pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)

... the same as the 'pata_hpt366' driver does.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

2 files changed, 16 insertions, 18 deletions

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a1f830eaa7c9..6003a34d614e 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt37x"
-#define DRV_VERSION     "0.6.19"
+#define DRV_VERSION     "0.6.20"
 
 struct hpt_clock {
         u8      xfer_speed;
@@ -863,7 +863,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         chip_table = &hpt372;
                         break;
                 default:
-                        printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+                        pr_err(DRV_NAME ": Unknown HPT366 subtype, "
                                "please report (%d).\n", rev);
                         return -ENODEV;
                 }
@@ -906,8 +906,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                 *ppi = &info_hpt374_fn1;
                         break;
                 default:
-                        printk(KERN_ERR
-                               "pata_hpt37x: PCI table is bogus, please report (%d).\n",
+                        pr_err(DRV_NAME
+                               ": PCI table is bogus, please report (%d).\n",
                                dev->device);
                                 return -ENODEV;
                 }
@@ -957,8 +957,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 u8 sr;
                 u32 total = 0;
 
-                printk(KERN_WARNING
-                       "pata_hpt37x: BIOS has not set timing clocks.\n");
+                pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
 
                 /* This is the process the HPT371 BIOS is reported to use */
                 for (i = 0; i < 128; i++) {
@@ -1014,7 +1013,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                                                (f_high << 16) | f_low | 0x100);
                 }
                 if (adjust == 8) {
-                        printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
+                        pr_err(DRV_NAME ": DPLL did not stabilize!\n");
                         return -ENODEV;
                 }
                 if (dpll == 3)
@@ -1022,8 +1021,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 else
                         private_data = (void *)hpt37x_timings_50;
 
-                printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
-                       MHz[clock_slot], MHz[dpll]);
+                pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+                        MHz[clock_slot], MHz[dpll]);
         } else {
                 private_data = (void *)chip_table->clocks[clock_slot];
                 /*
@@ -1036,8 +1035,9 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         ppi[0] = &info_hpt370_33;
                 if (clock_slot < 2 && ppi[0] == &info_hpt370a)
                         ppi[0] = &info_hpt370a_33;
-                printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
-                       chip_table->name, MHz[clock_slot]);
+
+                pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+                        chip_table->name, MHz[clock_slot]);
         }
 
         /* Now kick off ATA set up */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d2239bbdb798..eca68caf5f46 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x2n"
-#define DRV_VERSION     "0.3.13"
+#define DRV_VERSION     "0.3.14"
 
 enum {
         HPT_PCI_FAST    =       (1 << 31),
@@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
                 u16 sr;
                 u32 total = 0;
 
-                printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+                pr_warning(DRV_NAME ": BIOS clock data not set.\n");
 
                 /* This is the process the HPT371 BIOS is reported to use */
                 for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@ hpt372n:
                 ppi[0] = &info_hpt372n;
                 break;
         default:
-                printk(KERN_ERR
-                       "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+                pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
                        dev->device);
                 return -ENODEV;
         }
@@ -579,12 +578,11 @@ hpt372n:
                 pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
         }
         if (adjust == 8) {
-                printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+                pr_err(DRV_NAME ": DPLL did not stabilize!\n");
                 return -ENODEV;
         }
 
-        printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
-               pci_mhz);
+        pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
 
         /*
          * Set our private data up. We only need a few flags