Merge branch 'linux-2.6'

3 files changed, 2 insertions, 579 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index a509b8d79781..ef1ed5d70125 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -543,28 +543,6 @@ config PPDEV
 
           If unsure, say N.
 
-config TIPAR
-        tristate "Texas Instruments parallel link cable support"
-        depends on PARPORT
-        ---help---
-          If you own a Texas Instruments graphing calculator and use a
-          parallel link cable, then you might be interested in this driver.
-
-          If you enable this driver, you will be able to communicate with
-          your calculator through a set of device nodes under /dev. The
-          main advantage of this driver is that you don't have to be root
-          to use this precise link cable (depending on the permissions on
-          the device nodes, though).
-
-          To compile this driver as a module, choose M here: the
-          module will be called tipar.
-
-          If you don't know what a parallel link cable is or what a Texas
-          Instruments graphing calculator is, then you probably don't need this
-          driver.
-
-          If unsure, say N.
-
 config HVC_DRIVER
         bool
         help
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index e686fc925168..8f45ca9235ad 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -669,6 +669,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file,
                 return 0;
 
         case WDIOC_SET_PRETIMEOUT:
+        case WDIOC_SETPRETIMEOUT:
                 i = copy_from_user(&val, argp, sizeof(int));
                 if (i)
                         return -EFAULT;
@@ -676,6 +677,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file,
                 return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY);
 
         case WDIOC_GET_PRETIMEOUT:
+        case WDIOC_GETPRETIMEOUT:
                 i = copy_to_user(argp, &pretimeout, sizeof(pretimeout));
                 if (i)
                         return -EFAULT;
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
deleted file mode 100644
index cef55c40654f..000000000000
--- a/drivers/char/tipar.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/* Hey EMACS -*- linux-c -*-
- *
- * tipar - low level driver for handling a parallel link cable designed
- * for Texas Instruments graphing calculators (http://lpg.ticalc.org).
- * A part of the TiLP project.
- *
- * Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
- * under the terms of the GNU General Public License.
- *
- * Various fixes & clean-up from the Linux Kernel Mailing List
- * (Alan Cox, Richard B. Johnson, Christoph Hellwig).
- */
-
-/* This driver should, in theory, work with any parallel port that has an
- * appropriate low-level driver; all I/O is done through the parport
- * abstraction layer.
- *
- * If this driver is built into the kernel, you can configure it using the
- * kernel command-line.  For example:
- *
- *      tipar=timeout,delay       (set timeout and delay)
- *
- * If the driver is loaded as a module, similar functionality is available
- * using module parameters.  The equivalent of the above commands would be:
- *
- *      # insmod tipar timeout=15 delay=10
- */
-
-/* COMPATIBILITY WITH OLD KERNELS
- *
- * Usually, parallel cables were bound to ports at
- * particular I/O addresses, as follows:
- *
- *      tipar0             0x378
- *      tipar1             0x278
- *      tipar2             0x3bc
- *
- *
- * This driver, by default, binds tipar devices according to parport and
- * the minor number.
- *
- */
-#undef DEBUG                            /* change to #define to get debugging
-                                         * output - for pr_debug() */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/fcntl.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/parport.h>              /* Our code depend on parport */
-#include <linux/device.h>
-
-/*
- * TI definitions
- */
-#include <linux/ticable.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "1.19"
-#define DRIVER_AUTHOR  "Romain Lievin <roms@lpg.ticalc.org>"
-#define DRIVER_DESC    "Device driver for TI/PC parallel link cables"
-#define DRIVER_LICENSE "GPL"
-
-#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
-
-/* ----- global variables --------------------------------------------- */
-
-struct tipar_struct {
-        struct pardevice *dev;  /* Parport device entry */
-};
-
-#define PP_NO 3
-static struct tipar_struct table[PP_NO];
-
-static int delay = IO_DELAY;    /* inter-bit delay in microseconds */
-static int timeout = TIMAXTIME; /* timeout in tenth of seconds     */
-
-static unsigned int tp_count;   /* tipar count */
-static unsigned long opened;    /* opened devices */
-
-static struct class *tipar_class;
-
-/* --- macros for parport access -------------------------------------- */
-
-#define r_dtr(x)        (parport_read_data(table[(x)].dev->port))
-#define r_str(x)        (parport_read_status(table[(x)].dev->port))
-#define w_ctr(x,y)      (parport_write_control(table[(x)].dev->port, (y)))
-#define w_dtr(x,y)      (parport_write_data(table[(x)].dev->port, (y)))
-
-/* --- setting states on the D-bus with the right timing: ------------- */
-
-static inline void
-outbyte(int value, int minor)
-{
-        w_dtr(minor, value);
-}
-
-static inline int
-inbyte(int minor)
-{
-        return (r_str(minor));
-}
-
-static inline void
-init_ti_parallel(int minor)
-{
-        outbyte(3, minor);
-}
-
-/* ----- global defines ----------------------------------------------- */
-
-#define START(x) { x = jiffies + (HZ * timeout) / 10; }
-#define WAIT(x)  { \
-  if (time_before((x), jiffies)) return -1; \
-  if (need_resched()) schedule(); }
-
-/* ----- D-bus bit-banging functions ---------------------------------- */
-
-/* D-bus protocol (45kbit/s max):
-                    1                 0                      0
-       _______        ______|______    __________|________    __________
-Red  :        ________      |      ____          |        ____
-       _        ____________|________      ______|__________       _____
-White:  ________            |        ______      |          _______
-*/
-
-/* Try to transmit a byte on the specified port (-1 if error). */
-static int
-put_ti_parallel(int minor, unsigned char data)
-{
-        unsigned int bit;
-        unsigned long max;
-
-        for (bit = 0; bit < 8; bit++) {
-                if (data & 1) {
-                        outbyte(2, minor);
-                        START(max);
-                        do {
-                                WAIT(max);
-                        } while (inbyte(minor) & 0x10);
-
-                        outbyte(3, minor);
-                        START(max);
-                        do {
-                                WAIT(max);
-                        } while (!(inbyte(minor) & 0x10));
-                } else {
-                        outbyte(1, minor);
-                        START(max);
-                        do {
-                                WAIT(max);
-                        } while (inbyte(minor) & 0x20);
-
-                        outbyte(3, minor);
-                        START(max);
-                        do {
-                                WAIT(max);
-                        } while (!(inbyte(minor) & 0x20));
-                }
-
-                data >>= 1;
-                udelay(delay);
-
-                if (need_resched())
-                        schedule();
-        }
-
-        return 0;
-}
-
-/* Receive a byte on the specified port or -1 if error. */
-static int
-get_ti_parallel(int minor)
-{
-        unsigned int bit;
-        unsigned char v, data = 0;
-        unsigned long max;
-
-        for (bit = 0; bit < 8; bit++) {
-                START(max);
-                do {
-                        WAIT(max);
-                } while ((v = inbyte(minor) & 0x30) == 0x30);
-
-                if (v == 0x10) {
-                        data = (data >> 1) | 0x80;
-                        outbyte(1, minor);
-                        START(max);
-                        do {
-                                WAIT(max);
-                        } while (!(inbyte(minor) & 0x20));
-                        outbyte(3, minor);
-                } else {
-                        data = data >> 1;
-                        outbyte(2, minor);
-                        START(max);
-                        do {
-                                WAIT(max);
-                        } while (!(inbyte(minor) & 0x10));
-                        outbyte(3, minor);
-                }
-
-                udelay(delay);
-                if (need_resched())
-                        schedule();
-        }
-
-        return (int) data;
-}
-
-/* Try to detect a parallel link cable on the specified port */
-static int
-probe_ti_parallel(int minor)
-{
-        int i;
-        int seq[] = { 0x00, 0x20, 0x10, 0x30 };
-        int data;
-
-        for (i = 3; i >= 0; i--) {
-                outbyte(3, minor);
-                outbyte(i, minor);
-                udelay(delay);
-                data = inbyte(minor) & 0x30;
-                pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i,
-                        data, seq[i]);
-                if (data != seq[i]) {
-                        outbyte(3, minor);
-                        return -1;
-                }
-        }
-
-        outbyte(3, minor);
-        return 0;
-}
-
-/* ----- kernel module functions--------------------------------------- */
-
-static int
-tipar_open(struct inode *inode, struct file *file)
-{
-        unsigned int minor = iminor(inode) - TIPAR_MINOR;
-
-        if (tp_count == 0 || minor > tp_count - 1)
-                return -ENXIO;
-
-        if (test_and_set_bit(minor, &opened))
-                return -EBUSY;
-
-        if (!table[minor].dev) {
-                printk(KERN_ERR "%s: NULL device for minor %u\n",
-                                __FUNCTION__, minor);
-                return -ENXIO;
-        }
-        parport_claim_or_block(table[minor].dev);
-        init_ti_parallel(minor);
-        parport_release(table[minor].dev);
-
-        return nonseekable_open(inode, file);
-}
-
-static int
-tipar_close(struct inode *inode, struct file *file)
-{
-        unsigned int minor = iminor(inode) - TIPAR_MINOR;
-
-        if (minor > tp_count - 1)
-                return -ENXIO;
-
-        clear_bit(minor, &opened);
-
-        return 0;
-}
-
-static ssize_t
-tipar_write (struct file *file, const char __user *buf, size_t count,
-                loff_t * ppos)
-{
-        unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
-        ssize_t n;
-
-        parport_claim_or_block(table[minor].dev);
-
-        for (n = 0; n < count; n++) {
-                unsigned char b;
-
-                if (get_user(b, buf + n)) {
-                        n = -EFAULT;
-                        goto out;
-                }
-
-                if (put_ti_parallel(minor, b) == -1) {
-                        init_ti_parallel(minor);
-                        n = -ETIMEDOUT;
-                        goto out;
-                }
-        }
-      out:
-        parport_release(table[minor].dev);
-        return n;
-}
-
-static ssize_t
-tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
-        int b = 0;
-        unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
-        ssize_t retval = 0;
-        ssize_t n = 0;
-
-        if (count == 0)
-                return 0;
-
-        parport_claim_or_block(table[minor].dev);
-
-        while (n < count) {
-                b = get_ti_parallel(minor);
-                if (b == -1) {
-                        init_ti_parallel(minor);
-                        retval = -ETIMEDOUT;
-                        goto out;
-                } else {
-                        if (put_user(b, buf + n)) {
-                                retval = -EFAULT;
-                                break;
-                        } else
-                                retval = ++n;
-                }
-
-                /* Non-blocking mode : try again ! */
-                if (file->f_flags & O_NONBLOCK) {
-                        retval = -EAGAIN;
-                        goto out;
-                }
-
-                /* Signal pending, try again ! */
-                if (signal_pending(current)) {
-                        retval = -ERESTARTSYS;
-                        goto out;
-                }
-
-                if (need_resched())
-                        schedule();
-        }
-
-      out:
-        parport_release(table[minor].dev);
-        return retval;
-}
-
-static int
-tipar_ioctl(struct inode *inode, struct file *file,
-            unsigned int cmd, unsigned long arg)
-{
-        int retval = 0;
-
-        switch (cmd) {
-        case IOCTL_TIPAR_DELAY:
-                delay = (int)arg;    //get_user(delay, &arg);
-                break;
-        case IOCTL_TIPAR_TIMEOUT:
-                if (arg != 0)
-                        timeout = (int)arg;
-                else
-                        retval = -EINVAL;
-          break;
-        default:
-                retval = -ENOTTY;
-                break;
-        }
-
-        return retval;
-}
-
-/* ----- kernel module registering ------------------------------------ */
-
-static const struct file_operations tipar_fops = {
-        .owner = THIS_MODULE,
-        .llseek = no_llseek,
-        .read = tipar_read,
-        .write = tipar_write,
-        .ioctl = tipar_ioctl,
-        .open = tipar_open,
-        .release = tipar_close,
-};
-
-/* --- initialisation code ------------------------------------- */
-
-#ifndef MODULE
-/*      You must set these - there is no sane way to probe for this cable.
- *      You can use 'tipar=timeout,delay' to set these now. */
-static int __init
-tipar_setup(char *str)
-{
-        int ints[3];
-
-        str = get_options(str, ARRAY_SIZE(ints), ints);
-
-        if (ints[0] > 0) {
-                if (ints[1] != 0)
-                        timeout = ints[1];
-                else
-                        printk(KERN_WARNING "tipar: bad timeout value (0), "
-                                "using default value instead");
-                if (ints[0] > 1) {
-                        delay = ints[2];
-                }
-        }
-
-        return 1;
-}
-#endif
-
-/*
- * Register our module into parport.
- * Pass also 2 callbacks functions to parport: a pre-emptive function and an
- * interrupt handler function (unused).
- * Display a message such "tipar0: using parport0 (polling)".
- */
-static int
-tipar_register(int nr, struct parport *port)
-{
-        int err = 0;
-
-        /* Register our module into parport */
-        table[nr].dev = parport_register_device(port, "tipar",
-                                                NULL, NULL, NULL, 0,
-                                                (void *) &table[nr]);
-
-        if (table[nr].dev == NULL) {
-                err = 1;
-                goto out;
-        }
-
-        device_create(tipar_class, port->dev, MKDEV(TIPAR_MAJOR,
-                        TIPAR_MINOR + nr), "par%d", nr);
-
-        /* Display informations */
-        pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
-                PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
-
-        if (probe_ti_parallel(nr) != -1)
-                pr_info("tipar%d: link cable found\n", nr);
-        else
-                pr_info("tipar%d: link cable not found\n", nr);
-
-        err = 0;
-
-out:
-        return err;
-}
-
-static void
-tipar_attach(struct parport *port)
-{
-        if (tp_count == PP_NO) {
-                pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO);
-                return;
-        }
-
-        if (!tipar_register(tp_count, port))
-                tp_count++;
-}
-
-static void
-tipar_detach(struct parport *port)
-{
-        /* Nothing to do */
-}
-
-static struct parport_driver tipar_driver = {
-        .name = "tipar",
-        .attach = tipar_attach,
-        .detach = tipar_detach,
-};
-
-static int __init
-tipar_init_module(void)
-{
-        int err = 0;
-
-        pr_info("tipar: parallel link cable driver, version %s\n",
-                DRIVER_VERSION);
-
-        if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
-                printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR);
-                err = -EIO;
-                goto out;
-        }
-
-        tipar_class = class_create(THIS_MODULE, "ticables");
-        if (IS_ERR(tipar_class)) {
-                err = PTR_ERR(tipar_class);
-                goto out_chrdev;
-        }
-        if (parport_register_driver(&tipar_driver)) {
-                printk(KERN_ERR "tipar: unable to register with parport\n");
-                err = -EIO;
-                goto out_class;
-        }
-
-        err = 0;
-        goto out;
-
-out_class:
-        class_destroy(tipar_class);
-
-out_chrdev:
-        unregister_chrdev(TIPAR_MAJOR, "tipar");
-out:
-        return err;     
-}
-
-static void __exit
-tipar_cleanup_module(void)
-{
-        unsigned int i;
-
-        /* Unregistering module */
-        parport_unregister_driver(&tipar_driver);
-
-        unregister_chrdev(TIPAR_MAJOR, "tipar");
-
-        for (i = 0; i < PP_NO; i++) {
-                if (table[i].dev == NULL)
-                        continue;
-                parport_unregister_device(table[i].dev);
-                device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i));
-        }
-        class_destroy(tipar_class);
-
-        pr_info("tipar: module unloaded\n");
-}
-
-/* --------------------------------------------------------------------- */
-
-__setup("tipar=", tipar_setup);
-module_init(tipar_init_module);
-module_exit(tipar_cleanup_module);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
-module_param(delay, int, 0);
-MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");