Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 50 insertions, 0 deletions

diff --git a/drivers/char/mwave/README b/drivers/char/mwave/README
new file mode 100644
index 000000000000..70f8d19fb79f
--- /dev/null
+++ b/drivers/char/mwave/README
@@ -0,0 +1,50 @@
+Module options
+--------------
+
+The mwave module takes the following options.  Note that these options
+are not saved by the BIOS and so do not persist after unload and reload.
+
+  mwave_debug=value, where value is bitwise OR of trace flags:
+        0x0001 mwavedd api tracing
+        0x0002 smapi api tracing
+        0x0004 3780i tracing
+        0x0008 tp3780i tracing
+
+        Tracing only occurs if the driver has been compiled with the
+        MW_TRACE macro #defined  (i.e. let EXTRA_CFLAGS += -DMW_TRACE
+        in the Makefile).
+
+  mwave_3780i_irq=5/7/10/11/15
+        If the dsp irq has not been setup and stored in bios by the 
+        thinkpad configuration utility then this parameter allows the
+        irq used by the dsp to be configured.
+
+  mwave_3780i_io=0x130/0x350/0x0070/0xDB0
+        If the dsp io range has not been setup and stored in bios by the 
+        thinkpad configuration utility then this parameter allows the
+        io range used by the dsp to be configured.
+
+  mwave_uart_irq=3/4
+        If the mwave's uart irq has not been setup and stored in bios by the 
+        thinkpad configuration utility then this parameter allows the
+        irq used by the mwave uart to be configured.
+
+  mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
+        If the uart io range has not been setup and stored in bios by the 
+        thinkpad configuration utility then this parameter allows the
+        io range used by the mwave uart to be configured.
+
+Example to enable the 3780i DSP using ttyS1 resources:
+        
+  insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8
+
+Accessing the driver
+--------------------
+
+You must also create a node for the driver.  Without devfs:
+  mkdir -p /dev/modems
+  mknod --mode=660 /dev/modems/mwave c 10 219
+With devfs:
+  mkdir -p /dev/modems
+  ln -s ../misc/mwave /dev/modems/mwave
+