cciss: kernel scan thread for MSA2012

The MSA2012 cannot inform the driver of configuration changes since all
management is out of band.  This is a departure from any storage we have
supported in the past.  We need some way to detect changes on the topology
so we implement this kernel thread.  In some instances there's nothing we
can do from the driver (like LUN failure) so just print out a message.  In
the case where logical volumes are added or deleted we call
rebuild_lun_table to refresh the driver's view of the world.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 23 insertions, 0 deletions

diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index 24e22dea1a99..40b1b92dae7f 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -25,6 +25,29 @@
 #define CMD_TIMEOUT             0x000B
 #define CMD_UNABORTABLE         0x000C
 
+/* Unit Attentions ASC's as defined for the MSA2012sa */
+#define POWER_OR_RESET                  0x29
+#define STATE_CHANGED                   0x2a
+#define UNIT_ATTENTION_CLEARED          0x2f
+#define LUN_FAILED                      0x3e
+#define REPORT_LUNS_CHANGED             0x3f
+
+/* Unit Attentions ASCQ's as defined for the MSA2012sa */
+
+        /* These ASCQ's defined for ASC = POWER_OR_RESET */
+#define POWER_ON_RESET                  0x00
+#define POWER_ON_REBOOT                 0x01
+#define SCSI_BUS_RESET                  0x02
+#define MSA_TARGET_RESET                0x03
+#define CONTROLLER_FAILOVER             0x04
+#define TRANSCEIVER_SE                  0x05
+#define TRANSCEIVER_LVD                 0x06
+
+        /* These ASCQ's defined for ASC = STATE_CHANGED */
+#define RESERVATION_PREEMPTED           0x03
+#define ASYM_ACCESS_CHANGED             0x06
+#define LUN_CAPACITY_CHANGED            0x09
+
 //transfer direction
 #define XFER_NONE               0x00
 #define XFER_WRITE              0x01