Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 340 insertions, 0 deletions

diff --git a/drivers/block/paride/epat.c b/drivers/block/paride/epat.c
new file mode 100644
index 000000000000..55d1c0a1fb90
--- /dev/null
+++ b/drivers/block/paride/epat.c
@@ -0,0 +1,340 @@
+/* 
+        epat.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                            Under the terms of the GNU General Public License.
+
+        This is the low level protocol driver for the EPAT parallel
+        to IDE adapter from Shuttle Technologies.  This adapter is
+        used in many popular parallel port disk products such as the
+        SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
+        
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+        1.02    Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
+
+*/
+
+#define EPAT_VERSION      "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b)                (((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b)                (((a>>3)&0x1f)+((b<<4)&0xe0))
+
+static int epatc8;
+
+module_param(epatc8, int, 0);
+MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
+        "used in any recent Imation SuperDisk (LS-120) drive.");
+
+/* cont =  0   IDE register file
+   cont =  1   IDE control registers
+   cont =  2   internal EPAT registers
+*/
+
+static int cont_map[3] = { 0x18, 0x10, 0 };
+
+static void epat_write_regr( PIA *pi, int cont, int regr, int val)
+
+{       int r;
+
+        r = regr + cont_map[cont];
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1:
+        case 2: w0(0x60+r); w2(1); w0(val); w2(4);
+                break;
+
+        case 3:
+        case 4:
+        case 5: w3(0x40+r); w4(val);
+                break;
+
+        }
+}
+
+static int epat_read_regr( PIA *pi, int cont, int regr )
+
+{       int  a, b, r;
+
+        r = regr + cont_map[cont];
+
+        switch (pi->mode) {
+
+        case 0: w0(r); w2(1); w2(3); 
+                a = r1(); w2(4); b = r1();
+                return j44(a,b);
+
+        case 1: w0(0x40+r); w2(1); w2(4);
+                a = r1(); b = r2(); w0(0xff);
+                return j53(a,b);
+
+        case 2: w0(0x20+r); w2(1); w2(0x25);
+                a = r0(); w2(4);
+                return a;
+
+        case 3:
+        case 4:
+        case 5: w3(r); w2(0x24); a = r4(); w2(4);
+                return a;
+
+        }
+        return -1;      /* never gets here */
+}
+
+static void epat_read_block( PIA *pi, char * buf, int count )
+
+{       int  k, ph, a, b;
+
+        switch (pi->mode) {
+
+        case 0: w0(7); w2(1); w2(3); w0(0xff);
+                ph = 0;
+                for(k=0;k<count;k++) {
+                        if (k == count-1) w0(0xfd);
+                        w2(6+ph); a = r1();
+                        if (a & 8) b = a; 
+                          else { w2(4+ph); b = r1(); }
+                        buf[k] = j44(a,b);
+                        ph =  1 - ph;
+                }
+                w0(0); w2(4);
+                break;
+
+        case 1: w0(0x47); w2(1); w2(5); w0(0xff);
+                ph = 0;
+                for(k=0;k<count;k++) {
+                        if (k == count-1) w0(0xfd); 
+                        w2(4+ph);
+                        a = r1(); b = r2();
+                        buf[k] = j53(a,b);
+                        ph = 1 - ph;
+                }
+                w0(0); w2(4);
+                break;
+
+        case 2: w0(0x27); w2(1); w2(0x25); w0(0);
+                ph = 0;
+                for(k=0;k<count-1;k++) {
+                        w2(0x24+ph);
+                        buf[k] = r0();
+                        ph = 1 - ph;
+                }
+                w2(0x26); w2(0x27); buf[count-1] = r0(); 
+                w2(0x25); w2(4);
+                break;
+
+        case 3: w3(0x80); w2(0x24);
+                for(k=0;k<count-1;k++) buf[k] = r4();
+                w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+                w2(4);
+                break;
+
+        case 4: w3(0x80); w2(0x24);
+                for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+                buf[count-2] = r4();
+                w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+                w2(4);
+                break;
+
+        case 5: w3(0x80); w2(0x24);
+                for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+                for(k=count-4;k<count-1;k++) buf[k] = r4();
+                w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+                w2(4);
+                break;
+
+        }
+}
+
+static void epat_write_block( PIA *pi, char * buf, int count )   
+
+{       int ph, k;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1:
+        case 2: w0(0x67); w2(1); w2(5);
+                ph = 0;
+                for(k=0;k<count;k++) {
+                        w0(buf[k]);
+                        w2(4+ph);
+                        ph = 1 - ph;
+                }
+                w2(7); w2(4);
+                break;
+
+        case 3: w3(0xc0); 
+                for(k=0;k<count;k++) w4(buf[k]);
+                w2(4);
+                break;
+
+        case 4: w3(0xc0); 
+                for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
+                w2(4);
+                break;
+
+        case 5: w3(0xc0); 
+                for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
+                w2(4);
+                break;
+
+        }
+}
+
+/* these macros access the EPAT registers in native addressing */
+
+#define WR(r,v)         epat_write_regr(pi,2,r,v)
+#define RR(r)           (epat_read_regr(pi,2,r))
+
+/* and these access the IDE task file */
+
+#define WRi(r,v)         epat_write_regr(pi,0,r,v)
+#define RRi(r)           (epat_read_regr(pi,0,r))
+
+/* FIXME:  the CPP stuff should be fixed to handle multiple EPATs on a chain */
+
+#define CPP(x)  w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+                w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void epat_connect ( PIA *pi )
+
+{       pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+        /* Initialize the chip */
+        CPP(0);
+
+        if (epatc8) {
+                CPP(0x40);CPP(0xe0);
+                w0(0);w2(1);w2(4);
+                WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
+                WR(0xe,0xf);WR(0xf,4);
+                /* WR(0xe,0xa);WR(0xf,4); */
+                WR(0xe,0xd);WR(0xf,0);
+                /* CPP(0x30); */
+        }
+
+        /* Connect to the chip */
+        CPP(0xe0);
+        w0(0);w2(1);w2(4); /* Idle into SPP */
+        if (pi->mode >= 3) {
+          w0(0);w2(1);w2(4);w2(0xc);
+          /* Request EPP */
+          w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
+        }
+
+        if (!epatc8) {
+                WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
+        }
+}
+
+static void epat_disconnect (PIA *pi)
+{       CPP(0x30);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+}
+
+static int epat_test_proto( PIA *pi, char * scratch, int verbose )
+
+{       int     k, j, f, cc;
+        int     e[2] = {0,0};
+
+        epat_connect(pi);
+        cc = RR(0xd);
+        epat_disconnect(pi);
+
+        epat_connect(pi);
+        for (j=0;j<2;j++) {
+            WRi(6,0xa0+j*0x10);
+            for (k=0;k<256;k++) {
+                WRi(2,k^0xaa);
+                WRi(3,k^0x55);
+                if (RRi(2) != (k^0xaa)) e[j]++;
+                }
+            }
+        epat_disconnect(pi);
+
+        f = 0;
+        epat_connect(pi);
+        WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
+        epat_read_block(pi,scratch,512);
+        
+        for (k=0;k<256;k++) {
+            if ((scratch[2*k] & 0xff) != k) f++;
+            if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
+        }
+        epat_disconnect(pi);
+
+        if (verbose)  {
+            printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+                   pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
+        }
+        
+        return (e[0] && e[1]) || f;
+}
+
+static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       int     ver;
+        char    *mode_string[6] = 
+                   {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
+
+        epat_connect(pi);
+        WR(0xa,0x38);           /* read the version code */
+        ver = RR(0xb);
+        epat_disconnect(pi);
+
+        printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
+                pi->device,EPAT_VERSION,ver,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+                mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epat = {
+        .owner          = THIS_MODULE,
+        .name           = "epat",
+        .max_mode       = 6,
+        .epp_first      = 3,
+        .default_delay  = 1,
+        .max_units      = 1,
+        .write_regr     = epat_write_regr,
+        .read_regr      = epat_read_regr,
+        .write_block    = epat_write_block,
+        .read_block     = epat_read_block,
+        .connect        = epat_connect,
+        .disconnect     = epat_disconnect,
+        .test_proto     = epat_test_proto,
+        .log_adapter    = epat_log_adapter,
+};
+
+static int __init epat_init(void)
+{
+#ifdef CONFIG_PARIDE_EPATC8
+        epatc8 = 1;
+#endif
+        return pi_register(&epat)-1;
+}
+
+static void __exit epat_exit(void)
+{
+        pi_unregister(&epat);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epat_init)
+module_exit(epat_exit)