[PATCH] Char: isicom, remove isa code

ISA is not supported by this driver, remove parts, that take care of this.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 21 insertions, 70 deletions

diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index a56491eb8978..51fa317e695c 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -193,7 +193,6 @@ struct	isi_board {
         unsigned short          shift_count;
         struct isi_port         * ports;
         signed char             count;
-        unsigned char           isa;
         spinlock_t              card_lock; /* Card wide lock 11/5/00 -sameer */
         unsigned long           flags;
 };
@@ -562,14 +561,12 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
         base = card->base;
         spin_lock(&card->card_lock);
 
-        if (card->isa == NO) {
-                /*
-                 * disable any interrupts from the PCI card and lower the
-                 * interrupt line
-                 */
-                outw(0x8000, base+0x04);
-                ClearInterrupt(base);
-        }
+        /*
+         * disable any interrupts from the PCI card and lower the
+         * interrupt line
+         */
+        outw(0x8000, base+0x04);
+        ClearInterrupt(base);
 
         inw(base);              /* get the dummy word out */
         header = inw(base);
@@ -579,19 +576,13 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
         if (channel + 1 > card->port_count) {
                 printk(KERN_WARNING "ISICOM: isicom_interrupt(0x%lx): "
                         "%d(channel) > port_count.\n", base, channel+1);
-                if (card->isa)
-                        ClearInterrupt(base);
-                else
-                        outw(0x0000, base+0x04); /* enable interrupts */
+                outw(0x0000, base+0x04); /* enable interrupts */
                 spin_unlock(&card->card_lock);
                 return IRQ_HANDLED;
         }
         port = card->ports + channel;
         if (!(port->flags & ASYNC_INITIALIZED)) {
-                if (card->isa)
-                        ClearInterrupt(base);
-                else
-                        outw(0x0000, base+0x04); /* enable interrupts */
+                outw(0x0000, base+0x04); /* enable interrupts */
                 return IRQ_HANDLED;
         }
 
@@ -604,10 +595,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                 }
                 if (byte_count & 0x01)
                         inw(base);
-                if (card->isa == YES)
-                        ClearInterrupt(base);
-                else
-                        outw(0x0000, base+0x04); /* enable interrupts */
+                outw(0x0000, base+0x04); /* enable interrupts */
                 spin_unlock(&card->card_lock);
                 return IRQ_HANDLED;
         }
@@ -708,10 +696,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                 }
                 tty_flip_buffer_push(tty);
         }
-        if (card->isa == YES)
-                ClearInterrupt(base);
-        else
-                outw(0x0000, base+0x04); /* enable interrupts */
+        outw(0x0000, base+0x04); /* enable interrupts */
 
         return IRQ_HANDLED;
 }
@@ -1561,36 +1546,23 @@ static int __devinit reset_card(struct pci_dev *pdev,
 
         *signature = inw(base + 0x4) & 0xff;
 
-        if (board->isa == YES) {
-                if (!(inw(base + 0xe) & 0x1) || (inw(base + 0x2))) {
-                        dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
-                                inw(base + 0x2), inw(base + 0xe));
-                        dev_err(&pdev->dev, "ISILoad:ISA Card%d reset failure "
-                                "(Possible bad I/O Port Address 0x%lx).\n",
-                                card + 1, base);
-                        retval = -EIO;
-                        goto end;
-                }
-        } else {
-                portcount = inw(base + 0x2);
-                if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
-                                (portcount != 4) && (portcount != 8))) {
-                        dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
-                                inw(base + 0x2), inw(base + 0xe));
-                        dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
-                                "(Possible bad I/O Port Address 0x%lx).\n",
-                                card + 1, base);
-                        retval = -EIO;
-                        goto end;
-                }
+        portcount = inw(base + 0x2);
+        if (!(inw(base + 0xe) & 0x1) || ((portcount != 0) &&
+                        (portcount != 4) && (portcount != 8))) {
+                dev_dbg(&pdev->dev, "base+0x2=0x%lx, base+0xe=0x%lx\n",
+                        inw(base + 0x2), inw(base + 0xe));
+                dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure "
+                        "(Possible bad I/O Port Address 0x%lx).\n",
+                        card + 1, base);
+                retval = -EIO;
+                goto end;
         }
 
         switch (*signature) {
         case 0xa5:
         case 0xbb:
         case 0xdd:
-                board->port_count = (board->isa == NO && portcount == 4) ? 4 :
-                        8;
+                board->port_count = (portcount == 4) ? 4 : 8;
                 board->shift_count = 12;
                 break;
         case 0xcc:
@@ -1784,8 +1756,6 @@ end:
 /*
  *      Insmod can set static symbols so keep these static
  */
-static int io[4];
-static int irq[4];
 static int card;
 
 static int __devinit isicom_probe(struct pci_dev *pdev,
@@ -1813,7 +1783,6 @@ static int __devinit isicom_probe(struct pci_dev *pdev,
 
         board->base = ioaddr;
         board->irq = pciirq;
-        board->isa = NO;
         card++;
 
         pci_set_drvdata(pdev, board);
@@ -1888,20 +1857,6 @@ static int __init isicom_init(void)
                 }
                 isi_card[idx].base = 0;
                 isi_card[idx].irq = 0;
-
-                if (!io[idx])
-                        continue;
-
-                if (irq[idx] == 2 || irq[idx] == 3 || irq[idx] == 4     ||
-                                irq[idx] == 5   || irq[idx] == 7        ||
-                                irq[idx] == 10  || irq[idx] == 11       ||
-                                irq[idx] == 12  || irq[idx] == 15) {
-                        printk(KERN_ERR "ISICOM: ISA not supported yet.\n");
-                        retval = -EINVAL;
-                        goto error;
-                } else
-                        printk(KERN_ERR "ISICOM: Irq %d unsupported. "
-                                "Disabling Card%d...\n", irq[idx], idx + 1);
         }
 
         /* tty driver structure initialization */
@@ -1971,7 +1926,3 @@ module_exit(isicom_exit);
 MODULE_AUTHOR("MultiTech");
 MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech");
 MODULE_LICENSE("GPL");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for the cards");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for the cards");