[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 89 insertions, 89 deletions

diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index cf056a990f18..217ff09f2fa1 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -73,20 +73,20 @@
 #define TIMER_TICK      0x82
 #define STOP_BREAK      0x83
 #define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
-#define txack1  ((short *)0x7104) 
-#define rxack1  ((short *)0x7102) 
+#define txack1  ((short *)0x7104)
+#define rxack1  ((short *)0x7102)
 #define mdack1  ((short *)0x7106)
-#define txack2  ((short *)0x7006) 
-#define rxack2  ((short *)0x7004) 
-#define mdack2  ((short *)0x7100) 
+#define txack2  ((short *)0x7006)
+#define rxack2  ((short *)0x7004)
+#define mdack2  ((short *)0x7100)
 #define int_latch       ((short *) 0x7800)
-#define int_status      ((short *) 0x7c00) 
-#define tx1_pending     0x20 
-#define rx1_pending     0x10 
-#define md1_pending     0x40 
-#define tx2_pending     0x02 
-#define rx2_pending     0x01 
-#define md2_pending     0x40 
+#define int_status      ((short *) 0x7c00)
+#define tx1_pending     0x20
+#define rx1_pending     0x10
+#define md1_pending     0x40
+#define tx2_pending     0x02
+#define rx2_pending     0x01
+#define md2_pending     0x40
 #define module1_bits    0x07
 #define module1_modern  0x08
 #define module2_bits    0x70
@@ -113,65 +113,65 @@
    NB. These registers are relative values on 8 bit boundaries whereas
    on the RTA's the CIRRUS registers are on word boundaries. Use pointer
    arithmetic (short *) to obtain the real addresses required */
-#define ccr     0x05    /* Channel Command Register     */
-#define ier     0x06    /* Interrupt Enable Register    */
-#define cor1    0x08    /* Channel Option Register 1    */
-#define cor2    0x09    /* Channel Option Register 2    */
-#define cor3    0x0a    /* Channel Option Register 3    */
-#define cor4    0x1e    /* Channel Option Register 4    */
-#define cor5    0x1f    /* Channel Option Register 5    */
-
-#define ccsr    0x0b    /* Channel Control Status Register */
-#define rdcr    0x0e    /* Receive Data Count Register  */
-#define tdcr    0x12    /* Transmit Data Count Register */
-#define mcor1   0x15    /* Modem Change Option Register 1 */
-#define mcor2   0x16    /* Modem Change Option Regsiter 2 */
-
-#define livr    0x18    /* Local Interrupt Vector Register */
-#define schr1   0x1a    /* Special Character Register 1 */
-#define schr2   0x1b    /* Special Character Register 2 */
-#define schr3   0x1c    /* Special Character Register 3 */
-#define schr4   0x1d    /* Special Character Register 4 */
-
-#define rtr     0x20    /* Receive Timer Register */
-#define rtpr    0x21    /* Receive Timeout Period Register */
-#define lnc     0x24    /* Lnext character */
-
-#define rivr    0x43    /* Receive Interrupt Vector Register    */
-#define tivr    0x42    /* Transmit Interrupt Vector Register   */
-#define mivr    0x41    /* Modem Interrupt Vector Register      */
-#define gfrcr   0x40    /* Global Firmware Revision code Reg    */
-#define ricr    0x44    /* Receive Interrupting Channel Reg     */
-#define ticr    0x45    /* Transmit Interrupting Channel Reg    */
-#define micr    0x46    /* Modem Interrupting Channel Register  */
-
-#define gcr     0x4b    /* Global configuration register*/
-#define misr    0x4c    /* Modem interrupt status register */
+#define ccr     0x05            /* Channel Command Register     */
+#define ier     0x06            /* Interrupt Enable Register    */
+#define cor1    0x08            /* Channel Option Register 1    */
+#define cor2    0x09            /* Channel Option Register 2    */
+#define cor3    0x0a            /* Channel Option Register 3    */
+#define cor4    0x1e            /* Channel Option Register 4    */
+#define cor5    0x1f            /* Channel Option Register 5    */
+
+#define ccsr    0x0b            /* Channel Control Status Register */
+#define rdcr    0x0e            /* Receive Data Count Register  */
+#define tdcr    0x12            /* Transmit Data Count Register */
+#define mcor1   0x15            /* Modem Change Option Register 1 */
+#define mcor2   0x16            /* Modem Change Option Regsiter 2 */
+
+#define livr    0x18            /* Local Interrupt Vector Register */
+#define schr1   0x1a            /* Special Character Register 1 */
+#define schr2   0x1b            /* Special Character Register 2 */
+#define schr3   0x1c            /* Special Character Register 3 */
+#define schr4   0x1d            /* Special Character Register 4 */
+
+#define rtr     0x20            /* Receive Timer Register */
+#define rtpr    0x21            /* Receive Timeout Period Register */
+#define lnc     0x24            /* Lnext character */
+
+#define rivr    0x43            /* Receive Interrupt Vector Register    */
+#define tivr    0x42            /* Transmit Interrupt Vector Register   */
+#define mivr    0x41            /* Modem Interrupt Vector Register      */
+#define gfrcr   0x40            /* Global Firmware Revision code Reg    */
+#define ricr    0x44            /* Receive Interrupting Channel Reg     */
+#define ticr    0x45            /* Transmit Interrupting Channel Reg    */
+#define micr    0x46            /* Modem Interrupting Channel Register  */
+
+#define gcr     0x4b            /* Global configuration register */
+#define misr    0x4c            /* Modem interrupt status register */
 
 #define rbusr   0x59
 #define tbusr   0x5a
 #define mbusr   0x5b
 
-#define eoir    0x60    /* End Of Interrupt Register */
-#define rdsr    0x62    /* Receive Data / Status Register */
-#define tdr     0x63    /* Transmit Data Register */
-#define svrr    0x67    /* Service Request Register */
+#define eoir    0x60            /* End Of Interrupt Register */
+#define rdsr    0x62            /* Receive Data / Status Register */
+#define tdr     0x63            /* Transmit Data Register */
+#define svrr    0x67            /* Service Request Register */
 
-#define car     0x68    /* Channel Access Register */
-#define mir     0x69    /* Modem Interrupt Register */
-#define tir     0x6a    /* Transmit Interrupt Register */
-#define rir     0x6b    /* Receive Interrupt Register */
-#define msvr1   0x6c    /* Modem Signal Value Register 1 */
-#define msvr2   0x6d    /* Modem Signal Value Register 2*/
-#define psvr    0x6f    /* Printer Signal Value Register*/
+#define car     0x68            /* Channel Access Register */
+#define mir     0x69            /* Modem Interrupt Register */
+#define tir     0x6a            /* Transmit Interrupt Register */
+#define rir     0x6b            /* Receive Interrupt Register */
+#define msvr1   0x6c            /* Modem Signal Value Register 1 */
+#define msvr2   0x6d            /* Modem Signal Value Register 2 */
+#define psvr    0x6f            /* Printer Signal Value Register */
 
-#define tbpr    0x72    /* Transmit Baud Rate Period Register */
-#define tcor    0x76    /* Transmit Clock Option Register */
+#define tbpr    0x72            /* Transmit Baud Rate Period Register */
+#define tcor    0x76            /* Transmit Clock Option Register */
 
-#define rbpr    0x78    /* Receive Baud Rate Period Register */
-#define rber    0x7a    /* Receive Baud Rate Extension Register */
-#define rcor    0x7c    /* Receive Clock Option Register*/
-#define ppr     0x7e    /* Prescalar Period Register    */
+#define rbpr    0x78            /* Receive Baud Rate Period Register */
+#define rber    0x7a            /* Receive Baud Rate Extension Register */
+#define rcor    0x7c            /* Receive Clock Option Register */
+#define ppr     0x7e            /* Prescalar Period Register    */
 
 /* Misc registers used for forcing the 1400 out of its reset woes */
 #define airl    0x6d
@@ -192,10 +192,10 @@
 
 /* RDSR - when status read from FIFO */
 #define RDSR_BREAK              0x08    /* Break received */
-#define RDSR_TIMEOUT            0x80    /* No new data timeout */
-#define RDSR_SC1                0x10    /* Special char 1 (tx XON) matched */
-#define RDSR_SC2                0x20    /* Special char 2 (tx XOFF) matched */
-#define RDSR_SC12_MASK          0x30    /* Mask for special chars 1 and 2 */
+#define RDSR_TIMEOUT            0x80    /* No new data timeout */
+#define RDSR_SC1                0x10    /* Special char 1 (tx XON) matched */
+#define RDSR_SC2                0x20    /* Special char 2 (tx XOFF) matched */
+#define RDSR_SC12_MASK          0x30    /* Mask for special chars 1 and 2 */
 
 /* PPR */
 #define PPR_DEFAULT     0x31    /* Default value - for a 25Mhz clock gives
@@ -244,7 +244,7 @@
 #define IER_TIMEOUT     0x01    /* Timeout on no data */
 
 #define IER_DEFAULT     0x94    /* Default values */
-#define IER_PARALLEL    0x84    /* Default for Parallel */
+#define IER_PARALLEL    0x84    /* Default for Parallel */
 #define IER_EMPTY       0x92    /* Transmitter empty rather than ready */
 
 /* COR1 - Driver only */
@@ -264,11 +264,11 @@
 #define COR1_7BITS      0x02    /* 7 data bits */
 #define COR1_8BITS      0x03    /* 8 data bits */
 
-#define COR1_HOST       0xef    /* Safe host bits */
+#define COR1_HOST       0xef    /* Safe host bits */
 
 /* RTA only */
-#define COR1_CINPCK     0x00    /* Check parity of received characters */
-#define COR1_CNINPCK    0x10    /* Don't check parity */
+#define COR1_CINPCK     0x00    /* Check parity of received characters */
+#define COR1_CNINPCK    0x10    /* Don't check parity */
 
 /* COR2 bits for both RTA and driver use */
 #define COR2_IXANY      0x80    /* IXANY - any character is XON */
@@ -293,9 +293,9 @@
 #define COR3_FCT        0x20    /* Flow control transparency */
 #define COR3_SCD12      0x10    /* Special character detect for SCHR's 1 + 2 */
 #define COR3_FIFO12     0x0c    /* 12 chars for receive FIFO threshold */
-#define COR3_FIFO10     0x0a    /* 10 chars for receive FIFO threshold */
-#define COR3_FIFO8      0x08    /* 8 chars for receive FIFO threshold */
-#define COR3_FIFO6      0x06    /* 6 chars for receive FIFO threshold */
+#define COR3_FIFO10     0x0a    /* 10 chars for receive FIFO threshold */
+#define COR3_FIFO8      0x08    /* 8 chars for receive FIFO threshold */
+#define COR3_FIFO6      0x06    /* 6 chars for receive FIFO threshold */
 
 #define COR3_THRESHOLD  COR3_FIFO8      /* MUST BE LESS THAN MCOR_THRESHOLD */
 
@@ -386,7 +386,7 @@
 
 #define MCOR_THRESHBITS 0x0F    /* mask for ANDing out the above */
 
-#define MCOR_THRESHOLD  MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */
+#define MCOR_THRESHOLD  MCOR_THRESH9    /* MUST BE GREATER THAN COR3_THRESHOLD */
 
 
 /* RTPR */
@@ -429,25 +429,25 @@
 #define CONFIG          0x01    /* Configure a port */
 #define MOPEN           0x02    /* Modem open (block for DCD) */
 #define CLOSE           0x03    /* Close a port */
-#define WFLUSH          (0x04 | PRE_EMPTIVE) /* Write flush */
-#define RFLUSH          (0x05 | PRE_EMPTIVE) /* Read flush */
-#define RESUME          (0x06 | PRE_EMPTIVE) /* Resume if xoffed */
-#define SBREAK          0x07    /* Start break */
+#define WFLUSH          (0x04 | PRE_EMPTIVE)    /* Write flush */
+#define RFLUSH          (0x05 | PRE_EMPTIVE)    /* Read flush */
+#define RESUME          (0x06 | PRE_EMPTIVE)    /* Resume if xoffed */
+#define SBREAK          0x07    /* Start break */
 #define EBREAK          0x08    /* End break */
-#define SUSPEND         (0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
-#define FCLOSE          (0x0a | PRE_EMPTIVE) /* Force close */
-#define XPRINT          0x0b    /* Xprint packet */
-#define MBIS            (0x0c | PRE_EMPTIVE) /* Set modem lines */
-#define MBIC            (0x0d | PRE_EMPTIVE) /* Clear modem lines */
-#define MSET            (0x0e | PRE_EMPTIVE) /* Set modem lines */
+#define SUSPEND         (0x09 | PRE_EMPTIVE)    /* Susp op (behave as tho xoffed) */
+#define FCLOSE          (0x0a | PRE_EMPTIVE)    /* Force close */
+#define XPRINT          0x0b    /* Xprint packet */
+#define MBIS            (0x0c | PRE_EMPTIVE)    /* Set modem lines */
+#define MBIC            (0x0d | PRE_EMPTIVE)    /* Clear modem lines */
+#define MSET            (0x0e | PRE_EMPTIVE)    /* Set modem lines */
 #define PCLOSE          0x0f    /* Pseudo close - Leaves rx/tx enabled */
-#define MGET            (0x10 | PRE_EMPTIVE) /* Force update of modem status */
-#define MEMDUMP         (0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
-#define READ_REGISTER   (0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */
+#define MGET            (0x10 | PRE_EMPTIVE)    /* Force update of modem status */
+#define MEMDUMP         (0x11 | PRE_EMPTIVE)    /* Send back mem from addr supplied */
+#define READ_REGISTER   (0x12 | PRE_EMPTIVE)    /* Read CD1400 register (debug) */
 
 /* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
    use data[4] / data[3] to indicate current state and modem status respectively
-*/ 
+*/
 
 #define COMPLETE        (0x20 | PRE_EMPTIVE)
                                 /* Command complete */