aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/char/Kconfig')
-rw-r--r--drivers/char/Kconfig988
1 files changed, 988 insertions, 0 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
new file mode 100644
index 000000000000..096a1202ea07
--- /dev/null
+++ b/drivers/char/Kconfig
@@ -0,0 +1,988 @@
1#
2# Character device configuration
3#
4
5menu "Character devices"
6
7config VT
8 bool "Virtual terminal" if EMBEDDED
9 select INPUT
10 default y if !VIOCONS
11 ---help---
12 If you say Y here, you will get support for terminal devices with
13 display and keyboard devices. These are called "virtual" because you
14 can run several virtual terminals (also called virtual consoles) on
15 one physical terminal. This is rather useful, for example one
16 virtual terminal can collect system messages and warnings, another
17 one can be used for a text-mode user session, and a third could run
18 an X session, all in parallel. Switching between virtual terminals
19 is done with certain key combinations, usually Alt-<function key>.
20
21 The setterm command ("man setterm") can be used to change the
22 properties (such as colors or beeping) of a virtual terminal. The
23 man page console_codes(4) ("man console_codes") contains the special
24 character sequences that can be used to change those properties
25 directly. The fonts used on virtual terminals can be changed with
26 the setfont ("man setfont") command and the key bindings are defined
27 with the loadkeys ("man loadkeys") command.
28
29 You need at least one virtual terminal device in order to make use
30 of your keyboard and monitor. Therefore, only people configuring an
31 embedded system would want to say N here in order to save some
32 memory; the only way to log into such a system is then via a serial
33 or network connection.
34
35 If unsure, say Y, or else you won't be able to do much with your new
36 shiny Linux system :-)
37
38config VT_CONSOLE
39 bool "Support for console on virtual terminal" if EMBEDDED
40 depends on VT
41 default y
42 ---help---
43 The system console is the device which receives all kernel messages
44 and warnings and which allows logins in single user mode. If you
45 answer Y here, a virtual terminal (the device used to interact with
46 a physical terminal) can be used as system console. This is the most
47 common mode of operations, so you should say Y here unless you want
48 the kernel messages be output only to a serial port (in which case
49 you should say Y to "Console on serial port", below).
50
51 If you do say Y here, by default the currently visible virtual
52 terminal (/dev/tty0) will be used as system console. You can change
53 that with a kernel command line option such as "console=tty3" which
54 would use the third virtual terminal as system console. (Try "man
55 bootparam" or see the documentation of your boot loader (lilo or
56 loadlin) about how to pass options to the kernel at boot time.)
57
58 If unsure, say Y.
59
60config HW_CONSOLE
61 bool
62 depends on VT && !S390 && !UML
63 default y
64
65config SERIAL_NONSTANDARD
66 bool "Non-standard serial port support"
67 ---help---
68 Say Y here if you have any non-standard serial boards -- boards
69 which aren't supported using the standard "dumb" serial driver.
70 This includes intelligent serial boards such as Cyclades,
71 Digiboards, etc. These are usually used for systems that need many
72 serial ports because they serve many terminals or dial-in
73 connections.
74
75 Note that the answer to this question won't directly affect the
76 kernel: saying N will just cause the configurator to skip all
77 the questions about non-standard serial boards.
78
79 Most people can say N here.
80
81config COMPUTONE
82 tristate "Computone IntelliPort Plus serial support"
83 depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
84 ---help---
85 This driver supports the entire family of Intelliport II/Plus
86 controllers with the exception of the MicroChannel controllers and
87 products previous to the Intelliport II. These are multiport cards,
88 which give you many serial ports. You would need something like this
89 to connect more than two modems to your Linux box, for instance in
90 order to become a dial-in server. If you have a card like that, say
91 Y here and read <file:Documentation/computone.txt>.
92
93 To compile this driver as modules, choose M here: the
94 modules will be called ip2 and ip2main.
95
96config ROCKETPORT
97 tristate "Comtrol RocketPort support"
98 depends on SERIAL_NONSTANDARD
99 help
100 This driver supports Comtrol RocketPort and RocketModem PCI boards.
101 These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
102 modems. For information about the RocketPort/RocketModem boards
103 and this driver read <file:Documentation/rocket.txt>.
104
105 To compile this driver as a module, choose M here: the
106 module will be called rocket.
107
108 If you want to compile this driver into the kernel, say Y here. If
109 you don't have a Comtrol RocketPort/RocketModem card installed, say N.
110
111config CYCLADES
112 tristate "Cyclades async mux support"
113 depends on SERIAL_NONSTANDARD
114 ---help---
115 This driver supports Cyclades Z and Y multiserial boards.
116 You would need something like this to connect more than two modems to
117 your Linux box, for instance in order to become a dial-in server.
118
119 For information about the Cyclades-Z card, read
120 <file:drivers/char/README.cycladesZ>.
121
122 To compile this driver as a module, choose M here: the
123 module will be called cyclades.
124
125 If you haven't heard about it, it's safe to say N.
126
127config CYZ_INTR
128 bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
129 depends on EXPERIMENTAL && CYCLADES
130 help
131 The Cyclades-Z family of multiport cards allows 2 (two) driver op
132 modes: polling and interrupt. In polling mode, the driver will check
133 the status of the Cyclades-Z ports every certain amount of time
134 (which is called polling cycle and is configurable). In interrupt
135 mode, it will use an interrupt line (IRQ) in order to check the
136 status of the Cyclades-Z ports. The default op mode is polling. If
137 unsure, say N.
138
139config DIGIEPCA
140 tristate "Digiboard Intelligent Async Support"
141 depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
142 ---help---
143 This is a driver for Digi International's Xx, Xeve, and Xem series
144 of cards which provide multiple serial ports. You would need
145 something like this to connect more than two modems to your Linux
146 box, for instance in order to become a dial-in server. This driver
147 supports the original PC (ISA) boards as well as PCI, and EISA. If
148 you have a card like this, say Y here and read the file
149 <file:Documentation/digiepca.txt>.
150
151 To compile this driver as a module, choose M here: the
152 module will be called epca.
153
154config ESPSERIAL
155 tristate "Hayes ESP serial port support"
156 depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
157 help
158 This is a driver which supports Hayes ESP serial ports. Both single
159 port cards and multiport cards are supported. Make sure to read
160 <file:Documentation/hayes-esp.txt>.
161
162 To compile this driver as a module, choose M here: the
163 module will be called esp.
164
165 If unsure, say N.
166
167config MOXA_INTELLIO
168 tristate "Moxa Intellio support"
169 depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
170 help
171 Say Y here if you have a Moxa Intellio multiport serial card.
172
173 To compile this driver as a module, choose M here: the
174 module will be called moxa.
175
176config MOXA_SMARTIO
177 tristate "Moxa SmartIO support"
178 depends on SERIAL_NONSTANDARD
179 help
180 Say Y here if you have a Moxa SmartIO multiport serial card.
181
182 This driver can also be built as a module ( = code which can be
183 inserted in and removed from the running kernel whenever you want).
184 The module will be called mxser. If you want to do that, say M
185 here.
186
187config ISI
188 tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
189 depends on SERIAL_NONSTANDARD
190 help
191 This is a driver for the Multi-Tech cards which provide several
192 serial ports. The driver is experimental and can currently only be
193 built as a module. The module will be called isicom.
194 If you want to do that, choose M here.
195
196config SYNCLINK
197 tristate "Microgate SyncLink card support"
198 depends on SERIAL_NONSTANDARD && PCI
199 help
200 Provides support for the SyncLink ISA and PCI multiprotocol serial
201 adapters. These adapters support asynchronous and HDLC bit
202 synchronous communication up to 10Mbps (PCI adapter).
203
204 This driver can only be built as a module ( = code which can be
205 inserted in and removed from the running kernel whenever you want).
206 The module will be called synclink. If you want to do that, say M
207 here.
208
209config SYNCLINKMP
210 tristate "SyncLink Multiport support"
211 depends on SERIAL_NONSTANDARD
212 help
213 Enable support for the SyncLink Multiport (2 or 4 ports)
214 serial adapter, running asynchronous and HDLC communications up
215 to 2.048Mbps. Each ports is independently selectable for
216 RS-232, V.35, RS-449, RS-530, and X.21
217
218 This driver may be built as a module ( = code which can be
219 inserted in and removed from the running kernel whenever you want).
220 The module will be called synclinkmp. If you want to do that, say M
221 here.
222
223config N_HDLC
224 tristate "HDLC line discipline support"
225 depends on SERIAL_NONSTANDARD
226 help
227 Allows synchronous HDLC communications with tty device drivers that
228 support synchronous HDLC such as the Microgate SyncLink adapter.
229
230 This driver can only be built as a module ( = code which can be
231 inserted in and removed from the running kernel whenever you want).
232 The module will be called n_hdlc. If you want to do that, say M
233 here.
234
235config RISCOM8
236 tristate "SDL RISCom/8 card support"
237 depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
238 help
239 This is a driver for the SDL Communications RISCom/8 multiport card,
240 which gives you many serial ports. You would need something like
241 this to connect more than two modems to your Linux box, for instance
242 in order to become a dial-in server. If you have a card like that,
243 say Y here and read the file <file:Documentation/riscom8.txt>.
244
245 Also it's possible to say M here and compile this driver as kernel
246 loadable module; the module will be called riscom8.
247
248config SPECIALIX
249 tristate "Specialix IO8+ card support"
250 depends on SERIAL_NONSTANDARD
251 help
252 This is a driver for the Specialix IO8+ multiport card (both the
253 ISA and the PCI version) which gives you many serial ports. You
254 would need something like this to connect more than two modems to
255 your Linux box, for instance in order to become a dial-in server.
256
257 If you have a card like that, say Y here and read the file
258 <file:Documentation/specialix.txt>. Also it's possible to say M here
259 and compile this driver as kernel loadable module which will be
260 called specialix.
261
262config SPECIALIX_RTSCTS
263 bool "Specialix DTR/RTS pin is RTS"
264 depends on SPECIALIX
265 help
266 The Specialix IO8+ card can only support either RTS or DTR. If you
267 say N here, the driver will use the pin as "DTR" when the tty is in
268 software handshake mode. If you say Y here or hardware handshake is
269 on, it will always be RTS. Read the file
270 <file:Documentation/specialix.txt> for more information.
271
272config SX
273 tristate "Specialix SX (and SI) card support"
274 depends on SERIAL_NONSTANDARD
275 help
276 This is a driver for the SX and SI multiport serial cards.
277 Please read the file <file:Documentation/sx.txt> for details.
278
279 This driver can only be built as a module ( = code which can be
280 inserted in and removed from the running kernel whenever you want).
281 The module will be called sx. If you want to do that, say M here.
282
283config RIO
284 tristate "Specialix RIO system support"
285 depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
286 help
287 This is a driver for the Specialix RIO, a smart serial card which
288 drives an outboard box that can support up to 128 ports. Product
289 information is at <http://www.perle.com/support/documentation.html#multiport>.
290 There are both ISA and PCI versions.
291
292config RIO_OLDPCI
293 bool "Support really old RIO/PCI cards"
294 depends on RIO
295 help
296 Older RIO PCI cards need some initialization-time configuration to
297 determine the IRQ and some control addresses. If you have a RIO and
298 this doesn't seem to work, try setting this to Y.
299
300config STALDRV
301 bool "Stallion multiport serial support"
302 depends on SERIAL_NONSTANDARD
303 help
304 Stallion cards give you many serial ports. You would need something
305 like this to connect more than two modems to your Linux box, for
306 instance in order to become a dial-in server. If you say Y here,
307 you will be asked for your specific card model in the next
308 questions. Make sure to read <file:Documentation/stallion.txt> in
309 this case. If you have never heard about all this, it's safe to
310 say N.
311
312config STALLION
313 tristate "Stallion EasyIO or EC8/32 support"
314 depends on STALDRV && BROKEN_ON_SMP
315 help
316 If you have an EasyIO or EasyConnection 8/32 multiport Stallion
317 card, then this is for you; say Y. Make sure to read
318 <file:Documentation/stallion.txt>.
319
320 To compile this driver as a module, choose M here: the
321 module will be called stallion.
322
323config ISTALLION
324 tristate "Stallion EC8/64, ONboard, Brumby support"
325 depends on STALDRV && BROKEN_ON_SMP
326 help
327 If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
328 serial multiport card, say Y here. Make sure to read
329 <file:Documentation/stallion.txt>.
330
331 To compile this driver as a module, choose M here: the
332 module will be called istallion.
333
334config AU1000_UART
335 bool "Enable Au1000 UART Support"
336 depends on SERIAL_NONSTANDARD && MIPS
337 help
338 If you have an Alchemy AU1000 processor (MIPS based) and you want
339 to use serial ports, say Y. Otherwise, say N.
340
341config AU1000_SERIAL_CONSOLE
342 bool "Enable Au1000 serial console"
343 depends on AU1000_UART
344 help
345 If you have an Alchemy AU1000 processor (MIPS based) and you want
346 to use a console on a serial port, say Y. Otherwise, say N.
347
348config QTRONIX_KEYBOARD
349 bool "Enable Qtronix 990P Keyboard Support"
350 depends on IT8712
351 help
352 Images of Qtronix keyboards are at
353 <http://www.qtronix.com/keyboard.html>.
354
355config IT8172_CIR
356 bool
357 depends on QTRONIX_KEYBOARD
358 default y
359
360config IT8172_SCR0
361 bool "Enable Smart Card Reader 0 Support "
362 depends on IT8712
363 help
364 Say Y here to support smart-card reader 0 (SCR0) on the Integrated
365 Technology Express, Inc. ITE8172 SBC. Vendor page at
366 <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
367 board at <http://www.mvista.com/partners/semiconductor/ite.html>.
368
369config IT8172_SCR1
370 bool "Enable Smart Card Reader 1 Support "
371 depends on IT8712
372 help
373 Say Y here to support smart-card reader 1 (SCR1) on the Integrated
374 Technology Express, Inc. ITE8172 SBC. Vendor page at
375 <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
376 board at <http://www.mvista.com/partners/semiconductor/ite.html>.
377
378config A2232
379 tristate "Commodore A2232 serial support (EXPERIMENTAL)"
380 depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
381 ---help---
382 This option supports the 2232 7-port serial card shipped with the
383 Amiga 2000 and other Zorro-bus machines, dating from 1989. At
384 a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
385 each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
386 ports were connected with 8 pin DIN connectors on the card bracket,
387 for which 8 pin to DB25 adapters were supplied. The card also had
388 jumpers internally to toggle various pinning configurations.
389
390 This driver can be built as a module; but then "generic_serial"
391 will also be built as a module. This has to be loaded before
392 "ser_a2232". If you want to do this, answer M here.
393
394config SGI_SNSC
395 bool "SGI Altix system controller communication support"
396 depends on (IA64_SGI_SN2 || IA64_GENERIC)
397 help
398 If you have an SGI Altix and you want to enable system
399 controller communication from user space (you want this!),
400 say Y. Otherwise, say N.
401
402source "drivers/serial/Kconfig"
403
404config UNIX98_PTYS
405 bool "Unix98 PTY support" if EMBEDDED
406 default y
407 ---help---
408 A pseudo terminal (PTY) is a software device consisting of two
409 halves: a master and a slave. The slave device behaves identical to
410 a physical terminal; the master device is used by a process to
411 read data from and write data to the slave, thereby emulating a
412 terminal. Typical programs for the master side are telnet servers
413 and xterms.
414
415 Linux has traditionally used the BSD-like names /dev/ptyxx for
416 masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
417 has a number of problems. The GNU C library glibc 2.1 and later,
418 however, supports the Unix98 naming standard: in order to acquire a
419 pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
420 terminal is then made available to the process and the pseudo
421 terminal slave can be accessed as /dev/pts/<number>. What was
422 traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
423
424 All modern Linux systems use the Unix98 ptys. Say Y unless
425 you're on an embedded system and want to conserve memory.
426
427config LEGACY_PTYS
428 bool "Legacy (BSD) PTY support"
429 default y
430 ---help---
431 A pseudo terminal (PTY) is a software device consisting of two
432 halves: a master and a slave. The slave device behaves identical to
433 a physical terminal; the master device is used by a process to
434 read data from and write data to the slave, thereby emulating a
435 terminal. Typical programs for the master side are telnet servers
436 and xterms.
437
438 Linux has traditionally used the BSD-like names /dev/ptyxx
439 for masters and /dev/ttyxx for slaves of pseudo
440 terminals. This scheme has a number of problems, including
441 security. This option enables these legacy devices; on most
442 systems, it is safe to say N.
443
444
445config LEGACY_PTY_COUNT
446 int "Maximum number of legacy PTY in use"
447 depends on LEGACY_PTYS
448 range 1 256
449 default "256"
450 ---help---
451 The maximum number of legacy PTYs that can be used at any one time.
452 The default is 256, and should be more than enough. Embedded
453 systems may want to reduce this to save memory.
454
455 When not in use, each legacy PTY occupies 12 bytes on 32-bit
456 architectures and 24 bytes on 64-bit architectures.
457
458config PRINTER
459 tristate "Parallel printer support"
460 depends on PARPORT
461 ---help---
462 If you intend to attach a printer to the parallel port of your Linux
463 box (as opposed to using a serial printer; if the connector at the
464 printer has 9 or 25 holes ["female"], then it's serial), say Y.
465 Also read the Printing-HOWTO, available from
466 <http://www.tldp.org/docs.html#howto>.
467
468 It is possible to share one parallel port among several devices
469 (e.g. printer and ZIP drive) and it is safe to compile the
470 corresponding drivers into the kernel.
471
472 To compile this driver as a module, choose M here and read
473 <file:Documentation/parport.txt>. The module will be called lp.
474
475 If you have several parallel ports, you can specify which ports to
476 use with the "lp" kernel command line option. (Try "man bootparam"
477 or see the documentation of your boot loader (lilo or loadlin) about
478 how to pass options to the kernel at boot time.) The syntax of the
479 "lp" command line option can be found in <file:drivers/char/lp.c>.
480
481 If you have more than 8 printers, you need to increase the LP_NO
482 macro in lp.c and the PARPORT_MAX macro in parport.h.
483
484config LP_CONSOLE
485 bool "Support for console on line printer"
486 depends on PRINTER
487 ---help---
488 If you want kernel messages to be printed out as they occur, you
489 can have a console on the printer. This option adds support for
490 doing that; to actually get it to happen you need to pass the
491 option "console=lp0" to the kernel at boot time.
492
493 If the printer is out of paper (or off, or unplugged, or too
494 busy..) the kernel will stall until the printer is ready again.
495 By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
496 can make the kernel continue when this happens,
497 but it'll lose the kernel messages.
498
499 If unsure, say N.
500
501config PPDEV
502 tristate "Support for user-space parallel port device drivers"
503 depends on PARPORT
504 ---help---
505 Saying Y to this adds support for /dev/parport device nodes. This
506 is needed for programs that want portable access to the parallel
507 port, for instance deviceid (which displays Plug-and-Play device
508 IDs).
509
510 This is the parallel port equivalent of SCSI generic support (sg).
511 It is safe to say N to this -- it is not needed for normal printing
512 or parallel port CD-ROM/disk support.
513
514 To compile this driver as a module, choose M here: the
515 module will be called ppdev.
516
517 If unsure, say N.
518
519config TIPAR
520 tristate "Texas Instruments parallel link cable support"
521 depends on PARPORT
522 ---help---
523 If you own a Texas Instruments graphing calculator and use a
524 parallel link cable, then you might be interested in this driver.
525
526 If you enable this driver, you will be able to communicate with
527 your calculator through a set of device nodes under /dev. The
528 main advantage of this driver is that you don't have to be root
529 to use this precise link cable (depending on the permissions on
530 the device nodes, though).
531
532 To compile this driver as a module, choose M here: the
533 module will be called tipar.
534
535 If you don't know what a parallel link cable is or what a Texas
536 Instruments graphing calculator is, then you probably don't need this
537 driver.
538
539 If unsure, say N.
540
541config HVC_CONSOLE
542 bool "pSeries Hypervisor Virtual Console support"
543 depends on PPC_PSERIES
544 help
545 pSeries machines when partitioned support a hypervisor virtual
546 console. This driver allows each pSeries partition to have a console
547 which is accessed via the HMC.
548
549config HVCS
550 tristate "IBM Hypervisor Virtual Console Server support"
551 depends on PPC_PSERIES
552 help
553 Partitionable IBM Power5 ppc64 machines allow hosting of
554 firmware virtual consoles from one Linux partition by
555 another Linux partition. This driver allows console data
556 from Linux partitions to be accessed through TTY device
557 interfaces in the device tree of a Linux partition running
558 this driver.
559
560 To compile this driver as a module, choose M here: the
561 module will be called hvcs.ko. Additionally, this module
562 will depend on arch specific APIs exported from hvcserver.ko
563 which will also be compiled when this driver is built as a
564 module.
565
566source "drivers/char/ipmi/Kconfig"
567
568source "drivers/char/watchdog/Kconfig"
569
570config DS1620
571 tristate "NetWinder thermometer support"
572 depends on ARCH_NETWINDER
573 help
574 Say Y here to include support for the thermal management hardware
575 found in the NetWinder. This driver allows the user to control the
576 temperature set points and to read the current temperature.
577
578 It is also possible to say M here to build it as a module (ds1620)
579 It is recommended to be used on a NetWinder, but it is not a
580 necessity.
581
582config NWBUTTON
583 tristate "NetWinder Button"
584 depends on ARCH_NETWINDER
585 ---help---
586 If you say Y here and create a character device node /dev/nwbutton
587 with major and minor numbers 10 and 158 ("man mknod"), then every
588 time the orange button is pressed a number of times, the number of
589 times the button was pressed will be written to that device.
590
591 This is most useful for applications, as yet unwritten, which
592 perform actions based on how many times the button is pressed in a
593 row.
594
595 Do not hold the button down for too long, as the driver does not
596 alter the behaviour of the hardware reset circuitry attached to the
597 button; it will still execute a hard reset if the button is held
598 down for longer than approximately five seconds.
599
600 To compile this driver as a module, choose M here: the
601 module will be called nwbutton.
602
603 Most people will answer Y to this question and "Reboot Using Button"
604 below to be able to initiate a system shutdown from the button.
605
606config NWBUTTON_REBOOT
607 bool "Reboot Using Button"
608 depends on NWBUTTON
609 help
610 If you say Y here, then you will be able to initiate a system
611 shutdown and reboot by pressing the orange button a number of times.
612 The number of presses to initiate the shutdown is two by default,
613 but this can be altered by modifying the value of NUM_PRESSES_REBOOT
614 in nwbutton.h and recompiling the driver or, if you compile the
615 driver as a module, you can specify the number of presses at load
616 time with "insmod button reboot_count=<something>".
617
618config NWFLASH
619 tristate "NetWinder flash support"
620 depends on ARCH_NETWINDER
621 ---help---
622 If you say Y here and create a character device /dev/flash with
623 major 10 and minor 160 you can manipulate the flash ROM containing
624 the NetWinder firmware. Be careful as accidentally overwriting the
625 flash contents can render your computer unbootable. On no account
626 allow random users access to this device. :-)
627
628 To compile this driver as a module, choose M here: the
629 module will be called nwflash.
630
631 If you're not sure, say N.
632
633config HW_RANDOM
634 tristate "Intel/AMD/VIA HW Random Number Generator support"
635 depends on (X86 || IA64) && PCI
636 ---help---
637 This driver provides kernel-side support for the Random Number
638 Generator hardware found on Intel i8xx-based motherboards,
639 AMD 76x-based motherboards, and Via Nehemiah CPUs.
640
641 Provides a character driver, used to read() entropy data.
642
643 To compile this driver as a module, choose M here: the
644 module will be called hw_random.
645
646 If unsure, say N.
647
648config NVRAM
649 tristate "/dev/nvram support"
650 depends on ATARI || X86 || X86_64 || ARM || GENERIC_NVRAM
651 ---help---
652 If you say Y here and create a character special file /dev/nvram
653 with major number 10 and minor number 144 using mknod ("man mknod"),
654 you get read and write access to the extra bytes of non-volatile
655 memory in the real time clock (RTC), which is contained in every PC
656 and most Ataris. The actual number of bytes varies, depending on the
657 nvram in the system, but is usually 114 (128-14 for the RTC).
658
659 This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
660 on Ataris. /dev/nvram may be used to view settings there, or to
661 change them (with some utility). It could also be used to frequently
662 save a few bits of very important data that may not be lost over
663 power-off and for which writing to disk is too insecure. Note
664 however that most NVRAM space in a PC belongs to the BIOS and you
665 should NEVER idly tamper with it. See Ralf Brown's interrupt list
666 for a guide to the use of CMOS bytes by your BIOS.
667
668 On Atari machines, /dev/nvram is always configured and does not need
669 to be selected.
670
671 To compile this driver as a module, choose M here: the
672 module will be called nvram.
673
674config RTC
675 tristate "Enhanced Real Time Clock Support"
676 depends on !PPC32 && !PARISC && !IA64 && !M68K
677 ---help---
678 If you say Y here and create a character special file /dev/rtc with
679 major number 10 and minor number 135 using mknod ("man mknod"), you
680 will get access to the real time clock (or hardware clock) built
681 into your computer.
682
683 Every PC has such a clock built in. It can be used to generate
684 signals from as low as 1Hz up to 8192Hz, and can also be used
685 as a 24 hour alarm. It reports status information via the file
686 /proc/driver/rtc and its behaviour is set by various ioctls on
687 /dev/rtc.
688
689 If you run Linux on a multiprocessor machine and said Y to
690 "Symmetric Multi Processing" above, you should say Y here to read
691 and set the RTC in an SMP compatible fashion.
692
693 If you think you have a use for such a device (such as periodic data
694 sampling), then say Y here, and read <file:Documentation/rtc.txt>
695 for details.
696
697 To compile this driver as a module, choose M here: the
698 module will be called rtc.
699
700config SGI_DS1286
701 tristate "SGI DS1286 RTC support"
702 depends on SGI_IP22
703 help
704 If you say Y here and create a character special file /dev/rtc with
705 major number 10 and minor number 135 using mknod ("man mknod"), you
706 will get access to the real time clock built into your computer.
707 Every SGI has such a clock built in. It reports status information
708 via the file /proc/rtc and its behaviour is set by various ioctls on
709 /dev/rtc.
710
711config SGI_IP27_RTC
712 bool "SGI M48T35 RTC support"
713 depends on SGI_IP27
714 help
715 If you say Y here and create a character special file /dev/rtc with
716 major number 10 and minor number 135 using mknod ("man mknod"), you
717 will get access to the real time clock built into your computer.
718 Every SGI has such a clock built in. It reports status information
719 via the file /proc/rtc and its behaviour is set by various ioctls on
720 /dev/rtc.
721
722config GEN_RTC
723 tristate "Generic /dev/rtc emulation"
724 depends on RTC!=y && !IA64 && !ARM
725 ---help---
726 If you say Y here and create a character special file /dev/rtc with
727 major number 10 and minor number 135 using mknod ("man mknod"), you
728 will get access to the real time clock (or hardware clock) built
729 into your computer.
730
731 It reports status information via the file /proc/driver/rtc and its
732 behaviour is set by various ioctls on /dev/rtc. If you enable the
733 "extended RTC operation" below it will also provide an emulation
734 for RTC_UIE which is required by some programs and may improve
735 precision in some cases.
736
737 To compile this driver as a module, choose M here: the
738 module will be called genrtc.
739
740config GEN_RTC_X
741 bool "Extended RTC operation"
742 depends on GEN_RTC
743 help
744 Provides an emulation for RTC_UIE which is required by some programs
745 and may improve precision of the generic RTC support in some cases.
746
747config EFI_RTC
748 bool "EFI Real Time Clock Services"
749 depends on IA64
750
751config DS1302
752 tristate "DS1302 RTC support"
753 depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
754 help
755 If you say Y here and create a character special file /dev/rtc with
756 major number 121 and minor number 0 using mknod ("man mknod"), you
757 will get access to the real time clock (or hardware clock) built
758 into your computer.
759
760config S3C2410_RTC
761 bool "S3C2410 RTC Driver"
762 depends on ARCH_S3C2410
763 help
764 RTC (Realtime Clock) driver for the clock inbuilt into the
765 Samsung S3C2410. This can provide periodic interrupt rates
766 from 1Hz to 64Hz for user programs, and wakeup from Alarm.
767
768config RTC_VR41XX
769 tristate "NEC VR4100 series Real Time Clock Support"
770 depends on CPU_VR41XX
771
772config COBALT_LCD
773 bool "Support for Cobalt LCD"
774 depends on MIPS_COBALT
775 help
776 This option enables support for the LCD display and buttons found
777 on Cobalt systems through a misc device.
778
779config DTLK
780 tristate "Double Talk PC internal speech card support"
781 help
782 This driver is for the DoubleTalk PC, a speech synthesizer
783 manufactured by RC Systems (<http://www.rcsys.com/>). It is also
784 called the `internal DoubleTalk'.
785
786 To compile this driver as a module, choose M here: the
787 module will be called dtlk.
788
789config R3964
790 tristate "Siemens R3964 line discipline"
791 ---help---
792 This driver allows synchronous communication with devices using the
793 Siemens R3964 packet protocol. Unless you are dealing with special
794 hardware like PLCs, you are unlikely to need this.
795
796 To compile this driver as a module, choose M here: the
797 module will be called n_r3964.
798
799 If unsure, say N.
800
801config APPLICOM
802 tristate "Applicom intelligent fieldbus card support"
803 depends on PCI
804 ---help---
805 This driver provides the kernel-side support for the intelligent
806 fieldbus cards made by Applicom International. More information
807 about these cards can be found on the WWW at the address
808 <http://www.applicom-int.com/>, or by email from David Woodhouse
809 <dwmw2@infradead.org>.
810
811 To compile this driver as a module, choose M here: the
812 module will be called applicom.
813
814 If unsure, say N.
815
816config SONYPI
817 tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)"
818 depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT
819 ---help---
820 This driver enables access to the Sony Programmable I/O Control
821 Device which can be found in many (all ?) Sony Vaio laptops.
822
823 If you have one of those laptops, read
824 <file:Documentation/sonypi.txt>, and say Y or M here.
825
826 To compile this driver as a module, choose M here: the
827 module will be called sonypi.
828
829config TANBAC_TB0219
830 tristate "TANBAC TB0219 base board support"
831 depends TANBAC_TB0229
832
833
834menu "Ftape, the floppy tape device driver"
835
836config FTAPE
837 tristate "Ftape (QIC-80/Travan) support"
838 depends on BROKEN_ON_SMP && (ALPHA || X86)
839 ---help---
840 If you have a tape drive that is connected to your floppy
841 controller, say Y here.
842
843 Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
844 "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
845 controller of their own. These drives (and their companion
846 controllers) are also supported if you say Y here.
847
848 If you have a special controller (such as the CMS FC-10, FC-20,
849 Mountain Mach-II, or any controller that is based on the Intel 82078
850 FDC like the high speed controllers by Seagate and Exabyte and
851 Iomega's "Ditto Dash") you must configure it by selecting the
852 appropriate entries from the "Floppy tape controllers" sub-menu
853 below and possibly modify the default values for the IRQ and DMA
854 channel and the IO base in ftape's configuration menu.
855
856 If you want to use your floppy tape drive on a PCI-bus based system,
857 please read the file <file:drivers/char/ftape/README.PCI>.
858
859 The ftape kernel driver is also available as a runtime loadable
860 module. To compile this driver as a module, choose M here: the
861 module will be called ftape.
862
863 Note that the Ftape-HOWTO is out of date (sorry) and documents the
864 older version 2.08 of this software but still contains useful
865 information. There is a web page with more recent documentation at
866 <http://www.instmath.rwth-aachen.de/~heine/ftape/>. This page
867 always contains the latest release of the ftape driver and useful
868 information (backup software, ftape related patches and
869 documentation, FAQ). Note that the file system interface has
870 changed quite a bit compared to previous versions of ftape. Please
871 read <file:Documentation/ftape.txt>.
872
873source "drivers/char/ftape/Kconfig"
874
875endmenu
876
877source "drivers/char/agp/Kconfig"
878
879source "drivers/char/drm/Kconfig"
880
881source "drivers/char/pcmcia/Kconfig"
882
883config MWAVE
884 tristate "ACP Modem (Mwave) support"
885 depends on X86
886 select SERIAL_8250
887 ---help---
888 The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
889 kernel driver and a user level application. Together these components
890 support direct attachment to public switched telephone networks (PSTNs)
891 and support selected world wide countries.
892
893 This version of the ACP Modem driver supports the IBM Thinkpad 600E,
894 600, and 770 that include on board ACP modem hardware.
895
896 The modem also supports the standard communications port interface
897 (ttySx) and is compatible with the Hayes AT Command Set.
898
899 The user level application needed to use this driver can be found at
900 the IBM Linux Technology Center (LTC) web site:
901 <http://www.ibm.com/linux/ltc/>.
902
903 If you own one of the above IBM Thinkpads which has the Mwave chipset
904 in it, say Y.
905
906 To compile this driver as a module, choose M here: the
907 module will be called mwave.
908
909config SCx200_GPIO
910 tristate "NatSemi SCx200 GPIO Support"
911 depends on SCx200
912 help
913 Give userspace access to the GPIO pins on the National
914 Semiconductor SCx200 processors.
915
916 If compiled as a module, it will be called scx200_gpio.
917
918config RAW_DRIVER
919 tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
920 help
921 The raw driver permits block devices to be bound to /dev/raw/rawN.
922 Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
923 See the raw(8) manpage for more details.
924
925 The raw driver is deprecated and may be removed from 2.7
926 kernels. Applications should simply open the device (eg /dev/hda1)
927 with the O_DIRECT flag.
928
929config HPET
930 bool "HPET - High Precision Event Timer" if (X86 || IA64)
931 default n
932 depends on ACPI
933 help
934 If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
935 open selects one of the timers supported by the HPET. The timers are
936 non-periodioc and/or periodic.
937
938config HPET_RTC_IRQ
939 bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
940 default n
941 depends on HPET
942 help
943 If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It
944 is assumed the platform called hpet_alloc with the RTC IRQ values for
945 the HPET timers.
946
947config HPET_MMAP
948 bool "Allow mmap of HPET"
949 default y
950 depends on HPET
951 help
952 If you say Y here, user applications will be able to mmap
953 the HPET registers.
954
955 In some hardware implementations, the page containing HPET
956 registers may also contain other things that shouldn't be
957 exposed to the user. If this applies to your hardware,
958 say N here.
959
960config MAX_RAW_DEVS
961 int "Maximum number of RAW devices to support (1-8192)"
962 depends on RAW_DRIVER
963 default "256"
964 help
965 The maximum number of RAW devices that are supported.
966 Default is 256. Increase this number in case you need lots of
967 raw devices.
968
969config HANGCHECK_TIMER
970 tristate "Hangcheck timer"
971 depends on X86_64 || X86
972 help
973 The hangcheck-timer module detects when the system has gone
974 out to lunch past a certain margin. It can reboot the system
975 or merely print a warning.
976
977config MMTIMER
978 tristate "MMTIMER Memory mapped RTC for SGI Altix"
979 depends on IA64_GENERIC || IA64_SGI_SN2
980 default y
981 help
982 The mmtimer device allows direct userspace access to the
983 Altix system timer.
984
985source "drivers/char/tpm/Kconfig"
986
987endmenu
988