libata: remove unused functions

This patch removes the following obsolete functions:
- libata-core.c: __sata_phy_reset()
- libata-core.c: sata_phy_reset()
- libata-eh.c: ata_qc_timeout()
- libata-eh.c: ata_eng_timeout()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Tejun Heo <htejun@gmail.com>

2 files changed, 0 insertions, 173 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 81898036dbca..1584164e7704 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2581,81 +2581,6 @@ void sata_print_link_status(struct ata_link *link)
 }
 
 /**
- *      __sata_phy_reset - Wake/reset a low-level SATA PHY
- *      @ap: SATA port associated with target SATA PHY.
- *
- *      This function issues commands to standard SATA Sxxx
- *      PHY registers, to wake up the phy (and device), and
- *      clear any reset condition.
- *
- *      LOCKING:
- *      PCI/etc. bus probe sem.
- *
- */
-void __sata_phy_reset(struct ata_port *ap)
-{
-        struct ata_link *link = &ap->link;
-        unsigned long timeout = jiffies + (HZ * 5);
-        u32 sstatus;
-
-        if (ap->flags & ATA_FLAG_SATA_RESET) {
-                /* issue phy wake/reset */
-                sata_scr_write_flush(link, SCR_CONTROL, 0x301);
-                /* Couldn't find anything in SATA I/II specs, but
-                 * AHCI-1.1 10.4.2 says at least 1 ms. */
-                mdelay(1);
-        }
-        /* phy wake/clear reset */
-        sata_scr_write_flush(link, SCR_CONTROL, 0x300);
-
-        /* wait for phy to become ready, if necessary */
-        do {
-                msleep(200);
-                sata_scr_read(link, SCR_STATUS, &sstatus);
-                if ((sstatus & 0xf) != 1)
-                        break;
-        } while (time_before(jiffies, timeout));
-
-        /* print link status */
-        sata_print_link_status(link);
-
-        /* TODO: phy layer with polling, timeouts, etc. */
-        if (!ata_link_offline(link))
-                ata_port_probe(ap);
-        else
-                ata_port_disable(ap);
-
-        if (ap->flags & ATA_FLAG_DISABLED)
-                return;
-
-        if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
-                ata_port_disable(ap);
-                return;
-        }
-
-        ap->cbl = ATA_CBL_SATA;
-}
-
-/**
- *      sata_phy_reset - Reset SATA bus.
- *      @ap: SATA port associated with target SATA PHY.
- *
- *      This function resets the SATA bus, and then probes
- *      the bus for devices.
- *
- *      LOCKING:
- *      PCI/etc. bus probe sem.
- *
- */
-void sata_phy_reset(struct ata_port *ap)
-{
-        __sata_phy_reset(ap);
-        if (ap->flags & ATA_FLAG_DISABLED)
-                return;
-        ata_bus_reset(ap);
-}
-
-/**
  *      ata_dev_pair            -       return other device on cable
  *      @adev: device
  *
@@ -7653,8 +7578,6 @@ EXPORT_SYMBOL_GPL(ata_dev_disable);
 EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(sata_phy_reset);
-EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(ata_std_softreset);
@@ -7725,7 +7648,6 @@ EXPORT_SYMBOL_GPL(ata_port_desc);
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
 #endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
 EXPORT_SYMBOL_GPL(ata_link_abort);
 EXPORT_SYMBOL_GPL(ata_port_abort);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ed8813b222a0..0dac69db1fdf 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -559,101 +559,6 @@ void ata_port_wait_eh(struct ata_port *ap)
         }
 }
 
-/**
- *      ata_qc_timeout - Handle timeout of queued command
- *      @qc: Command that timed out
- *
- *      Some part of the kernel (currently, only the SCSI layer)
- *      has noticed that the active command on port @ap has not
- *      completed after a specified length of time.  Handle this
- *      condition by disabling DMA (if necessary) and completing
- *      transactions, with error if necessary.
- *
- *      This also handles the case of the "lost interrupt", where
- *      for some reason (possibly hardware bug, possibly driver bug)
- *      an interrupt was not delivered to the driver, even though the
- *      transaction completed successfully.
- *
- *      TODO: kill this function once old EH is gone.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- */
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
-        struct ata_port *ap = qc->ap;
-        u8 host_stat = 0, drv_stat;
-        unsigned long flags;
-
-        DPRINTK("ENTER\n");
-
-        ap->hsm_task_state = HSM_ST_IDLE;
-
-        spin_lock_irqsave(ap->lock, flags);
-
-        switch (qc->tf.protocol) {
-
-        case ATA_PROT_DMA:
-        case ATA_PROT_ATAPI_DMA:
-                host_stat = ap->ops->bmdma_status(ap);
-
-                /* before we do anything else, clear DMA-Start bit */
-                ap->ops->bmdma_stop(qc);
-
-                /* fall through */
-
-        default:
-                ata_altstatus(ap);
-                drv_stat = ata_chk_status(ap);
-
-                /* ack bmdma irq events */
-                ap->ops->irq_clear(ap);
-
-                ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, "
-                               "stat 0x%x host_stat 0x%x\n",
-                               qc->tf.command, drv_stat, host_stat);
-
-                /* complete taskfile transaction */
-                qc->err_mask |= AC_ERR_TIMEOUT;
-                break;
-        }
-
-        spin_unlock_irqrestore(ap->lock, flags);
-
-        ata_eh_qc_complete(qc);
-
-        DPRINTK("EXIT\n");
-}
-
-/**
- *      ata_eng_timeout - Handle timeout of queued command
- *      @ap: Port on which timed-out command is active
- *
- *      Some part of the kernel (currently, only the SCSI layer)
- *      has noticed that the active command on port @ap has not
- *      completed after a specified length of time.  Handle this
- *      condition by disabling DMA (if necessary) and completing
- *      transactions, with error if necessary.
- *
- *      This also handles the case of the "lost interrupt", where
- *      for some reason (possibly hardware bug, possibly driver bug)
- *      an interrupt was not delivered to the driver, even though the
- *      transaction completed successfully.
- *
- *      TODO: kill this function once old EH is gone.
- *
- *      LOCKING:
- *      Inherited from SCSI layer (none, can sleep)
- */
-void ata_eng_timeout(struct ata_port *ap)
-{
-        DPRINTK("ENTER\n");
-
-        ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag));
-
-        DPRINTK("EXIT\n");
-}
-
 static int ata_eh_nr_in_flight(struct ata_port *ap)
 {
         unsigned int tag;