Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 213 insertions, 0 deletions

diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
new file mode 100644
index 000000000000..ff5652d40619
--- /dev/null
+++ b/drivers/cdrom/Kconfig
@@ -0,0 +1,213 @@
+#
+# CDROM driver configuration
+#
+
+menu "Old CD-ROM drivers (not SCSI, not IDE)"
+        depends on ISA
+
+config CD_NO_IDESCSI
+        bool "Support non-SCSI/IDE/ATAPI CDROM drives"
+        ---help---
+          If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
+          here, otherwise N. Read the CD-ROM-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          Note that the answer to this question doesn't directly affect the
+          kernel: saying N will just cause the configurator to skip all
+          the questions about these CD-ROM drives. If you are unsure what you
+          have, say Y and find out whether you have one of the following
+          drives.
+
+          For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
+          exists. Especially in cases where you do not know exactly which kind
+          of drive you have you should read there. Most of these drivers use a
+          file drivers/cdrom/{driver_name}.h where you can define your
+          interface parameters and switch some internal goodies.
+
+          To compile these CD-ROM drivers as a module, choose M instead of Y.
+
+          If you want to use any of these CD-ROM drivers, you also have to
+          answer Y or M to "ISO 9660 CD-ROM file system support" below (this
+          answer will get "defaulted" for you if you enable any of the Linux
+          CD-ROM drivers).
+
+config AZTCD
+        tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support"
+        depends on CD_NO_IDESCSI
+        ---help---
+          This is your driver if you have an Aztech CDA268-01A, Orchid
+          CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
+          CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
+          drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
+          as Aztech CDA269-031SE. Please read the file
+          <file:Documentation/cdrom/aztcd>.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called aztcd.
+
+config GSCD
+        tristate "Goldstar R420 CDROM support"
+        depends on CD_NO_IDESCSI
+        ---help---
+          If this is your CD-ROM drive, say Y here.  As described in the file
+          <file:Documentation/cdrom/gscd>, you might have to change a setting
+          in the file <file:drivers/cdrom/gscd.h> before compiling the
+          kernel.  Please read the file <file:Documentation/cdrom/gscd>.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called gscd.
+
+config SBPCD
+        tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
+        depends on CD_NO_IDESCSI && BROKEN_ON_SMP
+        ---help---
+          This driver supports most of the drives which use the Panasonic or
+          Sound Blaster interface.  Please read the file
+          <file:Documentation/cdrom/sbpcd>.
+
+          The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
+          (sometimes labeled "Creative"), the Creative Labs CD200, the
+          Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
+          model), the TEAC CD-55A fall under this category.  Some other
+          "electrically compatible" drives (Vertos, Genoa, some Funai models)
+          are currently not supported; for the Sanyo H94A drive currently a
+          separate driver (asked later) is responsible.  Most drives have a
+          uniquely shaped faceplate, with a caddyless motorized drawer, but
+          without external brand markings.  The older CR-52x drives have a
+          caddy and manual loading/eject, but still no external markings.  The
+          driver is able to do an extended auto-probing for interface
+          addresses and drive types; this can help to find facts in cases you
+          are not sure, but can consume some time during the boot process if
+          none of the supported drives gets found.  Once your drive got found,
+          you should enter the reported parameters into
+          <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
+
+          This driver can support up to four CD-ROM controller cards, and each
+          card can support up to four CD-ROM drives; if you say Y here, you
+          will be asked how many controller cards you have.  If compiled as a
+          module, only one controller card (but with up to four drives) is
+          usable.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called sbpcd.
+
+config MCDX
+        tristate "Mitsumi CDROM support"
+        depends on CD_NO_IDESCSI
+        ---help---
+          Use this driver if you want to be able to use your Mitsumi LU-005,
+          FX-001 or FX-001D CD-ROM drive.
+
+          Please read the file <file:Documentation/cdrom/mcdx>.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mcdx.
+
+config OPTCD
+        tristate "Optics Storage DOLPHIN 8000AT CDROM support"
+        depends on CD_NO_IDESCSI
+        ---help---
+          This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
+          compatible interface. It also works with the Lasermate CR328A. If
+          you have one of those, say Y. This driver does not work for the
+          Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
+          one. Please read the file <file:Documentation/cdrom/optcd>.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called optcd.
+
+config CM206
+        tristate "Philips/LMS CM206 CDROM support"
+        depends on CD_NO_IDESCSI && BROKEN_ON_SMP
+        ---help---
+          If you have a Philips/LMS CD-ROM drive cm206 in combination with a
+          cm260 host adapter card, say Y here. Please also read the file
+          <file:Documentation/cdrom/cm206>.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cm206.
+
+config SJCD
+        tristate "Sanyo CDR-H94A CDROM support"
+        depends on CD_NO_IDESCSI
+        help
+          If this is your CD-ROM drive, say Y here and read the file
+          <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
+          "ISO 9660 CD-ROM file system support" below, because that's the
+          file system used on CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called sjcd.
+
+config ISP16_CDI
+        tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
+        depends on CD_NO_IDESCSI
+        ---help---
+          These are sound cards with built-in cdrom interfaces using the OPTi
+          82C928 or 82C929 chips. Say Y here to have them detected and
+          possibly configured at boot time. In addition, You'll have to say Y
+          to a driver for the particular cdrom drive you have attached to the
+          card. Read <file:Documentation/cdrom/isp16> for details.
+
+          To compile this driver as a module, choose M here: the
+          module will be called isp16.
+
+config CDU31A
+        tristate "Sony CDU31A/CDU33A CDROM support"
+        depends on CD_NO_IDESCSI && BROKEN_ON_SMP
+        ---help---
+          These CD-ROM drives have a spring-pop-out caddyless drawer, and a
+          rectangular green LED centered beneath it.  NOTE: these CD-ROM
+          drives will not be auto detected by the kernel at boot time; you
+          have to provide the interface address as an option to the kernel at
+          boot time as described in <file:Documentation/cdrom/cdu31a> or fill
+          in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
+          bootparam" or see the documentation of your boot loader (lilo or
+          loadlin) about how to pass options to the kernel.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called cdu31a.
+
+config CDU535
+        tristate "Sony CDU535 CDROM support"
+        depends on CD_NO_IDESCSI
+        ---help---
+          This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
+          drives. Please read the file <file:Documentation/cdrom/sonycd535>.
+
+          If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
+          file system support" below, because that's the file system used on
+          CD-ROMs.
+
+          To compile this driver as a module, choose M here: the
+          module will be called sonycd535.
+
+endmenu