[PATCH] rioboot: lindent

This is the result of indent -kr -i8 -bri0 -l255

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 704 insertions, 811 deletions

diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index 92df43552f15..9a96fc644e52 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -80,149 +80,141 @@ static char *_rioboot_c_sccs_ = "@(#)rioboot.c	1.3";
 #include "cmdblk.h"
 #include "route.h"
 
-static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP );
-
-static uchar
-RIOAtVec2Ctrl[] =
-{
-        /* 0 */  INTERRUPT_DISABLE,
-        /* 1 */  INTERRUPT_DISABLE,
-        /* 2 */  INTERRUPT_DISABLE,
-        /* 3 */  INTERRUPT_DISABLE,
-        /* 4 */  INTERRUPT_DISABLE,
-        /* 5 */  INTERRUPT_DISABLE,
-        /* 6 */  INTERRUPT_DISABLE,
-        /* 7 */  INTERRUPT_DISABLE,
-        /* 8 */  INTERRUPT_DISABLE,
-        /* 9 */  IRQ_9|INTERRUPT_ENABLE,
+static int RIOBootComplete(struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP);
+
+static uchar RIOAtVec2Ctrl[] = {
+        /* 0 */ INTERRUPT_DISABLE,
+        /* 1 */ INTERRUPT_DISABLE,
+        /* 2 */ INTERRUPT_DISABLE,
+        /* 3 */ INTERRUPT_DISABLE,
+        /* 4 */ INTERRUPT_DISABLE,
+        /* 5 */ INTERRUPT_DISABLE,
+        /* 6 */ INTERRUPT_DISABLE,
+        /* 7 */ INTERRUPT_DISABLE,
+        /* 8 */ INTERRUPT_DISABLE,
+        /* 9 */ IRQ_9 | INTERRUPT_ENABLE,
         /* 10 */ INTERRUPT_DISABLE,
-        /* 11 */ IRQ_11|INTERRUPT_ENABLE,
-        /* 12 */ IRQ_12|INTERRUPT_ENABLE,
+        /* 11 */ IRQ_11 | INTERRUPT_ENABLE,
+        /* 12 */ IRQ_12 | INTERRUPT_ENABLE,
         /* 13 */ INTERRUPT_DISABLE,
         /* 14 */ INTERRUPT_DISABLE,
-        /* 15 */ IRQ_15|INTERRUPT_ENABLE
+        /* 15 */ IRQ_15 | INTERRUPT_ENABLE
 };
 
 /*
 ** Load in the RTA boot code.
 */
-int
-RIOBootCodeRTA(p, rbp)
-struct rio_info *       p;
-struct DownLoad *       rbp; 
+int RIOBootCodeRTA(p, rbp)
+struct rio_info *p;
+struct DownLoad *rbp;
 {
         int offset;
 
-        func_enter ();
+        func_enter();
 
         /* Linux doesn't allow you to disable interrupts during a
            "copyin". (Crash when a pagefault occurs). */
         /* disable(oldspl); */
-        
-        rio_dprintk (RIO_DEBUG_BOOT, "Data at user address 0x%x\n",(int)rbp->DataP);
+
+        rio_dprintk(RIO_DEBUG_BOOT, "Data at user address 0x%x\n", (int) rbp->DataP);
 
         /*
-        ** Check that we have set asside enough memory for this
-        */
-        if ( rbp->Count > SIXTY_FOUR_K ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
+         ** Check that we have set asside enough memory for this
+         */
+        if (rbp->Count > SIXTY_FOUR_K) {
+                rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
                 p->RIOError.Error = HOST_FILE_TOO_LARGE;
                 /* restore(oldspl); */
-                func_exit ();
+                func_exit();
                 return -ENOMEM;
         }
 
-        if ( p->RIOBooting ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n");
+        if (p->RIOBooting) {
+                rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n");
                 p->RIOError.Error = BOOT_IN_PROGRESS;
                 /* restore(oldspl); */
-                func_exit ();
+                func_exit();
                 return -EBUSY;
         }
 
         /*
-        ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary,
-        ** so calculate how far we have to move the data up the buffer
-        ** to achieve this.
-        */
-        offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % 
-                                                        RTA_BOOT_DATA_SIZE;
+         ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary,
+         ** so calculate how far we have to move the data up the buffer
+         ** to achieve this.
+         */
+        offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % RTA_BOOT_DATA_SIZE;
 
         /*
-        ** Be clean, and clear the 'unused' portion of the boot buffer,
-        ** because it will (eventually) be part of the Rta run time environment
-        ** and so should be zeroed.
-        */
-        bzero( (caddr_t)p->RIOBootPackets, offset );
+         ** Be clean, and clear the 'unused' portion of the boot buffer,
+         ** because it will (eventually) be part of the Rta run time environment
+         ** and so should be zeroed.
+         */
+        bzero((caddr_t) p->RIOBootPackets, offset);
 
         /*
-        ** Copy the data from user space.
-        */
+         ** Copy the data from user space.
+         */
 
-        if ( copyin((int)rbp->DataP,((caddr_t)(p->RIOBootPackets))+offset,
-                                rbp->Count) ==COPYFAIL ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "Bad data copy from user space\n");
+        if (copyin((int) rbp->DataP, ((caddr_t) (p->RIOBootPackets)) + offset, rbp->Count) == COPYFAIL) {
+                rio_dprintk(RIO_DEBUG_BOOT, "Bad data copy from user space\n");
                 p->RIOError.Error = COPYIN_FAILED;
                 /* restore(oldspl); */
-                func_exit ();
+                func_exit();
                 return -EFAULT;
         }
 
         /*
-        ** Make sure that our copy of the size includes that offset we discussed
-        ** earlier.
-        */
-        p->RIONumBootPkts = (rbp->Count+offset)/RTA_BOOT_DATA_SIZE;
-        p->RIOBootCount   = rbp->Count;
+         ** Make sure that our copy of the size includes that offset we discussed
+         ** earlier.
+         */
+        p->RIONumBootPkts = (rbp->Count + offset) / RTA_BOOT_DATA_SIZE;
+        p->RIOBootCount = rbp->Count;
 
         /* restore(oldspl); */
         func_exit();
         return 0;
 }
 
-void rio_start_card_running (struct Host * HostP)
+void rio_start_card_running(struct Host *HostP)
 {
-        func_enter ();
+        func_enter();
 
-        switch ( HostP->Type ) {
+        switch (HostP->Type) {
         case RIO_AT:
-                rio_dprintk (RIO_DEBUG_BOOT, "Start ISA card running\n");
-                WBYTE(HostP->Control, 
-                      BOOT_FROM_RAM | EXTERNAL_BUS_ON
-                      | HostP->Mode
-                      | RIOAtVec2Ctrl[HostP->Ivec & 0xF] );
+                rio_dprintk(RIO_DEBUG_BOOT, "Start ISA card running\n");
+                WBYTE(HostP->Control, BOOT_FROM_RAM | EXTERNAL_BUS_ON | HostP->Mode | RIOAtVec2Ctrl[HostP->Ivec & 0xF]);
                 break;
-                
+
 #ifdef FUTURE_RELEASE
         case RIO_MCA:
-                                /*
-                                ** MCA handles IRQ vectors differently, so we don't write 
-                                ** them to this register.
-                                */
-                rio_dprintk (RIO_DEBUG_BOOT, "Start MCA card running\n");
+                /*
+                 ** MCA handles IRQ vectors differently, so we don't write
+                 ** them to this register.
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Start MCA card running\n");
                 WBYTE(HostP->Control, McaTpBootFromRam | McaTpBusEnable | HostP->Mode);
                 break;
 
         case RIO_EISA:
-                                /*
-                                ** EISA is totally different and expects OUTBZs to turn it on.
-                                */
-                rio_dprintk (RIO_DEBUG_BOOT, "Start EISA card running\n");
-                OUTBZ( HostP->Slot, EISA_CONTROL_PORT, HostP->Mode | RIOEisaVec2Ctrl[HostP->Ivec] | EISA_TP_RUN | EISA_TP_BUS_ENABLE | EISA_TP_BOOT_FROM_RAM );
+                /*
+                 ** EISA is totally different and expects OUTBZs to turn it on.
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Start EISA card running\n");
+                OUTBZ(HostP->Slot, EISA_CONTROL_PORT, HostP->Mode | RIOEisaVec2Ctrl[HostP->Ivec] | EISA_TP_RUN | EISA_TP_BUS_ENABLE | EISA_TP_BOOT_FROM_RAM);
                 break;
 #endif
 
         case RIO_PCI:
-                                /*
-                                ** PCI is much the same as MCA. Everything is once again memory
-                                ** mapped, so we are writing to memory registers instead of io
-                                ** ports.
-                                */
-                rio_dprintk (RIO_DEBUG_BOOT, "Start PCI card running\n");
+                /*
+                 ** PCI is much the same as MCA. Everything is once again memory
+                 ** mapped, so we are writing to memory registers instead of io
+                 ** ports.
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Start PCI card running\n");
                 WBYTE(HostP->Control, PCITpBootFromRam | PCITpBusEnable | HostP->Mode);
                 break;
         default:
-                rio_dprintk (RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type);
+                rio_dprintk(RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type);
                 break;
         }
 /* 
@@ -239,9 +231,8 @@ void rio_start_card_running (struct Host * HostP)
 ** Put your rubber pants on before messing with this code - even the magic
 ** numbers have trouble understanding what they are doing here.
 */
-int
-RIOBootCodeHOST(p, rbp)
-struct rio_info *       p;
+int RIOBootCodeHOST(p, rbp)
+struct rio_info *p;
 register struct DownLoad *rbp;
 {
         register struct Host *HostP;
@@ -254,355 +245,346 @@ register struct DownLoad *rbp;
         BYTE *DestP;
         int wait_count;
         ushort OldParmMap;
-        ushort offset;  /* It is very important that this is a ushort */
+        ushort offset;          /* It is very important that this is a ushort */
         /* uint byte; */
         caddr_t DownCode = NULL;
         unsigned long flags;
 
-        HostP = NULL; /* Assure the compiler we've initialized it */
-        for ( host=0; host<p->RIONumHosts; host++ ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "Attempt to boot host %d\n",host);
+        HostP = NULL;           /* Assure the compiler we've initialized it */
+        for (host = 0; host < p->RIONumHosts; host++) {
+                rio_dprintk(RIO_DEBUG_BOOT, "Attempt to boot host %d\n", host);
                 HostP = &p->RIOHosts[host];
-                
-                rio_dprintk (RIO_DEBUG_BOOT,  "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n",
-                    HostP->Type, HostP->Mode, HostP->Ivec);
 
+                rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec);
 
-                if ( (HostP->Flags & RUN_STATE) != RC_WAITING ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "%s %d already running\n","Host",host);
+
+                if ((HostP->Flags & RUN_STATE) != RC_WAITING) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "%s %d already running\n", "Host", host);
                         continue;
                 }
 
                 /*
-                ** Grab a 32 bit pointer to the card.
-                */
+                 ** Grab a 32 bit pointer to the card.
+                 */
                 Cad = HostP->Caddr;
 
                 /*
-                ** We are going to (try) and load in rbp->Count bytes.
-                ** The last byte will reside at p->RIOConf.HostLoadBase-1;
-                ** Therefore, we need to start copying at address
-                ** (caddr+p->RIOConf.HostLoadBase-rbp->Count)
-                */
-                StartP = (caddr_t)&Cad[p->RIOConf.HostLoadBase-rbp->Count];
-
-                rio_dprintk (RIO_DEBUG_BOOT, "kernel virtual address for host is 0x%x\n", (int)Cad );
-                rio_dprintk (RIO_DEBUG_BOOT, "kernel virtual address for download is 0x%x\n", (int)StartP);
-                rio_dprintk (RIO_DEBUG_BOOT, "host loadbase is 0x%x\n",p->RIOConf.HostLoadBase);
-                rio_dprintk (RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count);
-
-                if ( p->RIOConf.HostLoadBase < rbp->Count ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "Bin too large\n");
+                 ** We are going to (try) and load in rbp->Count bytes.
+                 ** The last byte will reside at p->RIOConf.HostLoadBase-1;
+                 ** Therefore, we need to start copying at address
+                 ** (caddr+p->RIOConf.HostLoadBase-rbp->Count)
+                 */
+                StartP = (caddr_t) & Cad[p->RIOConf.HostLoadBase - rbp->Count];
+
+                rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for host is 0x%x\n", (int) Cad);
+                rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for download is 0x%x\n", (int) StartP);
+                rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase);
+                rio_dprintk(RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count);
+
+                if (p->RIOConf.HostLoadBase < rbp->Count) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "Bin too large\n");
                         p->RIOError.Error = HOST_FILE_TOO_LARGE;
-                        func_exit ();
+                        func_exit();
                         return -EFBIG;
                 }
                 /*
-                ** Ensure that the host really is stopped.
-                ** Disable it's external bus & twang its reset line.
-                */
-                RIOHostReset( HostP->Type, (struct DpRam *)HostP->CardP, HostP->Slot );
+                 ** Ensure that the host really is stopped.
+                 ** Disable it's external bus & twang its reset line.
+                 */
+                RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
 
                 /*
-                ** Copy the data directly from user space to the SRAM.
-                ** This ain't going to be none too clever if the download
-                ** code is bigger than this segment.
-                */
-                rio_dprintk (RIO_DEBUG_BOOT, "Copy in code\n");
+                 ** Copy the data directly from user space to the SRAM.
+                 ** This ain't going to be none too clever if the download
+                 ** code is bigger than this segment.
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Copy in code\n");
 
                 /*
-                ** PCI hostcard can't cope with 32 bit accesses and so need to copy 
-                ** data to a local buffer, and then dripfeed the card.
-                */
-                if ( HostP->Type == RIO_PCI ) {
-                  /* int offset; */
+                 ** PCI hostcard can't cope with 32 bit accesses and so need to copy
+                 ** data to a local buffer, and then dripfeed the card.
+                 */
+                if (HostP->Type == RIO_PCI) {
+                        /* int offset; */
 
                         DownCode = sysbrk(rbp->Count);
-                        if ( !DownCode ) {
-                                rio_dprintk (RIO_DEBUG_BOOT, "No system memory available\n");
+                        if (!DownCode) {
+                                rio_dprintk(RIO_DEBUG_BOOT, "No system memory available\n");
                                 p->RIOError.Error = NOT_ENOUGH_CORE_FOR_PCI_COPY;
-                                func_exit ();
+                                func_exit();
                                 return -ENOMEM;
                         }
                         bzero(DownCode, rbp->Count);
 
-                        if ( copyin((int)rbp->DataP,DownCode,rbp->Count)==COPYFAIL ) {
-                                rio_dprintk (RIO_DEBUG_BOOT, "Bad copyin of host data\n");
-                                sysfree( DownCode, rbp->Count );
+                        if (copyin((int) rbp->DataP, DownCode, rbp->Count) == COPYFAIL) {
+                                rio_dprintk(RIO_DEBUG_BOOT, "Bad copyin of host data\n");
+                                sysfree(DownCode, rbp->Count);
                                 p->RIOError.Error = COPYIN_FAILED;
-                                func_exit ();
+                                func_exit();
                                 return -EFAULT;
                         }
 
-                        HostP->Copy( DownCode, StartP, rbp->Count );
+                        HostP->Copy(DownCode, StartP, rbp->Count);
 
-                        sysfree( DownCode, rbp->Count );
-                }
-                else if ( copyin((int)rbp->DataP,StartP,rbp->Count)==COPYFAIL ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "Bad copyin of host data\n");
+                        sysfree(DownCode, rbp->Count);
+                } else if (copyin((int) rbp->DataP, StartP, rbp->Count) == COPYFAIL) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "Bad copyin of host data\n");
                         p->RIOError.Error = COPYIN_FAILED;
-                        func_exit ();
+                        func_exit();
                         return -EFAULT;
                 }
 
-                rio_dprintk (RIO_DEBUG_BOOT, "Copy completed\n");
+                rio_dprintk(RIO_DEBUG_BOOT, "Copy completed\n");
 
                 /*
-                **                      S T O P !
-                **
-                ** Upto this point the code has been fairly rational, and possibly
-                ** even straight forward. What follows is a pile of crud that will
-                ** magically turn into six bytes of transputer assembler. Normally
-                ** you would expect an array or something, but, being me, I have
-                ** chosen [been told] to use a technique whereby the startup code
-                ** will be correct if we change the loadbase for the code. Which
-                ** brings us onto another issue - the loadbase is the *end* of the
-                ** code, not the start.
-                **
-                ** If I were you I wouldn't start from here.
-                */
+                 **                     S T O P !
+                 **
+                 ** Upto this point the code has been fairly rational, and possibly
+                 ** even straight forward. What follows is a pile of crud that will
+                 ** magically turn into six bytes of transputer assembler. Normally
+                 ** you would expect an array or something, but, being me, I have
+                 ** chosen [been told] to use a technique whereby the startup code
+                 ** will be correct if we change the loadbase for the code. Which
+                 ** brings us onto another issue - the loadbase is the *end* of the
+                 ** code, not the start.
+                 **
+                 ** If I were you I wouldn't start from here.
+                 */
 
                 /*
-                ** We now need to insert a short boot section into
-                ** the memory at the end of Sram2. This is normally (de)composed
-                ** of the last eight bytes of the download code. The
-                ** download has been assembled/compiled to expect to be
-                ** loaded from 0x7FFF downwards. We have loaded it
-                ** at some other address. The startup code goes into the small
-                ** ram window at Sram2, in the last 8 bytes, which are really
-                ** at addresses 0x7FF8-0x7FFF.
-                **
-                ** If the loadbase is, say, 0x7C00, then we need to branch to
-                ** address 0x7BFE to run the host.bin startup code. We assemble
-                ** this jump manually.
-                **
-                ** The two byte sequence 60 08 is loaded into memory at address
-                ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0,
-                ** which adds '0' to the .O register, complements .O, and then shifts
-                ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will
-                ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new
-                ** location. Now, the branch starts from the value of .PC (or .IP or
-                ** whatever the bloody register is called on this chip), and the .PC
-                ** will be pointing to the location AFTER the branch, in this case
-                ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8.
-                **
-                ** A long branch is coded at 0x7FF8. This consists of loading a four
-                ** byte offset into .O using nfix (as above) and pfix operators. The
-                ** pfix operates in exactly the same way as the nfix operator, but
-                ** without the complement operation. The offset, of course, must be
-                ** relative to the address of the byte AFTER the branch instruction,
-                ** which will be (urm) 0x7FFC, so, our final destination of the branch
-                ** (loadbase-2), has to be reached from here. Imagine that the loadbase
-                ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which
-                ** is the first byte of the initial two byte short local branch of the
-                ** download code).
-                **
-                ** To code a jump from 0x7FFC (which is where the branch will start
-                ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)=
-                ** 0x7BFE.
-                ** This will be coded as four bytes:
-                ** 60 2C 20 02
-                ** being nfix .O+0
-                **         pfix .O+C
-                **         pfix .O+0
-                **         jump .O+2
-                **
-                ** The nfix operator is used, so that the startup code will be
-                ** compatible with the whole Tp family. (lies, damn lies, it'll never
-                ** work in a month of Sundays).
-                **
-                ** The nfix nyble is the 1s complement of the nyble value you
-                ** want to load - in this case we wanted 'F' so we nfix loaded '0'.
-                */
+                 ** We now need to insert a short boot section into
+                 ** the memory at the end of Sram2. This is normally (de)composed
+                 ** of the last eight bytes of the download code. The
+                 ** download has been assembled/compiled to expect to be
+                 ** loaded from 0x7FFF downwards. We have loaded it
+                 ** at some other address. The startup code goes into the small
+                 ** ram window at Sram2, in the last 8 bytes, which are really
+                 ** at addresses 0x7FF8-0x7FFF.
+                 **
+                 ** If the loadbase is, say, 0x7C00, then we need to branch to
+                 ** address 0x7BFE to run the host.bin startup code. We assemble
+                 ** this jump manually.
+                 **
+                 ** The two byte sequence 60 08 is loaded into memory at address
+                 ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0,
+                 ** which adds '0' to the .O register, complements .O, and then shifts
+                 ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will
+                 ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new
+                 ** location. Now, the branch starts from the value of .PC (or .IP or
+                 ** whatever the bloody register is called on this chip), and the .PC
+                 ** will be pointing to the location AFTER the branch, in this case
+                 ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8.
+                 **
+                 ** A long branch is coded at 0x7FF8. This consists of loading a four
+                 ** byte offset into .O using nfix (as above) and pfix operators. The
+                 ** pfix operates in exactly the same way as the nfix operator, but
+                 ** without the complement operation. The offset, of course, must be
+                 ** relative to the address of the byte AFTER the branch instruction,
+                 ** which will be (urm) 0x7FFC, so, our final destination of the branch
+                 ** (loadbase-2), has to be reached from here. Imagine that the loadbase
+                 ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which
+                 ** is the first byte of the initial two byte short local branch of the
+                 ** download code).
+                 **
+                 ** To code a jump from 0x7FFC (which is where the branch will start
+                 ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)=
+                 ** 0x7BFE.
+                 ** This will be coded as four bytes:
+                 ** 60 2C 20 02
+                 ** being nfix .O+0
+                 **        pfix .O+C
+                 **        pfix .O+0
+                 **        jump .O+2
+                 **
+                 ** The nfix operator is used, so that the startup code will be
+                 ** compatible with the whole Tp family. (lies, damn lies, it'll never
+                 ** work in a month of Sundays).
+                 **
+                 ** The nfix nyble is the 1s complement of the nyble value you
+                 ** want to load - in this case we wanted 'F' so we nfix loaded '0'.
+                 */
 
 
                 /*
-                ** Dest points to the top 8 bytes of Sram2. The Tp jumps
-                ** to 0x7FFE at reset time, and starts executing. This is
-                ** a short branch to 0x7FF8, where a long branch is coded.
-                */
+                 ** Dest points to the top 8 bytes of Sram2. The Tp jumps
+                 ** to 0x7FFE at reset time, and starts executing. This is
+                 ** a short branch to 0x7FF8, where a long branch is coded.
+                 */
 
-                DestP = (BYTE *)&Cad[0x7FF8];   /* <<<---- READ THE ABOVE COMMENTS */
+                DestP = (BYTE *) & Cad[0x7FF8]; /* <<<---- READ THE ABOVE COMMENTS */
 
 #define NFIX(N) (0x60 | (N))    /* .O  = (~(.O + N))<<4 */
 #define PFIX(N) (0x20 | (N))    /* .O  =   (.O + N)<<4  */
-#define JUMP(N) (0x00 | (N))    /* .PC =   .PC + .O      */
+#define JUMP(N) (0x00 | (N))    /* .PC =   .PC + .O      */
 
                 /*
-                ** 0x7FFC is the address of the location following the last byte of
-                ** the four byte jump instruction.
-                ** READ THE ABOVE COMMENTS
-                **
-                ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about.
-                ** Memsize is 64K for this range of Tp, so offset is a short (unsigned,
-                ** cos I don't understand 2's complement).
-                */
-                offset = (p->RIOConf.HostLoadBase-2)-0x7FFC;
-                WBYTE( DestP[0] , NFIX(((ushort)(~offset) >> (ushort)12) & 0xF) );
-                WBYTE( DestP[1] , PFIX(( offset >> 8) & 0xF) );
-                WBYTE( DestP[2] , PFIX(( offset >> 4) & 0xF) );
-                WBYTE( DestP[3] , JUMP( offset & 0xF) );
-
-                WBYTE( DestP[6] , NFIX(0) );
-                WBYTE( DestP[7] , JUMP(8) );
-
-                rio_dprintk (RIO_DEBUG_BOOT, "host loadbase is 0x%x\n",p->RIOConf.HostLoadBase);
-                rio_dprintk (RIO_DEBUG_BOOT, "startup offset is 0x%x\n",offset);
+                 ** 0x7FFC is the address of the location following the last byte of
+                 ** the four byte jump instruction.
+                 ** READ THE ABOVE COMMENTS
+                 **
+                 ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about.
+                 ** Memsize is 64K for this range of Tp, so offset is a short (unsigned,
+                 ** cos I don't understand 2's complement).
+                 */
+                offset = (p->RIOConf.HostLoadBase - 2) - 0x7FFC;
+                WBYTE(DestP[0], NFIX(((ushort) (~offset) >> (ushort) 12) & 0xF));
+                WBYTE(DestP[1], PFIX((offset >> 8) & 0xF));
+                WBYTE(DestP[2], PFIX((offset >> 4) & 0xF));
+                WBYTE(DestP[3], JUMP(offset & 0xF));
+
+                WBYTE(DestP[6], NFIX(0));
+                WBYTE(DestP[7], JUMP(8));
+
+                rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase);
+                rio_dprintk(RIO_DEBUG_BOOT, "startup offset is 0x%x\n", offset);
 
                 /*
-                ** Flag what is going on
-                */
+                 ** Flag what is going on
+                 */
                 HostP->Flags &= ~RUN_STATE;
                 HostP->Flags |= RC_STARTUP;
 
                 /*
-                ** Grab a copy of the current ParmMap pointer, so we
-                ** can tell when it has changed.
-                */
+                 ** Grab a copy of the current ParmMap pointer, so we
+                 ** can tell when it has changed.
+                 */
                 OldParmMap = RWORD(HostP->__ParmMapR);
 
-                rio_dprintk (RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n",OldParmMap);
+                rio_dprintk(RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n", OldParmMap);
 
                 /*
-                ** And start it running (I hope).
-                ** As there is nothing dodgy or obscure about the
-                ** above code, this is guaranteed to work every time.
-                */
-                rio_dprintk (RIO_DEBUG_BOOT,  "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n",
-                    HostP->Type, HostP->Mode, HostP->Ivec);
+                 ** And start it running (I hope).
+                 ** As there is nothing dodgy or obscure about the
+                 ** above code, this is guaranteed to work every time.
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec);
 
                 rio_start_card_running(HostP);
 
-                rio_dprintk (RIO_DEBUG_BOOT, "Set control port\n");
+                rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n");
 
                 /*
-                ** Now, wait for upto five seconds for the Tp to setup the parmmap
-                ** pointer:
-                */
-                for ( wait_count=0; (wait_count<p->RIOConf.StartupTime)&&
-                        (RWORD(HostP->__ParmMapR)==OldParmMap); wait_count++ ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n",wait_count,RWORD(HostP->__ParmMapR));
+                 ** Now, wait for upto five seconds for the Tp to setup the parmmap
+                 ** pointer:
+                 */
+                for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (RWORD(HostP->__ParmMapR) == OldParmMap); wait_count++) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n", wait_count, RWORD(HostP->__ParmMapR));
                         delay(HostP, HUNDRED_MS);
 
                 }
 
                 /*
-                ** If the parmmap pointer is unchanged, then the host code
-                ** has crashed & burned in a really spectacular way
-                */
-                if ( RWORD(HostP->__ParmMapR) == OldParmMap ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "parmmap 0x%x\n", RWORD(HostP->__ParmMapR));
-                        rio_dprintk (RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n");
-
-#define HOST_DISABLE \
-                HostP->Flags &= ~RUN_STATE; \
-                HostP->Flags |= RC_STUFFED; \
-                RIOHostReset( HostP->Type, (struct DpRam *)HostP->CardP, HostP->Slot );\
-                continue
-
-                        HOST_DISABLE;
-                }
-
-                rio_dprintk (RIO_DEBUG_BOOT, "Running 0x%x\n", RWORD(HostP->__ParmMapR));
+                 ** If the parmmap pointer is unchanged, then the host code
+                 ** has crashed & burned in a really spectacular way
+                 */
+                if (RWORD(HostP->__ParmMapR) == OldParmMap) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "parmmap 0x%x\n", RWORD(HostP->__ParmMapR));
+                        rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n");
+                        HostP->Flags &= ~RUN_STATE;
+                        HostP->Flags |= RC_STUFFED;
+                        RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
+                continue}
+
+                rio_dprintk(RIO_DEBUG_BOOT, "Running 0x%x\n", RWORD(HostP->__ParmMapR));
 
                 /*
-                ** Well, the board thought it was OK, and setup its parmmap
-                ** pointer. For the time being, we will pretend that this
-                ** board is running, and check out what the error flag says.
-                */
+                 ** Well, the board thought it was OK, and setup its parmmap
+                 ** pointer. For the time being, we will pretend that this
+                 ** board is running, and check out what the error flag says.
+                 */
 
                 /*
-                ** Grab a 32 bit pointer to the parmmap structure
-                */
-                ParmMapP = (PARM_MAP *)RIO_PTR(Cad,RWORD(HostP->__ParmMapR));
-                rio_dprintk (RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int)ParmMapP);
-                ParmMapP = (PARM_MAP *)((unsigned long)Cad + 
-                                                (unsigned long)((RWORD((HostP->__ParmMapR))) & 0xFFFF)); 
-                rio_dprintk (RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int)ParmMapP);
+                 ** Grab a 32 bit pointer to the parmmap structure
+                 */
+                ParmMapP = (PARM_MAP *) RIO_PTR(Cad, RWORD(HostP->__ParmMapR));
+                rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int) ParmMapP);
+                ParmMapP = (PARM_MAP *) ((unsigned long) Cad + (unsigned long) ((RWORD((HostP->__ParmMapR))) & 0xFFFF));
+                rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %x\n", (int) ParmMapP);
 
                 /*
-                ** The links entry should be 0xFFFF; we set it up
-                ** with a mask to say how many PHBs to use, and 
-                ** which links to use.
-                */
-                if ( (RWORD(ParmMapP->links) & 0xFFFF) != 0xFFFF ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
-                        rio_dprintk (RIO_DEBUG_BOOT, "Links = 0x%x\n",RWORD(ParmMapP->links));
-                        HOST_DISABLE;
-                }
-
-                WWORD(ParmMapP->links , RIO_LINK_ENABLE);
+                 ** The links entry should be 0xFFFF; we set it up
+                 ** with a mask to say how many PHBs to use, and
+                 ** which links to use.
+                 */
+                if ((RWORD(ParmMapP->links) & 0xFFFF) != 0xFFFF) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
+                        rio_dprintk(RIO_DEBUG_BOOT, "Links = 0x%x\n", RWORD(ParmMapP->links));
+                        HostP->Flags &= ~RUN_STATE;
+                        HostP->Flags |= RC_STUFFED;
+                        RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
+                continue}
+
+                WWORD(ParmMapP->links, RIO_LINK_ENABLE);
 
                 /*
-                ** now wait for the card to set all the parmmap->XXX stuff
-                ** this is a wait of upto two seconds....
-                */
-                rio_dprintk (RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n",p->RIOConf.StartupTime);
+                 ** now wait for the card to set all the parmmap->XXX stuff
+                 ** this is a wait of upto two seconds....
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime);
                 HostP->timeout_id = 0;
-                for ( wait_count=0; (wait_count<p->RIOConf.StartupTime) && 
-                                                !RWORD(ParmMapP->init_done); wait_count++ ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "Waiting for init_done\n");
+                for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && !RWORD(ParmMapP->init_done); wait_count++) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "Waiting for init_done\n");
                         delay(HostP, HUNDRED_MS);
                 }
-                rio_dprintk (RIO_DEBUG_BOOT, "OK! init_done!\n");
+                rio_dprintk(RIO_DEBUG_BOOT, "OK! init_done!\n");
 
-                if (RWORD(ParmMapP->error) != E_NO_ERROR || 
-                                                        !RWORD(ParmMapP->init_done) ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
-                        rio_dprintk (RIO_DEBUG_BOOT, "Timedout waiting for init_done\n");
-                        HOST_DISABLE;
-                }
+                if (RWORD(ParmMapP->error) != E_NO_ERROR || !RWORD(ParmMapP->init_done)) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
+                        rio_dprintk(RIO_DEBUG_BOOT, "Timedout waiting for init_done\n");
+                        HostP->Flags &= ~RUN_STATE;
+                        HostP->Flags |= RC_STUFFED;
+                        RIOHostReset(HostP->Type, (struct DpRam *) HostP->CardP, HostP->Slot);
+                continue}
 
-                rio_dprintk (RIO_DEBUG_BOOT, "Got init_done\n");
+                rio_dprintk(RIO_DEBUG_BOOT, "Got init_done\n");
 
                 /*
-                ** It runs! It runs!
-                */
-                rio_dprintk (RIO_DEBUG_BOOT, "Host ID %x Running\n",HostP->UniqueNum);
+                 ** It runs! It runs!
+                 */
+                rio_dprintk(RIO_DEBUG_BOOT, "Host ID %x Running\n", HostP->UniqueNum);
 
                 /*
-                ** set the time period between interrupts.
-                */
-                WWORD(ParmMapP->timer, (short)p->RIOConf.Timer );
+                 ** set the time period between interrupts.
+                 */
+                WWORD(ParmMapP->timer, (short) p->RIOConf.Timer);
 
                 /*
-                ** Translate all the 16 bit pointers in the __ParmMapR into
-                ** 32 bit pointers for the driver.
-                */
-                HostP->ParmMapP  =      ParmMapP;
-                HostP->PhbP              =      (PHB*)RIO_PTR(Cad,RWORD(ParmMapP->phb_ptr));
-                HostP->RupP              =      (RUP*)RIO_PTR(Cad,RWORD(ParmMapP->rups));
-                HostP->PhbNumP    = (ushort*)RIO_PTR(Cad,RWORD(ParmMapP->phb_num_ptr));
-                HostP->LinkStrP  =      (LPB*)RIO_PTR(Cad,RWORD(ParmMapP->link_str_ptr));
+                 ** Translate all the 16 bit pointers in the __ParmMapR into
+                 ** 32 bit pointers for the driver.
+                 */
+                HostP->ParmMapP = ParmMapP;
+                HostP->PhbP = (PHB *) RIO_PTR(Cad, RWORD(ParmMapP->phb_ptr));
+                HostP->RupP = (RUP *) RIO_PTR(Cad, RWORD(ParmMapP->rups));
+                HostP->PhbNumP = (ushort *) RIO_PTR(Cad, RWORD(ParmMapP->phb_num_ptr));
+                HostP->LinkStrP = (LPB *) RIO_PTR(Cad, RWORD(ParmMapP->link_str_ptr));
 
                 /*
-                ** point the UnixRups at the real Rups
-                */
-                for ( RupN = 0; RupN<MAX_RUP; RupN++ ) {
-                        HostP->UnixRups[RupN].RupP              = &HostP->RupP[RupN];
-                        HostP->UnixRups[RupN].Id                  = RupN+1;
+                 ** point the UnixRups at the real Rups
+                 */
+                for (RupN = 0; RupN < MAX_RUP; RupN++) {
+                        HostP->UnixRups[RupN].RupP = &HostP->RupP[RupN];
+                        HostP->UnixRups[RupN].Id = RupN + 1;
                         HostP->UnixRups[RupN].BaseSysPort = NO_PORT;
                         spin_lock_init(&HostP->UnixRups[RupN].RupLock);
                 }
 
-                for ( RupN = 0; RupN<LINKS_PER_UNIT; RupN++ ) {
-                        HostP->UnixRups[RupN+MAX_RUP].RupP      = &HostP->LinkStrP[RupN].rup;
-                        HostP->UnixRups[RupN+MAX_RUP].Id  = 0;
-                        HostP->UnixRups[RupN+MAX_RUP].BaseSysPort = NO_PORT;
-                        spin_lock_init(&HostP->UnixRups[RupN+MAX_RUP].RupLock);
+                for (RupN = 0; RupN < LINKS_PER_UNIT; RupN++) {
+                        HostP->UnixRups[RupN + MAX_RUP].RupP = &HostP->LinkStrP[RupN].rup;
+                        HostP->UnixRups[RupN + MAX_RUP].Id = 0;
+                        HostP->UnixRups[RupN + MAX_RUP].BaseSysPort = NO_PORT;
+                        spin_lock_init(&HostP->UnixRups[RupN + MAX_RUP].RupLock);
                 }
 
                 /*
-                ** point the PortP->Phbs at the real Phbs
-                */
-                for ( PortN=p->RIOFirstPortsMapped; 
-                                PortN<p->RIOLastPortsMapped+PORTS_PER_RTA; PortN++ ) {
-                        if ( p->RIOPortp[PortN]->HostP == HostP ) {
+                 ** point the PortP->Phbs at the real Phbs
+                 */
+                for (PortN = p->RIOFirstPortsMapped; PortN < p->RIOLastPortsMapped + PORTS_PER_RTA; PortN++) {
+                        if (p->RIOPortp[PortN]->HostP == HostP) {
                                 struct Port *PortP = p->RIOPortp[PortN];
                                 struct PHB *PhbP;
                                 /* int oldspl; */
 
-                                if ( !PortP->Mapped )
+                                if (!PortP->Mapped)
                                         continue;
 
                                 PhbP = &HostP->PhbP[PortP->HostPort];
@@ -610,40 +592,40 @@ register struct DownLoad *rbp;
 
                                 PortP->PhbP = PhbP;
 
-                                PortP->TxAdd    = (WORD *)RIO_PTR(Cad,RWORD(PhbP->tx_add));
-                                PortP->TxStart  = (WORD *)RIO_PTR(Cad,RWORD(PhbP->tx_start));
-                                PortP->TxEnd    = (WORD *)RIO_PTR(Cad,RWORD(PhbP->tx_end));
-                                PortP->RxRemove = (WORD *)RIO_PTR(Cad,RWORD(PhbP->rx_remove));
-                                PortP->RxStart  = (WORD *)RIO_PTR(Cad,RWORD(PhbP->rx_start));
-                                PortP->RxEnd    = (WORD *)RIO_PTR(Cad,RWORD(PhbP->rx_end));
+                                PortP->TxAdd = (WORD *) RIO_PTR(Cad, RWORD(PhbP->tx_add));
+                                PortP->TxStart = (WORD *) RIO_PTR(Cad, RWORD(PhbP->tx_start));
+                                PortP->TxEnd = (WORD *) RIO_PTR(Cad, RWORD(PhbP->tx_end));
+                                PortP->RxRemove = (WORD *) RIO_PTR(Cad, RWORD(PhbP->rx_remove));
+                                PortP->RxStart = (WORD *) RIO_PTR(Cad, RWORD(PhbP->rx_start));
+                                PortP->RxEnd = (WORD *) RIO_PTR(Cad, RWORD(PhbP->rx_end));
 
                                 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
                                 /*
-                                ** point the UnixRup at the base SysPort
-                                */
-                                if ( !(PortN % PORTS_PER_RTA) )
+                                 ** point the UnixRup at the base SysPort
+                                 */
+                                if (!(PortN % PORTS_PER_RTA))
                                         HostP->UnixRups[PortP->RupNum].BaseSysPort = PortN;
                         }
                 }
 
-                rio_dprintk (RIO_DEBUG_BOOT, "Set the card running... \n");
+                rio_dprintk(RIO_DEBUG_BOOT, "Set the card running... \n");
                 /*
-                ** last thing - show the world that everything is in place
-                */
+                 ** last thing - show the world that everything is in place
+                 */
                 HostP->Flags &= ~RUN_STATE;
                 HostP->Flags |= RC_RUNNING;
         }
         /*
-        ** MPX always uses a poller. This is actually patched into the system
-        ** configuration and called directly from each clock tick.
-        **
-        */
+         ** MPX always uses a poller. This is actually patched into the system
+         ** configuration and called directly from each clock tick.
+         **
+         */
         p->RIOPolling = 1;
 
         p->RIOSystemUp++;
-        
-        rio_dprintk (RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec);
-        func_exit ();
+
+        rio_dprintk(RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec);
+        func_exit();
         return 0;
 }
 
@@ -653,23 +635,22 @@ register struct DownLoad *rbp;
 ** Boot an RTA. If we have successfully processed this boot, then
 ** return 1. If we havent, then return 0.
 */
-int
-RIOBootRup( p, Rup, HostP, PacketP)
-struct rio_info *       p;
+int RIOBootRup(p, Rup, HostP, PacketP)
+struct rio_info *p;
 uint Rup;
 struct Host *HostP;
-struct PKT *PacketP; 
+struct PKT *PacketP;
 {
-        struct PktCmd *PktCmdP = (struct PktCmd *)PacketP->data;
+        struct PktCmd *PktCmdP = (struct PktCmd *) PacketP->data;
         struct PktCmd_M *PktReplyP;
         struct CmdBlk *CmdBlkP;
         uint sequence;
 
         /*
-        ** If we haven't been told what to boot, we can't boot it.
-        */
-        if ( p->RIONumBootPkts == 0 ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "No RTA code to download yet\n");
+         ** If we haven't been told what to boot, we can't boot it.
+         */
+        if (p->RIONumBootPkts == 0) {
+                rio_dprintk(RIO_DEBUG_BOOT, "No RTA code to download yet\n");
                 return 0;
         }
 
@@ -677,117 +658,111 @@ struct PKT *PacketP;
         /* ShowPacket( DBG_BOOT, PacketP ); */
 
         /*
-        ** Special case of boot completed - if we get one of these then we
-        ** don't need a command block. For all other cases we do, so handle
-        ** this first and then get a command block, then handle every other
-        ** case, relinquishing the command block if disaster strikes!
-        */
-        if ( (RBYTE(PacketP->len) & PKT_CMD_BIT) && 
-                        (RBYTE(PktCmdP->Command)==BOOT_COMPLETED) )
-                return RIOBootComplete(p, HostP, Rup, PktCmdP );
+         ** Special case of boot completed - if we get one of these then we
+         ** don't need a command block. For all other cases we do, so handle
+         ** this first and then get a command block, then handle every other
+         ** case, relinquishing the command block if disaster strikes!
+         */
+        if ((RBYTE(PacketP->len) & PKT_CMD_BIT) && (RBYTE(PktCmdP->Command) == BOOT_COMPLETED))
+                return RIOBootComplete(p, HostP, Rup, PktCmdP);
 
         /*
-        ** try to unhook a command block from the command free list.
-        */
-        if ( !(CmdBlkP = RIOGetCmdBlk()) ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n");
+         ** try to unhook a command block from the command free list.
+         */
+        if (!(CmdBlkP = RIOGetCmdBlk())) {
+                rio_dprintk(RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n");
                 return 0;
         }
 
         /*
-        ** Fill in the default info on the command block
-        */
-        CmdBlkP->Packet.dest_unit = Rup < (ushort)MAX_RUP ? Rup : 0;
+         ** Fill in the default info on the command block
+         */
+        CmdBlkP->Packet.dest_unit = Rup < (ushort) MAX_RUP ? Rup : 0;
         CmdBlkP->Packet.dest_port = BOOT_RUP;
-        CmdBlkP->Packet.src_unit  = 0;
-        CmdBlkP->Packet.src_port  = BOOT_RUP;
+        CmdBlkP->Packet.src_unit = 0;
+        CmdBlkP->Packet.src_port = BOOT_RUP;
 
         CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL;
-        PktReplyP = (struct PktCmd_M *)CmdBlkP->Packet.data;
+        PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data;
 
         /*
-        ** process COMMANDS on the boot rup!
-        */
-        if ( RBYTE(PacketP->len) & PKT_CMD_BIT ) {
+         ** process COMMANDS on the boot rup!
+         */
+        if (RBYTE(PacketP->len) & PKT_CMD_BIT) {
                 /*
-                ** We only expect one type of command - a BOOT_REQUEST!
-                */
-                if ( RBYTE(PktCmdP->Command) != BOOT_REQUEST ) {
-                        rio_dprintk (RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %d\n", 
-                                                PktCmdP->Command,Rup,HostP-p->RIOHosts);
-                        ShowPacket( DBG_BOOT, PacketP );
-                        RIOFreeCmdBlk( CmdBlkP );
+                 ** We only expect one type of command - a BOOT_REQUEST!
+                 */
+                if (RBYTE(PktCmdP->Command) != BOOT_REQUEST) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %d\n", PktCmdP->Command, Rup, HostP - p->RIOHosts);
+                        ShowPacket(DBG_BOOT, PacketP);
+                        RIOFreeCmdBlk(CmdBlkP);
                         return 1;
                 }
 
                 /*
-                ** Build a Boot Sequence command block
-                **
-                ** 02.03.1999 ARG - ESIL 0820 fix
-                ** We no longer need to use "Boot Mode", we'll always allow
-                ** boot requests - the boot will not complete if the device
-                ** appears in the bindings table.
-                ** So, this conditional is not required ...
-                **
-                if (p->RIOBootMode == RC_BOOT_NONE)
-                        **
-                        ** If the system is in slave mode, and a boot request is
-                        ** received, set command to BOOT_ABORT so that the boot
-                        ** will not complete.
-                        **
-                        PktReplyP->Command                       = BOOT_ABORT;
-                else
-                **
-                ** We'll just (always) set the command field in packet reply
-                ** to allow an attempted boot sequence :
-                */
+                 ** Build a Boot Sequence command block
+                 **
+                 ** 02.03.1999 ARG - ESIL 0820 fix
+                 ** We no longer need to use "Boot Mode", we'll always allow
+                 ** boot requests - the boot will not complete if the device
+                 ** appears in the bindings table.
+                 ** So, this conditional is not required ...
+                 **
+                 if (p->RIOBootMode == RC_BOOT_NONE)
+                 **
+                 ** If the system is in slave mode, and a boot request is
+                 ** received, set command to BOOT_ABORT so that the boot
+                 ** will not complete.
+                 **
+                 PktReplyP->Command                      = BOOT_ABORT;
+                 else
+                 **
+                 ** We'll just (always) set the command field in packet reply
+                 ** to allow an attempted boot sequence :
+                 */
                 PktReplyP->Command = BOOT_SEQUENCE;
 
                 PktReplyP->BootSequence.NumPackets = p->RIONumBootPkts;
-                PktReplyP->BootSequence.LoadBase   = p->RIOConf.RtaLoadBase;
-                PktReplyP->BootSequence.CodeSize   = p->RIOBootCount;
+                PktReplyP->BootSequence.LoadBase = p->RIOConf.RtaLoadBase;
+                PktReplyP->BootSequence.CodeSize = p->RIOBootCount;
 
-                CmdBlkP->Packet.len                             = BOOT_SEQUENCE_LEN | PKT_CMD_BIT;
+                CmdBlkP->Packet.len = BOOT_SEQUENCE_LEN | PKT_CMD_BIT;
 
-                bcopy("BOOT",(void *)&CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN],4);
+                bcopy("BOOT", (void *) &CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN], 4);
 
-                rio_dprintk (RIO_DEBUG_BOOT, "Boot RTA on Host %d Rup %d - %d (0x%x) packets to 0x%x\n",
-                        HostP-p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, 
-                                                                p->RIOConf.RtaLoadBase);
+                rio_dprintk(RIO_DEBUG_BOOT, "Boot RTA on Host %d Rup %d - %d (0x%x) packets to 0x%x\n", HostP - p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, p->RIOConf.RtaLoadBase);
 
                 /*
-                ** If this host is in slave mode, send the RTA an invalid boot
-                ** sequence command block to force it to kill the boot. We wait
-                ** for half a second before sending this packet to prevent the RTA
-                ** attempting to boot too often. The master host should then grab
-                ** the RTA and make it its own.
-                */
+                 ** If this host is in slave mode, send the RTA an invalid boot
+                 ** sequence command block to force it to kill the boot. We wait
+                 ** for half a second before sending this packet to prevent the RTA
+                 ** attempting to boot too often. The master host should then grab
+                 ** the RTA and make it its own.
+                 */
                 p->RIOBooting++;
-                RIOQueueCmdBlk( HostP, Rup, CmdBlkP );
+                RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
                 return 1;
         }
 
         /*
-        ** It is a request for boot data.
-        */
+         ** It is a request for boot data.
+         */
         sequence = RWORD(PktCmdP->Sequence);
 
-        rio_dprintk (RIO_DEBUG_BOOT, "Boot block %d on Host %d Rup%d\n",sequence,HostP-p->RIOHosts,Rup);
+        rio_dprintk(RIO_DEBUG_BOOT, "Boot block %d on Host %d Rup%d\n", sequence, HostP - p->RIOHosts, Rup);
 
-        if ( sequence >= p->RIONumBootPkts ) {
-                rio_dprintk (RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, 
-                                        p->RIONumBootPkts);
-                ShowPacket( DBG_BOOT, PacketP );
+        if (sequence >= p->RIONumBootPkts) {
+                rio_dprintk(RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, p->RIONumBootPkts);
+                ShowPacket(DBG_BOOT, PacketP);
         }
 
         PktReplyP->Sequence = sequence;
 
-        bcopy( p->RIOBootPackets[ p->RIONumBootPkts - sequence - 1 ], 
-                                PktReplyP->BootData, RTA_BOOT_DATA_SIZE );
+        bcopy(p->RIOBootPackets[p->RIONumBootPkts - sequence - 1], PktReplyP->BootData, RTA_BOOT_DATA_SIZE);
 
         CmdBlkP->Packet.len = PKT_MAX_DATA_LEN;
-        ShowPacket( DBG_BOOT, &CmdBlkP->Packet );
-        RIOQueueCmdBlk( HostP, Rup, CmdBlkP );
+        ShowPacket(DBG_BOOT, &CmdBlkP->Packet);
+        RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
         return 1;
 }
 
@@ -797,422 +772,348 @@ struct PKT *PacketP;
 ** If booted by an RTA, HostP->Mapping[Rup].RtaUniqueNum is the booting RTA.
 ** RtaUniq is the booted RTA.
 */
-static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP )
+static int RIOBootComplete(struct rio_info *p, struct Host *HostP, uint Rup, struct PktCmd *PktCmdP)
 {
-        struct Map      *MapP = NULL;
-        struct Map      *MapP2 = NULL;
-        int     Flag;
-        int     found;
-        int     host, rta;
-        int     EmptySlot = -1;
-        int     entry, entry2;
-        char    *MyType, *MyName;
-        uint    MyLink;
-        ushort  RtaType;
-        uint    RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) +
-                          (RBYTE(PktCmdP->UniqNum[1]) << 8) +
-                          (RBYTE(PktCmdP->UniqNum[2]) << 16) +
-                          (RBYTE(PktCmdP->UniqNum[3]) << 24);
+        struct Map *MapP = NULL;
+        struct Map *MapP2 = NULL;
+        int Flag;
+        int found;
+        int host, rta;
+        int EmptySlot = -1;
+        int entry, entry2;
+        char *MyType, *MyName;
+        uint MyLink;
+        ushort RtaType;
+        uint RtaUniq = (RBYTE(PktCmdP->UniqNum[0])) + (RBYTE(PktCmdP->UniqNum[1]) << 8) + (RBYTE(PktCmdP->UniqNum[2]) << 16) + (RBYTE(PktCmdP->UniqNum[3]) << 24);
 
         /* Was RIOBooting-- . That's bad. If an RTA sends two of them, the
            driver will never think that the RTA has booted... -- REW */
         p->RIOBooting = 0;
 
-        rio_dprintk (RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting);
+        rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting);
 
         /*
-        ** Determine type of unit (16/8 port RTA).
-        */
+         ** Determine type of unit (16/8 port RTA).
+         */
         RtaType = GetUnitType(RtaUniq);
-        if ( Rup >= (ushort)MAX_RUP ) {
-            rio_dprintk (RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n",
-             HostP->Name, 8 * RtaType, RBYTE(PktCmdP->LinkNum)+'A');
+        if (Rup >= (ushort) MAX_RUP) {
+                rio_dprintk(RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n", HostP->Name, 8 * RtaType, RBYTE(PktCmdP->LinkNum) + 'A');
         } else {
-            rio_dprintk (RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n",
-             HostP->Mapping[Rup].Name, 8 * RtaType,
-             RBYTE(PktCmdP->LinkNum)+'A');
+                rio_dprintk(RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n", HostP->Mapping[Rup].Name, 8 * RtaType, RBYTE(PktCmdP->LinkNum) + 'A');
         }
 
-        rio_dprintk (RIO_DEBUG_BOOT, "UniqNum is 0x%x\n",RtaUniq);
+        rio_dprintk(RIO_DEBUG_BOOT, "UniqNum is 0x%x\n", RtaUniq);
 
-        if ( ( RtaUniq == 0x00000000 ) || ( RtaUniq == 0xffffffff ) )
-        {
-            rio_dprintk (RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n");
-            return TRUE;
+        if ((RtaUniq == 0x00000000) || (RtaUniq == 0xffffffff)) {
+                rio_dprintk(RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n");
+                return TRUE;
         }
 
         /*
-        ** If this RTA has just booted an RTA which doesn't belong to this
-        ** system, or the system is in slave mode, do not attempt to create
-        ** a new table entry for it.
-        */
-        if (!RIOBootOk(p, HostP, RtaUniq))
-        {
-            MyLink = RBYTE(PktCmdP->LinkNum);
-            if (Rup < (ushort) MAX_RUP)
-            {
-                /*
-                ** RtaUniq was clone booted (by this RTA). Instruct this RTA
-                ** to hold off further attempts to boot on this link for 30
-                ** seconds.
-                */
-                if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink))
-                {
-                    rio_dprintk (RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n",
-                     'A' + MyLink);
+         ** If this RTA has just booted an RTA which doesn't belong to this
+         ** system, or the system is in slave mode, do not attempt to create
+         ** a new table entry for it.
+         */
+        if (!RIOBootOk(p, HostP, RtaUniq)) {
+                MyLink = RBYTE(PktCmdP->LinkNum);
+                if (Rup < (ushort) MAX_RUP) {
+                        /*
+                         ** RtaUniq was clone booted (by this RTA). Instruct this RTA
+                         ** to hold off further attempts to boot on this link for 30
+                         ** seconds.
+                         */
+                        if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink)) {
+                                rio_dprintk(RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n", 'A' + MyLink);
+                        }
+                } else {
+                        /*
+                         ** RtaUniq was booted by this host. Set the booting link
+                         ** to hold off for 30 seconds to give another unit a
+                         ** chance to boot it.
+                         */
+                        WWORD(HostP->LinkStrP[MyLink].WaitNoBoot, 30);
                 }
-            }
-            else
-            {
-                /*
-                ** RtaUniq was booted by this host. Set the booting link
-                ** to hold off for 30 seconds to give another unit a
-                ** chance to boot it.
-                */
-                WWORD(HostP->LinkStrP[MyLink].WaitNoBoot, 30);
-            }
-            rio_dprintk (RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n",
-              RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum);
-            return TRUE;
+                rio_dprintk(RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n", RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum);
+                return TRUE;
         }
 
         /*
-        ** Check for a SLOT_IN_USE entry for this RTA attached to the
-        ** current host card in the driver table.
-        **
-        ** If it exists, make a note that we have booted it. Other parts of
-        ** the driver are interested in this information at a later date,
-        ** in particular when the booting RTA asks for an ID for this unit,
-        ** we must have set the BOOTED flag, and the NEWBOOT flag is used
-        ** to force an open on any ports that where previously open on this
-        ** unit.
-        */
-        for ( entry=0; entry<MAX_RUP; entry++ )
-        {
-            uint sysport;
-
-            if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && 
-               (HostP->Mapping[entry].RtaUniqueNum==RtaUniq))
-            {
-                HostP->Mapping[entry].Flags |= RTA_BOOTED|RTA_NEWBOOT;
+         ** Check for a SLOT_IN_USE entry for this RTA attached to the
+         ** current host card in the driver table.
+         **
+         ** If it exists, make a note that we have booted it. Other parts of
+         ** the driver are interested in this information at a later date,
+         ** in particular when the booting RTA asks for an ID for this unit,
+         ** we must have set the BOOTED flag, and the NEWBOOT flag is used
+         ** to force an open on any ports that where previously open on this
+         ** unit.
+         */
+        for (entry = 0; entry < MAX_RUP; entry++) {
+                uint sysport;
+
+                if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) {
+                        HostP->Mapping[entry].Flags |= RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-                RIO_SV_BROADCAST(HostP->svFlags[entry]);
+                        RIO_SV_BROADCAST(HostP->svFlags[entry]);
 #endif
-                if ( (sysport=HostP->Mapping[entry].SysPort) != NO_PORT )
-                {
-                   if ( sysport < p->RIOFirstPortsBooted )
-                        p->RIOFirstPortsBooted = sysport;
-                   if ( sysport > p->RIOLastPortsBooted )
-                        p->RIOLastPortsBooted = sysport;
-                   /*
-                   ** For a 16 port RTA, check the second bank of 8 ports
-                   */
-                   if (RtaType == TYPE_RTA16)
-                   {
-                        entry2 = HostP->Mapping[entry].ID2 - 1;
-                        HostP->Mapping[entry2].Flags |= RTA_BOOTED|RTA_NEWBOOT;
+                        if ((sysport = HostP->Mapping[entry].SysPort) != NO_PORT) {
+                                if (sysport < p->RIOFirstPortsBooted)
+                                        p->RIOFirstPortsBooted = sysport;
+                                if (sysport > p->RIOLastPortsBooted)
+                                        p->RIOLastPortsBooted = sysport;
+                                /*
+                                 ** For a 16 port RTA, check the second bank of 8 ports
+                                 */
+                                if (RtaType == TYPE_RTA16) {
+                                        entry2 = HostP->Mapping[entry].ID2 - 1;
+                                        HostP->Mapping[entry2].Flags |= RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-                        RIO_SV_BROADCAST(HostP->svFlags[entry2]);
+                                        RIO_SV_BROADCAST(HostP->svFlags[entry2]);
 #endif
-                        sysport = HostP->Mapping[entry2].SysPort;
-                        if ( sysport < p->RIOFirstPortsBooted )
-                            p->RIOFirstPortsBooted = sysport;
-                        if ( sysport > p->RIOLastPortsBooted )
-                            p->RIOLastPortsBooted = sysport;
-                   }
-                }
-                if (RtaType == TYPE_RTA16) {
-                   rio_dprintk (RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n",
-                    entry+1, entry2+1);
-                } else {
-                   rio_dprintk (RIO_DEBUG_BOOT, "RTA will be given ID %d\n",entry+1);
+                                        sysport = HostP->Mapping[entry2].SysPort;
+                                        if (sysport < p->RIOFirstPortsBooted)
+                                                p->RIOFirstPortsBooted = sysport;
+                                        if (sysport > p->RIOLastPortsBooted)
+                                                p->RIOLastPortsBooted = sysport;
+                                }
+                        }
+                        if (RtaType == TYPE_RTA16) {
+                                rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n", entry + 1, entry2 + 1);
+                        } else {
+                                rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given ID %d\n", entry + 1);
+                        }
+                        return TRUE;
                 }
-                return TRUE;
-            }
         }
 
-        rio_dprintk (RIO_DEBUG_BOOT, "RTA not configured for this host\n");
+        rio_dprintk(RIO_DEBUG_BOOT, "RTA not configured for this host\n");
 
-        if ( Rup >= (ushort)MAX_RUP )
-        {
-            /*
-            ** It was a host that did the booting
-            */
-            MyType = "Host";
-            MyName = HostP->Name;
-        }
-        else
-        {
-            /*
-            ** It was an RTA that did the booting
-            */
-            MyType = "RTA";
-            MyName = HostP->Mapping[Rup].Name;
+        if (Rup >= (ushort) MAX_RUP) {
+                /*
+                 ** It was a host that did the booting
+                 */
+                MyType = "Host";
+                MyName = HostP->Name;
+        } else {
+                /*
+                 ** It was an RTA that did the booting
+                 */
+                MyType = "RTA";
+                MyName = HostP->Mapping[Rup].Name;
         }
         MyLink = RBYTE(PktCmdP->LinkNum);
 
         /*
-        ** There is no SLOT_IN_USE entry for this RTA attached to the current
-        ** host card in the driver table.
-        **
-        ** Check for a SLOT_TENTATIVE entry for this RTA attached to the
-        ** current host card in the driver table.
-        **
-        ** If we find one, then we re-use that slot.
-        */
-        for ( entry=0; entry<MAX_RUP; entry++ )
-        {
-            if ( (HostP->Mapping[entry].Flags & SLOT_TENTATIVE) &&
-                 (HostP->Mapping[entry].RtaUniqueNum == RtaUniq) )
-            {
-                if (RtaType == TYPE_RTA16)
-                {
-                    entry2 = HostP->Mapping[entry].ID2 - 1;
-                    if ( (HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) &&
-                         (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq) )
-                        rio_dprintk (RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n",
-                         entry, entry2);
-                    else
-                        continue;
+         ** There is no SLOT_IN_USE entry for this RTA attached to the current
+         ** host card in the driver table.
+         **
+         ** Check for a SLOT_TENTATIVE entry for this RTA attached to the
+         ** current host card in the driver table.
+         **
+         ** If we find one, then we re-use that slot.
+         */
+        for (entry = 0; entry < MAX_RUP; entry++) {
+                if ((HostP->Mapping[entry].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) {
+                        if (RtaType == TYPE_RTA16) {
+                                entry2 = HostP->Mapping[entry].ID2 - 1;
+                                if ((HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq))
+                                        rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n", entry, entry2);
+                                else
+                                        continue;
+                        } else
+                                rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n", entry);
+                        if (!p->RIONoMessage)
+                                cprintf("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A');
+                        return TRUE;
                 }
-                else
-                        rio_dprintk (RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n",entry);
-                if (! p->RIONoMessage)
-                    cprintf("RTA connected to %s '%s' (%c) not configured.\n",MyType,MyName,MyLink+'A');
-                return TRUE;
-            }
         }
 
         /*
-        ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-        ** attached to the current host card in the driver table.
-        **
-        ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another
-        ** host for this RTA in the driver table.
-        **
-        ** For a SLOT_IN_USE entry on another host, we need to delete the RTA
-        ** entry from the other host and add it to this host (using some of
-        ** the functions from table.c which do this).
-        ** For a SLOT_TENTATIVE entry on another host, we must cope with the
-        ** following scenario:
-        **
-        ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry
-        **   in table)
-        ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE
-        **   entries)
-        ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE)
-        ** + Unplug RTA and plug back into host A.
-        ** + Configure RTA on host A. We now have the same RTA configured
-        **   with different ports on two different hosts.
-        */
-        rio_dprintk (RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq );
+         ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+         ** attached to the current host card in the driver table.
+         **
+         ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another
+         ** host for this RTA in the driver table.
+         **
+         ** For a SLOT_IN_USE entry on another host, we need to delete the RTA
+         ** entry from the other host and add it to this host (using some of
+         ** the functions from table.c which do this).
+         ** For a SLOT_TENTATIVE entry on another host, we must cope with the
+         ** following scenario:
+         **
+         ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry
+         **   in table)
+         ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE
+         **   entries)
+         ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE)
+         ** + Unplug RTA and plug back into host A.
+         ** + Configure RTA on host A. We now have the same RTA configured
+         **   with different ports on two different hosts.
+         */
+        rio_dprintk(RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq);
         found = 0;
-        Flag = 0; /* Convince the compiler this variable is initialized */
-        for ( host = 0; !found && (host < p->RIONumHosts); host++ )
-        {
-            for ( rta=0; rta<MAX_RUP; rta++ )
-            {
-                if ((p->RIOHosts[host].Mapping[rta].Flags &
-                 (SLOT_IN_USE | SLOT_TENTATIVE)) &&
-                 (p->RIOHosts[host].Mapping[rta].RtaUniqueNum==RtaUniq))
-                {
-                    Flag = p->RIOHosts[host].Mapping[rta].Flags;
-                    MapP = &p->RIOHosts[host].Mapping[rta];
-                    if (RtaType == TYPE_RTA16)
-                    {
-                        MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1];
-                        rio_dprintk (RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n",
-                         rta+1, MapP->ID2, p->RIOHosts[host].Name);
-                    }
-                    else
-                        rio_dprintk (RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n",
-                         rta+1, p->RIOHosts[host].Name);
-                    found = 1;
-                    break;
+        Flag = 0;               /* Convince the compiler this variable is initialized */
+        for (host = 0; !found && (host < p->RIONumHosts); host++) {
+                for (rta = 0; rta < MAX_RUP; rta++) {
+                        if ((p->RIOHosts[host].Mapping[rta].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (p->RIOHosts[host].Mapping[rta].RtaUniqueNum == RtaUniq)) {
+                                Flag = p->RIOHosts[host].Mapping[rta].Flags;
+                                MapP = &p->RIOHosts[host].Mapping[rta];
+                                if (RtaType == TYPE_RTA16) {
+                                        MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1];
+                                        rio_dprintk(RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n", rta + 1, MapP->ID2, p->RIOHosts[host].Name);
+                                } else
+                                        rio_dprintk(RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n", rta + 1, p->RIOHosts[host].Name);
+                                found = 1;
+                                break;
+                        }
                 }
-            }
         }
 
         /*
-        ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-        ** attached to the current host card in the driver table.
-        **
-        ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on
-        ** another host for this RTA in the driver table...
-        **
-        ** Check for a SLOT_IN_USE entry for this RTA in the config table.
-        */
-        if ( !MapP )
-        {
-            rio_dprintk (RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n",RtaUniq);
-            for ( rta=0; rta < TOTAL_MAP_ENTRIES; rta++ )
-            {
-                rio_dprintk (RIO_DEBUG_BOOT, "Check table entry %d (%x)",
-                      rta,
-                      p->RIOSavedTable[rta].RtaUniqueNum);
-
-                if ( (p->RIOSavedTable[rta].Flags & SLOT_IN_USE) &&
-                 (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq) )
-                {
-                    MapP = &p->RIOSavedTable[rta];
-                    Flag = p->RIOSavedTable[rta].Flags;
-                    if (RtaType == TYPE_RTA16)
-                    {
-                        for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES;
-                         entry2++)
-                        {
-                            if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq)
-                                break;
-                        }
-                        MapP2 = &p->RIOSavedTable[entry2];
-                        rio_dprintk (RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n",
-                              rta, entry2);
-                    }
-                    else
-                        rio_dprintk (RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta);
-                    break;
+         ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+         ** attached to the current host card in the driver table.
+         **
+         ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on
+         ** another host for this RTA in the driver table...
+         **
+         ** Check for a SLOT_IN_USE entry for this RTA in the config table.
+         */
+        if (!MapP) {
+                rio_dprintk(RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n", RtaUniq);
+                for (rta = 0; rta < TOTAL_MAP_ENTRIES; rta++) {
+                        rio_dprintk(RIO_DEBUG_BOOT, "Check table entry %d (%x)", rta, p->RIOSavedTable[rta].RtaUniqueNum);
+
+                        if ((p->RIOSavedTable[rta].Flags & SLOT_IN_USE) && (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq)) {
+                                MapP = &p->RIOSavedTable[rta];
+                                Flag = p->RIOSavedTable[rta].Flags;
+                                if (RtaType == TYPE_RTA16) {
+                                        for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES; entry2++) {
+                                                if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq)
+                                                        break;
+                                        }
+                                        MapP2 = &p->RIOSavedTable[entry2];
+                                        rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n", rta, entry2);
+                                } else
+                                        rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta);
+                                break;
+                        }
                 }
-            }
         }
 
         /*
-        ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-        ** attached to the current host card in the driver table.
-        **
-        ** We may have found a SLOT_IN_USE entry on another host for this
-        ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry
-        ** on another host for this RTA in the driver table.
-        **
-        ** Check the driver table for room to fit this newly discovered RTA.
-        ** RIOFindFreeID() first looks for free slots and if it does not
-        ** find any free slots it will then attempt to oust any
-        ** tentative entry in the table.
-        */
+         ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+         ** attached to the current host card in the driver table.
+         **
+         ** We may have found a SLOT_IN_USE entry on another host for this
+         ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry
+         ** on another host for this RTA in the driver table.
+         **
+         ** Check the driver table for room to fit this newly discovered RTA.
+         ** RIOFindFreeID() first looks for free slots and if it does not
+         ** find any free slots it will then attempt to oust any
+         ** tentative entry in the table.
+         */
         EmptySlot = 1;
-        if (RtaType == TYPE_RTA16)
-        {
-            if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0)
-            {
-                RIODefaultName(p, HostP, entry);
-                FillSlot(entry, entry2, RtaUniq, HostP);
-                EmptySlot = 0;
-            }
-        }
-        else
-        {
-            if (RIOFindFreeID(p, HostP, &entry, NULL) == 0)
-            {
-                RIODefaultName(p, HostP, entry);
-                FillSlot(entry, 0, RtaUniq, HostP);
-                EmptySlot = 0;
-            }
+        if (RtaType == TYPE_RTA16) {
+                if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0) {
+                        RIODefaultName(p, HostP, entry);
+                        FillSlot(entry, entry2, RtaUniq, HostP);
+                        EmptySlot = 0;
+                }
+        } else {
+                if (RIOFindFreeID(p, HostP, &entry, NULL) == 0) {
+                        RIODefaultName(p, HostP, entry);
+                        FillSlot(entry, 0, RtaUniq, HostP);
+                        EmptySlot = 0;
+                }
         }
 
         /*
-        ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
-        ** attached to the current host card in the driver table.
-        **
-        ** If we found a SLOT_IN_USE entry on another host for this
-        ** RTA in the config or driver table, and there are enough free
-        ** slots in the driver table, then we need to move it over and
-        ** delete it from the other host.
-        ** If we found a SLOT_TENTATIVE entry on another host for this
-        ** RTA in the driver table, just delete the other host entry.
-        */
-        if (EmptySlot == 0)
-        {
-            if ( MapP )
-            {
-                if (Flag & SLOT_IN_USE)
-                {
-                    rio_dprintk (RIO_DEBUG_BOOT, 
-    "This RTA configured on another host - move entry to current host (1)\n");
-                    HostP->Mapping[entry].SysPort = MapP->SysPort;
-                    CCOPY( MapP->Name, HostP->Mapping[entry].Name, MAX_NAME_LEN );
-                    HostP->Mapping[entry].Flags =
-                     SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT;
+         ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
+         ** attached to the current host card in the driver table.
+         **
+         ** If we found a SLOT_IN_USE entry on another host for this
+         ** RTA in the config or driver table, and there are enough free
+         ** slots in the driver table, then we need to move it over and
+         ** delete it from the other host.
+         ** If we found a SLOT_TENTATIVE entry on another host for this
+         ** RTA in the driver table, just delete the other host entry.
+         */
+        if (EmptySlot == 0) {
+                if (MapP) {
+                        if (Flag & SLOT_IN_USE) {
+                                rio_dprintk(RIO_DEBUG_BOOT, "This RTA configured on another host - move entry to current host (1)\n");
+                                HostP->Mapping[entry].SysPort = MapP->SysPort;
+                                CCOPY(MapP->Name, HostP->Mapping[entry].Name, MAX_NAME_LEN);
+                                HostP->Mapping[entry].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-                    RIO_SV_BROADCAST(HostP->svFlags[entry]);
+                                RIO_SV_BROADCAST(HostP->svFlags[entry]);
 #endif
-                    RIOReMapPorts( p, HostP, &HostP->Mapping[entry] );
-                    if ( HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted )
-                        p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort;
-                    if ( HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted )
-                        p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort;
-                    rio_dprintk (RIO_DEBUG_BOOT, "SysPort %d, Name %s\n",(int)MapP->SysPort,MapP->Name);
-                }
-                else
-                {
-                    rio_dprintk (RIO_DEBUG_BOOT, 
-   "This RTA has a tentative entry on another host - delete that entry (1)\n");
-                    HostP->Mapping[entry].Flags =
-                     SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT;
+                                RIOReMapPorts(p, HostP, &HostP->Mapping[entry]);
+                                if (HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted)
+                                        p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort;
+                                if (HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted)
+                                        p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort;
+                                rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) MapP->SysPort, MapP->Name);
+                        } else {
+                                rio_dprintk(RIO_DEBUG_BOOT, "This RTA has a tentative entry on another host - delete that entry (1)\n");
+                                HostP->Mapping[entry].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT;
 #ifdef NEED_TO_FIX
-                    RIO_SV_BROADCAST(HostP->svFlags[entry]);
+                                RIO_SV_BROADCAST(HostP->svFlags[entry]);
 #endif
-                }
-                if (RtaType == TYPE_RTA16)
-                {
-                    if (Flag & SLOT_IN_USE)
-                    {
-                        HostP->Mapping[entry2].Flags = SLOT_IN_USE |
-                         RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
+                        }
+                        if (RtaType == TYPE_RTA16) {
+                                if (Flag & SLOT_IN_USE) {
+                                        HostP->Mapping[entry2].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
 #ifdef NEED_TO_FIX
-                        RIO_SV_BROADCAST(HostP->svFlags[entry2]);
+                                        RIO_SV_BROADCAST(HostP->svFlags[entry2]);
 #endif
-                        HostP->Mapping[entry2].SysPort = MapP2->SysPort;
-                        /*
-                        ** Map second block of ttys for 16 port RTA
-                        */
-                        RIOReMapPorts( p, HostP, &HostP->Mapping[entry2] );
-                       if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted)
-                         p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort;
-                       if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted)
-                         p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort;
-                        rio_dprintk (RIO_DEBUG_BOOT, "SysPort %d, Name %s\n",
-                               (int)HostP->Mapping[entry2].SysPort,
-                               HostP->Mapping[entry].Name);
-                    }
-                    else
-                        HostP->Mapping[entry2].Flags = SLOT_TENTATIVE |
-                         RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
+                                        HostP->Mapping[entry2].SysPort = MapP2->SysPort;
+                                        /*
+                                         ** Map second block of ttys for 16 port RTA
+                                         */
+                                        RIOReMapPorts(p, HostP, &HostP->Mapping[entry2]);
+                                        if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted)
+                                                p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort;
+                                        if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted)
+                                                p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort;
+                                        rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) HostP->Mapping[entry2].SysPort, HostP->Mapping[entry].Name);
+                                } else
+                                        HostP->Mapping[entry2].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
 #ifdef NEED_TO_FIX
-                        RIO_SV_BROADCAST(HostP->svFlags[entry2]);
+                                RIO_SV_BROADCAST(HostP->svFlags[entry2]);
 #endif
-                    bzero( (caddr_t)MapP2, sizeof(struct Map) );
-                }
-                bzero( (caddr_t)MapP, sizeof(struct Map) );
-                if (! p->RIONoMessage)
-                    cprintf("An orphaned RTA has been adopted by %s '%s' (%c).\n",MyType,MyName,MyLink+'A');
-            }
-            else if (! p->RIONoMessage)
-                cprintf("RTA connected to %s '%s' (%c) not configured.\n",MyType,MyName,MyLink+'A');
-            RIOSetChange(p);
-            return TRUE;
+                                bzero((caddr_t) MapP2, sizeof(struct Map));
+                        }
+                        bzero((caddr_t) MapP, sizeof(struct Map));
+                        if (!p->RIONoMessage)
+                                cprintf("An orphaned RTA has been adopted by %s '%s' (%c).\n", MyType, MyName, MyLink + 'A');
+                } else if (!p->RIONoMessage)
+                        cprintf("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A');
+                RIOSetChange(p);
+                return TRUE;
         }
 
         /*
-        ** There is no room in the driver table to make an entry for the
-        ** booted RTA. Keep a note of its Uniq Num in the overflow table,
-        ** so we can ignore it's ID requests.
-        */
-        if (! p->RIONoMessage)
-            cprintf("The RTA connected to %s '%s' (%c) cannot be configured.  You cannot configure more than 128 ports to one host card.\n",MyType,MyName,MyLink+'A');
-        for ( entry=0; entry<HostP->NumExtraBooted; entry++ )
-        {
-            if ( HostP->ExtraUnits[entry] == RtaUniq )
-            {
-                /*
-                ** already got it!
-                */
-                return TRUE;
-            }
+         ** There is no room in the driver table to make an entry for the
+         ** booted RTA. Keep a note of its Uniq Num in the overflow table,
+         ** so we can ignore it's ID requests.
+         */
+        if (!p->RIONoMessage)
+                cprintf("The RTA connected to %s '%s' (%c) cannot be configured.  You cannot configure more than 128 ports to one host card.\n", MyType, MyName, MyLink + 'A');
+        for (entry = 0; entry < HostP->NumExtraBooted; entry++) {
+                if (HostP->ExtraUnits[entry] == RtaUniq) {
+                        /*
+                         ** already got it!
+                         */
+                        return TRUE;
+                }
         }
         /*
-        ** If there is room, add the unit to the list of extras
-        */
-        if ( HostP->NumExtraBooted < MAX_EXTRA_UNITS )
-            HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq;
+         ** If there is room, add the unit to the list of extras
+         */
+        if (HostP->NumExtraBooted < MAX_EXTRA_UNITS)
+                HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq;
         return TRUE;
 }
 
@@ -1226,25 +1127,20 @@ static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, st
 ** We no longer support the RIOBootMode variable. It is all done from the
 ** "boot/noboot" field in the rio.cf file.
 */
-int
-RIOBootOk(p, HostP, RtaUniq)
-struct rio_info *       p;
-struct Host *           HostP;
+int RIOBootOk(p, HostP, RtaUniq)
+struct rio_info *p;
+struct Host *HostP;
 ulong RtaUniq;
 {
-    int         Entry;
-    uint HostUniq = HostP->UniqueNum;
+        int Entry;
+        uint HostUniq = HostP->UniqueNum;
 
         /*
-        ** Search bindings table for RTA or its parent.
-        ** If it exists, return 0, else 1.
-        */
-        for (Entry = 0;
-            ( Entry < MAX_RTA_BINDINGS ) && ( p->RIOBindTab[Entry] != 0 );
-            Entry++)
-        {
-                if ( (p->RIOBindTab[Entry] == HostUniq) ||
-                     (p->RIOBindTab[Entry] == RtaUniq) )
+         ** Search bindings table for RTA or its parent.
+         ** If it exists, return 0, else 1.
+         */
+        for (Entry = 0; (Entry < MAX_RTA_BINDINGS) && (p->RIOBindTab[Entry] != 0); Entry++) {
+                if ((p->RIOBindTab[Entry] == HostUniq) || (p->RIOBindTab[Entry] == RtaUniq))
                         return 0;
         }
         return 1;
@@ -1255,16 +1151,15 @@ ulong RtaUniq;
 ** slots tentative, and the second one RTA_SECOND_SLOT as well.
 */
 
-void
-FillSlot(entry, entry2, RtaUniq, HostP)
+void FillSlot(entry, entry2, RtaUniq, HostP)
 int entry;
 int entry2;
 uint RtaUniq;
 struct Host *HostP;
 {
-        int             link;
+        int link;
 
-        rio_dprintk (RIO_DEBUG_BOOT, "FillSlot(%d, %d, 0x%x...)\n", entry, entry2, RtaUniq);
+        rio_dprintk(RIO_DEBUG_BOOT, "FillSlot(%d, %d, 0x%x...)\n", entry, entry2, RtaUniq);
 
         HostP->Mapping[entry].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE);
         HostP->Mapping[entry].SysPort = NO_PORT;
@@ -1273,8 +1168,7 @@ struct Host *HostP;
         HostP->Mapping[entry].ID = entry + 1;
         HostP->Mapping[entry].ID2 = 0;
         if (entry2) {
-                HostP->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | 
-                                                                SLOT_TENTATIVE | RTA16_SECOND_SLOT);
+                HostP->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE | RTA16_SECOND_SLOT);
                 HostP->Mapping[entry2].SysPort = NO_PORT;
                 HostP->Mapping[entry2].RtaUniqueNum = RtaUniq;
                 HostP->Mapping[entry2].HostUniqueNum = HostP->UniqueNum;
@@ -1284,10 +1178,10 @@ struct Host *HostP;
                 HostP->Mapping[entry].ID2 = entry2 + 1;
         }
         /*
-        ** Must set these up, so that utilities show
-        ** topology of 16 port RTAs correctly
-        */
-        for ( link=0; link<LINKS_PER_UNIT; link++ ) {
+         ** Must set these up, so that utilities show
+         ** topology of 16 port RTAs correctly
+         */
+        for (link = 0; link < LINKS_PER_UNIT; link++) {
                 HostP->Mapping[entry].Topology[link].Unit = ROUTE_DISCONNECT;
                 HostP->Mapping[entry].Topology[link].Link = NO_LINK;
                 if (entry2) {
@@ -1296,4 +1190,3 @@ struct Host *HostP;
                 }
         }
 }
-