cpufreq: davinci: move cpufreq driver to drivers/cpufreq

This patch moves cpufreq driver of ARM based davinci platform to
drivers/cpufreq.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

2 files changed, 232 insertions, 0 deletions

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c34094b5d8ea..c0e8921f91fc 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
 # LITTLE drivers, so that it is probed last.
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)         += arm_big_little_dt.o
 
+obj-$(CONFIG_ARCH_DAVINCI_DA850)        += davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)          += dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)        += exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)    += exynos4210-cpufreq.o
diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
new file mode 100644
index 000000000000..c33c76c360fa
--- /dev/null
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -0,0 +1,231 @@
+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/export.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+struct davinci_cpufreq {
+        struct device *dev;
+        struct clk *armclk;
+        struct clk *asyncclk;
+        unsigned long asyncrate;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_verify_speed(struct cpufreq_policy *policy)
+{
+        struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+        struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+        struct clk *armclk = cpufreq.armclk;
+
+        if (freq_table)
+                return cpufreq_frequency_table_verify(policy, freq_table);
+
+        if (policy->cpu)
+                return -EINVAL;
+
+        cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+                                     policy->cpuinfo.max_freq);
+
+        policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
+        policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
+        cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+                                                policy->cpuinfo.max_freq);
+        return 0;
+}
+
+static unsigned int davinci_getspeed(unsigned int cpu)
+{
+        if (cpu)
+                return 0;
+
+        return clk_get_rate(cpufreq.armclk) / 1000;
+}
+
+static int davinci_target(struct cpufreq_policy *policy,
+                                unsigned int target_freq, unsigned int relation)
+{
+        int ret = 0;
+        unsigned int idx;
+        struct cpufreq_freqs freqs;
+        struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+        struct clk *armclk = cpufreq.armclk;
+
+        freqs.old = davinci_getspeed(0);
+        freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
+
+        if (freqs.old == freqs.new)
+                return ret;
+
+        dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
+
+        ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
+                                                freqs.new, relation, &idx);
+        if (ret)
+                return -EINVAL;
+
+        cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+
+        /* if moving to higher frequency, up the voltage beforehand */
+        if (pdata->set_voltage && freqs.new > freqs.old) {
+                ret = pdata->set_voltage(idx);
+                if (ret)
+                        goto out;
+        }
+
+        ret = clk_set_rate(armclk, idx);
+        if (ret)
+                goto out;
+
+        if (cpufreq.asyncclk) {
+                ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
+                if (ret)
+                        goto out;
+        }
+
+        /* if moving to lower freq, lower the voltage after lowering freq */
+        if (pdata->set_voltage && freqs.new < freqs.old)
+                pdata->set_voltage(idx);
+
+out:
+        cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+
+        return ret;
+}
+
+static int davinci_cpu_init(struct cpufreq_policy *policy)
+{
+        int result = 0;
+        struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+        struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+        if (policy->cpu != 0)
+                return -EINVAL;
+
+        /* Finish platform specific initialization */
+        if (pdata->init) {
+                result = pdata->init();
+                if (result)
+                        return result;
+        }
+
+        policy->cur = davinci_getspeed(0);
+
+        result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+        if (result) {
+                pr_err("%s: cpufreq_frequency_table_cpuinfo() failed",
+                                __func__);
+                return result;
+        }
+
+        cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+
+        /*
+         * Time measurement across the target() function yields ~1500-1800us
+         * time taken with no drivers on notification list.
+         * Setting the latency to 2000 us to accommodate addition of drivers
+         * to pre/post change notification list.
+         */
+        policy->cpuinfo.transition_latency = 2000 * 1000;
+        return 0;
+}
+
+static int davinci_cpu_exit(struct cpufreq_policy *policy)
+{
+        cpufreq_frequency_table_put_attr(policy->cpu);
+        return 0;
+}
+
+static struct freq_attr *davinci_cpufreq_attr[] = {
+        &cpufreq_freq_attr_scaling_available_freqs,
+        NULL,
+};
+
+static struct cpufreq_driver davinci_driver = {
+        .flags          = CPUFREQ_STICKY,
+        .verify         = davinci_verify_speed,
+        .target         = davinci_target,
+        .get            = davinci_getspeed,
+        .init           = davinci_cpu_init,
+        .exit           = davinci_cpu_exit,
+        .name           = "davinci",
+        .attr           = davinci_cpufreq_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+        struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+        struct clk *asyncclk;
+
+        if (!pdata)
+                return -EINVAL;
+        if (!pdata->freq_table)
+                return -EINVAL;
+
+        cpufreq.dev = &pdev->dev;
+
+        cpufreq.armclk = clk_get(NULL, "arm");
+        if (IS_ERR(cpufreq.armclk)) {
+                dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+                return PTR_ERR(cpufreq.armclk);
+        }
+
+        asyncclk = clk_get(cpufreq.dev, "async");
+        if (!IS_ERR(asyncclk)) {
+                cpufreq.asyncclk = asyncclk;
+                cpufreq.asyncrate = clk_get_rate(asyncclk);
+        }
+
+        return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+        clk_put(cpufreq.armclk);
+
+        if (cpufreq.asyncclk)
+                clk_put(cpufreq.asyncclk);
+
+        return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+        .driver = {
+                .name    = "cpufreq-davinci",
+                .owner   = THIS_MODULE,
+        },
+        .remove = __exit_p(davinci_cpufreq_remove),
+};
+
+int __init davinci_cpufreq_init(void)
+{
+        return platform_driver_probe(&davinci_cpufreq_driver,
+                                                        davinci_cpufreq_probe);
+}
+