment style.

Drop filenames from file preamble, drop editor annotations and
use standard indent style for block comments.

Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed typo)

11 files changed, 439 insertions, 253 deletions

diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 216965615ee8..b2aa85555a7a 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -1,8 +1,5 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-card.c - card level functions
- *
- * Copyright (C) 2005-2006  Kristian Hoegsberg <krh@bitplanet.net>
+/*
+ * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -69,12 +66,14 @@ generate_config_rom (struct fw_card *card, size_t *config_rom_length)
         static u32 config_rom[256];
         int i, j, length;
 
-        /* Initialize contents of config rom buffer.  On the OHCI
+        /*
+         * Initialize contents of config rom buffer.  On the OHCI
          * controller, block reads to the config rom accesses the host
          * memory, but quadlet read access the hardware bus info block
          * registers.  That's just crack, but it means we should make
          * sure the contents of bus info block in host memory mathces
-         * the version stored in the OHCI registers. */
+         * the version stored in the OHCI registers.
+         */
 
         memset(config_rom, 0, sizeof config_rom);
         config_rom[0] = bib_crc_length(4) | bib_info_length(4) | bib_crc(0);
@@ -143,9 +142,11 @@ fw_core_add_descriptor (struct fw_descriptor *desc)
 {
         size_t i;
 
-        /* Check descriptor is valid; the length of all blocks in the
+        /*
+         * Check descriptor is valid; the length of all blocks in the
          * descriptor has to add up to exactly the length of the
-         * block. */
+         * block.
+         */
         i = 0;
         while (i < desc->length)
                 i += (desc->data[i] >> 16) + 1;
@@ -228,7 +229,8 @@ fw_card_bm_work(struct work_struct *work)
 
         if (card->bm_generation + 1 == generation ||
             (card->bm_generation != generation && grace)) {
-                /* This first step is to figure out who is IRM and
+                /*
+                 * This first step is to figure out who is IRM and
                  * then try to become bus manager.  If the IRM is not
                  * well defined (e.g. does not have an active link
                  * layer or does not responds to our lock request, we
@@ -236,7 +238,8 @@ fw_card_bm_work(struct work_struct *work)
                  * In that case, we do a goto into the gap count logic
                  * so that when we do the reset, we still optimize the
                  * gap count.  That could well save a reset in the
-                 * next generation. */
+                 * next generation.
+                 */
 
                 irm_id = card->irm_node->node_id;
                 if (!card->irm_node->link_on) {
@@ -260,8 +263,10 @@ fw_card_bm_work(struct work_struct *work)
                 wait_for_completion(&bmd.done);
 
                 if (bmd.rcode == RCODE_GENERATION) {
-                        /* Another bus reset happened. Just return,
-                         * the BM work has been rescheduled. */
+                        /*
+                         * Another bus reset happened. Just return,
+                         * the BM work has been rescheduled.
+                         */
                         return;
                 }
 
@@ -271,48 +276,62 @@ fw_card_bm_work(struct work_struct *work)
 
                 spin_lock_irqsave(&card->lock, flags);
                 if (bmd.rcode != RCODE_COMPLETE) {
-                        /* The lock request failed, maybe the IRM
+                        /*
+                         * The lock request failed, maybe the IRM
                          * isn't really IRM capable after all. Let's
                          * do a bus reset and pick the local node as
-                         * root, and thus, IRM. */
+                         * root, and thus, IRM.
+                         */
                         new_root_id = card->local_node->node_id;
                         fw_notify("BM lock failed, making local node (%02x) root.\n",
                                   new_root_id);
                         goto pick_me;
                 }
         } else if (card->bm_generation != generation) {
-                /* OK, we weren't BM in the last generation, and it's
+                /*
+                 * OK, we weren't BM in the last generation, and it's
                  * less than 100ms since last bus reset. Reschedule
-                 * this task 100ms from now. */
+                 * this task 100ms from now.
+                 */
                 spin_unlock_irqrestore(&card->lock, flags);
                 schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10));
                 return;
         }
 
-        /* We're bus manager for this generation, so next step is to
+        /*
+         * We're bus manager for this generation, so next step is to
          * make sure we have an active cycle master and do gap count
-         * optimization. */
+         * optimization.
+         */
         card->bm_generation = generation;
 
         if (root == NULL) {
-                /* Either link_on is false, or we failed to read the
-                 * config rom.  In either case, pick another root. */
+                /*
+                 * Either link_on is false, or we failed to read the
+                 * config rom.  In either case, pick another root.
+                 */
                 new_root_id = card->local_node->node_id;
         } else if (atomic_read(&root->state) != FW_DEVICE_RUNNING) {
-                /* If we haven't probed this device yet, bail out now
-                 * and let's try again once that's done. */
+                /*
+                 * If we haven't probed this device yet, bail out now
+                 * and let's try again once that's done.
+                 */
                 spin_unlock_irqrestore(&card->lock, flags);
                 return;
         } else if (root->config_rom[2] & bib_cmc) {
-                /* FIXME: I suppose we should set the cmstr bit in the
+                /*
+                 * FIXME: I suppose we should set the cmstr bit in the
                  * STATE_CLEAR register of this node, as described in
                  * 1394-1995, 8.4.2.6.  Also, send out a force root
-                 * packet for this node. */
+                 * packet for this node.
+                 */
                 new_root_id = root_id;
         } else {
-                /* Current root has an active link layer and we
+                /*
+                 * Current root has an active link layer and we
                  * successfully read the config rom, but it's not
-                 * cycle master capable. */
+                 * cycle master capable.
+                 */
                 new_root_id = card->local_node->node_id;
         }
 
@@ -324,9 +343,11 @@ fw_card_bm_work(struct work_struct *work)
         else
                 gap_count = 63;
 
-        /* Finally, figure out if we should do a reset or not.  If we've
+        /*
+         * Finally, figure out if we should do a reset or not.  If we've
          * done less that 5 resets with the same physical topology and we
-         * have either a new root or a new gap count setting, let's do it. */
+         * have either a new root or a new gap count setting, let's do it.
+         */
 
         if (card->bm_retries++ < 5 &&
             (card->gap_count != gap_count || new_root_id != root_id))
@@ -391,8 +412,10 @@ fw_card_add(struct fw_card *card,
                                          PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
                 return -EIO;
 
-        /* The subsystem grabs a reference when the card is added and
-         * drops it when the driver calls fw_core_remove_card. */
+        /*
+         * The subsystem grabs a reference when the card is added and
+         * drops it when the driver calls fw_core_remove_card.
+         */
         fw_card_get(card);
 
         down_write(&card_rwsem);
@@ -405,11 +428,13 @@ fw_card_add(struct fw_card *card,
 EXPORT_SYMBOL(fw_card_add);
 
 
-/* The next few functions implements a dummy driver that use once a
+/*
+ * The next few functions implements a dummy driver that use once a
  * card driver shuts down an fw_card.  This allows the driver to
  * cleanly unload, as all IO to the card will be handled by the dummy
  * driver instead of calling into the (possibly) unloaded module.  The
- * dummy driver just fails all IO. */
+ * dummy driver just fails all IO.
+ */
 
 static int
 dummy_enable(struct fw_card *card, u32 *config_rom, size_t length)
@@ -429,8 +454,10 @@ static int
 dummy_set_config_rom(struct fw_card *card,
                      u32 *config_rom, size_t length)
 {
-        /* We take the card out of card_list before setting the dummy
-         * driver, so this should never get called. */
+        /*
+         * We take the card out of card_list before setting the dummy
+         * driver, so this should never get called.
+         */
         BUG();
         return -1;
 }
@@ -510,9 +537,11 @@ release_card(struct kref *kref)
         kfree(card);
 }
 
-/* An assumption for fw_card_put() is that the card driver allocates
+/*
+ * An assumption for fw_card_put() is that the card driver allocates
  * the fw_card struct with kalloc and that it has been shut down
- * before the last ref is dropped. */
+ * before the last ref is dropped.
+ */
 void
 fw_card_put(struct fw_card *card)
 {
@@ -524,8 +553,6 @@ int
 fw_core_initiate_bus_reset(struct fw_card *card, int short_reset)
 {
         int reg = short_reset ? 5 : 1;
-        /* The following values happen to be the same bit. However be
-         * explicit for clarity. */
         int bit = short_reset ? PHY_BUS_SHORT_RESET : PHY_BUS_RESET;
 
         return card->driver->update_phy_reg(card, reg, 0, bit);
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index 88b8fd917f54..c876ac3c50e0 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -1,8 +1,7 @@
-/*                                              -*- c-basic-offset: 8 -*-
+/*
+ * Char device for device raw access
  *
- * fw-device-cdev.c - Char device for device raw access
- *
- * Copyright (C) 2005-2006  Kristian Hoegsberg <krh@bitplanet.net>
+ * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -36,9 +35,6 @@
 #include "fw-topology.h"
 #include "fw-device.h"
 
-/* dequeue_event() just kfree()'s the event, so the event has to be
- * the first field in the struct. */
-
 struct client;
 struct client_resource {
         struct list_head link;
@@ -46,6 +42,11 @@ struct client_resource {
         u32 handle;
 };
 
+/*
+ * dequeue_event() just kfree()'s the event, so the event has to be
+ * the first field in the struct.
+ */
+
 struct event {
         struct { void *data; size_t size; } v[2];
         struct list_head link;
@@ -691,13 +692,15 @@ static int ioctl_queue_iso(struct client *client, void *buffer)
         if (ctx == NULL || request->handle != 0)
                 return -EINVAL;
 
-        /* If the user passes a non-NULL data pointer, has mmap()'ed
+        /*
+         * If the user passes a non-NULL data pointer, has mmap()'ed
          * the iso buffer, and the pointer points inside the buffer,
          * we setup the payload pointers accordingly.  Otherwise we
          * set them both to 0, which will still let packets with
          * payload_length == 0 through.  In other words, if no packets
          * use the indirect payload, the iso buffer need not be mapped
-         * and the request->data pointer is ignored.*/
+         * and the request->data pointer is ignored.
+         */
 
         payload = (unsigned long)request->data - client->vm_start;
         buffer_end = client->buffer.page_count << PAGE_SHIFT;
@@ -720,8 +723,10 @@ static int ioctl_queue_iso(struct client *client, void *buffer)
                 if (ctx->type == FW_ISO_CONTEXT_TRANSMIT) {
                         header_length = u.packet.header_length;
                 } else {
-                        /* We require that header_length is a multiple of
-                         * the fixed header size, ctx->header_size */
+                        /*
+                         * We require that header_length is a multiple of
+                         * the fixed header size, ctx->header_size.
+                         */
                         if (ctx->header_size == 0) {
                                 if (u.packet.header_length > 0)
                                         return -EINVAL;
@@ -908,8 +913,10 @@ static int fw_device_op_release(struct inode *inode, struct file *file)
         list_for_each_entry_safe(r, next_r, &client->resource_list, link)
                 r->release(client, r);
 
-        /* FIXME: We should wait for the async tasklets to stop
-         * running before freeing the memory. */
+        /*
+         * FIXME: We should wait for the async tasklets to stop
+         * running before freeing the memory.
+         */
 
         list_for_each_entry_safe(e, next_e, &client->event_list, link)
                 kfree(e);
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index 99d1c418d2b0..8e5f17f5e98a 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -1,6 +1,5 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-device.c - Device probing and sysfs code.
+/*
+ * Device probing and sysfs code.
  *
  * Copyright (C) 2005-2006  Kristian Hoegsberg <krh@bitplanet.net>
  *
@@ -174,8 +173,10 @@ static void fw_device_release(struct device *dev)
         struct fw_device *device = fw_device(dev);
         unsigned long flags;
 
-        /* Take the card lock so we don't set this to NULL while a
-         * FW_NODE_UPDATED callback is being handled. */
+        /*
+         * Take the card lock so we don't set this to NULL while a
+         * FW_NODE_UPDATED callback is being handled.
+         */
         spin_lock_irqsave(&device->card->lock, flags);
         device->node->data = NULL;
         spin_unlock_irqrestore(&device->card->lock, flags);
@@ -421,34 +422,42 @@ static int read_bus_info_block(struct fw_device *device)
         for (i = 0; i < 5; i++) {
                 if (read_rom(device, i, &rom[i]) != RCODE_COMPLETE)
                         return -1;
-                /* As per IEEE1212 7.2, during power-up, devices can
+                /*
+                 * As per IEEE1212 7.2, during power-up, devices can
                  * reply with a 0 for the first quadlet of the config
                  * rom to indicate that they are booting (for example,
                  * if the firmware is on the disk of a external
                  * harddisk).  In that case we just fail, and the
-                 * retry mechanism will try again later. */
+                 * retry mechanism will try again later.
+                 */
                 if (i == 0 && rom[i] == 0)
                         return -1;
         }
 
-        /* Now parse the config rom.  The config rom is a recursive
+        /*
+         * Now parse the config rom.  The config rom is a recursive
          * directory structure so we parse it using a stack of
          * references to the blocks that make up the structure.  We
          * push a reference to the root directory on the stack to
-         * start things off. */
+         * start things off.
+         */
         length = i;
         sp = 0;
         stack[sp++] = 0xc0000005;
         while (sp > 0) {
-                /* Pop the next block reference of the stack.  The
+                /*
+                 * Pop the next block reference of the stack.  The
                  * lower 24 bits is the offset into the config rom,
                  * the upper 8 bits are the type of the reference the
-                 * block. */
+                 * block.
+                 */
                 key = stack[--sp];
                 i = key & 0xffffff;
                 if (i >= ARRAY_SIZE(rom))
-                        /* The reference points outside the standard
-                         * config rom area, something's fishy. */
+                        /*
+                         * The reference points outside the standard
+                         * config rom area, something's fishy.
+                         */
                         return -1;
 
                 /* Read header quadlet for the block to get the length. */
@@ -457,15 +466,19 @@ static int read_bus_info_block(struct fw_device *device)
                 end = i + (rom[i] >> 16) + 1;
                 i++;
                 if (end > ARRAY_SIZE(rom))
-                        /* This block extends outside standard config
+                        /*
+                         * This block extends outside standard config
                          * area (and the array we're reading it
                          * into).  That's broken, so ignore this
-                         * device. */
+                         * device.
+                         */
                         return -1;
 
-                /* Now read in the block.  If this is a directory
+                /*
+                 * Now read in the block.  If this is a directory
                  * block, check the entries as we read them to see if
-                 * it references another block, and push it in that case. */
+                 * it references another block, and push it in that case.
+                 */
                 while (i < end) {
                         if (read_rom(device, i, &rom[i]) != RCODE_COMPLETE)
                                 return -1;
@@ -516,8 +529,10 @@ static void create_units(struct fw_device *device)
                 if (key != (CSR_UNIT | CSR_DIRECTORY))
                         continue;
 
-                /* Get the address of the unit directory and try to
-                 * match the drivers id_tables against it. */
+                /*
+                 * Get the address of the unit directory and try to
+                 * match the drivers id_tables against it.
+                 */
                 unit = kzalloc(sizeof *unit, GFP_KERNEL);
                 if (unit == NULL) {
                         fw_error("failed to allocate memory for unit\n");
@@ -585,14 +600,16 @@ static struct device_type fw_device_type = {
         .release        = fw_device_release,
 };
 
-/* These defines control the retry behavior for reading the config
+/*
+ * These defines control the retry behavior for reading the config
  * rom.  It shouldn't be necessary to tweak these; if the device
  * doesn't respond to a config rom read within 10 seconds, it's not
  * going to respond at all.  As for the initial delay, a lot of
  * devices will be able to respond within half a second after bus
  * reset.  On the other hand, it's not really worth being more
  * aggressive than that, since it scales pretty well; if 10 devices
- * are plugged in, they're all getting read within one second. */
+ * are plugged in, they're all getting read within one second.
+ */
 
 #define MAX_RETRIES     10
 #define RETRY_DELAY     (3 * HZ)
@@ -604,9 +621,11 @@ static void fw_device_init(struct work_struct *work)
                 container_of(work, struct fw_device, work.work);
         int minor, err;
 
-        /* All failure paths here set node->data to NULL, so that we
+        /*
+         * All failure paths here set node->data to NULL, so that we
          * don't try to do device_for_each_child() on a kfree()'d
-         * device. */
+         * device.
+         */
 
         if (read_bus_info_block(device) < 0) {
                 if (device->config_rom_retries < MAX_RETRIES) {
@@ -647,13 +666,15 @@ static void fw_device_init(struct work_struct *work)
 
         create_units(device);
 
-        /* Transition the device to running state.  If it got pulled
+        /*
+         * Transition the device to running state.  If it got pulled
          * out from under us while we did the intialization work, we
          * have to shut down the device again here.  Normally, though,
          * fw_node_event will be responsible for shutting it down when
          * necessary.  We have to use the atomic cmpxchg here to avoid
          * racing with the FW_NODE_DESTROYED case in
-         * fw_node_event(). */
+         * fw_node_event().
+         */
         if (atomic_cmpxchg(&device->state,
                     FW_DEVICE_INITIALIZING,
                     FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
@@ -662,10 +683,12 @@ static void fw_device_init(struct work_struct *work)
                 fw_notify("created new fw device %s (%d config rom retries)\n",
                           device->device.bus_id, device->config_rom_retries);
 
-        /* Reschedule the IRM work if we just finished reading the
+        /*
+         * Reschedule the IRM work if we just finished reading the
          * root node config rom.  If this races with a bus reset we
          * just end up running the IRM work a couple of extra times -
-         * pretty harmless. */
+         * pretty harmless.
+         */
         if (device->node == device->card->root_node)
                 schedule_delayed_work(&device->card->work, 0);
 
@@ -716,12 +739,14 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
                 if (device == NULL)
                         break;
 
-                /* Do minimal intialization of the device here, the
+                /*
+                 * Do minimal intialization of the device here, the
                  * rest will happen in fw_device_init().  We need the
                  * card and node so we can read the config rom and we
                  * need to do device_initialize() now so
                  * device_for_each_child() in FW_NODE_UPDATED is
-                 * doesn't freak out. */
+                 * doesn't freak out.
+                 */
                 device_initialize(&device->device);
                 atomic_set(&device->state, FW_DEVICE_INITIALIZING);
                 device->card = fw_card_get(card);
@@ -730,15 +755,19 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
                 device->generation = card->generation;
                 INIT_LIST_HEAD(&device->client_list);
 
-                /* Set the node data to point back to this device so
+                /*
+                 * Set the node data to point back to this device so
                  * FW_NODE_UPDATED callbacks can update the node_id
-                 * and generation for the device. */
+                 * and generation for the device.
+                 */
                 node->data = device;
 
-                /* Many devices are slow to respond after bus resets,
+                /*
+                 * Many devices are slow to respond after bus resets,
                  * especially if they are bus powered and go through
                  * power-up after getting plugged in.  We schedule the
-                 * first config rom scan half a second after bus reset. */
+                 * first config rom scan half a second after bus reset.
+                 */
                 INIT_DELAYED_WORK(&device->work, fw_device_init);
                 schedule_delayed_work(&device->work, INITIAL_DELAY);
                 break;
@@ -761,7 +790,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
                 if (!node->data)
                         break;
 
-                /* Destroy the device associated with the node.  There
+                /*
+                 * Destroy the device associated with the node.  There
                  * are two cases here: either the device is fully
                  * initialized (FW_DEVICE_RUNNING) or we're in the
                  * process of reading its config rom
@@ -770,7 +800,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
                  * full fw_device_shutdown().  If not, there's work
                  * scheduled to read it's config rom, and we just put
                  * the device in shutdown state to have that code fail
-                 * to create the device. */
+                 * to create the device.
+                 */
                 device = node->data;
                 if (atomic_xchg(&device->state,
                                 FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) {
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index c167d59da68a..0ba9d64ccf4c 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -1,7 +1,4 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-device.h - Device probing and sysfs code.
- *
+/*
  * Copyright (C) 2005-2006  Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/firewire/fw-iso.c b/drivers/firewire/fw-iso.c
index 2ce26db656e0..2b640e9be6de 100644
--- a/drivers/firewire/fw-iso.c
+++ b/drivers/firewire/fw-iso.c
@@ -1,6 +1,6 @@
-/*                                              -*- c-basic-offset: 8 -*-
+/*
+ * Isochronous IO functionality
  *
- * fw-iso.c - Isochronous IO
  * Copyright (C) 2006 Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 34eb4681e272..beb924403dab 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -1,6 +1,6 @@
-/*                                              -*- c-basic-offset: 8 -*-
+/*
+ * Driver for OHCI 1394 controllers
  *
- * fw-ohci.c - Driver for OHCI 1394 boards
  * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -141,8 +141,10 @@ struct fw_ohci {
         int request_generation;
         u32 bus_seconds;
 
-        /* Spinlock for accessing fw_ohci data.  Never call out of
-         * this driver with this lock held. */
+        /*
+         * Spinlock for accessing fw_ohci data.  Never call out of
+         * this driver with this lock held.
+         */
         spinlock_t lock;
         u32 self_id_buffer[512];
 
@@ -328,13 +330,15 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
         p.timestamp  = status & 0xffff;
         p.generation = ohci->request_generation;
 
-        /* The OHCI bus reset handler synthesizes a phy packet with
+        /*
+         * The OHCI bus reset handler synthesizes a phy packet with
          * the new generation number when a bus reset happens (see
          * section 8.4.2.3).  This helps us determine when a request
          * was received and make sure we send the response in the same
          * generation.  We only need this for requests; for responses
          * we use the unique tlabel for finding the matching
-         * request. */
+         * request.
+         */
 
         if (p.ack + 16 == 0x09)
                 ohci->request_generation = (buffer[2] >> 16) & 0xff;
@@ -360,9 +364,11 @@ static void ar_context_tasklet(unsigned long data)
         if (d->res_count == 0) {
                 size_t size, rest, offset;
 
-                /* This descriptor is finished and we may have a
+                /*
+                 * This descriptor is finished and we may have a
                  * packet split across this and the next buffer. We
-                 * reuse the page for reassembling the split packet. */
+                 * reuse the page for reassembling the split packet.
+                 */
 
                 offset = offsetof(struct ar_buffer, data);
                 dma_unmap_single(ohci->card.device,
@@ -473,11 +479,13 @@ context_init(struct context *ctx, struct fw_ohci *ohci,
         ctx->tail_descriptor      = ctx->buffer;
         ctx->tail_descriptor_last = ctx->buffer;
 
-        /* We put a dummy descriptor in the buffer that has a NULL
+        /*
+         * We put a dummy descriptor in the buffer that has a NULL
          * branch address and looks like it's been sent.  That way we
          * have a descriptor to append DMA programs to.  Also, the
          * ring buffer invariant is that it always has at least one
-         * element so that head == tail means buffer full. */
+         * element so that head == tail means buffer full.
+         */
 
         memset(ctx->head_descriptor, 0, sizeof *ctx->head_descriptor);
         ctx->head_descriptor->control = cpu_to_le16(descriptor_output_last);
@@ -575,9 +583,11 @@ struct driver_data {
         struct fw_packet *packet;
 };
 
-/* This function apppends a packet to the DMA queue for transmission.
+/*
+ * This function apppends a packet to the DMA queue for transmission.
  * Must always be called with the ochi->lock held to ensure proper
- * generation handling and locking around packet queue manipulation. */
+ * generation handling and locking around packet queue manipulation.
+ */
 static int
 at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
 {
@@ -598,10 +608,12 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet)
         d[0].control   = cpu_to_le16(descriptor_key_immediate);
         d[0].res_count = cpu_to_le16(packet->timestamp);
 
-        /* The DMA format for asyncronous link packets is different
+        /*
+         * The DMA format for asyncronous link packets is different
          * from the IEEE1394 layout, so shift the fields around
          * accordingly.  If header_length is 8, it's a PHY packet, to
-         * which we need to prepend an extra quadlet. */
+         * which we need to prepend an extra quadlet.
+         */
 
         header = (__le32 *) &d[1];
         if (packet->header_length > 8) {
@@ -703,14 +715,18 @@ static int handle_at_packet(struct context *context,
                 break;
 
         case OHCI1394_evt_flushed:
-                /* The packet was flushed should give same error as
-                 * when we try to use a stale generation count. */
+                /*
+                 * The packet was flushed should give same error as
+                 * when we try to use a stale generation count.
+                 */
                 packet->ack = RCODE_GENERATION;
                 break;
 
         case OHCI1394_evt_missing_ack:
-                /* Using a valid (current) generation count, but the
-                 * node is not on the bus or not sending acks. */
+                /*
+                 * Using a valid (current) generation count, but the
+                 * node is not on the bus or not sending acks.
+                 */
                 packet->ack = RCODE_NO_ACK;
                 break;
 
@@ -887,10 +903,12 @@ static void bus_reset_tasklet(unsigned long data)
         }
         ohci->node_id = reg & 0xffff;
 
-        /* The count in the SelfIDCount register is the number of
+        /*
+         * The count in the SelfIDCount register is the number of
          * bytes in the self ID receive buffer.  Since we also receive
          * the inverted quadlets and a header quadlet, we shift one
-         * bit extra to get the actual number of self IDs. */
+         * bit extra to get the actual number of self IDs.
+         */
 
         self_id_count = (reg_read(ohci, OHCI1394_SelfIDCount) >> 3) & 0x3ff;
         generation = (le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
@@ -901,7 +919,8 @@ static void bus_reset_tasklet(unsigned long data)
                 ohci->self_id_buffer[j] = le32_to_cpu(ohci->self_id_cpu[i]);
         }
 
-        /* Check the consistency of the self IDs we just read.  The
+        /*
+         * Check the consistency of the self IDs we just read.  The
          * problem we face is that a new bus reset can start while we
          * read out the self IDs from the DMA buffer. If this happens,
          * the DMA buffer will be overwritten with new self IDs and we
@@ -911,7 +930,8 @@ static void bus_reset_tasklet(unsigned long data)
          * self IDs in the buffer before reading them out and compare
          * it to the current generation after reading them out.  If
          * the two generations match we know we have a consistent set
-         * of self IDs. */
+         * of self IDs.
+         */
 
         new_generation = (reg_read(ohci, OHCI1394_SelfIDCount) >> 16) & 0xff;
         if (new_generation != generation) {
@@ -928,12 +948,14 @@ static void bus_reset_tasklet(unsigned long data)
         context_stop(&ohci->at_response_ctx);
         reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset);
 
-        /* This next bit is unrelated to the AT context stuff but we
+        /*
+         * This next bit is unrelated to the AT context stuff but we
          * have to do it under the spinlock also.  If a new config rom
          * was set up before this reset, the old one is now no longer
          * in use and we can free it. Update the config rom pointers
          * to point to the current config rom and clear the
-         * next_config_rom pointer so a new udpate can take place. */
+         * next_config_rom pointer so a new udpate can take place.
+         */
 
         if (ohci->next_config_rom != NULL) {
                 dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
@@ -942,10 +964,12 @@ static void bus_reset_tasklet(unsigned long data)
                 ohci->config_rom_bus  = ohci->next_config_rom_bus;
                 ohci->next_config_rom = NULL;
 
-                /* Restore config_rom image and manually update
+                /*
+                 * Restore config_rom image and manually update
                  * config_rom registers.  Writing the header quadlet
                  * will indicate that the config rom is ready, so we
-                 * do that last. */
+                 * do that last.
+                 */
                 reg_write(ohci, OHCI1394_BusOptions,
                           be32_to_cpu(ohci->config_rom[2]));
                 ohci->config_rom[0] = cpu_to_be32(ohci->next_header);
@@ -1018,7 +1042,8 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
         struct fw_ohci *ohci = fw_ohci(card);
         struct pci_dev *dev = to_pci_dev(card->device);
 
-        /* When the link is not yet enabled, the atomic config rom
+        /*
+         * When the link is not yet enabled, the atomic config rom
          * update mechanism described below in ohci_set_config_rom()
          * is not active.  We have to update ConfigRomHeader and
          * BusOptions manually, and the write to ConfigROMmap takes
@@ -1067,8 +1092,10 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
                   OHCI1394_HCControl_BIBimageValid);
         flush_writes(ohci);
 
-        /* We are ready to go, initiate bus reset to finish the
-         * initialization. */
+        /*
+         * We are ready to go, initiate bus reset to finish the
+         * initialization.
+         */
 
         fw_core_initiate_bus_reset(&ohci->card, 1);
 
@@ -1086,7 +1113,8 @@ ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length)
 
         ohci = fw_ohci(card);
 
-        /* When the OHCI controller is enabled, the config rom update
+        /*
+         * When the OHCI controller is enabled, the config rom update
          * mechanism is a bit tricky, but easy enough to use.  See
          * section 5.5.6 in the OHCI specification.
          *
@@ -1141,11 +1169,13 @@ ohci_set_config_rom(struct fw_card *card, u32 *config_rom, size_t length)
 
         spin_unlock_irqrestore(&ohci->lock, flags);
 
-        /* Now initiate a bus reset to have the changes take
+        /*
+         * Now initiate a bus reset to have the changes take
          * effect. We clean up the old config rom memory and DMA
          * mappings in the bus reset tasklet, since the OHCI
          * controller could need to access it before the bus reset
-         * takes effect. */
+         * takes effect.
+         */
         if (retval == 0)
                 fw_core_initiate_bus_reset(&ohci->card, 1);
 
@@ -1196,8 +1226,10 @@ ohci_enable_phys_dma(struct fw_card *card, int node_id, int generation)
         unsigned long flags;
         int n, retval = 0;
 
-        /* FIXME:  Make sure this bitmask is cleared when we clear the busReset
-         * interrupt bit.  Clear physReqResourceAllBuses on bus reset. */
+        /*
+         * FIXME:  Make sure this bitmask is cleared when we clear the busReset
+         * interrupt bit.  Clear physReqResourceAllBuses on bus reset.
+         */
 
         spin_lock_irqsave(&ohci->lock, flags);
 
@@ -1206,8 +1238,10 @@ ohci_enable_phys_dma(struct fw_card *card, int node_id, int generation)
                 goto out;
         }
 
-        /* NOTE, if the node ID contains a non-local bus ID, physical DMA is
-         * enabled for _all_ nodes on remote buses. */
+        /*
+         * Note, if the node ID contains a non-local bus ID, physical DMA is
+         * enabled for _all_ nodes on remote buses.
+         */
 
         n = (node_id & 0xffc0) == LOCAL_BUS ? node_id & 0x3f : 63;
         if (n < 32)
@@ -1257,11 +1291,13 @@ static int handle_ir_dualbuffer_packet(struct context *context,
         p = db + 1;
         end = p + header_length;
         while (p < end && i + ctx->base.header_size <= PAGE_SIZE) {
-                /* The iso header is byteswapped to little endian by
+                /*
+                 * The iso header is byteswapped to little endian by
                  * the controller, but the remaining header quadlets
                  * are big endian.  We want to present all the headers
                  * as big endian, so we have to swap the first
-                 * quadlet. */
+                 * quadlet.
+                 */
                 *(u32 *) (ctx->header + i) = __swab32(*(u32 *) (p + 4));
                 memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4);
                 i += ctx->base.header_size;
@@ -1457,8 +1493,10 @@ ohci_queue_iso_transmit(struct fw_iso_context *base,
         u32 payload_index, payload_end_index, next_page_index;
         int page, end_page, i, length, offset;
 
-        /* FIXME: Cycle lost behavior should be configurable: lose
-         * packet, retransmit or terminate.. */
+        /*
+         * FIXME: Cycle lost behavior should be configurable: lose
+         * packet, retransmit or terminate..
+         */
 
         p = packet;
         payload_index = payload;
@@ -1553,8 +1591,10 @@ ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base,
         u32 z, header_z, length, rest;
         int page, offset, packet_count, header_size;
 
-        /* FIXME: Cycle lost behavior should be configurable: lose
-         * packet, retransmit or terminate.. */
+        /*
+         * FIXME: Cycle lost behavior should be configurable: lose
+         * packet, retransmit or terminate..
+         */
 
         if (packet->skip) {
                 d = context_get_descriptors(&ctx->context, 2, &d_bus);
@@ -1572,8 +1612,10 @@ ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base,
         p = packet;
         z = 2;
 
-        /* The OHCI controller puts the status word in the header
-         * buffer too, so we need 4 extra bytes per packet. */
+        /*
+         * The OHCI controller puts the status word in the header
+         * buffer too, so we need 4 extra bytes per packet.
+         */
         packet_count = p->header_length / ctx->base.header_size;
         header_size = packet_count * (ctx->base.header_size + 4);
 
@@ -1673,8 +1715,6 @@ static int software_reset(struct fw_ohci *ohci)
         return -EBUSY;
 }
 
-/* ---------- pci subsystem interface ---------- */
-
 enum {
         CLEANUP_SELF_ID,
         CLEANUP_REGISTERS,
@@ -1753,11 +1793,13 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
                 return cleanup(ohci, CLEANUP_REGISTERS, -EBUSY);
         }
 
-        /* Now enable LPS, which we need in order to start accessing
+        /*
+         * Now enable LPS, which we need in order to start accessing
          * most of the registers.  In fact, on some cards (ALI M5251),
          * accessing registers in the SClk domain without LPS enabled
          * will lock up the machine.  Wait 50msec to make sure we have
-         * full link enabled.  */
+         * full link enabled.
+         */
         reg_write(ohci, OHCI1394_HCControlSet,
                   OHCI1394_HCControl_LPS |
                   OHCI1394_HCControl_postedWriteEnable);
@@ -1854,8 +1896,10 @@ static void pci_remove(struct pci_dev *dev)
         flush_writes(ohci);
         fw_core_remove_card(&ohci->card);
 
-        /* FIXME: Fail all pending packets here, now that the upper
-         * layers can't queue any more. */
+        /*
+         * FIXME: Fail all pending packets here, now that the upper
+         * layers can't queue any more.
+         */
 
         software_reset(ohci);
         free_irq(dev->irq, ohci);
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 7ce9b811431a..eb3bddb162e4 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -1,5 +1,5 @@
-/*                                              -*- c-basic-offset: 8 -*-
- * fw-spb2.c -- SBP2 driver (SCSI over IEEE1394)
+/*
+ * SBP2 driver (SCSI over IEEE1394)
  *
  * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
  *
@@ -18,7 +18,8 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-/* The basic structure of this driver is based the old storage driver,
+/*
+ * The basic structure of this driver is based on the old storage driver,
  * drivers/ieee1394/sbp2.c, originally written by
  *     James Goodwin <jamesg@filanet.com>
  * with later contributions and ongoing maintenance from
@@ -60,11 +61,13 @@ struct sbp2_device {
         u32 workarounds;
         int login_id;
 
-        /* We cache these addresses and only update them once we've
+        /*
+         * We cache these addresses and only update them once we've
          * logged in or reconnected to the sbp2 device.  That way, any
          * IO to the device will automatically fail and get retried if
          * it happens in a window where the device is not ready to
-         * handle it (e.g. after a bus reset but before we reconnect). */
+         * handle it (e.g. after a bus reset but before we reconnect).
+         */
         int node_id;
         int address_high;
         int generation;
@@ -239,10 +242,14 @@ static const struct {
                 .model                  = ~0,
                 .workarounds            = SBP2_WORKAROUND_128K_MAX_TRANS,
         },
-        /* There are iPods (2nd gen, 3rd gen) with model_id == 0, but
+
+        /*
+         * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
          * these iPods do not feature the read_capacity bug according
          * to one report.  Read_capacity behaviour as well as model_id
-         * could change due to Apple-supplied firmware updates though. */
+         * could change due to Apple-supplied firmware updates though.
+         */
+
         /* iPod 4th generation. */ {
                 .firmware_revision      = 0x0a2700,
                 .model                  = 0x000021,
@@ -398,9 +405,10 @@ sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
         if (orb == NULL)
                 return -ENOMEM;
 
-        /* The sbp2 device is going to send a block read request to
-         * read out the request from host memory, so map it for
-         * dma. */
+        /*
+         * The sbp2 device is going to send a block read request to
+         * read out the request from host memory, so map it for dma.
+         */
         orb->base.request_bus =
                 dma_map_single(device->card->device, &orb->request,
                                sizeof orb->request, DMA_TO_DEVICE);
@@ -426,10 +434,11 @@ sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
         orb->request.status_fifo.high = sd->address_handler.offset >> 32;
         orb->request.status_fifo.low  = sd->address_handler.offset;
 
-        /* FIXME: Yeah, ok this isn't elegant, we hardwire exclusive
+        /*
+         * FIXME: Yeah, ok this isn't elegant, we hardwire exclusive
          * login and 1 second reconnect time.  The reconnect setting
-         * is probably fine, but the exclusive login should be an
-         * option. */
+         * is probably fine, but the exclusive login should be an option.
+         */
         if (function == SBP2_LOGIN_REQUEST) {
                 orb->request.misc |=
                         management_orb_exclusive |
@@ -592,8 +601,10 @@ static void sbp2_login(struct work_struct *work)
                 sbp2_send_management_orb(unit, sd->node_id, sd->generation,
                                          SBP2_LOGOUT_REQUEST, sd->login_id,
                                          NULL);
-                /* Set this back to sbp2_login so we fall back and
-                 * retry login on bus reset. */
+                /*
+                 * Set this back to sbp2_login so we fall back and
+                 * retry login on bus reset.
+                 */
                 PREPARE_DELAYED_WORK(&sd->work, sbp2_login);
         }
         kref_put(&sd->kref, release_sbp2_device);
@@ -633,9 +644,11 @@ static int sbp2_probe(struct device *dev)
                 return -EBUSY;
         }
 
-        /* Scan unit directory to get management agent address,
+        /*
+         * Scan unit directory to get management agent address,
          * firmware revison and model.  Initialize firmware_revision
-         * and model to values that wont match anything in our table. */
+         * and model to values that wont match anything in our table.
+         */
         firmware_revision = 0xff000000;
         model = 0xff000000;
         fw_csr_iterator_init(&ci, unit->directory);
@@ -673,9 +686,11 @@ static int sbp2_probe(struct device *dev)
 
         get_device(&unit->device);
 
-        /* We schedule work to do the login so we can easily
+        /*
+         * We schedule work to do the login so we can easily
          * reschedule retries. Always get the ref before scheduling
-         * work.*/
+         * work.
+         */
         INIT_DELAYED_WORK(&sd->work, sbp2_login);
         if (schedule_delayed_work(&sd->work, 0))
                 kref_get(&sd->kref);
@@ -834,9 +849,11 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
                         result = sbp2_status_to_sense_data(status_get_data(*status),
                                                            orb->cmd->sense_buffer);
         } else {
-                /* If the orb completes with status == NULL, something
+                /*
+                 * If the orb completes with status == NULL, something
                  * went wrong, typically a bus reset happened mid-orb
-                 * or when sending the write (less likely). */
+                 * or when sending the write (less likely).
+                 */
                 result = DID_BUS_BUSY << 16;
         }
 
@@ -878,11 +895,13 @@ static void sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
         count = dma_map_sg(device->card->device, sg, orb->cmd->use_sg,
                            orb->cmd->sc_data_direction);
 
-        /* Handle the special case where there is only one element in
+        /*
+         * Handle the special case where there is only one element in
          * the scatter list by converting it to an immediate block
          * request. This is also a workaround for broken devices such
          * as the second generation iPod which doesn't support page
-         * tables. */
+         * tables.
+         */
         if (count == 1 && sg_dma_len(sg) < SBP2_MAX_SG_ELEMENT_LENGTH) {
                 orb->request.data_descriptor.high = sd->address_high;
                 orb->request.data_descriptor.low  = sg_dma_address(sg);
@@ -891,8 +910,10 @@ static void sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
                 return;
         }
 
-        /* Convert the scatterlist to an sbp2 page table.  If any
-         * scatterlist entries are too big for sbp2 we split the as we go. */
+        /*
+         * Convert the scatterlist to an sbp2 page table.  If any
+         * scatterlist entries are too big for sbp2 we split the as we go.
+         */
         for (i = 0, j = 0; i < count; i++) {
                 sg_len = sg_dma_len(sg + i);
                 sg_addr = sg_dma_address(sg + i);
@@ -908,11 +929,13 @@ static void sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
 
         size = sizeof orb->page_table[0] * j;
 
-        /* The data_descriptor pointer is the one case where we need
+        /*
+         * The data_descriptor pointer is the one case where we need
          * to fill in the node ID part of the address.  All other
          * pointers assume that the data referenced reside on the
          * initiator (i.e. us), but data_descriptor can refer to data
-         * on other nodes so we need to put our ID in descriptor.high. */
+         * on other nodes so we need to put our ID in descriptor.high.
+         */
 
         orb->page_table_bus =
                 dma_map_single(device->card->device, orb->page_table,
@@ -933,8 +956,10 @@ static void sbp2_command_orb_map_buffer(struct sbp2_command_orb *orb)
         struct fw_device *device = fw_device(unit->device.parent);
         struct sbp2_device *sd = unit->device.driver_data;
 
-        /* As for map_scatterlist, we need to fill in the high bits of
-         * the data_descriptor pointer. */
+        /*
+         * As for map_scatterlist, we need to fill in the high bits of
+         * the data_descriptor pointer.
+         */
 
         orb->request_buffer_bus =
                 dma_map_single(device->card->device,
@@ -956,8 +981,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         struct sbp2_device *sd = unit->device.driver_data;
         struct sbp2_command_orb *orb;
 
-        /* Bidirectional commands are not yet implemented, and unknown
-         * transfer direction not handled. */
+        /*
+         * Bidirectional commands are not yet implemented, and unknown
+         * transfer direction not handled.
+         */
         if (cmd->sc_data_direction == DMA_BIDIRECTIONAL) {
                 fw_error("Cannot handle DMA_BIDIRECTIONAL - rejecting command");
                 goto fail_alloc;
@@ -983,10 +1010,12 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 
         orb->request.next.high   = SBP2_ORB_NULL;
         orb->request.next.low    = 0x0;
-        /* At speed 100 we can do 512 bytes per packet, at speed 200,
+        /*
+         * At speed 100 we can do 512 bytes per packet, at speed 200,
          * 1024 bytes per packet etc.  The SBP-2 max_payload field
          * specifies the max payload size as 2 ^ (max_payload + 2), so
-         * if we set this to max_speed + 7, we get the right value. */
+         * if we set this to max_speed + 7, we get the right value.
+         */
         orb->request.misc =
                 command_orb_max_payload(device->node->max_speed + 7) |
                 command_orb_speed(device->node->max_speed) |
@@ -1002,9 +1031,11 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
         if (cmd->use_sg) {
                 sbp2_command_orb_map_scatterlist(orb);
         } else if (cmd->request_bufflen > SBP2_MAX_SG_ELEMENT_LENGTH) {
-                /* FIXME: Need to split this into a sg list... but
+                /*
+                 * FIXME: Need to split this into a sg list... but
                  * could we get the scsi or blk layer to do that by
-                 * reporting our max supported block size? */
+                 * reporting our max supported block size?
+                 */
                 fw_error("command > 64k\n");
                 goto fail_bufflen;
         } else if (cmd->request_bufflen > 0) {
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index 018c6b8afba6..c26d5d5e8d53 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -1,6 +1,5 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-topology.c - Incremental bus scan, based on bus topology
+/*
+ * Incremental bus scan, based on bus topology
  *
  * Copyright (C) 2004-2006 Kristian Hoegsberg <krh@bitplanet.net>
  *
@@ -69,10 +68,12 @@ static u32 *count_ports(u32 *sid, int *total_port_count, int *child_port_count)
                         sid++;
                         q = *sid;
 
-                        /* Check that the extra packets actually are
+                        /*
+                         * Check that the extra packets actually are
                          * extended self ID packets and that the
                          * sequence numbers in the extended self ID
-                         * packets increase as expected. */
+                         * packets increase as expected.
+                         */
 
                         if (!self_id_extended(q) ||
                             seq != self_id_ext_sequence(q))
@@ -113,7 +114,8 @@ static struct fw_node *fw_node_create(u32 sid, int port_count, int color)
         return node;
 }
 
-/* Compute the maximum hop count for this node and it's children.  The
+/*
+ * Compute the maximum hop count for this node and it's children.  The
  * maximum hop count is the maximum number of connections between any
  * two nodes in the subtree rooted at this node.  We need this for
  * setting the gap count.  As we build the tree bottom up in
@@ -202,8 +204,10 @@ static struct fw_node *build_tree(struct fw_card *card,
                         return NULL;
                 }
 
-                /* Seek back from the top of our stack to find the
-                 * start of the child nodes for this node. */
+                /*
+                 * Seek back from the top of our stack to find the
+                 * start of the child nodes for this node.
+                 */
                 for (i = 0, h = &stack; i < child_port_count; i++)
                         h = h->prev;
                 child = fw_node(h);
@@ -230,7 +234,8 @@ static struct fw_node *build_tree(struct fw_card *card,
                 for (i = 0; i < port_count; i++) {
                         switch (get_port_type(sid, i)) {
                         case SELFID_PORT_PARENT:
-                                /* Who's your daddy?  We dont know the
+                                /*
+                                 * Who's your daddy?  We dont know the
                                  * parent node at this time, so we
                                  * temporarily abuse node->color for
                                  * remembering the entry in the
@@ -245,8 +250,10 @@ static struct fw_node *build_tree(struct fw_card *card,
 
                         case SELFID_PORT_CHILD:
                                 node->ports[i].node = child;
-                                /* Fix up parent reference for this
-                                 * child node. */
+                                /*
+                                 * Fix up parent reference for this
+                                 * child node.
+                                 */
                                 child->ports[child->color].node = node;
                                 child->color = card->color;
                                 child = fw_node(child->link.next);
@@ -254,9 +261,11 @@ static struct fw_node *build_tree(struct fw_card *card,
                         }
                 }
 
-                /* Check that the node reports exactly one parent
+                /*
+                 * Check that the node reports exactly one parent
                  * port, except for the root, which of course should
-                 * have no parents. */
+                 * have no parents.
+                 */
                 if ((next_sid == end && parent_count != 0) ||
                     (next_sid < end && parent_count != 1)) {
                         fw_error("Parent port inconsistency for node %d: "
@@ -269,9 +278,11 @@ static struct fw_node *build_tree(struct fw_card *card,
                 list_add_tail(&node->link, &stack);
                 stack_depth += 1 - child_port_count;
 
-                /* If all PHYs does not report the same gap count
+                /*
+                 * If all PHYs does not report the same gap count
                  * setting, we fall back to 63 which will force a gap
-                 * count reconfiguration and a reset. */
+                 * count reconfiguration and a reset.
+                 */
                 if (self_id_gap_count(q) != gap_count)
                         gap_count = 63;
 
@@ -427,9 +438,11 @@ update_tree(struct fw_card *card, struct fw_node *root)
 
                 for (i = 0; i < node0->port_count; i++) {
                         if (node0->ports[i].node && node1->ports[i].node) {
-                                /* This port didn't change, queue the
+                                /*
+                                 * This port didn't change, queue the
                                  * connected node for further
-                                 * investigation. */
+                                 * investigation.
+                                 */
                                 if (node0->ports[i].node->color == card->color)
                                         continue;
                                 list_add_tail(&node0->ports[i].node->link,
@@ -437,19 +450,23 @@ update_tree(struct fw_card *card, struct fw_node *root)
                                 list_add_tail(&node1->ports[i].node->link,
                                               &list1);
                         } else if (node0->ports[i].node) {
-                                /* The nodes connected here were
+                                /*
+                                 * The nodes connected here were
                                  * unplugged; unref the lost nodes and
                                  * queue FW_NODE_LOST callbacks for
-                                 * them. */
+                                 * them.
+                                 */
 
                                 for_each_fw_node(card, node0->ports[i].node,
                                                  report_lost_node);
                                 node0->ports[i].node = NULL;
                         } else if (node1->ports[i].node) {
-                                /* One or more node were connected to
+                                /*
+                                 * One or more node were connected to
                                  * this port. Move the new nodes into
                                  * the tree and queue FW_NODE_CREATED
-                                 * callbacks for them. */
+                                 * callbacks for them.
+                                 */
                                 move_tree(node0, node1, i);
                                 for_each_fw_node(card, node0->ports[i].node,
                                                  report_found_node);
@@ -486,9 +503,11 @@ fw_core_handle_bus_reset(struct fw_card *card,
 
         spin_lock_irqsave(&card->lock, flags);
 
-        /* If the new topology has a different self_id_count the topology
+        /*
+         * If the new topology has a different self_id_count the topology
          * changed, either nodes were added or removed. In that case we
-         * reset the IRM reset counter. */
+         * reset the IRM reset counter.
+         */
         if (card->self_id_count != self_id_count)
                 card->bm_retries = 0;
 
diff --git a/drivers/firewire/fw-topology.h b/drivers/firewire/fw-topology.h
index 0778077e9d80..be2a6bed3847 100644
--- a/drivers/firewire/fw-topology.h
+++ b/drivers/firewire/fw-topology.h
@@ -1,7 +1,4 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-topology.h -- Incremental bus scan, based on bus topology
- *
+/*
  * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index d36dd512a59d..e4355de710fa 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -1,6 +1,5 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-transaction.c - core IEEE1394 transaction logic
+/*
+ * Core IEEE1394 transaction logic
  *
  * Copyright (C) 2004-2006 Kristian Hoegsberg <krh@bitplanet.net>
  *
@@ -85,21 +84,27 @@ close_transaction(struct fw_transaction *transaction,
         return -ENOENT;
 }
 
-/* Only valid for transactions that are potentially pending (ie have
- * been sent). */
+/*
+ * Only valid for transactions that are potentially pending (ie have
+ * been sent).
+ */
 int
 fw_cancel_transaction(struct fw_card *card,
                       struct fw_transaction *transaction)
 {
-        /* Cancel the packet transmission if it's still queued.  That
+        /*
+         * Cancel the packet transmission if it's still queued.  That
          * will call the packet transmission callback which cancels
-         * the transaction. */
+         * the transaction.
+         */
 
         if (card->driver->cancel_packet(card, &transaction->packet) == 0)
                 return 0;
 
-        /* If the request packet has already been sent, we need to see
-         * if the transaction is still pending and remove it in that case. */
+        /*
+         * If the request packet has already been sent, we need to see
+         * if the transaction is still pending and remove it in that case.
+         */
 
         return close_transaction(transaction, card, RCODE_CANCELLED, NULL, 0);
 }
@@ -131,8 +136,10 @@ transmit_complete_callback(struct fw_packet *packet,
                 close_transaction(t, card, RCODE_TYPE_ERROR, NULL, 0);
                 break;
         default:
-                /* In this case the ack is really a juju specific
-                 * rcode, so just forward that to the callback. */
+                /*
+                 * In this case the ack is really a juju specific
+                 * rcode, so just forward that to the callback.
+                 */
                 close_transaction(t, card, status, NULL, 0);
                 break;
         }
@@ -243,13 +250,17 @@ fw_send_request(struct fw_card *card, struct fw_transaction *t,
         unsigned long flags;
         int tlabel, source;
 
-        /* Bump the flush timer up 100ms first of all so we
-         * don't race with a flush timer callback. */
+        /*
+         * Bump the flush timer up 100ms first of all so we
+         * don't race with a flush timer callback.
+         */
 
         mod_timer(&card->flush_timer, jiffies + DIV_ROUND_UP(HZ, 10));
 
-        /* Allocate tlabel from the bitmap and put the transaction on
-         * the list while holding the card spinlock. */
+        /*
+         * Allocate tlabel from the bitmap and put the transaction on
+         * the list while holding the card spinlock.
+         */
 
         spin_lock_irqsave(&card->lock, flags);
 
@@ -336,9 +347,11 @@ void fw_flush_transactions(struct fw_card *card)
         list_for_each_entry_safe(t, next, &list, link) {
                 card->driver->cancel_packet(card, &t->packet);
 
-                /* At this point cancel_packet will never call the
+                /*
+                 * At this point cancel_packet will never call the
                  * transaction callback, since we just took all the
-                 * transactions out of the list.  So do it here.*/
+                 * transactions out of the list.  So do it here.
+                 */
                 t->callback(card, RCODE_CANCELLED, NULL, 0, t->callback_data);
         }
 }
@@ -587,9 +600,11 @@ allocate_request(struct fw_packet *p)
 void
 fw_send_response(struct fw_card *card, struct fw_request *request, int rcode)
 {
-        /* Broadcast packets are reported as ACK_COMPLETE, so this
+        /*
+         * Broadcast packets are reported as ACK_COMPLETE, so this
          * check is sufficient to ensure we don't send response to
-         * broadcast packets or posted writes. */
+         * broadcast packets or posted writes.
+         */
         if (request->ack != ACK_PENDING)
                 return;
 
@@ -639,11 +654,13 @@ fw_core_handle_request(struct fw_card *card, struct fw_packet *p)
                                                    offset, request->length);
         spin_unlock_irqrestore(&address_handler_lock, flags);
 
-        /* FIXME: lookup the fw_node corresponding to the sender of
+        /*
+         * FIXME: lookup the fw_node corresponding to the sender of
          * this request and pass that to the address handler instead
          * of the node ID.  We may also want to move the address
          * allocations to fw_node so we only do this callback if the
-         * upper layers registered it for this node. */
+         * upper layers registered it for this node.
+         */
 
         if (handler == NULL)
                 fw_send_response(card, request, RCODE_ADDRESS_ERROR);
@@ -687,8 +704,10 @@ fw_core_handle_response(struct fw_card *card, struct fw_packet *p)
                 return;
         }
 
-        /* FIXME: sanity check packet, is length correct, does tcodes
-         * and addresses match. */
+        /*
+         * FIXME: sanity check packet, is length correct, does tcodes
+         * and addresses match.
+         */
 
         switch (tcode) {
         case TCODE_READ_QUADLET_RESPONSE:
@@ -790,11 +809,13 @@ handle_registers(struct fw_card *card, struct fw_request *request,
         case CSR_BANDWIDTH_AVAILABLE:
         case CSR_CHANNELS_AVAILABLE_HI:
         case CSR_CHANNELS_AVAILABLE_LO:
-                /* FIXME: these are handled by the OHCI hardware and
+                /*
+                 * FIXME: these are handled by the OHCI hardware and
                  * the stack never sees these request. If we add
                  * support for a new type of controller that doesn't
                  * handle this in hardware we need to deal with these
-                 * transactions. */
+                 * transactions.
+                 */
                 BUG();
                 break;
 
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index 63527340152b..1b7e4dc6c2c1 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -1,7 +1,4 @@
-/*                                              -*- c-basic-offset: 8 -*-
- *
- * fw-transaction.h - Header for IEEE1394 transaction logic
- *
+/*
  * Copyright (C) 2003-2006 Kristian Hoegsberg <krh@bitplanet.net>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -209,7 +206,8 @@ struct fw_packet {
         size_t payload_length;
         u32 timestamp;
 
-        /* This callback is called when the packet transmission has
+        /*
+         * This callback is called when the packet transmission has
          * completed; for successful transmission, the status code is
          * the ack received from the destination, otherwise it's a
          * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
@@ -230,8 +228,10 @@ struct fw_transaction {
 
         struct fw_packet packet;
 
-        /* The data passed to the callback is valid only during the
-         * callback.  */
+        /*
+         * The data passed to the callback is valid only during the
+         * callback.
+         */
         fw_transaction_callback_t callback;
         void *callback_data;
 };
@@ -291,8 +291,10 @@ struct fw_card {
         int link_speed;
         int config_rom_generation;
 
-        /* We need to store up to 4 self ID for a maximum of 63
-         * devices plus 3 words for the topology map header. */
+        /*
+         * We need to store up to 4 self ID for a maximum of 63
+         * devices plus 3 words for the topology map header.
+         */
         int self_id_count;
         u32 topology_map[252 + 3];
 
@@ -318,12 +320,14 @@ struct fw_card {
 struct fw_card *fw_card_get(struct fw_card *card);
 void fw_card_put(struct fw_card *card);
 
-/* The iso packet format allows for an immediate header/payload part
+/*
+ * The iso packet format allows for an immediate header/payload part
  * stored in 'header' immediately after the packet info plus an
  * indirect payload part that is pointer to by the 'payload' field.
  * Applications can use one or the other or both to implement simple
  * low-bandwidth streaming (e.g. audio) or more advanced
- * scatter-gather streaming (e.g. assembling video frame automatically). */
+ * scatter-gather streaming (e.g. assembling video frame automatically).
+ */
 
 struct fw_iso_packet {
         u16 payload_length;     /* Length of indirect payload. */
@@ -352,11 +356,13 @@ typedef void (*fw_iso_callback_t) (struct fw_iso_context *context,
                                    void *header,
                                    void *data);
 
-/* An iso buffer is just a set of pages mapped for DMA in the
+/*
+ * An iso buffer is just a set of pages mapped for DMA in the
  * specified direction.  Since the pages are to be used for DMA, they
  * are not mapped into the kernel virtual address space.  We store the
  * DMA address in the page private. The helper function
- * fw_iso_buffer_map() will map the pages into a given vma. */
+ * fw_iso_buffer_map() will map the pages into a given vma.
+ */
 
 struct fw_iso_buffer {
         enum dma_data_direction direction;
@@ -408,18 +414,22 @@ fw_iso_context_stop(struct fw_iso_context *ctx);
 struct fw_card_driver {
         const char *name;
 
-        /* Enable the given card with the given initial config rom.
+        /*
+         * Enable the given card with the given initial config rom.
          * This function is expected to activate the card, and either
          * enable the PHY or set the link_on bit and initiate a bus
-         * reset. */
+         * reset.
+         */
         int (*enable) (struct fw_card *card, u32 *config_rom, size_t length);
 
         int (*update_phy_reg) (struct fw_card *card, int address,
                                int clear_bits, int set_bits);
 
-        /* Update the config rom for an enabled card.  This function
+        /*
+         * Update the config rom for an enabled card.  This function
          * should change the config rom that is presented on the bus
-         * an initiate a bus reset. */
+         * an initiate a bus reset.
+         */
         int (*set_config_rom) (struct fw_card *card,
                                u32 *config_rom, size_t length);
 
@@ -428,12 +438,14 @@ struct fw_card_driver {
         /* Calling cancel is valid once a packet has been submitted. */
         int (*cancel_packet) (struct fw_card *card, struct fw_packet *packet);
 
-        /* Allow the specified node ID to do direct DMA out and in of
+        /*
+         * Allow the specified node ID to do direct DMA out and in of
          * host memory.  The card will disable this for all node when
          * a bus reset happens, so driver need to reenable this after
          * bus reset.  Returns 0 on success, -ENODEV if the card
          * doesn't support this, -ESTALE if the generation doesn't
-         * match. */
+         * match.
+         */
         int (*enable_phys_dma) (struct fw_card *card,
                                 int node_id, int generation);
 
@@ -473,15 +485,15 @@ void fw_flush_transactions(struct fw_card *card);
 void fw_send_phy_config(struct fw_card *card,
                         int node_id, int generation, int gap_count);
 
-/* Called by the topology code to inform the device code of node
- * activity; found, lost, or updated nodes */
+/*
+ * Called by the topology code to inform the device code of node
+ * activity; found, lost, or updated nodes.
+ */
 void
 fw_node_event(struct fw_card *card, struct fw_node *node, int event);
 
 /* API used by card level drivers */
 
-/* Do we need phy speed here also?  If we add more args, maybe we
-   should go back to struct fw_card_info. */
 void
 fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver,
                    struct device *device);