tty: move a number of tty drivers from drivers/char/ to drivers/tty/

As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 172 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 9b9ab867f50e..1adfac6a7b0b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -15,36 +15,6 @@ config DEVKMEM
           kind of kernel debugging operations.
           When in doubt, say "N".
 
-config BFIN_JTAG_COMM
-        tristate "Blackfin JTAG Communication"
-        depends on BLACKFIN
-        help
-          Add support for emulating a TTY device over the Blackfin JTAG.
-
-          To compile this driver as a module, choose M here: the
-          module will be called bfin_jtag_comm.
-
-config BFIN_JTAG_COMM_CONSOLE
-        bool "Console on Blackfin JTAG"
-        depends on BFIN_JTAG_COMM=y
-
-config SERIAL_NONSTANDARD
-        bool "Non-standard serial port support"
-        depends on HAS_IOMEM
-        ---help---
-          Say Y here if you have any non-standard serial boards -- boards
-          which aren't supported using the standard "dumb" serial driver.
-          This includes intelligent serial boards such as Cyclades,
-          Digiboards, etc. These are usually used for systems that need many
-          serial ports because they serve many terminals or dial-in
-          connections.
-
-          Note that the answer to this question won't directly affect the
-          kernel: saying N will just cause the configurator to skip all
-          the questions about non-standard serial boards.
-
-          Most people can say N here.
-
 config COMPUTONE
         tristate "Computone IntelliPort Plus serial support"
         depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -60,50 +30,6 @@ config COMPUTONE
           To compile this driver as module, choose M here: the
           module will be called ip2.
 
-config ROCKETPORT
-        tristate "Comtrol RocketPort support"
-        depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-        help
-          This driver supports Comtrol RocketPort and RocketModem PCI boards.   
-          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
-          modems.  For information about the RocketPort/RocketModem  boards
-          and this driver read <file:Documentation/serial/rocket.txt>.
-
-          To compile this driver as a module, choose M here: the
-          module will be called rocket.
-
-          If you want to compile this driver into the kernel, say Y here.  If
-          you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
-        tristate "Cyclades async mux support"
-        depends on SERIAL_NONSTANDARD && (PCI || ISA)
-        select FW_LOADER
-        ---help---
-          This driver supports Cyclades Z and Y multiserial boards.
-          You would need something like this to connect more than two modems to
-          your Linux box, for instance in order to become a dial-in server.
-
-          For information about the Cyclades-Z card, read
-          <file:Documentation/serial/README.cycladesZ>.
-
-          To compile this driver as a module, choose M here: the
-          module will be called cyclades.
-
-          If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
-        bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
-        depends on EXPERIMENTAL && CYCLADES
-        help
-          The Cyclades-Z family of multiport cards allows 2 (two) driver op
-          modes: polling and interrupt. In polling mode, the driver will check
-          the status of the Cyclades-Z ports every certain amount of time
-          (which is called polling cycle and is configurable). In interrupt
-          mode, it will use an interrupt line (IRQ) in order to check the
-          status of the Cyclades-Z ports. The default op mode is polling. If
-          unsure, say N.
-
 config DIGIEPCA
         tristate "Digiboard Intelligent Async Support"
         depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
@@ -119,94 +45,6 @@ config DIGIEPCA
           To compile this driver as a module, choose M here: the
           module will be called epca.
 
-config MOXA_INTELLIO
-        tristate "Moxa Intellio support"
-        depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-        select FW_LOADER
-        help
-          Say Y here if you have a Moxa Intellio multiport serial card.
-
-          To compile this driver as a module, choose M here: the
-          module will be called moxa.
-
-config MOXA_SMARTIO
-        tristate "Moxa SmartIO support v. 2.0"
-        depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
-        help
-          Say Y here if you have a Moxa SmartIO multiport serial card and/or
-          want to help develop a new version of this driver.
-
-          This is upgraded (1.9.1) driver from original Moxa drivers with
-          changes finally resulting in PCI probing.
-
-          This driver can also be built as a module. The module will be called
-          mxser. If you want to do that, say M here.
-
-config ISI
-        tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
-        depends on SERIAL_NONSTANDARD && PCI
-        select FW_LOADER
-        help
-          This is a driver for the Multi-Tech cards which provide several
-          serial ports.  The driver is experimental and can currently only be
-          built as a module. The module will be called isicom.
-          If you want to do that, choose M here.
-
-config SYNCLINK
-        tristate "Microgate SyncLink card support"
-        depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
-        help
-          Provides support for the SyncLink ISA and PCI multiprotocol serial
-          adapters. These adapters support asynchronous and HDLC bit
-          synchronous communication up to 10Mbps (PCI adapter).
-
-          This driver can only be built as a module ( = code which can be
-          inserted in and removed from the running kernel whenever you want).
-          The module will be called synclink.  If you want to do that, say M
-          here.
-
-config SYNCLINKMP
-        tristate "SyncLink Multiport support"
-        depends on SERIAL_NONSTANDARD && PCI
-        help
-          Enable support for the SyncLink Multiport (2 or 4 ports)
-          serial adapter, running asynchronous and HDLC communications up
-          to 2.048Mbps. Each ports is independently selectable for
-          RS-232, V.35, RS-449, RS-530, and X.21
-
-          This driver may be built as a module ( = code which can be
-          inserted in and removed from the running kernel whenever you want).
-          The module will be called synclinkmp.  If you want to do that, say M
-          here.
-
-config SYNCLINK_GT
-        tristate "SyncLink GT/AC support"
-        depends on SERIAL_NONSTANDARD && PCI
-        help
-          Support for SyncLink GT and SyncLink AC families of
-          synchronous and asynchronous serial adapters
-          manufactured by Microgate Systems, Ltd. (www.microgate.com)
-
-config N_HDLC
-        tristate "HDLC line discipline support"
-        depends on SERIAL_NONSTANDARD
-        help
-          Allows synchronous HDLC communications with tty device drivers that
-          support synchronous HDLC such as the Microgate SyncLink adapter.
-
-          This driver can be built as a module ( = code which can be
-          inserted in and removed from the running kernel whenever you want).
-          The module will be called n_hdlc. If you want to do that, say M
-          here.
-
-config N_GSM
-        tristate "GSM MUX line discipline support (EXPERIMENTAL)"
-        depends on EXPERIMENTAL
-        depends on NET
-        help
-          This line discipline provides support for the GSM MUX protocol and
-          presents the mux as a set of 61 individual tty devices.
-
 config RISCOM8
         tristate "SDL RISCom/8 card support"
         depends on SERIAL_NONSTANDARD
@@ -296,16 +134,6 @@ config ISTALLION
           To compile this driver as a module, choose M here: the
           module will be called istallion.
 
-config NOZOMI
-        tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
-        depends on PCI && EXPERIMENTAL
-        help
-          If you have a HSDPA driver Broadband Wireless Data Card -
-          Globe Trotter PCMCIA card, say Y here.
-
-          To compile this driver as a module, choose M here, the module
-          will be called nozomi.
-
 config A2232
         tristate "Commodore A2232 serial support (EXPERIMENTAL)"
         depends on EXPERIMENTAL && ZORRO && BROKEN