Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 100 insertions, 0 deletions

diff --git a/drivers/char/digi1.h b/drivers/char/digi1.h
new file mode 100644
index 000000000000..184378d23f8c
--- /dev/null
+++ b/drivers/char/digi1.h
@@ -0,0 +1,100 @@
+/*          Definitions for DigiBoard ditty(1) command.                 */
+
+#if !defined(TIOCMODG)
+#define TIOCMODG        ('d'<<8) | 250          /* get modem ctrl state */
+#define TIOCMODS        ('d'<<8) | 251          /* set modem ctrl state */
+#endif
+
+#if !defined(TIOCMSET)
+#define TIOCMSET        ('d'<<8) | 252          /* set modem ctrl state */
+#define TIOCMGET        ('d'<<8) | 253          /* set modem ctrl state */
+#endif
+
+#if !defined(TIOCMBIC)
+#define TIOCMBIC        ('d'<<8) | 254          /* set modem ctrl state */
+#define TIOCMBIS        ('d'<<8) | 255          /* set modem ctrl state */
+#endif
+
+#if !defined(TIOCSDTR)
+#define TIOCSDTR        ('e'<<8) | 0            /* set DTR              */
+#define TIOCCDTR        ('e'<<8) | 1            /* clear DTR            */
+#endif
+
+/************************************************************************
+ * Ioctl command arguments for DIGI parameters.
+ ************************************************************************/
+#define DIGI_GETA       ('e'<<8) | 94           /* Read params          */
+
+#define DIGI_SETA       ('e'<<8) | 95           /* Set params           */
+#define DIGI_SETAW      ('e'<<8) | 96           /* Drain & set params   */
+#define DIGI_SETAF      ('e'<<8) | 97           /* Drain, flush & set params */
+
+#define DIGI_GETFLOW    ('e'<<8) | 99           /* Get startc/stopc flow */
+                                                /* control characters    */
+#define DIGI_SETFLOW    ('e'<<8) | 100          /* Set startc/stopc flow */
+                                                /* control characters    */
+#define DIGI_GETAFLOW   ('e'<<8) | 101          /* Get Aux. startc/stopc */
+                                                /* flow control chars    */
+#define DIGI_SETAFLOW   ('e'<<8) | 102          /* Set Aux. startc/stopc */
+                                                /* flow control chars    */
+
+#define DIGI_GETINFO    ('e'<<8) | 103          /* Fill in digi_info */
+#define DIGI_POLLER     ('e'<<8) | 104          /* Turn on/off poller */
+#define DIGI_INIT       ('e'<<8) | 105          /* Allow things to run. */
+
+struct  digiflow_struct 
+{
+        unsigned char   startc;                         /* flow cntl start char */
+        unsigned char   stopc;                          /* flow cntl stop char  */
+};
+
+typedef struct digiflow_struct digiflow_t;
+
+
+/************************************************************************
+ * Values for digi_flags 
+ ************************************************************************/
+#define DIGI_IXON       0x0001          /* Handle IXON in the FEP       */
+#define DIGI_FAST       0x0002          /* Fast baud rates              */
+#define RTSPACE         0x0004          /* RTS input flow control       */
+#define CTSPACE         0x0008          /* CTS output flow control      */
+#define DSRPACE         0x0010          /* DSR output flow control      */
+#define DCDPACE         0x0020          /* DCD output flow control      */
+#define DTRPACE         0x0040          /* DTR input flow control       */
+#define DIGI_FORCEDCD   0x0100          /* Force carrier                */
+#define DIGI_ALTPIN     0x0200          /* Alternate RJ-45 pin config   */
+#define DIGI_AIXON      0x0400          /* Aux flow control in fep      */
+
+
+/************************************************************************
+ * Values for digiDload
+ ************************************************************************/
+#define NORMAL  0
+#define PCI_CTL 1
+
+#define SIZE8  0
+#define SIZE16 1
+#define SIZE32 2
+
+/************************************************************************
+ * Structure used with ioctl commands for DIGI parameters.
+ ************************************************************************/
+struct digi_struct 
+{
+        unsigned short  digi_flags;             /* Flags (see above)    */
+};
+
+typedef struct digi_struct digi_t;
+
+struct digi_info 
+{
+        unsigned long board;        /* Which board is this ? */
+        unsigned char status;       /* Alive or dead */
+        unsigned char type;         /* see epca.h */
+        unsigned char subtype;      /* For future XEM, XR, etc ... */
+        unsigned short numports;    /* Number of ports configured */
+        unsigned char *port;        /* I/O Address */
+        unsigned char *membase;     /* DPR Address */
+        unsigned char *version;     /* For future ... */
+        unsigned short windowData;  /* For future ... */
+} ;