Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 265 insertions, 0 deletions

diff --git a/drivers/atm/midway.h b/drivers/atm/midway.h
new file mode 100644
index 000000000000..432525ad5e46
--- /dev/null
+++ b/drivers/atm/midway.h
@@ -0,0 +1,265 @@
+/* drivers/atm/midway.h - Efficient Networks Midway (SAR) description */
+ 
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef DRIVERS_ATM_MIDWAY_H
+#define DRIVERS_ATM_MIDWAY_H
+
+
+#define NR_VCI          1024            /* number of VCIs */
+#define NR_VCI_LD       10              /* log2(NR_VCI) */
+#define NR_DMA_RX       512             /* RX DMA queue entries */
+#define NR_DMA_TX       512             /* TX DMA queue entries */
+#define NR_SERVICE      NR_VCI          /* service list size */
+#define NR_CHAN         8               /* number of TX channels */
+#define TS_CLOCK        25000000        /* traffic shaper clock (cell/sec) */
+
+#define MAP_MAX_SIZE    0x00400000      /* memory window for max config */
+#define EPROM_SIZE      0x00010000
+#define MEM_VALID       0xffc00000      /* mask base address with this */
+#define PHY_BASE        0x00020000      /* offset of PHY register are */
+#define REG_BASE        0x00040000      /* offset of Midway register area */
+#define RAM_BASE        0x00200000      /* offset of RAM area */
+#define RAM_INCREMENT   0x00020000      /* probe for RAM every 128kB */
+
+#define MID_VCI_BASE    RAM_BASE
+#define MID_DMA_RX_BASE (MID_VCI_BASE+NR_VCI*16)
+#define MID_DMA_TX_BASE (MID_DMA_RX_BASE+NR_DMA_RX*8)
+#define MID_SERVICE_BASE (MID_DMA_TX_BASE+NR_DMA_TX*8)
+#define MID_FREE_BASE   (MID_SERVICE_BASE+NR_SERVICE*4)
+
+#define MAC_LEN 6 /* atm.h */
+
+#define MID_MIN_BUF_SIZE (1024)         /*   1 kB is minimum */
+#define MID_MAX_BUF_SIZE (128*1024)     /* 128 kB is maximum */
+
+#define RX_DESCR_SIZE   1               /* RX PDU descr is 1 longword */
+#define TX_DESCR_SIZE   2               /* TX PDU descr is 2 longwords */
+#define AAL5_TRAILER    (ATM_AAL5_TRAILER/4) /* AAL5 trailer is 2 longwords */
+
+#define TX_GAP          8               /* TX buffer gap (words) */
+
+/*
+ * Midway Reset/ID
+ *
+ * All values read-only. Writing to this register resets Midway chip.
+ */
+
+#define MID_RES_ID_MCON 0x00            /* Midway Reset/ID */
+
+#define MID_ID          0xf0000000      /* Midway version */
+#define MID_SHIFT       24
+#define MID_MOTHER_ID   0x00000700      /* mother board id */
+#define MID_MOTHER_SHIFT 8
+#define MID_CON_TI      0x00000080      /* 0: normal ctrl; 1: SABRE */
+#define MID_CON_SUNI    0x00000040      /* 0: UTOPIA; 1: SUNI */
+#define MID_CON_V6      0x00000020      /* 0: non-pipel UTOPIA (required iff
+                                           !CON_SUNI; 1: UTOPIA */
+#define DAUGTHER_ID     0x0000001f      /* daugther board id */
+
+/*
+ * Interrupt Status Acknowledge, Interrupt Status & Interrupt Enable
+ */
+
+#define MID_ISA         0x01            /* Interrupt Status Acknowledge */
+#define MID_IS          0x02            /* Interrupt Status */
+#define MID_IE          0x03            /* Interrupt Enable */
+
+#define MID_TX_COMPLETE_7 0x00010000    /* channel N completed a PDU */
+#define MID_TX_COMPLETE_6 0x00008000    /* transmission */
+#define MID_TX_COMPLETE_5 0x00004000
+#define MID_TX_COMPLETE_4 0x00002000
+#define MID_TX_COMPLETE_3 0x00001000
+#define MID_TX_COMPLETE_2 0x00000800
+#define MID_TX_COMPLETE_1 0x00000400
+#define MID_TX_COMPLETE_0 0x00000200
+#define MID_TX_COMPLETE 0x0001fe00      /* any TX */
+#define MID_TX_DMA_OVFL 0x00000100      /* DMA to adapter overflow */
+#define MID_TX_IDENT_MISM 0x00000080    /* TX: ident mismatch => halted */
+#define MID_DMA_LERR_ACK 0x00000040     /* LERR - SBus ? */
+#define MID_DMA_ERR_ACK 0x00000020      /* DMA error */
+#define MID_RX_DMA_COMPLETE 0x00000010  /* DMA to host done */
+#define MID_TX_DMA_COMPLETE 0x00000008  /* DMA from host done */
+#define MID_SERVICE     0x00000004      /* something in service list */
+#define MID_SUNI_INT    0x00000002      /* interrupt from SUNI */
+#define MID_STAT_OVFL   0x00000001      /* statistics overflow */
+
+/*
+ * Master Control/Status
+ */
+
+#define MID_MC_S        0x04
+
+#define MID_INT_SELECT  0x000001C0      /* Interrupt level (000: off) */
+#define MID_INT_SEL_SHIFT 6
+#define MID_TX_LOCK_MODE 0x00000020     /* 0: streaming; 1: TX ovfl->lock */
+#define MID_DMA_ENABLE  0x00000010      /* R: 0: disable; 1: enable
+                                           W: 0: no change; 1: enable */
+#define MID_TX_ENABLE   0x00000008      /* R: 0: TX disabled; 1: enabled
+                                           W: 0: no change; 1: enable */
+#define MID_RX_ENABLE   0x00000004      /* like TX */
+#define MID_WAIT_1MS    0x00000002      /* R: 0: timer not running; 1: running
+                                           W: 0: no change; 1: no interrupts
+                                                               for 1 ms */
+#define MID_WAIT_500US  0x00000001      /* like WAIT_1MS, but 0.5 ms */
+
+/*
+ * Statistics
+ *
+ * Cleared when reading.
+ */
+
+#define MID_STAT                0x05
+
+#define MID_VCI_TRASH   0xFFFF0000      /* trashed cells because of VCI mode */
+#define MID_VCI_TRASH_SHIFT 16
+#define MID_OVFL_TRASH  0x0000FFFF      /* trashed cells because of overflow */
+
+/*
+ * Address registers
+ */
+
+#define MID_SERV_WRITE  0x06    /* free pos in service area (R, 10 bits) */
+#define MID_DMA_ADDR    0x07    /* virtual DMA address (R, 32 bits) */
+#define MID_DMA_WR_RX   0x08    /* (RW, 9 bits) */
+#define MID_DMA_RD_RX   0x09
+#define MID_DMA_WR_TX   0x0A
+#define MID_DMA_RD_TX   0x0B
+
+/*
+ * Transmit Place Registers (0x10+4*channel)
+ */
+
+#define MID_TX_PLACE(c) (0x10+4*(c))
+
+#define MID_SIZE        0x00003800      /* size, N*256 x 32 bit */
+#define MID_SIZE_SHIFT  11
+#define MID_LOCATION    0x000007FF      /* location in adapter memory (word) */
+
+#define MID_LOC_SKIP    8               /* 8 bits of location are always zero
+                                           (applies to all uses of location) */
+
+/*
+ * Transmit ReadPtr Registers (0x11+4*channel)
+ */
+
+#define MID_TX_RDPTR(c) (0x11+4*(c))
+
+#define MID_READ_PTR    0x00007FFF      /* next word for PHY */
+
+/*
+ * Transmit DescrStart Registers (0x12+4*channel)
+ */
+
+#define MID_TX_DESCRSTART(c) (0x12+4*(c))
+
+#define MID_DESCR_START 0x00007FFF      /* seg buffer being DMAed */
+
+#define ENI155_MAGIC    0xa54b872d
+
+struct midway_eprom {
+        unsigned char mac[MAC_LEN],inv_mac[MAC_LEN];
+        unsigned char pad[36];
+        u32 serial,inv_serial;
+        u32 magic,inv_magic;
+};
+
+
+/*
+ * VCI table entry
+ */
+
+#define MID_VCI_IN_SERVICE      0x00000001      /* set if VCI is currently in
+                                                   service list */
+#define MID_VCI_SIZE            0x00038000      /* reassembly buffer size,
+                                                   2*<size> kB */
+#define MID_VCI_SIZE_SHIFT      15
+#define MID_VCI_LOCATION        0x1ffc0000      /* buffer location */
+#define MID_VCI_LOCATION_SHIFT  18
+#define MID_VCI_PTI_MODE        0x20000000      /* 0: trash, 1: preserve */
+#define MID_VCI_MODE            0xc0000000
+#define MID_VCI_MODE_SHIFT      30
+#define MID_VCI_READ            0x00007fff
+#define MID_VCI_READ_SHIFT      0
+#define MID_VCI_DESCR           0x7fff0000
+#define MID_VCI_DESCR_SHIFT     16
+#define MID_VCI_COUNT           0x000007ff
+#define MID_VCI_COUNT_SHIFT     0
+#define MID_VCI_STATE           0x0000c000
+#define MID_VCI_STATE_SHIFT     14
+#define MID_VCI_WRITE           0x7fff0000
+#define MID_VCI_WRITE_SHIFT     16
+
+#define MID_MODE_TRASH  0
+#define MID_MODE_RAW    1
+#define MID_MODE_AAL5   2
+
+/*
+ * Reassembly buffer descriptor
+ */
+
+#define MID_RED_COUNT           0x000007ff
+#define MID_RED_CRC_ERR         0x00000800
+#define MID_RED_T               0x00001000
+#define MID_RED_CE              0x00010000
+#define MID_RED_CLP             0x01000000
+#define MID_RED_IDEN            0xfe000000
+#define MID_RED_SHIFT           25
+
+#define MID_RED_RX_ID           0x1b            /* constant identifier */
+
+/*
+ * Segmentation buffer descriptor
+ */
+
+#define MID_SEG_COUNT           MID_RED_COUNT
+#define MID_SEG_RATE            0x01f80000
+#define MID_SEG_RATE_SHIFT      19
+#define MID_SEG_PR              0x06000000
+#define MID_SEG_PR_SHIFT        25
+#define MID_SEG_AAL5            0x08000000
+#define MID_SEG_ID              0xf0000000
+#define MID_SEG_ID_SHIFT        28
+#define MID_SEG_MAX_RATE        63
+
+#define MID_SEG_CLP             0x00000001
+#define MID_SEG_PTI             0x0000000e
+#define MID_SEG_PTI_SHIFT       1
+#define MID_SEG_VCI             0x00003ff0
+#define MID_SEG_VCI_SHIFT       4
+
+#define MID_SEG_TX_ID           0xb             /* constant identifier */
+
+/*
+ * DMA entry
+ */
+
+#define MID_DMA_COUNT           0xffff0000
+#define MID_DMA_COUNT_SHIFT     16
+#define MID_DMA_END             0x00000020
+#define MID_DMA_TYPE            0x0000000f
+
+#define MID_DT_JK       0x3
+#define MID_DT_WORD     0x0
+#define MID_DT_2W       0x7
+#define MID_DT_4W       0x4
+#define MID_DT_8W       0x5
+#define MID_DT_16W      0x6
+#define MID_DT_2WM      0xf
+#define MID_DT_4WM      0xc
+#define MID_DT_8WM      0xd
+#define MID_DT_16WM     0xe
+
+/* only for RX*/
+#define MID_DMA_VCI             0x0000ffc0
+#define MID_DMA_VCI_SHIFT       6
+
+/* only for TX */
+#define MID_DMA_CHAN            0x000001c0
+#define MID_DMA_CHAN_SHIFT      6
+
+#define MID_DT_BYTE     0x1
+#define MID_DT_HWORD    0x2
+
+#endif