Merge branch 'master' into gfs2

47 files changed, 152 insertions, 201 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 99837d932f36..3f4aa0c99ee4 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -311,7 +311,7 @@ config PATA_JMICRON
 
 config PATA_LEGACY
         tristate "Legacy ISA PATA support (Experimental)"
-        depends on PCI && EXPERIMENTAL
+        depends on ISA && EXPERIMENTAL
         help
           This option enables support for ISA/VLB bus legacy PATA
           ports and allows them to be accessed via the new ATA layer.
@@ -400,6 +400,7 @@ config PATA_PDC_OLD
 
 config PATA_QDI
         tristate "QDI VLB PATA support"
+        depends on ISA
         help
           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 1d1c30a2fcd0..377425e71391 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -143,7 +143,7 @@ static struct ata_port_operations generic_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .irq_handler    = ata_interrupt,
         .irq_clear      = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ab2ecccf7798..5719704eb0ee 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -643,11 +643,9 @@ static int piix_pata_prereset(struct ata_port *ap)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-        if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
-                ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
-                ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
+                return -ENOENT;
+                
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -851,7 +849,7 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
  *      @ap: Port whose timings we are configuring
  *      @adev: Drive in question
  *      @udma: udma mode, 0 - 6
- *      @is_ich: set if the chip is an ICH device
+ *      @isich: set if the chip is an ICH device
  *
  *      Set UDMA mode for device, in host controller PCI config space.
  *
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 753b0152afd1..b4abd6850367 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5453,6 +5453,11 @@ int ata_device_add(const struct ata_probe_ent *ent)
         int rc;
 
         DPRINTK("ENTER\n");
+        
+        if (ent->irq == 0) {
+                dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
+                return 0;
+        }
         /* alloc a container for our list of ATA ports (buses) */
         host = kzalloc(sizeof(struct ata_host) +
                        (ent->n_ports * sizeof(void *)), GFP_KERNEL);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 3fa80f09f2ae..02b2b2787d9b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1515,7 +1515,11 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
         if (prereset) {
                 rc = prereset(ap);
                 if (rc) {
-                        ata_port_printk(ap, KERN_ERR,
+                        if (rc == -ENOENT) {
+                                ata_port_printk(ap, KERN_DEBUG, "port disabled. ignoring.\n");
+                                ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
+                        } else
+                                ata_port_printk(ap, KERN_ERR,
                                         "prereset failed (errno=%d)\n", rc);
                         return rc;
                 }
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 688bb55e197a..08b3a407473e 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -881,7 +881,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
         probe_ent->private_data = port[0]->private_data;
 
         if (port_mask & ATA_PORT_PRIMARY) {
-                probe_ent->irq = 14;
+                probe_ent->irq = ATA_PRIMARY_IRQ;
                 probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
                 probe_ent->port[0].altstatus_addr =
                 probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
@@ -896,9 +896,9 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
 
         if (port_mask & ATA_PORT_SECONDARY) {
                 if (probe_ent->irq)
-                        probe_ent->irq2 = 15;
+                        probe_ent->irq2 = ATA_SECONDARY_IRQ;
                 else
-                        probe_ent->irq = 15;
+                        probe_ent->irq = ATA_SECONDARY_IRQ;
                 probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
                 probe_ent->port[1].altstatus_addr =
                 probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 8448ee6e0eed..87af3b5861ab 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -369,7 +369,7 @@ static struct ata_port_operations ali_early_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -410,7 +410,7 @@ static struct ata_port_operations ali_20_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -448,7 +448,7 @@ static struct ata_port_operations ali_c2_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -485,7 +485,7 @@ static struct ata_port_operations ali_c5_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 3293cf9a7eb5..599ee266722c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
 
 /**
  *      timing_setup            -       shared timing computation and load
@@ -137,11 +137,8 @@ static int amd_pre_reset(struct ata_port *ap)
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         u8 ata66;
 
-        if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
+                return -ENOENT;
 
         pci_read_config_byte(pdev, 0x42, &ata66);
         if (ata66 & bitmask[ap->port_no])
@@ -167,11 +164,9 @@ static int amd_early_pre_reset(struct ata_port *ap)
                 { 0x40, 1, 0x01, 0x01 }
         };
 
-        if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         /* No host side cable detection */
         ap->cbl = ATA_CBL_PATA80;
         return ata_std_prereset(ap);
@@ -262,12 +257,8 @@ static int nv_pre_reset(struct ata_port *ap) {
         u8 ata66;
         u16 udma;
 
-        if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
-
+        if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
+                return -ENOENT;
 
         pci_read_config_byte(pdev, 0x52, &ata66);
         if (ata66 & bitmask[ap->port_no])
@@ -368,7 +359,7 @@ static struct ata_port_operations amd33_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -402,7 +393,7 @@ static struct ata_port_operations amd66_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -436,7 +427,7 @@ static struct ata_port_operations amd100_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -470,7 +461,7 @@ static struct ata_port_operations amd133_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -504,7 +495,7 @@ static struct ata_port_operations nv100_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -538,7 +529,7 @@ static struct ata_port_operations nv133_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index d6ef3bf1bac7..c4ccb75a4f1d 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -28,7 +28,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_artop"
-#define DRV_VERSION     "0.4.1"
+#define DRV_VERSION     "0.4.2"
 
 /*
  *      The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -47,11 +47,9 @@ static int artop6210_pre_reset(struct ata_port *ap)
                 { 0x4AU, 1U, 0x04UL, 0x04UL },  /* port 1 */
         };
 
-        if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -90,11 +88,9 @@ static int artop6260_pre_reset(struct ata_port *ap)
         u8 tmp;
 
         /* Odd numbered device ids are the units with enable bits (the -R cards) */
-        if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         pci_read_config_byte(pdev, 0x49, &tmp);
         if (tmp & (1 >> ap->port_no))
                 ap->cbl = ATA_CBL_PATA40;
@@ -344,7 +340,7 @@ static const struct ata_port_operations artop6210_ops = {
         .bmdma_status           = ata_bmdma_status,
         .qc_prep                = ata_qc_prep,
         .qc_issue               = ata_qc_issue_prot,
-        .eng_timeout            = ata_eng_timeout,
+
         .data_xfer              = ata_pio_data_xfer,
 
         .irq_handler            = ata_interrupt,
@@ -379,8 +375,6 @@ static const struct ata_port_operations artop6260_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 3f78a1e54a75..6c2269b6bd3c 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
 
 enum {
         ATIIXP_IDE_PIO_TIMING   = 0x40,
@@ -41,11 +41,9 @@ static int atiixp_pre_reset(struct ata_port *ap)
                 { 0x48, 1, 0x08, 0x00 }
         };
 
-        if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         ap->cbl = ATA_CBL_PATA80;
         return ata_std_prereset(ap);
 }
@@ -244,7 +242,7 @@ static struct ata_port_operations atiixp_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index abf1bb7bd322..e92b0ef43ec5 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -301,7 +301,7 @@ static struct ata_port_operations cmd64x_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -335,7 +335,7 @@ static struct ata_port_operations cmd646r1_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -369,7 +369,7 @@ static struct ata_port_operations cmd648_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 792ce4828510..a6c6cebd0dae 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -193,8 +193,6 @@ static struct ata_port_operations cs5520_port_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index f3d8a3bc1e78..7bba4d954e9c 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -207,7 +207,7 @@ static struct ata_port_operations cs5530_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = cs5530_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 69d6b4258724..d64fcdceaf01 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -211,7 +211,7 @@ static struct ata_port_operations cs5535_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index fd55474e0d15..dfa5ac539048 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -162,7 +162,7 @@ static struct ata_port_operations cy82c693_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index c30bc181304f..95cd1ca181f5 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_efar"
-#define DRV_VERSION     "0.4.1"
+#define DRV_VERSION     "0.4.2"
 
 /**
  *      efar_pre_reset  -       check for 40/80 pin
@@ -42,11 +42,9 @@ static int efar_pre_reset(struct ata_port *ap)
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         u8 tmp;
 
-        if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         pci_read_config_byte(pdev, 0x47, &tmp);
         if (tmp & (2 >> ap->port_no))
                 ap->cbl = ATA_CBL_PATA40;
@@ -263,8 +261,6 @@ static const struct ata_port_operations efar_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 94bb1dfc3f19..cf656ecbe507 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -360,7 +360,7 @@ static struct ata_port_operations hpt366_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 532a7928f803..10318c0012ef 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -793,7 +793,7 @@ static struct ata_port_operations hpt370_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -832,7 +832,7 @@ static struct ata_port_operations hpt370a_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -872,7 +872,7 @@ static struct ata_port_operations hpt372_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -912,7 +912,7 @@ static struct ata_port_operations hpt374_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 06c8db079b91..5c5d4f6ab901 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -372,7 +372,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = hpt3x2n_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 152770133ab1..1f084ab1ccc6 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -145,7 +145,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 73948c8b7270..640b8b0954f5 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -52,7 +52,7 @@ static struct ata_port_operations isapnp_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index af39097d8081..82a46ff40000 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -703,7 +703,7 @@ static struct ata_port_operations it821x_smart_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = it821x_smart_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -739,7 +739,7 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = it821x_passthru_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_clear      = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 6832a643a9eb..be3a866b111f 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -51,7 +51,7 @@ static int jmicron_pre_reset(struct ata_port *ap)
         /* Check if our port is enabled */
         pci_read_config_dword(pdev, 0x40, &control);
         if ((control & port_mask) == 0)
-                return 0;
+                return -ENOENT;
 
         /* There are two basic mappings. One has the two SATA ports merged
            as master/slave and the secondary as PATA, the other has only the
@@ -164,8 +164,7 @@ static const struct ata_port_operations jmicron_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        /* Timeout handling. Special recovery hooks here */
-        .eng_timeout            = ata_eng_timeout,
+        /* IRQ-related hooks */
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index ad37c220bb2c..10231ef731d1 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -161,7 +161,7 @@ static struct ata_port_operations simple_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer_noirq,
 
         .irq_handler    = ata_interrupt,
@@ -186,7 +186,7 @@ static struct ata_port_operations legacy_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer_noirq,
 
         .irq_handler    = ata_interrupt,
@@ -296,7 +296,7 @@ static struct ata_port_operations pdc20230_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = pdc_data_xfer_vlb,
 
         .irq_handler    = ata_interrupt,
@@ -348,7 +348,7 @@ static struct ata_port_operations ht6560a_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,    /* Check vlb/noirq */
 
         .irq_handler    = ata_interrupt,
@@ -411,7 +411,7 @@ static struct ata_port_operations ht6560b_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,    /* FIXME: Check 32bit and noirq */
 
         .irq_handler    = ata_interrupt,
@@ -529,7 +529,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -659,7 +659,7 @@ static struct ata_port_operations opti82c46x_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = opti82c46x_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1958c4ed09a8..3c65393c1f01 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -18,7 +18,7 @@
  * The driver conciously keeps this logic internally to avoid pushing quirky
  * PATA history into the clean libata layer.
  *
- * Thinkpad specific note: If you boot an MPIIX using thinkpad with a PCMCIA
+ * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
  * hard disk present this driver will not detect it. This is not a bug. In this
  * configuration the secondary port of the MPIIX is disabled and the addresses
  * are decoded by the PCMCIA bridge and therefore are for a generic IDE driver
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.1"
+#define DRV_VERSION "0.7.2"
 
 enum {
         IDETIM = 0x6C,          /* IDE control register */
@@ -54,11 +54,8 @@ static int mpiix_pre_reset(struct ata_port *ap)
                 { 0x6F, 1, 0x80, 0x80 }
         };
 
-        if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
+                return -ENOENT;
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 16cb254cb973..76eb9c90bee1 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -90,8 +90,7 @@ static const struct ata_port_operations netcell_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        /* Timeout handling. Special recovery hooks here */
-        .eng_timeout            = ata_eng_timeout,
+        /* IRQ-related hooks */
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 93d6646d2954..2005a95f48f6 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -45,11 +45,8 @@ static int ns87410_pre_reset(struct ata_port *ap)
                 { 0x47, 1, 0x08, 0x08 }
         };
 
-        if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
+                return -ENOENT;
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -179,7 +176,7 @@ static struct ata_port_operations ns87410_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ns87410_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 04c618a2664b..31a285ca88dc 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_oldpiix"
-#define DRV_VERSION     "0.5.1"
+#define DRV_VERSION     "0.5.2"
 
 /**
  *      oldpiix_pre_reset               -       probe begin
@@ -42,11 +42,8 @@ static int oldpiix_pre_reset(struct ata_port *ap)
                 { 0x43U, 1U, 0x80UL, 0x80UL },  /* port 1 */
         };
 
-        if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
+                return -ENOENT;
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c3d01325e0e2..57fe21f3a975 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.2.5"
 
 enum {
         READ_REG        = 0,    /* index of Read cycle timing register */
@@ -59,11 +59,9 @@ static int opti_pre_reset(struct ata_port *ap)
                 { 0x40, 1, 0x08, 0x00 }
         };
 
-        if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -229,7 +227,7 @@ static struct ata_port_operations opti_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 177a455f4251..7296a20cd107 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
 
 enum {
         READ_REG        = 0,    /* index of Read cycle timing register */
@@ -59,11 +59,9 @@ static int optidma_pre_reset(struct ata_port *ap)
                 0x40, 1, 0x08, 0x00
         };
 
-        if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
+                return -ENOENT;
+
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -388,7 +386,7 @@ static struct ata_port_operations optidma_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -423,7 +421,7 @@ static struct ata_port_operations optiplus_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 62b25cda409b..cb501e145a42 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -87,7 +87,7 @@ static struct ata_port_operations pcmcia_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer_noirq,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 31ab9c886209..bd4ed6734edc 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -36,7 +36,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME        "pata_pdc2027x"
-#define DRV_VERSION     "0.74-ac3"
+#define DRV_VERSION     "0.74-ac5"
 #undef PDC_DEBUG
 
 #ifdef PDC_DEBUG
@@ -311,10 +311,8 @@ static inline int pdc2027x_port_enabled(struct ata_port *ap)
 static int pdc2027x_prereset(struct ata_port *ap)
 {
         /* Check whether port enabled */
-        if (!pdc2027x_port_enabled(ap)) {
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pdc2027x_port_enabled(ap))
+                return -ENOENT;
         pdc2027x_cbl_detect(ap);
         return ata_std_prereset(ap);
 }
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 35cfdf0ac3f0..7977f471d5e9 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -184,7 +184,7 @@ static struct ata_port_operations qdi6500_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = qdi_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = qdi_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -212,7 +212,7 @@ static struct ata_port_operations qdi6580_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = qdi_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = qdi_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 277f8411b521..c20bcf43ed6d 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -255,8 +255,6 @@ static const struct ata_port_operations radisys_pata_ops = {
         .qc_issue               = radisys_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 3c6d84fd4312..eccc6fd45032 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -112,7 +112,7 @@ static struct ata_port_operations rz1000_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .freeze         = ata_bmdma_freeze,
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 4166c1a8a9e8..107e6cd3dc0d 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -217,7 +217,7 @@ static struct ata_port_operations sc1200_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = sc1200_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index af456113c55d..a5c8d7e121d1 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.6"
+#define DRV_VERSION "0.3.7"
 
 #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION     0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
@@ -128,7 +128,7 @@ static struct sv_cable_table cable_detect[] = {
         { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
         { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
         { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN,  sun_cable },
-        { PCI_DEVICE_ID_SERVERWORKS_OSB4, PCI_ANY_ID, osb4_cable },
+        { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
         { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
         { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
         { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
@@ -352,10 +352,12 @@ static struct ata_port_operations serverworks_osb4_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
+        .irq_clear      = ata_bmdma_irq_clear,
+
         .port_start     = ata_port_start,
         .port_stop      = ata_port_stop,
         .host_stop      = ata_host_stop
@@ -385,10 +387,12 @@ static struct ata_port_operations serverworks_csb_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
+        .irq_clear      = ata_bmdma_irq_clear,
+
         .port_start     = ata_port_start,
         .port_stop      = ata_port_stop,
         .host_stop      = ata_host_stop
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 8f7db9638d0a..c8b2e26db70d 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -251,7 +251,7 @@ static struct ata_port_operations sil680_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 2e555168b431..17791e2785f9 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -34,7 +34,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_sis"
-#define DRV_VERSION     "0.4.3"
+#define DRV_VERSION     "0.4.4"
 
 struct sis_chipset {
         u16 device;                     /* PCI host ID */
@@ -74,11 +74,9 @@ static int sis_133_pre_reset(struct ata_port *ap)
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         u16 tmp;
 
-        if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
+                return -ENOENT;
+
         /* The top bit of this register is the cable detect bit */
         pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
         if (tmp & 0x8000)
@@ -575,8 +573,6 @@ static const struct ata_port_operations sis_133_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
@@ -610,8 +606,6 @@ static const struct ata_port_operations sis_133_early_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
@@ -646,8 +640,6 @@ static const struct ata_port_operations sis_100_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
@@ -681,8 +673,6 @@ static const struct ata_port_operations sis_66_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
@@ -716,8 +706,6 @@ static const struct ata_port_operations sis_old_ops = {
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_pio_data_xfer,
 
-        .eng_timeout            = ata_eng_timeout,
-
         .irq_handler            = ata_interrupt,
         .irq_clear              = ata_bmdma_irq_clear,
 
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index f8499786917a..5b762acc5687 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -19,7 +19,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
 
 enum {
         /*
@@ -49,11 +49,8 @@ static int sl82c105_pre_reset(struct ata_port *ap)
         };
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-        if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n");
-                return 0;
-        }
+        if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
+                return -ENOENT;
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -264,7 +261,7 @@ static struct ata_port_operations sl82c105_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 36f788728f3f..a954ed93a40c 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -46,13 +46,13 @@
 #define DRV_VERSION "0.2.5"
 
 /**
- *      triflex_probe_init              -       probe begin
+ *      triflex_prereset                -       probe begin
  *      @ap: ATA port
  *
  *      Set up cable type and use generic probe init
  */
 
-static int triflex_probe_init(struct ata_port *ap)
+static int triflex_prereset(struct ata_port *ap)
 {
         static const struct pci_bits triflex_enable_bits[] = {
                 { 0x80, 1, 0x01, 0x01 },
@@ -61,11 +61,8 @@ static int triflex_probe_init(struct ata_port *ap)
 
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-        if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) {
-                ata_port_disable(ap);
-                printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                return 0;
-        }
+        if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
+                return -ENOENT;
         ap->cbl = ATA_CBL_PATA40;
         return ata_std_prereset(ap);
 }
@@ -74,7 +71,7 @@ static int triflex_probe_init(struct ata_port *ap)
 
 static void triflex_error_handler(struct ata_port *ap)
 {
-        ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset);
+        ata_bmdma_drive_eh(ap, triflex_prereset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
 /**
@@ -221,7 +218,7 @@ static struct ata_port_operations triflex_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 1b2ff133b163..7b5dd2343b9a 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -60,7 +60,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.1.13"
+#define DRV_VERSION "0.1.14"
 
 /*
  *      The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -155,11 +155,8 @@ static int via_pre_reset(struct ata_port *ap)
 
                 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-                if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) {
-                        ata_port_disable(ap);
-                        printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-                        return 0;
-                }
+                if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
+                        return -ENOENT;
         }
 
         if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)
@@ -325,7 +322,7 @@ static struct ata_port_operations via_port_ops = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer,
 
         .irq_handler    = ata_interrupt,
@@ -360,7 +357,7 @@ static struct ata_port_operations via_port_ops_noirq = {
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
-        .eng_timeout    = ata_eng_timeout,
+
         .data_xfer      = ata_pio_data_xfer_noirq,
 
         .irq_handler    = ata_interrupt,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index fdce6e07ecd2..c01496df4a99 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -463,6 +463,7 @@ static const struct ata_port_operations mv_iie_ops = {
 
         .qc_prep                = mv_qc_prep_iie,
         .qc_issue               = mv_qc_issue,
+        .data_xfer              = ata_mmio_data_xfer,
 
         .eng_timeout            = mv_eng_timeout,
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 27c22feebf30..8cd730fe5dd3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -484,7 +484,7 @@ static void nv_error_handler(struct ata_port *ap)
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version = 0;
-        struct ata_port_info *ppi;
+        struct ata_port_info *ppi[2];
         struct ata_probe_ent *probe_ent;
         int pci_dev_busy = 0;
         int rc;
@@ -520,8 +520,8 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
         rc = -ENOMEM;
 
-        ppi = &nv_port_info[ent->driver_data];
-        probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+        ppi[0] = ppi[1] = &nv_port_info[ent->driver_data];
+        probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
         if (!probe_ent)
                 goto err_out_regions;
 
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 9b17375d8056..18d49fff8dc4 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -240,7 +240,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         struct ata_probe_ent *probe_ent = NULL;
         int rc;
         u32 genctl;
-        struct ata_port_info *ppi;
+        struct ata_port_info *ppi[2];
         int pci_dev_busy = 0;
         u8 pmr;
         u8 port2_start;
@@ -265,8 +265,8 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         if (rc)
                 goto err_out_regions;
 
-        ppi = &sis_port_info;
-        probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+        ppi[0] = ppi[1] = &sis_port_info;
+        probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
         if (!probe_ent) {
                 rc = -ENOMEM;
                 goto err_out_regions;
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 8fc6e800011a..dd76f37be182 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -185,7 +185,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version;
         struct ata_probe_ent *probe_ent;
-        struct ata_port_info *ppi;
+        struct ata_port_info *ppi[2];
         int rc;
         unsigned int board_idx = (unsigned int) ent->driver_data;
         int pci_dev_busy = 0;
@@ -211,8 +211,8 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         if (rc)
                 goto err_out_regions;
 
-        ppi = &uli_port_info;
-        probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+        ppi[0] = ppi[1] = &uli_port_info;
+        probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
         if (!probe_ent) {
                 rc = -ENOMEM;
                 goto err_out_regions;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 7f087aef99de..a72a2389a11c 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -318,9 +318,10 @@ static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
 static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
 {
         struct ata_probe_ent *probe_ent;
-        struct ata_port_info *ppi = &vt6420_port_info;
-
-        probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+        struct ata_port_info *ppi[2];
+        
+        ppi[0] = ppi[1] = &vt6420_port_info;
+        probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
         if (!probe_ent)
                 return NULL;