Merge branch 'merge'

1 files changed, 4 insertions, 4 deletions

diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index d53f664a4dd8..fff89c2d88fd 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -45,7 +45,7 @@ config WATCHDOG_NOWAYOUT
 comment "Watchdog Device Drivers"
         depends on WATCHDOG
 
-# Architecture Independant
+# Architecture Independent
 
 config SOFT_WATCHDOG
         tristate "Software watchdog"
@@ -127,7 +127,7 @@ config S3C2410_WATCHDOG
           enabled.
 
           The driver is limited by the speed of the system's PCLK
-          signal, so with reasonbaly fast systems (PCLK around 50-66MHz)
+          signal, so with reasonably fast systems (PCLK around 50-66MHz)
           then watchdog intervals of over approximately 20seconds are
           unavailable.
 
@@ -423,7 +423,7 @@ config SBC_EPX_C3_WATCHDOG
           is no way to know if writing to its IO address will corrupt
           your system or have any real effect.  The only way to be sure
           that this driver does what you want is to make sure you
-          are runnning it on an EPX-C3 from Winsystems with the watchdog
+          are running it on an EPX-C3 from Winsystems with the watchdog
           timer at IO address 0x1ee and 0x1ef.  It will write to both those
           IO ports.  Basically, the assumption is made that if you compile
           this driver into your kernel and/or load it as a module, that you
@@ -472,7 +472,7 @@ config INDYDOG
         tristate "Indy/I2 Hardware Watchdog"
         depends on WATCHDOG && SGI_IP22
         help
-          Hardwaredriver for the Indy's/I2's watchdog. This is a
+          Hardware driver for the Indy's/I2's watchdog. This is a
           watchdog timer that will reboot the machine after a 60 second
           timer expired and no process has written to /dev/watchdog during
           that time.