Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 161 insertions, 0 deletions

diff --git a/drivers/char/rio/riospace.h b/drivers/char/rio/riospace.h
new file mode 100644
index 000000000000..32b09b0f23aa
--- /dev/null
+++ b/drivers/char/rio/riospace.h
@@ -0,0 +1,161 @@
+/*
+** -----------------------------------------------------------------------------
+**
+**  Perle Specialix driver for Linux
+**  Ported from existing RIO Driver for SCO sources.
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**      Module          : riospace.h
+**      SID             : 1.2
+**      Last Modified   : 11/6/98 11:34:13
+**      Retrieved       : 11/6/98 11:34:22
+**
+**  ident @(#)riospace.h        1.2
+**
+** -----------------------------------------------------------------------------
+*/
+
+#ifndef __rio_riospace_h__
+#define __rio_riospace_h__
+
+#ifdef SCCS_LABELS
+static char *_riospace_h_sccs_ = "@(#)riospace.h        1.2";
+#endif
+
+#define RIO_LOCATOR_LEN 16
+#define MAX_RIO_BOARDS  4
+
+/*
+** DONT change this file. At all. Unless you can rebuild the entire
+** device driver, which you probably can't, then the rest of the
+** driver won't see any changes you make here. So don't make any.
+** In particular, it won't be able to see changes to RIO_SLOTS
+*/
+
+struct Conf
+{
+        char         Locator[24];
+        unsigned int StartupTime;
+        unsigned int SlowCook;
+        unsigned int IntrPollTime;
+        unsigned int BreakInterval;
+        unsigned int Timer;
+        unsigned int RtaLoadBase;
+        unsigned int HostLoadBase;
+        unsigned int XpHz;
+        unsigned int XpCps;
+        char         *XpOn;
+        char         *XpOff;
+        unsigned int MaxXpCps;
+        unsigned int MinXpCps;
+        unsigned int SpinCmds;
+        unsigned int FirstAddr;
+        unsigned int LastAddr;
+        unsigned int BufferSize;
+        unsigned int LowWater;
+        unsigned int LineLength;
+        unsigned int CmdTime;
+};
+
+/*
+**      Board types - these MUST correspond to product codes!
+*/ 
+#define RIO_EMPTY       0x0
+#define RIO_EISA        0x3
+#define RIO_RTA_16      0x9
+#define RIO_AT          0xA
+#define RIO_MCA         0xB
+#define RIO_PCI         0xD
+#define RIO_RTA         0xE
+
+/*
+**      Board data structure. This is used for configuration info
+*/
+struct  Brd
+{
+    unsigned char Type; /* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */
+    unsigned char Ivec; /* POLLED or ivec number */
+    unsigned char Mode; /* Control stuff, see below */
+};
+
+struct  Board
+{
+    char       Locator[RIO_LOCATOR_LEN];
+    int        NumSlots;
+    struct Brd Boards[MAX_RIO_BOARDS];
+};
+
+#define BOOT_FROM_LINK          0x00
+#define BOOT_FROM_RAM           0x01
+#define EXTERNAL_BUS_OFF        0x00
+#define EXTERNAL_BUS_ON         0x02
+#define INTERRUPT_DISABLE       0x00
+#define INTERRUPT_ENABLE        0x04
+#define BYTE_OPERATION          0x00
+#define WORD_OPERATION          0x08
+#define POLLED                  INTERRUPT_DISABLE
+#define IRQ_15                  (0x00 | INTERRUPT_ENABLE)
+#define IRQ_12                  (0x10 | INTERRUPT_ENABLE)
+#define IRQ_11                  (0x20 | INTERRUPT_ENABLE)
+#define IRQ_9                   (0x30 | INTERRUPT_ENABLE)
+#define SLOW_LINKS              0x00
+#define FAST_LINKS              0x40
+#define SLOW_AT_BUS             0x00
+#define FAST_AT_BUS             0x80
+#define SLOW_PCI_TP             0x00
+#define FAST_PCI_TP             0x80
+/*
+**      Debug levels
+*/
+#define DBG_NONE        0x00000000
+
+#define DBG_INIT        0x00000001
+#define DBG_OPEN        0x00000002
+#define DBG_CLOSE       0x00000004
+#define DBG_IOCTL       0x00000008
+
+#define DBG_READ        0x00000010
+#define DBG_WRITE       0x00000020
+#define DBG_INTR        0x00000040
+#define DBG_PROC        0x00000080
+
+#define DBG_PARAM       0x00000100
+#define DBG_CMD         0x00000200
+#define DBG_XPRINT      0x00000400
+#define DBG_POLL        0x00000800
+
+#define DBG_DAEMON      0x00001000
+#define DBG_FAIL        0x00002000
+#define DBG_MODEM       0x00004000
+#define DBG_LIST        0x00008000
+
+#define DBG_ROUTE       0x00010000
+#define DBG_UTIL        0x00020000
+#define DBG_BOOT        0x00040000
+#define DBG_BUFFER      0x00080000
+
+#define DBG_MON         0x00100000
+#define DBG_SPECIAL     0x00200000
+#define DBG_VPIX        0x00400000
+#define DBG_FLUSH       0x00800000
+
+#define DBG_QENABLE     0x01000000
+
+#define DBG_ALWAYS      0x80000000
+
+#endif /* __rio_riospace_h__ */