Remove legacy CDROM drivers

They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 0 insertions, 213 deletions

diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
deleted file mode 100644
index 4b12e9031fb3..000000000000
--- a/drivers/cdrom/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# CDROM driver configuration
-#
-
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
-        depends on ISA && BLOCK
-
-config CD_NO_IDESCSI
-        bool "Support non-SCSI/IDE/ATAPI CDROM drives"
-        ---help---
-          If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
-          here, otherwise N. Read the CD-ROM-HOWTO, available from
-          <http://www.tldp.org/docs.html#howto>.
-
-          Note that the answer to this question doesn't directly affect the
-          kernel: saying N will just cause the configurator to skip all
-          the questions about these CD-ROM drives. If you are unsure what you
-          have, say Y and find out whether you have one of the following
-          drives.
-
-          For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
-          exists. Especially in cases where you do not know exactly which kind
-          of drive you have you should read there. Most of these drivers use a
-          file drivers/cdrom/{driver_name}.h where you can define your
-          interface parameters and switch some internal goodies.
-
-          To compile these CD-ROM drivers as a module, choose M instead of Y.
-
-          If you want to use any of these CD-ROM drivers, you also have to
-          answer Y or M to "ISO 9660 CD-ROM file system support" below (this
-          answer will get "defaulted" for you if you enable any of the Linux
-          CD-ROM drivers).
-
-config AZTCD
-        tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support"
-        depends on CD_NO_IDESCSI
-        ---help---
-          This is your driver if you have an Aztech CDA268-01A, Orchid
-          CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
-          CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
-          drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
-          as Aztech CDA269-031SE. Please read the file
-          <file:Documentation/cdrom/aztcd>.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called aztcd.
-
-config GSCD
-        tristate "Goldstar R420 CDROM support"
-        depends on CD_NO_IDESCSI
-        ---help---
-          If this is your CD-ROM drive, say Y here.  As described in the file
-          <file:Documentation/cdrom/gscd>, you might have to change a setting
-          in the file <file:drivers/cdrom/gscd.h> before compiling the
-          kernel.  Please read the file <file:Documentation/cdrom/gscd>.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called gscd.
-
-config SBPCD
-        tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
-        depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-        ---help---
-          This driver supports most of the drives which use the Panasonic or
-          Sound Blaster interface.  Please read the file
-          <file:Documentation/cdrom/sbpcd>.
-
-          The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
-          (sometimes labeled "Creative"), the Creative Labs CD200, the
-          Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
-          model), the TEAC CD-55A fall under this category.  Some other
-          "electrically compatible" drives (Vertos, Genoa, some Funai models)
-          are currently not supported; for the Sanyo H94A drive currently a
-          separate driver (asked later) is responsible.  Most drives have a
-          uniquely shaped faceplate, with a caddyless motorized drawer, but
-          without external brand markings.  The older CR-52x drives have a
-          caddy and manual loading/eject, but still no external markings.  The
-          driver is able to do an extended auto-probing for interface
-          addresses and drive types; this can help to find facts in cases you
-          are not sure, but can consume some time during the boot process if
-          none of the supported drives gets found.  Once your drive got found,
-          you should enter the reported parameters into
-          <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
-          This driver can support up to four CD-ROM controller cards, and each
-          card can support up to four CD-ROM drives; if you say Y here, you
-          will be asked how many controller cards you have.  If compiled as a
-          module, only one controller card (but with up to four drives) is
-          usable.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called sbpcd.
-
-config MCDX
-        tristate "Mitsumi CDROM support"
-        depends on CD_NO_IDESCSI
-        ---help---
-          Use this driver if you want to be able to use your Mitsumi LU-005,
-          FX-001 or FX-001D CD-ROM drive.
-
-          Please read the file <file:Documentation/cdrom/mcdx>.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called mcdx.
-
-config OPTCD
-        tristate "Optics Storage DOLPHIN 8000AT CDROM support"
-        depends on CD_NO_IDESCSI
-        ---help---
-          This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
-          compatible interface. It also works with the Lasermate CR328A. If
-          you have one of those, say Y. This driver does not work for the
-          Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
-          one. Please read the file <file:Documentation/cdrom/optcd>.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called optcd.
-
-config CM206
-        tristate "Philips/LMS CM206 CDROM support"
-        depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-        ---help---
-          If you have a Philips/LMS CD-ROM drive cm206 in combination with a
-          cm260 host adapter card, say Y here. Please also read the file
-          <file:Documentation/cdrom/cm206>.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called cm206.
-
-config SJCD
-        tristate "Sanyo CDR-H94A CDROM support"
-        depends on CD_NO_IDESCSI
-        help
-          If this is your CD-ROM drive, say Y here and read the file
-          <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
-          "ISO 9660 CD-ROM file system support" below, because that's the
-          file system used on CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called sjcd.
-
-config ISP16_CDI
-        tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
-        depends on CD_NO_IDESCSI
-        ---help---
-          These are sound cards with built-in cdrom interfaces using the OPTi
-          82C928 or 82C929 chips. Say Y here to have them detected and
-          possibly configured at boot time. In addition, You'll have to say Y
-          to a driver for the particular cdrom drive you have attached to the
-          card. Read <file:Documentation/cdrom/isp16> for details.
-
-          To compile this driver as a module, choose M here: the
-          module will be called isp16.
-
-config CDU31A
-        tristate "Sony CDU31A/CDU33A CDROM support"
-        depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-        ---help---
-          These CD-ROM drives have a spring-pop-out caddyless drawer, and a
-          rectangular green LED centered beneath it.  NOTE: these CD-ROM
-          drives will not be auto detected by the kernel at boot time; you
-          have to provide the interface address as an option to the kernel at
-          boot time as described in <file:Documentation/cdrom/cdu31a> or fill
-          in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
-          bootparam" or see the documentation of your boot loader (lilo or
-          loadlin) about how to pass options to the kernel.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called cdu31a.
-
-config CDU535
-        tristate "Sony CDU535 CDROM support"
-        depends on CD_NO_IDESCSI
-        ---help---
-          This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
-          drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
-          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-          file system support" below, because that's the file system used on
-          CD-ROMs.
-
-          To compile this driver as a module, choose M here: the
-          module will be called sonycd535.
-
-endmenu