ahci: Factor out PCI specifics from ahci_save_initial_config()

Make ahci_save_initial_config() a bit more generic by introducing
force_port_map and mask_port_map arguments.

Move PCI stuff into ahci_pci_save_initial_config().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 42 insertions, 24 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c720c2c5cefe..530f0c1f1793 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -842,6 +842,8 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *      ahci_save_initial_config - Save and fixup initial config values
  *      @pdev: target PCI device
  *      @hpriv: host private area to store config values
+ *      @force_port_map: force port map to a specified value
+ *      @mask_port_map: mask out particular bits from port map
  *
  *      Some registers containing configuration info might be setup by
  *      BIOS and might be cleared on reset.  This function saves the
@@ -854,12 +856,13 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *      None.
  */
 static void ahci_save_initial_config(struct pci_dev *pdev,
-                                     struct ahci_host_priv *hpriv)
+                                     struct ahci_host_priv *hpriv,
+                                     unsigned int force_port_map,
+                                     unsigned int mask_port_map)
 {
         void __iomem *mmio = hpriv->mmio;
         u32 cap, cap2, vers, port_map;
         int i;
-        int mv;
 
         /* make sure AHCI mode is enabled before accessing CAP */
         ahci_enable_ahci(mmio);
@@ -909,32 +912,19 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
                 cap &= ~HOST_CAP_SNTF;
         }
 
-        if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
-            port_map != 1) {
+        if (force_port_map && port_map != force_port_map) {
                 dev_printk(KERN_INFO, &pdev->dev,
-                           "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
-                           port_map, 1);
-                port_map = 1;
+                           "forcing port_map 0x%x -> 0x%x\n",
+                           port_map, force_port_map);
+                port_map = force_port_map;
         }
 
-        /*
-         * Temporary Marvell 6145 hack: PATA port presence
-         * is asserted through the standard AHCI port
-         * presence register, as bit 4 (counting from 0)
-         */
-        if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
-                if (pdev->device == 0x6121)
-                        mv = 0x3;
-                else
-                        mv = 0xf;
+        if (mask_port_map) {
                 dev_printk(KERN_ERR, &pdev->dev,
-                           "MV_AHCI HACK: port_map %x -> %x\n",
+                           "masking port_map 0x%x -> 0x%x\n",
                            port_map,
-                           port_map & mv);
-                dev_printk(KERN_ERR, &pdev->dev,
-                          "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
-
-                port_map &= mv;
+                           port_map & mask_port_map);
+                port_map &= mask_port_map;
         }
 
         /* cross check port_map and cap.n_ports */
@@ -973,6 +963,34 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
         hpriv->port_map = port_map;
 }
 
+static void ahci_pci_save_initial_config(struct pci_dev *pdev,
+                                         struct ahci_host_priv *hpriv)
+{
+        unsigned int force_port_map = 0;
+        unsigned int mask_port_map = 0;
+
+        if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
+                dev_info(&pdev->dev, "JMB361 has only one port\n");
+                force_port_map = 1;
+        }
+
+        /*
+         * Temporary Marvell 6145 hack: PATA port presence
+         * is asserted through the standard AHCI port
+         * presence register, as bit 4 (counting from 0)
+         */
+        if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+                if (pdev->device == 0x6121)
+                        mask_port_map = 0x3;
+                else
+                        mask_port_map = 0xf;
+                dev_info(&pdev->dev,
+                          "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
+        }
+
+        ahci_save_initial_config(pdev, hpriv, force_port_map, mask_port_map);
+}
+
 /**
  *      ahci_restore_initial_config - Restore initial config
  *      @host: target ATA host
@@ -3316,7 +3334,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
 
         /* save initial config */
-        ahci_save_initial_config(pdev, hpriv);
+        ahci_pci_save_initial_config(pdev, hpriv);
 
         /* prepare host */
         if (hpriv->cap & HOST_CAP_NCQ) {