Char: mxser, prints cleanup

- use dev_* for printing in pci probe function
- move ISA p[rints directly into isa find function, do not postpone it.
  Remove macros bound to it then.
- prepend some prints by "mxser: " to know what it belongs to

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 37 insertions, 43 deletions

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3d7f2a970495..57570f7db2be 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -55,11 +55,6 @@
 #define MXSER_PORTS             (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
 #define MXSER_ISR_PASS_LIMIT    100
 
-#define MXSER_ERR_IOADDR        -1
-#define MXSER_ERR_IRQ           -2
-#define MXSER_ERR_IRQ_CONFLIT   -3
-#define MXSER_ERR_VECTOR        -4
-
 /*CheckIsMoxaMust return value*/
 #define MOXA_OTHER_UART         0x00
 #define MOXA_MUST_MU150_HWID    0x01
@@ -2481,7 +2476,8 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
         unsigned int i;
         int retval;
 
-        printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud);
+        printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
+                        brd->ports[0].max_baud);
 
         for (i = 0; i < brd->info->nports; i++) {
                 info = &brd->ports[i];
@@ -2564,28 +2560,32 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
                 irq = regs[9] & 0xF000;
                 irq = irq | (irq >> 4);
                 if (irq != (regs[9] & 0xFF00))
-                        return MXSER_ERR_IRQ_CONFLIT;
+                        goto err_irqconflict;
         } else if (brd->info->nports == 4) {
                 irq = regs[9] & 0xF000;
                 irq = irq | (irq >> 4);
                 irq = irq | (irq >> 8);
                 if (irq != regs[9])
-                        return MXSER_ERR_IRQ_CONFLIT;
+                        goto err_irqconflict;
         } else if (brd->info->nports == 8) {
                 irq = regs[9] & 0xF000;
                 irq = irq | (irq >> 4);
                 irq = irq | (irq >> 8);
                 if ((irq != regs[9]) || (irq != regs[10]))
-                        return MXSER_ERR_IRQ_CONFLIT;
+                        goto err_irqconflict;
         }
 
-        if (!irq)
-                return MXSER_ERR_IRQ;
+        if (!irq) {
+                printk(KERN_ERR "mxser: interrupt number unset\n");
+                return -EIO;
+        }
         brd->irq = ((int)(irq & 0xF000) >> 12);
         for (i = 0; i < 8; i++)
                 brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
-        if ((regs[12] & 0x80) == 0)
-                return MXSER_ERR_VECTOR;
+        if ((regs[12] & 0x80) == 0) {
+                printk(KERN_ERR "mxser: invalid interrupt vector\n");
+                return -EIO;
+        }
         brd->vector = (int)regs[11];    /* interrupt vector */
         if (id == 1)
                 brd->vector_mask = 0x00FF;
@@ -2612,13 +2612,26 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
         else
                 brd->uart_type = PORT_16450;
         if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
-                        "mxser(IO)"))
-                return MXSER_ERR_IOADDR;
+                        "mxser(IO)")) {
+                printk(KERN_ERR "mxser: can't request ports I/O region: "
+                                "0x%.8lx-0x%.8lx\n",
+                                brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+                                8 * brd->info->nports - 1);
+                return -EIO;
+        }
         if (!request_region(brd->vector, 1, "mxser(vector)")) {
                 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-                return MXSER_ERR_VECTOR;
+                printk(KERN_ERR "mxser: can't request interrupt vector region: "
+                                "0x%.8lx-0x%.8lx\n",
+                                brd->ports[0].ioaddr, brd->ports[0].ioaddr +
+                                8 * brd->info->nports - 1);
+                return -EIO;
         }
         return brd->info->nports;
+
+err_irqconflict:
+        printk(KERN_ERR "mxser: invalid interrupt number\n");
+        return -EIO;
 }
 
 static int __devinit mxser_probe(struct pci_dev *pdev,
@@ -2635,20 +2648,20 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
                         break;
 
         if (i >= MXSER_BOARDS) {
-                printk(KERN_ERR "Too many Smartio/Industio family boards found "
-                        "(maximum %d), board not configured\n", MXSER_BOARDS);
+                dev_err(&pdev->dev, "too many boards found (maximum %d), board "
+                                "not configured\n", MXSER_BOARDS);
                 goto err;
         }
 
         brd = &mxser_boards[i];
         brd->idx = i * MXSER_PORTS_PER_BOARD;
-        printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n",
+        dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
                 mxser_cards[ent->driver_data].name,
                 pdev->bus->number, PCI_SLOT(pdev->devfn));
 
         retval = pci_enable_device(pdev);
         if (retval) {
-                printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+                dev_err(&pdev->dev, "PCI enable failed\n");
                 goto err;
         }
 
@@ -2798,33 +2811,14 @@ static int __init mxser_module_init(void)
 
                         brd = &mxser_boards[m];
                         retval = mxser_get_ISA_conf(cap, brd);
-
-                        if (retval != 0)
-                                printk(KERN_INFO "Found MOXA %s board "
-                                        "(CAP=0x%x)\n",
-                                        brd->info->name, ioaddr[b]);
-
                         if (retval <= 0) {
-                                if (retval == MXSER_ERR_IRQ)
-                                        printk(KERN_ERR "Invalid interrupt "
-                                                "number, board not "
-                                                "configured\n");
-                                else if (retval == MXSER_ERR_IRQ_CONFLIT)
-                                        printk(KERN_ERR "Invalid interrupt "
-                                                "number, board not "
-                                                "configured\n");
-                                else if (retval == MXSER_ERR_VECTOR)
-                                        printk(KERN_ERR "Invalid interrupt "
-                                                "vector, board not "
-                                                "configured\n");
-                                else if (retval == MXSER_ERR_IOADDR)
-                                        printk(KERN_ERR "Invalid I/O address, "
-                                                "board not configured\n");
-
                                 brd->info = NULL;
                                 continue;
                         }
 
+                        printk(KERN_INFO "mxser: found MOXA %s board "
+                                "(CAP=0x%x)\n", brd->info->name, ioaddr[b]);
+
                         /* mxser_initbrd will hook ISR. */
                         if (mxser_initbrd(brd, NULL) < 0) {
                                 brd->info = NULL;
@@ -2841,7 +2835,7 @@ static int __init mxser_module_init(void)
 
         retval = pci_register_driver(&mxser_driver);
         if (retval) {
-                printk(KERN_ERR "Can't register pci driver\n");
+                printk(KERN_ERR "mxser: can't register pci driver\n");
                 if (!m) {
                         retval = -ENODEV;
                         goto err_unr;