libata: Add 32bit PIO support

This matters for some controllers and in one or two cases almost doubles
PIO performance. Add a bmdma32 operations set we can inherit and activate
it for some controllers

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

6 files changed, 63 insertions, 9 deletions

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 78659546130c..887d8f46a287 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -310,7 +310,7 @@ static struct scsi_host_template piix_sht = {
 };
 
 static struct ata_port_operations piix_pata_ops = {
-        .inherits               = &ata_bmdma_port_ops,
+        .inherits               = &ata_bmdma32_port_ops,
         .cable_detect           = ata_cable_40wire,
         .set_piomode            = piix_set_piomode,
         .set_dmamode            = piix_set_dmamode,
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9033d164c4ec..b58549fac460 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -78,6 +78,13 @@ const struct ata_port_operations ata_bmdma_port_ops = {
         .bmdma_status           = ata_bmdma_status,
 };
 
+const struct ata_port_operations ata_bmdma32_port_ops = {
+        .inherits               = &ata_bmdma_port_ops,
+
+        .sff_data_xfer          = ata_sff_data_xfer32,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
+
 /**
  *      ata_fill_sg - Fill PCI IDE PRD table
  *      @qc: Metadata associated with taskfile to be transferred
@@ -719,6 +726,52 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
 }
 
 /**
+ *      ata_sff_data_xfer32 - Transfer data by PIO
+ *      @dev: device to target
+ *      @buf: data buffer
+ *      @buflen: buffer length
+ *      @rw: read/write
+ *
+ *      Transfer data from/to the device data register by PIO using 32bit
+ *      I/O operations.
+ *
+ *      LOCKING:
+ *      Inherited from caller.
+ *
+ *      RETURNS:
+ *      Bytes consumed.
+ */
+
+unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
+                               unsigned int buflen, int rw)
+{
+        struct ata_port *ap = dev->link->ap;
+        void __iomem *data_addr = ap->ioaddr.data_addr;
+        unsigned int words = buflen >> 2;
+        int slop = buflen & 3;
+
+        /* Transfer multiple of 4 bytes */
+        if (rw == READ)
+                ioread32_rep(data_addr, buf, words);
+        else
+                iowrite32_rep(data_addr, buf, words);
+
+        if (unlikely(slop)) {
+                __le32 pad;
+                if (rw == READ) {
+                        pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
+                        memcpy(buf + buflen - slop, &pad, slop);
+                } else {
+                        memcpy(&pad, buf + buflen - slop, slop);
+                        iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+                }
+                words++;
+        }
+        return words << 2;
+}
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
+
+/**
  *      ata_sff_data_xfer_noirq - Transfer data by PIO
  *      @dev: device to target
  *      @buf: data buffer
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index a4f9e39442c6..a7999c19f0c9 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -151,8 +151,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o
 
         pci_read_config_byte(pdev, pio_fifo, &fifo);
         fifo &= ~(0x0F << shift);
-        if (on)
-                fifo |= (on << shift);
+        fifo |= (on << shift);
         pci_write_config_byte(pdev, pio_fifo, fifo);
 }
 
@@ -370,10 +369,11 @@ static struct ata_port_operations ali_early_port_ops = {
         .inherits       = &ata_sff_port_ops,
         .cable_detect   = ata_cable_40wire,
         .set_piomode    = ali_set_piomode,
+        .sff_data_xfer  = ata_sff_data_xfer32,
 };
 
 static const struct ata_port_operations ali_dma_base_ops = {
-        .inherits       = &ata_bmdma_port_ops,
+        .inherits       = &ata_bmdma32_port_ops,
         .set_piomode    = ali_set_piomode,
         .set_dmamode    = ali_set_dmamode,
 };
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 0ec9c7d9fe9d..63719ab9ea44 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.10"
+#define DRV_VERSION "0.3.11"
 
 /**
  *      timing_setup            -       shared timing computation and load
@@ -345,7 +345,7 @@ static struct scsi_host_template amd_sht = {
 };
 
 static const struct ata_port_operations amd_base_port_ops = {
-        .inherits       = &ata_bmdma_port_ops,
+        .inherits       = &ata_bmdma32_port_ops,
         .prereset       = amd_pre_reset,
 };
 
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 7c8faa48b5f3..aa576cac4d17 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.6"
+#define DRV_VERSION "0.7.7"
 
 enum {
         IDETIM = 0x6C,          /* IDE control register */
@@ -146,6 +146,7 @@ static struct ata_port_operations mpiix_port_ops = {
         .cable_detect   = ata_cable_40wire,
         .set_piomode    = mpiix_set_piomode,
         .prereset       = mpiix_pre_reset,
+        .sff_data_xfer  = ata_sff_data_xfer32,
 };
 
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 83580a59db58..9e764e5747e6 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -32,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.8"
+#define DRV_VERSION "0.4.9"
 
 #define SIL680_MMIO_BAR         5
 
@@ -195,7 +195,7 @@ static struct scsi_host_template sil680_sht = {
 };
 
 static struct ata_port_operations sil680_port_ops = {
-        .inherits       = &ata_bmdma_port_ops,
+        .inherits       = &ata_bmdma32_port_ops,
         .cable_detect   = sil680_cable_detect,
         .set_piomode    = sil680_set_piomode,
         .set_dmamode    = sil680_set_dmamode,