amd64_edac: add F10h-and-later methods-p2

Borislav:

- fix a wrong negation in f10_determine_base_addr_offset()
- fix a wrong mask in f10_determine_base_addr_offset() which should
select DctSelBaseAddr[31:11] and not [31:16] as it was before
- remove StinkyIdentifiers, trivially simplify code.
- fix/cleanup comments
- fix function return value patterns

Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

1 files changed, 196 insertions, 0 deletions

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index b4ef2c70500e..744a49ac9f5c 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1367,3 +1367,199 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
         pvt->dram_limit[dram] =
                 ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
 }
+
+static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
+{
+        int err = 0;
+
+        err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW,
+                                    &pvt->dram_ctl_select_low);
+        if (err) {
+                debugf0("Reading F10_DCTL_SEL_LOW failed\n");
+        } else {
+                debugf0("DRAM_DCTL_SEL_LOW=0x%x  DctSelBaseAddr=0x%x\n",
+                        pvt->dram_ctl_select_low, dct_sel_baseaddr(pvt));
+
+                debugf0("  DRAM DCTs are=%s DRAM Is=%s DRAM-Ctl-"
+                                "sel-hi-range=%s\n",
+                        (dct_ganging_enabled(pvt) ? "GANGED" : "NOT GANGED"),
+                        (dct_dram_enabled(pvt) ? "Enabled"   : "Disabled"),
+                        (dct_high_range_enabled(pvt) ? "Enabled" : "Disabled"));
+
+                debugf0("  DctDatIntLv=%s MemCleared=%s DctSelIntLvAddr=0x%x\n",
+                        (dct_data_intlv_enabled(pvt) ? "Enabled" : "Disabled"),
+                        (dct_memory_cleared(pvt) ? "True " : "False "),
+                        dct_sel_interleave_addr(pvt));
+        }
+
+        err = pci_read_config_dword(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH,
+                                    &pvt->dram_ctl_select_high);
+        if (err)
+                debugf0("Reading F10_DCTL_SEL_HIGH failed\n");
+}
+
+static u32 f10_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+                                int hi_range_sel, u32 intlv_en)
+{
+        u32 cs, temp, dct_sel_high = (pvt->dram_ctl_select_low >> 1) & 1;
+
+        if (dct_ganging_enabled(pvt))
+                cs = 0;
+        else if (hi_range_sel)
+                cs = dct_sel_high;
+        else if (dct_interleave_enabled(pvt)) {
+                if (dct_sel_interleave_addr(pvt) == 0)
+                        cs = sys_addr >> 6 & 1;
+                else if ((dct_sel_interleave_addr(pvt) >> 1) & 1) {
+                        temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) % 2;
+
+                        if (dct_sel_interleave_addr(pvt) & 1)
+                                cs = (sys_addr >> 9 & 1) ^ temp;
+                        else
+                                cs = (sys_addr >> 6 & 1) ^ temp;
+                } else if (intlv_en & 4)
+                        cs = sys_addr >> 15 & 1;
+                else if (intlv_en & 2)
+                        cs = sys_addr >> 14 & 1;
+                else if (intlv_en & 1)
+                        cs = sys_addr >> 13 & 1;
+                else
+                        cs = sys_addr >> 12 & 1;
+        } else if (dct_high_range_enabled(pvt) && !dct_ganging_enabled(pvt))
+                cs = ~dct_sel_high & 1;
+        else
+                cs = 0;
+
+        return cs;
+}
+
+static inline u32 f10_map_intlv_en_to_shift(u32 intlv_en)
+{
+        if (intlv_en == 1)
+                return 1;
+        else if (intlv_en == 3)
+                return 2;
+        else if (intlv_en == 7)
+                return 3;
+
+        return 0;
+}
+
+static inline u64 f10_determine_base_addr_offset(u64 sys_addr, int hi_range_sel,
+                                                 u32 dct_sel_base_addr,
+                                                 u64 dct_sel_base_off,
+                                                 u32 hole_en, u32 hole_off,
+                                                 u64 dram_base)
+{
+        u64 chan_off;
+
+        if (hi_range_sel) {
+                if (!(dct_sel_base_addr & 0xFFFFF800) &&
+                   (hole_en & 1) && (sys_addr >= 0x100000000ULL))
+                        chan_off = hole_off << 16;
+                else
+                        chan_off = dct_sel_base_off;
+        } else {
+                if ((hole_en & 1) && (sys_addr >= 0x100000000ULL))
+                        chan_off = hole_off << 16;
+                else
+                        chan_off = dram_base & 0xFFFFF8000000ULL;
+        }
+
+        return (sys_addr & 0x0000FFFFFFFFFFC0ULL) -
+                        (chan_off & 0x0000FFFFFF800000ULL);
+}
+
+/* Hack for the time being - Can we get this from BIOS?? */
+#define CH0SPARE_RANK   0
+#define CH1SPARE_RANK   1
+
+/*
+ * checks if the csrow passed in is marked as SPARED, if so returns the new
+ * spare row
+ */
+static inline int f10_process_possible_spare(int csrow,
+                                u32 cs, struct amd64_pvt *pvt)
+{
+        u32 swap_done;
+        u32 bad_dram_cs;
+
+        /* Depending on channel, isolate respective SPARING info */
+        if (cs) {
+                swap_done = F10_ONLINE_SPARE_SWAPDONE1(pvt->online_spare);
+                bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS1(pvt->online_spare);
+                if (swap_done && (csrow == bad_dram_cs))
+                        csrow = CH1SPARE_RANK;
+        } else {
+                swap_done = F10_ONLINE_SPARE_SWAPDONE0(pvt->online_spare);
+                bad_dram_cs = F10_ONLINE_SPARE_BADDRAM_CS0(pvt->online_spare);
+                if (swap_done && (csrow == bad_dram_cs))
+                        csrow = CH0SPARE_RANK;
+        }
+        return csrow;
+}
+
+/*
+ * Iterate over the DRAM DCT "base" and "mask" registers looking for a
+ * SystemAddr match on the specified 'ChannelSelect' and 'NodeID'
+ *
+ * Return:
+ *      -EINVAL:  NOT FOUND
+ *      0..csrow = Chip-Select Row
+ */
+static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
+{
+        struct mem_ctl_info *mci;
+        struct amd64_pvt *pvt;
+        u32 cs_base, cs_mask;
+        int cs_found = -EINVAL;
+        int csrow;
+
+        mci = mci_lookup[nid];
+        if (!mci)
+                return cs_found;
+
+        pvt = mci->pvt_info;
+
+        debugf1("InputAddr=0x%x  channelselect=%d\n", in_addr, cs);
+
+        for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+
+                cs_base = amd64_get_dct_base(pvt, cs, csrow);
+                if (!(cs_base & K8_DCSB_CS_ENABLE))
+                        continue;
+
+                /*
+                 * We have an ENABLED CSROW, Isolate just the MASK bits of the
+                 * target: [28:19] and [13:5], which map to [36:27] and [21:13]
+                 * of the actual address.
+                 */
+                cs_base &= REV_F_F1Xh_DCSB_BASE_BITS;
+
+                /*
+                 * Get the DCT Mask, and ENABLE the reserved bits: [18:16] and
+                 * [4:0] to become ON. Then mask off bits [28:0] ([36:8])
+                 */
+                cs_mask = amd64_get_dct_mask(pvt, cs, csrow);
+
+                debugf1("    CSROW=%d CSBase=0x%x RAW CSMask=0x%x\n",
+                                csrow, cs_base, cs_mask);
+
+                cs_mask = (cs_mask | 0x0007C01F) & 0x1FFFFFFF;
+
+                debugf1("              Final CSMask=0x%x\n", cs_mask);
+                debugf1("    (InputAddr & ~CSMask)=0x%x "
+                                "(CSBase & ~CSMask)=0x%x\n",
+                                (in_addr & ~cs_mask), (cs_base & ~cs_mask));
+
+                if ((in_addr & ~cs_mask) == (cs_base & ~cs_mask)) {
+                        cs_found = f10_process_possible_spare(csrow, cs, pvt);
+
+                        debugf1(" MATCH csrow=%d\n", cs_found);
+                        break;
+                }
+        }
+        return cs_found;
+}
+
+