Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 151 insertions, 0 deletions

diff --git a/drivers/block/paride/fit2.c b/drivers/block/paride/fit2.c
new file mode 100644
index 000000000000..e0f0691d8bc2
--- /dev/null
+++ b/drivers/block/paride/fit2.c
@@ -0,0 +1,151 @@
+/* 
+        fit2.c        (c) 1998  Grant R. Guenther <grant@torque.net>
+                          Under the terms of the GNU General Public License.
+
+        fit2.c is a low-level protocol driver for the older version
+        of the Fidelity International Technology parallel port adapter.  
+        This adapter is used in their TransDisk 2000 and older TransDisk
+        3000 portable hard-drives.  As far as I can tell, this device
+        supports 4-bit mode _only_.  
+
+        Newer models of the FIT products use an enhanced protocol.
+        The "fit3" protocol module should support current drives.
+
+*/
+
+#define FIT2_VERSION      "1.0"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+
+NB:  The FIT adapter does not appear to use the control registers.
+So, we map ALT_STATUS to STATUS and NO-OP writes to the device
+control register - this means that IDE reset will not work on these
+devices.
+
+*/
+
+static void  fit2_write_regr( PIA *pi, int cont, int regr, int val)
+
+{       if (cont == 1) return;
+        w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
+}
+
+static int fit2_read_regr( PIA *pi, int cont, int regr )
+
+{       int  a, b, r;
+
+        if (cont) {
+          if (regr != 6) return 0xff;
+          r = 7;
+        } else r = regr + 0x10;
+
+        w2(0xc); w0(r); w2(4); w2(5); 
+                 w0(0); a = r1();
+                 w0(1); b = r1();
+        w2(4);
+
+        return j44(a,b);
+
+}
+
+static void fit2_read_block( PIA *pi, char * buf, int count )
+
+{       int  k, a, b, c, d;
+
+        w2(0xc); w0(0x10);
+
+        for (k=0;k<count/4;k++) {
+
+                w2(4); w2(5);
+                w0(0); a = r1(); w0(1); b = r1();
+                w0(3); c = r1(); w0(2); d = r1(); 
+                buf[4*k+0] = j44(a,b);
+                buf[4*k+1] = j44(d,c);
+
+                w2(4); w2(5);
+                       a = r1(); w0(3); b = r1();
+                w0(1); c = r1(); w0(0); d = r1(); 
+                buf[4*k+2] = j44(d,c);
+                buf[4*k+3] = j44(a,b);
+
+        }
+
+        w2(4);
+
+}
+
+static void fit2_write_block( PIA *pi, char * buf, int count )
+
+{       int k;
+
+
+        w2(0xc); w0(0); 
+        for (k=0;k<count/2;k++) {
+                w2(4); w0(buf[2*k]); 
+                w2(5); w0(buf[2*k+1]);
+        }
+        w2(4);
+}
+
+static void fit2_connect ( PIA *pi  )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+        w2(0xcc); 
+}
+
+static void fit2_disconnect ( PIA *pi )
+
+{       w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
+                pi->device,FIT2_VERSION,pi->port,pi->delay);
+
+}
+
+static struct pi_protocol fit2 = {
+        .owner          = THIS_MODULE,
+        .name           = "fit2",
+        .max_mode       = 1,
+        .epp_first      = 2,
+        .default_delay  = 1,
+        .max_units      = 1,
+        .write_regr     = fit2_write_regr,
+        .read_regr      = fit2_read_regr,
+        .write_block    = fit2_write_block,
+        .read_block     = fit2_read_block,
+        .connect        = fit2_connect,
+        .disconnect     = fit2_disconnect,
+        .log_adapter    = fit2_log_adapter,
+};
+
+static int __init fit2_init(void)
+{
+        return pi_register(&fit2)-1;
+}
+
+static void __exit fit2_exit(void)
+{
+        pi_unregister(&fit2);
+}
+
+MODULE_LICENSE("GPL");
+module_init(fit2_init)
+module_exit(fit2_exit)