cciss: make rebuild_lun_table behave better

This patch makes the rebuild_lun_table smart enough to not rip a logical
volume out from under the OS. Without this fix if a customer is running
hpacucli to monitor their storage the driver will blindly remove and re-add
the disks whenever the utility calls the CCISS_REGNEWD ioctl. Unfortunately,
both hpacucli and ACUXE call the ioctl repeatedly. Customers have reported
IO coming to a standstill. Calling the ioctl is the problem, this patch is
the fix.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 214 insertions, 122 deletions

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index aeaf465922e5..f9f10a15d253 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1330,13 +1330,46 @@ static void cciss_softirq_done(struct request *rq)
         spin_unlock_irqrestore(&h->lock, flags);
 }
 
+/* This function gets the serial number of a logical drive via
+ * inquiry page 0x83.  Serial no. is 16 bytes.  If the serial
+ * number cannot be had, for whatever reason, 16 bytes of 0xff
+ * are returned instead.
+ */
+static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+                                unsigned char *serial_no, int buflen)
+{
+#define PAGE_83_INQ_BYTES 64
+        int rc;
+        unsigned char *buf;
+
+        if (buflen > 16)
+                buflen = 16;
+        memset(serial_no, 0xff, buflen);
+        buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
+        if (!buf)
+                return;
+        memset(serial_no, 0, buflen);
+        if (withirq)
+                rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+                        PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD);
+        else
+                rc = sendcmd(CISS_INQUIRY, ctlr, buf,
+                        PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD);
+        if (rc == IO_OK)
+                memcpy(serial_no, &buf[8], buflen);
+        kfree(buf);
+        return;
+}
+
 /* This function will check the usage_count of the drive to be updated/added.
- * If the usage_count is zero then the drive information will be updated and
- * the disk will be re-registered with the kernel.  If not then it will be
- * left alone for the next reboot.  The exception to this is disk 0 which
- * will always be left registered with the kernel since it is also the
- * controller node.  Any changes to disk 0 will show up on the next
- * reboot.
+ * If the usage_count is zero and it is a heretofore unknown drive, or,
+ * the drive's capacity, geometry, or serial number has changed,
+ * then the drive information will be updated and the disk will be
+ * re-registered with the kernel.  If these conditions don't hold,
+ * then it will be left alone for the next reboot.  The exception to this
+ * is disk 0 which will always be left registered with the kernel since it
+ * is also the controller node.  Any changes to disk 0 will show up on
+ * the next reboot.
  */
 static void cciss_update_drive_info(int ctlr, int drv_index)
 {
@@ -1347,9 +1380,65 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
         sector_t total_size;
         unsigned long flags = 0;
         int ret = 0;
+        drive_info_struct *drvinfo;
+
+        /* Get information about the disk and modify the driver structure */
+        inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+        drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+        if (inq_buff == NULL || drvinfo == NULL)
+                goto mem_msg;
+
+        /* testing to see if 16-byte CDBs are already being used */
+        if (h->cciss_read == CCISS_READ_16) {
+                cciss_read_capacity_16(h->ctlr, drv_index, 1,
+                        &total_size, &block_size);
+
+        } else {
+                cciss_read_capacity(ctlr, drv_index, 1,
+                                    &total_size, &block_size);
+
+                /* if read_capacity returns all F's this volume is >2TB */
+                /* in size so we switch to 16-byte CDB's for all */
+                /* read/write ops */
+                if (total_size == 0xFFFFFFFFULL) {
+                        cciss_read_capacity_16(ctlr, drv_index, 1,
+                        &total_size, &block_size);
+                        h->cciss_read = CCISS_READ_16;
+                        h->cciss_write = CCISS_WRITE_16;
+                } else {
+                        h->cciss_read = CCISS_READ_10;
+                        h->cciss_write = CCISS_WRITE_10;
+                }
+        }
+
+        cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+                               inq_buff, drvinfo);
+        drvinfo->block_size = block_size;
+        drvinfo->nr_blocks = total_size + 1;
+
+        cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+                        sizeof(drvinfo->serial_no));
+
+        /* Is it the same disk we already know, and nothing's changed? */
+        if (h->drv[drv_index].raid_level != -1 &&
+                ((memcmp(drvinfo->serial_no,
+                                h->drv[drv_index].serial_no, 16) == 0) &&
+                drvinfo->block_size == h->drv[drv_index].block_size &&
+                drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
+                drvinfo->heads == h->drv[drv_index].heads &&
+                drvinfo->sectors == h->drv[drv_index].sectors &&
+                drvinfo->cylinders == h->drv[drv_index].cylinders)) {
+                        /* The disk is unchanged, nothing to update */
+                        goto freeret;
+        }
+
+        /* Not the same disk, or something's changed, so we need to */
+        /* deregister it, and re-register it, if it's not in use. */
 
         /* if the disk already exists then deregister it before proceeding */
-        if (h->drv[drv_index].raid_level != -1) {
+        /* (unless it's the first disk (for the controller node). */
+        if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+                printk(KERN_WARNING "disk %d has changed.\n", drv_index);
                 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
                 h->drv[drv_index].busy_configuring = 1;
                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
@@ -1364,43 +1453,23 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 
         /* If the disk is in use return */
         if (ret)
-                return;
-
-        /* Get information about the disk and modify the driver structure */
-        inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-        if (inq_buff == NULL)
-                goto mem_msg;
-
-        /* testing to see if 16-byte CDBs are already being used */
-        if (h->cciss_read == CCISS_READ_16) {
-                cciss_read_capacity_16(h->ctlr, drv_index, 1,
-                        &total_size, &block_size);
-                goto geo_inq;
-        }
-
-        cciss_read_capacity(ctlr, drv_index, 1,
-                            &total_size, &block_size);
-
-        /* if read_capacity returns all F's this volume is >2TB in size */
-        /* so we switch to 16-byte CDB's for all read/write ops */
-        if (total_size == 0xFFFFFFFFULL) {
-                cciss_read_capacity_16(ctlr, drv_index, 1,
-                &total_size, &block_size);
-                h->cciss_read = CCISS_READ_16;
-                h->cciss_write = CCISS_WRITE_16;
-        } else {
-                h->cciss_read = CCISS_READ_10;
-                h->cciss_write = CCISS_WRITE_10;
-        }
-geo_inq:
-        cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
-                               inq_buff, &h->drv[drv_index]);
+                goto freeret;
+
+        /* Save the new information from cciss_geometry_inquiry */
+        /* and serial number inquiry. */
+        h->drv[drv_index].block_size = drvinfo->block_size;
+        h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
+        h->drv[drv_index].heads = drvinfo->heads;
+        h->drv[drv_index].sectors = drvinfo->sectors;
+        h->drv[drv_index].cylinders = drvinfo->cylinders;
+        h->drv[drv_index].raid_level = drvinfo->raid_level;
+        memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
 
         ++h->num_luns;
         disk = h->gendisk[drv_index];
         set_capacity(disk, h->drv[drv_index].nr_blocks);
 
-        /* if it's the controller it's already added */
+        /* if it's the controller (if drv_index == 0) it's already added */
         if (drv_index) {
                 disk->queue = blk_init_queue(do_cciss_request, &h->lock);
                 sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
@@ -1437,6 +1506,7 @@ geo_inq:
 
       freeret:
         kfree(inq_buff);
+        kfree(drvinfo);
         return;
       mem_msg:
         printk(KERN_ERR "cciss: out of memory\n");
@@ -1478,7 +1548,6 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
         int ctlr = h->ctlr;
         int num_luns;
         ReportLunData_struct *ld_buff = NULL;
-        drive_info_struct *drv = NULL;
         int return_code;
         int listlength = 0;
         int i;
@@ -1494,98 +1563,117 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
                 return -EBUSY;
         }
         h->busy_configuring = 1;
+        spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-        /* if del_disk is NULL then we are being called to add a new disk
-         * and update the logical drive table.  If it is not NULL then
-         * we will check if the disk is in use or not.
-         */
-        if (del_disk != NULL) {
-                drv = get_drv(del_disk);
-                drv->busy_configuring = 1;
-                spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-                return_code = deregister_disk(del_disk, drv, 1);
-                drv->busy_configuring = 0;
-                h->busy_configuring = 0;
-                return return_code;
-        } else {
-                spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-                if (!capable(CAP_SYS_RAWIO))
-                        return -EPERM;
+        if (!capable(CAP_SYS_RAWIO))
+                return -EPERM;
 
-                ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
-                if (ld_buff == NULL)
-                        goto mem_msg;
-
-                return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
-                                              sizeof(ReportLunData_struct), 0,
-                                              0, 0, TYPE_CMD);
-
-                if (return_code == IO_OK) {
-                        listlength =
-                                be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
-                } else {        /* reading number of logical volumes failed */
-                        printk(KERN_WARNING "cciss: report logical volume"
-                               " command failed\n");
-                        listlength = 0;
-                        goto freeret;
-                }
+        ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+        if (ld_buff == NULL)
+                goto mem_msg;
+
+        return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+                                      sizeof(ReportLunData_struct), 0,
+                                      0, 0, TYPE_CMD);
 
-                num_luns = listlength / 8;      /* 8 bytes per entry */
-                if (num_luns > CISS_MAX_LUN) {
-                        num_luns = CISS_MAX_LUN;
-                        printk(KERN_WARNING "cciss: more luns configured"
-                               " on controller than can be handled by"
-                               " this driver.\n");
+        if (return_code == IO_OK)
+                listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
+        else {  /* reading number of logical volumes failed */
+                printk(KERN_WARNING "cciss: report logical volume"
+                       " command failed\n");
+                listlength = 0;
+                goto freeret;
+        }
+
+        num_luns = listlength / 8;      /* 8 bytes per entry */
+        if (num_luns > CISS_MAX_LUN) {
+                num_luns = CISS_MAX_LUN;
+                printk(KERN_WARNING "cciss: more luns configured"
+                       " on controller than can be handled by"
+                       " this driver.\n");
+        }
+
+        /* Compare controller drive array to driver's drive array */
+        /* to see if any drives are missing on the controller due */
+        /* to action of Array Config Utility (user deletes drive) */
+        /* and deregister logical drives which have disappeared.  */
+        for (i = 0; i <= h->highest_lun; i++) {
+                int j;
+                drv_found = 0;
+                for (j = 0; j < num_luns; j++) {
+                        memcpy(&lunid, &ld_buff->LUN[j][0], 4);
+                        lunid = le32_to_cpu(lunid);
+                        if (h->drv[i].LunID == lunid) {
+                                drv_found = 1;
+                                break;
+                        }
+                }
+                if (!drv_found) {
+                        /* Deregister it from the OS, it's gone. */
+                        spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+                        h->drv[i].busy_configuring = 1;
+                        spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+                        return_code = deregister_disk(h->gendisk[i],
+                                &h->drv[i], 1);
+                        h->drv[i].busy_configuring = 0;
                 }
+        }
 
-                /* Compare controller drive array to drivers drive array.
-                 * Check for updates in the drive information and any new drives
-                 * on the controller.
-                 */
-                for (i = 0; i < num_luns; i++) {
-                        int j;
+        /* Compare controller drive array to driver's drive array.
+         * Check for updates in the drive information and any new drives
+         * on the controller due to ACU adding logical drives, or changing
+         * a logical drive's size, etc.  Reregister any new/changed drives
+         */
+        for (i = 0; i < num_luns; i++) {
+                int j;
 
-                        drv_found = 0;
+                drv_found = 0;
 
-                        lunid = (0xff &
-                                 (unsigned int)(ld_buff->LUN[i][3])) << 24;
-                        lunid |= (0xff &
-                                  (unsigned int)(ld_buff->LUN[i][2])) << 16;
-                        lunid |= (0xff &
-                                  (unsigned int)(ld_buff->LUN[i][1])) << 8;
-                        lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
+                memcpy(&lunid, &ld_buff->LUN[i][0], 4);
+                lunid = le32_to_cpu(lunid);
 
-                        /* Find if the LUN is already in the drive array
-                         * of the controller.  If so then update its info
-                         * if not is use.  If it does not exist then find
-                         * the first free index and add it.
-                         */
-                        for (j = 0; j <= h->highest_lun; j++) {
-                                if (h->drv[j].LunID == lunid) {
-                                        drv_index = j;
-                                        drv_found = 1;
-                                }
+                /* Find if the LUN is already in the drive array
+                 * of the driver.  If so then update its info
+                 * if not in use.  If it does not exist then find
+                 * the first free index and add it.
+                 */
+                for (j = 0; j <= h->highest_lun; j++) {
+                        if (h->drv[j].raid_level != -1 &&
+                                h->drv[j].LunID == lunid) {
+                                drv_index = j;
+                                drv_found = 1;
+                                break;
                         }
+                }
 
-                        /* check if the drive was found already in the array */
-                        if (!drv_found) {
-                                drv_index = cciss_find_free_drive_index(ctlr);
-                                if (drv_index == -1)
-                                        goto freeret;
-
-                                /*Check if the gendisk needs to be allocated */
+                /* check if the drive was found already in the array */
+                if (!drv_found) {
+                        drv_index = cciss_find_free_drive_index(ctlr);
+                        if (drv_index == -1)
+                                goto freeret;
+                        /*Check if the gendisk needs to be allocated */
+                        if (!h->gendisk[drv_index]) {
+                                h->gendisk[drv_index] =
+                                        alloc_disk(1 << NWD_SHIFT);
                                 if (!h->gendisk[drv_index]){
-                                        h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
-                                        if (!h->gendisk[drv_index]){
-                                                printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
-                                                goto mem_msg;
-                                        }
+                                        printk(KERN_ERR "cciss: could not "
+                                                "allocate new disk %d\n",
+                                                drv_index);
+                                        goto mem_msg;
                                 }
                         }
                         h->drv[drv_index].LunID = lunid;
-                        cciss_update_drive_info(ctlr, drv_index);
-                }               /* end for */
-        }                       /* end else */
+
+                        /* Don't need to mark this busy because nobody
+                         * else knows about this disk yet to contend
+                         * for access to it.
+                         */
+                        h->drv[drv_index].busy_configuring = 0;
+                        wmb();
+
+                }
+                cciss_update_drive_info(ctlr, drv_index);
+        }               /* end for */
 
       freeret:
         kfree(ld_buff);
@@ -1597,6 +1685,7 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
         return -1;
       mem_msg:
         printk(KERN_ERR "cciss: out of memory\n");
+        h->busy_configuring = 0;
         goto freeret;
 }
 
@@ -1652,15 +1741,15 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
                  * other than disk 0 we will call put_disk.  We do not
                  * do this for disk 0 as we need it to be able to
                  * configure the controller.
-                */
+                 */
                 if (clear_all){
                         /* This isn't pretty, but we need to find the
                          * disk in our array and NULL our the pointer.
                          * This is so that we will call alloc_disk if
                          * this index is used again later.
-                        */
+                         */
                         for (i=0; i < CISS_MAX_LUN; i++){
-                                if(h->gendisk[i] == disk){
+                                if (h->gendisk[i] == disk) {
                                         h->gendisk[i] = NULL;
                                         break;
                                 }
@@ -1688,7 +1777,7 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
                 if (drv == h->drv + h->highest_lun) {
                         /* if so, find the new hightest lun */
                         int i, newhighest = -1;
-                        for (i = 0; i < h->highest_lun; i++) {
+                        for (i = 0; i <= h->highest_lun; i++) {
                                 /* if the disk has size > 0, it is available */
                                 if (h->drv[i].heads)
                                         newhighest = i;
@@ -3318,6 +3407,9 @@ geo_inq:
                         cciss_geometry_inquiry(cntl_num, i, 0, total_size,
                                                block_size, inq_buff,
                                                &hba[cntl_num]->drv[i]);
+                        cciss_get_serial_no(cntl_num, i, 0,
+                                hba[cntl_num]->drv[i].serial_no,
+                                sizeof(hba[cntl_num]->drv[i].serial_no));
                 } else {
                         /* initialize raid_level to indicate a free space */
                         hba[cntl_num]->drv[i].raid_level = -1;