Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/ata/libata-scsi.c
	include/linux/libata.h

Futher merge of Linus's head and compilation fixups.

Signed-Off-By: David Howells <dhowells@redhat.com>

56 files changed, 3769 insertions, 942 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 03f6338acc8f..984ab284382a 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -328,6 +328,15 @@ config PATA_TRIFLEX
 
           If unsure, say N.
 
+config PATA_MARVELL
+        tristate "Marvell PATA support via legacy mode"
+        depends on PCI
+        help
+          This option enables limited support for the Marvell 88SE6145 ATA
+          controller.
+
+          If unsure, say N.
+
 config PATA_MPIIX
         tristate "Intel PATA MPIIX support"
         depends on PCI
@@ -483,6 +492,32 @@ config PATA_WINBOND
 
           If unsure, say N.
 
+config PATA_WINBOND_VLB
+        tristate "Winbond W83759A VLB PATA support (Experimental)"
+        depends on ISA && EXPERIMENTAL
+        help
+          Support for the Winbond W83759A controller on Vesa Local Bus
+          systems.
+
+config PATA_PLATFORM
+        tristate "Generic platform device PATA support"
+        depends on EMBEDDED
+        help
+          This option enables support for generic directly connected ATA
+          devices commonly found on embedded systems.
+
+          If unsure, say N.
+
+config PATA_IXP4XX_CF
+        tristate "IXP4XX Compact Flash support"
+        depends on ARCH_IXP4XX
+        help
+          This option enables support for a Compact Flash connected on
+          the ixp4xx expansion bus. This driver had been written for
+          Loft/Avila boards in mind but can work with others.
+
+          If unsure, say N.
+
 endif
 endmenu
 
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 72243a677f9b..bc3d81ae757e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
 obj-$(CONFIG_PATA_NS87410)      += pata_ns87410.o
 obj-$(CONFIG_PATA_OPTI)         += pata_opti.o
 obj-$(CONFIG_PATA_OPTIDMA)      += pata_optidma.o
+obj-$(CONFIG_PATA_MARVELL)      += pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)        += pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)      += pata_oldpiix.o
 obj-$(CONFIG_PATA_PCMCIA)       += pata_pcmcia.o
@@ -51,8 +52,11 @@ obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
 obj-$(CONFIG_PATA_SIL680)       += pata_sil680.o
 obj-$(CONFIG_PATA_VIA)          += pata_via.o
 obj-$(CONFIG_PATA_WINBOND)      += pata_sl82c105.o
+obj-$(CONFIG_PATA_WINBOND_VLB)  += pata_winbond.o
 obj-$(CONFIG_PATA_SIS)          += pata_sis.o
 obj-$(CONFIG_PATA_TRIFLEX)      += pata_triflex.o
+obj-$(CONFIG_PATA_IXP4XX_CF)    += pata_ixp4xx_cf.o
+obj-$(CONFIG_PATA_PLATFORM)     += pata_platform.o
 # Should be last but one libata driver
 obj-$(CONFIG_ATA_GENERIC)       += ata_generic.o
 # Should be last libata driver
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index bddb14e91d3c..f36da488a2c1 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -53,6 +53,7 @@
 
 enum {
         AHCI_PCI_BAR            = 5,
+        AHCI_MAX_PORTS          = 32,
         AHCI_MAX_SG             = 168, /* hardware max is 64K */
         AHCI_DMA_BOUNDARY       = 0xffffffff,
         AHCI_USE_CLUSTERING     = 0,
@@ -77,8 +78,9 @@ enum {
         RX_FIS_UNK              = 0x60, /* offset of Unknown FIS data */
 
         board_ahci              = 0,
-        board_ahci_vt8251       = 1,
-        board_ahci_ign_iferr    = 2,
+        board_ahci_pi           = 1,
+        board_ahci_vt8251       = 2,
+        board_ahci_ign_iferr    = 3,
 
         /* global controller registers */
         HOST_CAP                = 0x00, /* host capabilities */
@@ -167,9 +169,9 @@ enum {
         AHCI_FLAG_MSI           = (1 << 0),
 
         /* ap->flags bits */
-        AHCI_FLAG_RESET_NEEDS_CLO       = (1 << 24),
-        AHCI_FLAG_NO_NCQ                = (1 << 25),
-        AHCI_FLAG_IGN_IRQ_IF_ERR        = (1 << 26), /* ignore IRQ_IF_ERR */
+        AHCI_FLAG_NO_NCQ                = (1 << 24),
+        AHCI_FLAG_IGN_IRQ_IF_ERR        = (1 << 25), /* ignore IRQ_IF_ERR */
+        AHCI_FLAG_HONOR_PI              = (1 << 26), /* honor PORTS_IMPL */
 };
 
 struct ahci_cmd_hdr {
@@ -216,6 +218,7 @@ static u8 ahci_check_status(struct ata_port *ap);
 static void ahci_freeze(struct ata_port *ap);
 static void ahci_thaw(struct ata_port *ap);
 static void ahci_error_handler(struct ata_port *ap);
+static void ahci_vt8251_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
 static int ahci_port_resume(struct ata_port *ap);
@@ -275,6 +278,37 @@ static const struct ata_port_operations ahci_ops = {
         .port_stop              = ahci_port_stop,
 };
 
+static const struct ata_port_operations ahci_vt8251_ops = {
+        .port_disable           = ata_port_disable,
+
+        .check_status           = ahci_check_status,
+        .check_altstatus        = ahci_check_status,
+        .dev_select             = ata_noop_dev_select,
+
+        .tf_read                = ahci_tf_read,
+
+        .qc_prep                = ahci_qc_prep,
+        .qc_issue               = ahci_qc_issue,
+
+        .irq_handler            = ahci_interrupt,
+        .irq_clear              = ahci_irq_clear,
+
+        .scr_read               = ahci_scr_read,
+        .scr_write              = ahci_scr_write,
+
+        .freeze                 = ahci_freeze,
+        .thaw                   = ahci_thaw,
+
+        .error_handler          = ahci_vt8251_error_handler,
+        .post_internal_cmd      = ahci_post_internal_cmd,
+
+        .port_suspend           = ahci_port_suspend,
+        .port_resume            = ahci_port_resume,
+
+        .port_start             = ahci_port_start,
+        .port_stop              = ahci_port_stop,
+};
+
 static const struct ata_port_info ahci_port_info[] = {
         /* board_ahci */
         {
@@ -286,16 +320,26 @@ static const struct ata_port_info ahci_port_info[] = {
                 .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
                 .port_ops       = &ahci_ops,
         },
+        /* board_ahci_pi */
+        {
+                .sht            = &ahci_sht,
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+                                  ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI,
+                .pio_mask       = 0x1f, /* pio0-4 */
+                .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
+                .port_ops       = &ahci_ops,
+        },
         /* board_ahci_vt8251 */
         {
                 .sht            = &ahci_sht,
                 .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
                                   ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
                                   ATA_FLAG_SKIP_D2H_BSY |
-                                  AHCI_FLAG_RESET_NEEDS_CLO | AHCI_FLAG_NO_NCQ,
+                                  ATA_FLAG_HRST_TO_RESUME | AHCI_FLAG_NO_NCQ,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .udma_mask      = 0x7f, /* udma0-6 ; FIXME */
-                .port_ops       = &ahci_ops,
+                .port_ops       = &ahci_vt8251_ops,
         },
         /* board_ahci_ign_iferr */
         {
@@ -322,22 +366,22 @@ static const struct pci_device_id ahci_pci_tbl[] = {
         { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
         { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
         { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
-        { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
-        { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
-        { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
-        { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
-        { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
-        { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
-        { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
-        { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
-        { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
-        { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
-        { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
-        { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
-        { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
-        { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
-        { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
-        { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
+        { PCI_VDEVICE(INTEL, 0x2821), board_ahci_pi }, /* ICH8 */
+        { PCI_VDEVICE(INTEL, 0x2822), board_ahci_pi }, /* ICH8 */
+        { PCI_VDEVICE(INTEL, 0x2824), board_ahci_pi }, /* ICH8 */
+        { PCI_VDEVICE(INTEL, 0x2829), board_ahci_pi }, /* ICH8M */
+        { PCI_VDEVICE(INTEL, 0x282a), board_ahci_pi }, /* ICH8M */
+        { PCI_VDEVICE(INTEL, 0x2922), board_ahci_pi }, /* ICH9 */
+        { PCI_VDEVICE(INTEL, 0x2923), board_ahci_pi }, /* ICH9 */
+        { PCI_VDEVICE(INTEL, 0x2924), board_ahci_pi }, /* ICH9 */
+        { PCI_VDEVICE(INTEL, 0x2925), board_ahci_pi }, /* ICH9 */
+        { PCI_VDEVICE(INTEL, 0x2927), board_ahci_pi }, /* ICH9 */
+        { PCI_VDEVICE(INTEL, 0x2929), board_ahci_pi }, /* ICH9M */
+        { PCI_VDEVICE(INTEL, 0x292a), board_ahci_pi }, /* ICH9M */
+        { PCI_VDEVICE(INTEL, 0x292b), board_ahci_pi }, /* ICH9M */
+        { PCI_VDEVICE(INTEL, 0x292f), board_ahci_pi }, /* ICH9M */
+        { PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
+        { PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
 
         /* JMicron */
         { PCI_VDEVICE(JMICRON, 0x2360), board_ahci_ign_iferr }, /* JMB360 */
@@ -372,6 +416,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
         { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
         { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
 
+        /* Generic, PCI class code for AHCI */
+        { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+          0x010601, 0xffffff, board_ahci },
+
         { }     /* terminate list */
 };
 
@@ -386,6 +434,11 @@ static struct pci_driver ahci_pci_driver = {
 };
 
 
+static inline int ahci_nr_ports(u32 cap)
+{
+        return (cap & 0x1f) + 1;
+}
+
 static inline unsigned long ahci_port_base_ul (unsigned long base, unsigned int port)
 {
         return base + 0x100 + (port * 0x80);
@@ -559,9 +612,6 @@ static void ahci_power_down(void __iomem *port_mmio, u32 cap)
 static void ahci_init_port(void __iomem *port_mmio, u32 cap,
                            dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
 {
-        /* power up */
-        ahci_power_up(port_mmio, cap);
-
         /* enable FIS reception */
         ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma);
 
@@ -587,19 +637,17 @@ static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
                 return rc;
         }
 
-        /* put device into slumber mode */
-        ahci_power_down(port_mmio, cap);
-
         return 0;
 }
 
 static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 {
-        u32 cap_save, tmp;
+        u32 cap_save, impl_save, tmp;
 
         cap_save = readl(mmio + HOST_CAP);
         cap_save &= ( (1<<28) | (1<<17) );
         cap_save |= (1 << 27);
+        impl_save = readl(mmio + HOST_PORTS_IMPL);
 
         /* global controller reset */
         tmp = readl(mmio + HOST_CTL);
@@ -620,10 +668,21 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
                 return -EIO;
         }
 
+        /* turn on AHCI mode */
         writel(HOST_AHCI_EN, mmio + HOST_CTL);
         (void) readl(mmio + HOST_CTL);  /* flush */
+
+        /* These write-once registers are normally cleared on reset.
+         * Restore BIOS values... which we HOPE were present before
+         * reset.
+         */
+        if (!impl_save) {
+                impl_save = (1 << ahci_nr_ports(cap_save)) - 1;
+                dev_printk(KERN_WARNING, &pdev->dev,
+                           "PORTS_IMPL is zero, forcing 0x%x\n", impl_save);
+        }
         writel(cap_save, mmio + HOST_CAP);
-        writel(0xf, mmio + HOST_PORTS_IMPL);
+        writel(impl_save, mmio + HOST_PORTS_IMPL);
         (void) readl(mmio + HOST_PORTS_IMPL);   /* flush */
 
         if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
@@ -639,7 +698,8 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 }
 
 static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
-                                 int n_ports, u32 cap)
+                                 int n_ports, unsigned int port_flags,
+                                 struct ahci_host_priv *hpriv)
 {
         int i, rc;
         u32 tmp;
@@ -648,13 +708,12 @@ static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
                 void __iomem *port_mmio = ahci_port_base(mmio, i);
                 const char *emsg = NULL;
 
-#if 0 /* BIOSen initialize this incorrectly */
-                if (!(hpriv->port_map & (1 << i)))
+                if ((port_flags & AHCI_FLAG_HONOR_PI) &&
+                    !(hpriv->port_map & (1 << i)))
                         continue;
-#endif
 
                 /* make sure port is not active */
-                rc = ahci_deinit_port(port_mmio, cap, &emsg);
+                rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
                 if (rc)
                         dev_printk(KERN_WARNING, &pdev->dev,
                                    "%s (%d)\n", emsg, rc);
@@ -729,17 +788,6 @@ static int ahci_clo(struct ata_port *ap)
         return 0;
 }
 
-static int ahci_prereset(struct ata_port *ap)
-{
-        if ((ap->flags & AHCI_FLAG_RESET_NEEDS_CLO) &&
-            (ata_busy_wait(ap, ATA_BUSY, 1000) & ATA_BUSY)) {
-                /* ATA_BUSY hasn't cleared, so send a CLO */
-                ahci_clo(ap);
-        }
-
-        return ata_std_prereset(ap);
-}
-
 static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 {
         struct ahci_port_priv *pp = ap->private_data;
@@ -877,6 +925,31 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
         return rc;
 }
 
+static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class)
+{
+        void __iomem *mmio = ap->host->mmio_base;
+        void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+        int rc;
+
+        DPRINTK("ENTER\n");
+
+        ahci_stop_engine(port_mmio);
+
+        rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context));
+
+        /* vt8251 needs SError cleared for the port to operate */
+        ahci_scr_write(ap, SCR_ERROR, ahci_scr_read(ap, SCR_ERROR));
+
+        ahci_start_engine(port_mmio);
+
+        DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+
+        /* vt8251 doesn't clear BSY on signature FIS reception,
+         * request follow-up softreset.
+         */
+        return rc ?: -EAGAIN;
+}
+
 static void ahci_postreset(struct ata_port *ap, unsigned int *class)
 {
         void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
@@ -1196,7 +1269,23 @@ static void ahci_error_handler(struct ata_port *ap)
         }
 
         /* perform recovery */
-        ata_do_eh(ap, ahci_prereset, ahci_softreset, ahci_hardreset,
+        ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_hardreset,
+                  ahci_postreset);
+}
+
+static void ahci_vt8251_error_handler(struct ata_port *ap)
+{
+        void __iomem *mmio = ap->host->mmio_base;
+        void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+
+        if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+                /* restart engine */
+                ahci_stop_engine(port_mmio);
+                ahci_start_engine(port_mmio);
+        }
+
+        /* perform recovery */
+        ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
                   ahci_postreset);
 }
 
@@ -1226,7 +1315,9 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
         int rc;
 
         rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
-        if (rc) {
+        if (rc == 0)
+                ahci_power_down(port_mmio, hpriv->cap);
+        else {
                 ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
                 ahci_init_port(port_mmio, hpriv->cap,
                                pp->cmd_slot_dma, pp->rx_fis_dma);
@@ -1242,6 +1333,7 @@ static int ahci_port_resume(struct ata_port *ap)
         void __iomem *mmio = ap->host->mmio_base;
         void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 
+        ahci_power_up(port_mmio, hpriv->cap);
         ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
 
         return 0;
@@ -1281,7 +1373,8 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
                 if (rc)
                         return rc;
 
-                ahci_init_controller(mmio, pdev, host->n_ports, hpriv->cap);
+                ahci_init_controller(mmio, pdev, host->n_ports,
+                                     host->ports[0]->flags, hpriv);
         }
 
         ata_host_resume(host);
@@ -1347,6 +1440,9 @@ static int ahci_port_start(struct ata_port *ap)
 
         ap->private_data = pp;
 
+        /* power up port */
+        ahci_power_up(port_mmio, hpriv->cap);
+
         /* initialize port */
         ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
 
@@ -1393,7 +1489,7 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
         struct ahci_host_priv *hpriv = probe_ent->private_data;
         struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
         void __iomem *mmio = probe_ent->mmio_base;
-        unsigned int i, using_dac;
+        unsigned int i, cap_n_ports, using_dac;
         int rc;
 
         rc = ahci_reset_controller(mmio, pdev);
@@ -1402,10 +1498,34 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 
         hpriv->cap = readl(mmio + HOST_CAP);
         hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
-        probe_ent->n_ports = (hpriv->cap & 0x1f) + 1;
+        cap_n_ports = ahci_nr_ports(hpriv->cap);
 
         VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n",
-                hpriv->cap, hpriv->port_map, probe_ent->n_ports);
+                hpriv->cap, hpriv->port_map, cap_n_ports);
+
+        if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
+                unsigned int n_ports = cap_n_ports;
+                u32 port_map = hpriv->port_map;
+                int max_port = 0;
+
+                for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
+                        if (port_map & (1 << i)) {
+                                n_ports--;
+                                port_map &= ~(1 << i);
+                                max_port = i;
+                        } else
+                                probe_ent->dummy_port_mask |= 1 << i;
+                }
+
+                if (n_ports || port_map)
+                        dev_printk(KERN_WARNING, &pdev->dev,
+                                   "nr_ports (%u) and implemented port map "
+                                   "(0x%x) don't match\n",
+                                   cap_n_ports, hpriv->port_map);
+
+                probe_ent->n_ports = max_port + 1;
+        } else
+                probe_ent->n_ports = cap_n_ports;
 
         using_dac = hpriv->cap & HOST_CAP_64;
         if (using_dac &&
@@ -1437,7 +1557,8 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
         for (i = 0; i < probe_ent->n_ports; i++)
                 ahci_setup_port(&probe_ent->port[i], (unsigned long) mmio, i);
 
-        ahci_init_controller(mmio, pdev, probe_ent->n_ports, hpriv->cap);
+        ahci_init_controller(mmio, pdev, probe_ent->n_ports,
+                             probe_ent->port_flags, hpriv);
 
         pci_set_master(pdev);
 
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 4a80ff9312b8..908751d27e76 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.6"
+#define DRV_VERSION "0.2.10"
 
 /*
  *      A generic parallel ATA driver using libata
@@ -109,7 +109,6 @@ static struct scsi_host_template generic_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -118,6 +117,8 @@ static struct scsi_host_template generic_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations generic_port_ops = {
@@ -226,12 +227,14 @@ static struct pci_driver ata_generic_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = ata_generic,
         .probe          = ata_generic_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init ata_generic_init(void)
 {
-        return pci_module_init(&ata_generic_pci_driver);
+        return pci_register_driver(&ata_generic_pci_driver);
 }
 
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 720174d628fa..c7de0bb1591f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -40,7 +40,7 @@
  * Documentation
  *      Publically available from Intel web site. Errata documentation
  * is also publically available. As an aide to anyone hacking on this
- * driver the list of errata that are relevant is below.going back to
+ * driver the list of errata that are relevant is below, going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
  * The chipsets all follow very much the same design. The orginal Triton
@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "ata_piix"
-#define DRV_VERSION     "2.00ac6"
+#define DRV_VERSION     "2.00ac7"
 
 enum {
         PIIX_IOCFG              = 0x54, /* IDE I/O configuration register */
@@ -101,11 +101,13 @@ enum {
         ICH5_PCS                = 0x92, /* port control and status */
         PIIX_SCC                = 0x0A, /* sub-class code register */
 
-        PIIX_FLAG_IGNORE_PCS    = (1 << 25), /* ignore PCS present bits */
         PIIX_FLAG_SCR           = (1 << 26), /* SCR available */
         PIIX_FLAG_AHCI          = (1 << 27), /* AHCI possible */
         PIIX_FLAG_CHECKINTR     = (1 << 28), /* make sure PCI INTx enabled */
 
+        PIIX_PATA_FLAGS         = ATA_FLAG_SLAVE_POSS,
+        PIIX_SATA_FLAGS         = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+
         /* combined mode.  if set, PATA is channel 0.
          * if clear, PATA is channel 1.
          */
@@ -122,11 +124,10 @@ enum {
         ich_pata_100            = 3,    /* ICH up to UDMA 100 */
         ich_pata_133            = 4,    /* ICH up to UDMA 133 */
         ich5_sata               = 5,
-        esb_sata                = 6,
-        ich6_sata               = 7,
-        ich6_sata_ahci          = 8,
-        ich6m_sata_ahci         = 9,
-        ich8_sata_ahci          = 10,
+        ich6_sata               = 6,
+        ich6_sata_ahci          = 7,
+        ich6m_sata_ahci         = 8,
+        ich8_sata_ahci          = 9,
 
         /* constants for mapping table */
         P0                      = 0,  /* port 0 */
@@ -143,13 +144,11 @@ enum {
 struct piix_map_db {
         const u32 mask;
         const u16 port_enable;
-        const int present_shift;
         const int map[][4];
 };
 
 struct piix_host_priv {
         const int *map;
-        const struct piix_map_db *map_db;
 };
 
 static int piix_init_one (struct pci_dev *pdev,
@@ -214,9 +213,9 @@ static const struct pci_device_id piix_pci_tbl[] = {
         /* 82801EB (ICH5) */
         { 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
         /* 6300ESB (ICH5 variant with broken PCS present bits) */
-        { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata },
+        { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
         /* 6300ESB pretending RAID */
-        { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata },
+        { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
         /* 82801FB/FW (ICH6/ICH6W) */
         { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
         /* 82801FR/FRW (ICH6R/ICH6RW) */
@@ -367,7 +366,6 @@ static const struct ata_port_operations piix_sata_ops = {
 static const struct piix_map_db ich5_map_db = {
         .mask = 0x7,
         .port_enable = 0x3,
-        .present_shift = 4,
         .map = {
                 /* PM   PS   SM   SS       MAP  */
                 {  P0,  NA,  P1,  NA }, /* 000b */
@@ -384,7 +382,6 @@ static const struct piix_map_db ich5_map_db = {
 static const struct piix_map_db ich6_map_db = {
         .mask = 0x3,
         .port_enable = 0xf,
-        .present_shift = 4,
         .map = {
                 /* PM   PS   SM   SS       MAP */
                 {  P0,  P2,  P1,  P3 }, /* 00b */
@@ -397,7 +394,6 @@ static const struct piix_map_db ich6_map_db = {
 static const struct piix_map_db ich6m_map_db = {
         .mask = 0x3,
         .port_enable = 0x5,
-        .present_shift = 4,
 
         /* Map 01b isn't specified in the doc but some notebooks use
          * it anyway.  MAP 01b have been spotted on both ICH6M and
@@ -415,7 +411,6 @@ static const struct piix_map_db ich6m_map_db = {
 static const struct piix_map_db ich8_map_db = {
         .mask = 0x3,
         .port_enable = 0x3,
-        .present_shift = 8,
         .map = {
                 /* PM   PS   SM   SS       MAP */
                 {  P0,  P2,  P1,  P3 }, /* 00b (hardwired when in AHCI) */
@@ -427,7 +422,6 @@ static const struct piix_map_db ich8_map_db = {
 
 static const struct piix_map_db *piix_map_db_table[] = {
         [ich5_sata]             = &ich5_map_db,
-        [esb_sata]              = &ich5_map_db,
         [ich6_sata]             = &ich6_map_db,
         [ich6_sata_ahci]        = &ich6_map_db,
         [ich6m_sata_ahci]       = &ich6m_map_db,
@@ -438,7 +432,7 @@ static struct ata_port_info piix_port_info[] = {
         /* piix_pata_33: 0:  PIIX3 or 4 at 33MHz */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags          = PIIX_PATA_FLAGS,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
                 .udma_mask      = ATA_UDMA_MASK_40C,
@@ -448,7 +442,7 @@ static struct ata_port_info piix_port_info[] = {
         /* ich_pata_33: 1       ICH0 - ICH at 33Mhz*/
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS,
+                .flags          = PIIX_PATA_FLAGS,
                 .pio_mask       = 0x1f, /* pio 0-4 */
                 .mwdma_mask     = 0x06, /* Check: maybe 0x07  */
                 .udma_mask      = ATA_UDMA2, /* UDMA33 */
@@ -457,7 +451,7 @@ static struct ata_port_info piix_port_info[] = {
         /* ich_pata_66: 2       ICH controllers up to 66MHz */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS,
+                .flags          = PIIX_PATA_FLAGS,
                 .pio_mask       = 0x1f, /* pio 0-4 */
                 .mwdma_mask     = 0x06, /* MWDMA0 is broken on chip */
                 .udma_mask      = ATA_UDMA4,
@@ -467,7 +461,7 @@ static struct ata_port_info piix_port_info[] = {
         /* ich_pata_100: 3 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
+                .flags          = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x06, /* mwdma1-2 */
                 .udma_mask      = ATA_UDMA5, /* udma0-5 */
@@ -477,7 +471,7 @@ static struct ata_port_info piix_port_info[] = {
         /* ich_pata_133: 4      ICH with full UDMA6 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
+                .flags          = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
                 .pio_mask       = 0x1f, /* pio 0-4 */
                 .mwdma_mask     = 0x06, /* Check: maybe 0x07  */
                 .udma_mask      = ATA_UDMA6, /* UDMA133 */
@@ -487,41 +481,27 @@ static struct ata_port_info piix_port_info[] = {
         /* ich5_sata: 5 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR |
-                                  PIIX_FLAG_IGNORE_PCS,
-                .pio_mask       = 0x1f, /* pio0-4 */
-                .mwdma_mask     = 0x07, /* mwdma0-2 */
-                .udma_mask      = 0x7f, /* udma0-6 */
-                .port_ops       = &piix_sata_ops,
-        },
-
-        /* i6300esb_sata: 6 */
-        {
-                .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SATA |
-                                  PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS,
+                .flags          = PIIX_SATA_FLAGS,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
                 .udma_mask      = 0x7f, /* udma0-6 */
                 .port_ops       = &piix_sata_ops,
         },
 
-        /* ich6_sata: 7 */
+        /* ich6_sata: 6 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SATA |
-                                  PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR,
+                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
                 .udma_mask      = 0x7f, /* udma0-6 */
                 .port_ops       = &piix_sata_ops,
         },
 
-        /* ich6_sata_ahci: 8 */
+        /* ich6_sata_ahci: 7 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SATA |
-                                  PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
                                   PIIX_FLAG_AHCI,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
@@ -529,11 +509,10 @@ static struct ata_port_info piix_port_info[] = {
                 .port_ops       = &piix_sata_ops,
         },
 
-        /* ich6m_sata_ahci: 9 */
+        /* ich6m_sata_ahci: 8 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SATA |
-                                  PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
                                   PIIX_FLAG_AHCI,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
@@ -541,11 +520,10 @@ static struct ata_port_info piix_port_info[] = {
                 .port_ops       = &piix_sata_ops,
         },
 
-        /* ich8_sata_ahci: 10 */
+        /* ich8_sata_ahci: 9 */
         {
                 .sht            = &piix_sht,
-                .flags          = ATA_FLAG_SATA |
-                                  PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+                .flags          = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
                                   PIIX_FLAG_AHCI,
                 .pio_mask       = 0x1f, /* pio0-4 */
                 .mwdma_mask     = 0x07, /* mwdma0-2 */
@@ -566,10 +544,22 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
-static int force_pcs = 0;
-module_param(force_pcs, int, 0444);
-MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around "
-                 "device mis-detection (0=default, 1=ignore PCS, 2=honor PCS)");
+struct ich_laptop {
+        u16 device;
+        u16 subvendor;
+        u16 subdevice;
+};
+
+/*
+ *      List of laptops that use short cables rather than 80 wire
+ */
+
+static const struct ich_laptop ich_laptop[] = {
+        /* devid, subvendor, subdev */
+        { 0x27DF, 0x0005, 0x0280 },     /* ICH7 on Acer 5602WLMi */
+        /* end marker */
+        { 0, }
+};
 
 /**
  *      piix_pata_cbl_detect - Probe host controller cable detect info
@@ -585,12 +575,24 @@ MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around "
 static void ich_pata_cbl_detect(struct ata_port *ap)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        const struct ich_laptop *lap = &ich_laptop[0];
         u8 tmp, mask;
 
         /* no 80c support in host controller? */
         if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
                 goto cbl40;
 
+        /* Check for specials - Acer Aspire 5602WLMi */
+        while (lap->device) {
+                if (lap->device == pdev->device &&
+                    lap->subvendor == pdev->subsystem_vendor &&
+                    lap->subdevice == pdev->subsystem_device) {
+                        ap->cbl = ATA_CBL_PATA40_SHORT;
+                        return;
+                }
+                lap++;
+        }
+
         /* check BIOS cable detect results */
         mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
         pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
@@ -659,84 +661,9 @@ static void ich_pata_error_handler(struct ata_port *ap)
                            ata_std_postreset);
 }
 
-/**
- *      piix_sata_present_mask - determine present mask for SATA host controller
- *      @ap: Target port
- *
- *      Reads SATA PCI device's PCI config register Port Configuration
- *      and Status (PCS) to determine port and device availability.
- *
- *      LOCKING:
- *      None (inherited from caller).
- *
- *      RETURNS:
- *      determined present_mask
- */
-static unsigned int piix_sata_present_mask(struct ata_port *ap)
-{
-        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-        struct piix_host_priv *hpriv = ap->host->private_data;
-        const unsigned int *map = hpriv->map;
-        int base = 2 * ap->port_no;
-        unsigned int present_mask = 0;
-        int port, i;
-        u16 pcs;
-
-        pci_read_config_word(pdev, ICH5_PCS, &pcs);
-        DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base);
-
-        for (i = 0; i < 2; i++) {
-                port = map[base + i];
-                if (port < 0)
-                        continue;
-                if ((ap->flags & PIIX_FLAG_IGNORE_PCS) ||
-                    (pcs & 1 << (hpriv->map_db->present_shift + port)))
-                        present_mask |= 1 << i;
-        }
-
-        DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
-                ap->id, pcs, present_mask);
-
-        return present_mask;
-}
-
-/**
- *      piix_sata_softreset - reset SATA host port via ATA SRST
- *      @ap: port to reset
- *      @classes: resulting classes of attached devices
- *
- *      Reset SATA host port via ATA SRST.  On controllers with
- *      reliable PCS present bits, the bits are used to determine
- *      device presence.
- *
- *      LOCKING:
- *      Kernel thread context (may sleep)
- *
- *      RETURNS:
- *      0 on success, -errno otherwise.
- */
-static int piix_sata_softreset(struct ata_port *ap, unsigned int *classes)
-{
-        unsigned int present_mask;
-        int i, rc;
-
-        present_mask = piix_sata_present_mask(ap);
-
-        rc = ata_std_softreset(ap, classes);
-        if (rc)
-                return rc;
-
-        for (i = 0; i < ATA_MAX_DEVICES; i++) {
-                if (!(present_mask & (1 << i)))
-                        classes[i] = ATA_DEV_NONE;
-        }
-
-        return 0;
-}
-
 static void piix_sata_error_handler(struct ata_port *ap)
 {
-        ata_bmdma_drive_eh(ap, ata_std_prereset, piix_sata_softreset, NULL,
+        ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
                            ata_std_postreset);
 }
 
@@ -1051,18 +978,6 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev,
                 pci_write_config_word(pdev, ICH5_PCS, new_pcs);
                 msleep(150);
         }
-
-        if (force_pcs == 1) {
-                dev_printk(KERN_INFO, &pdev->dev,
-                           "force ignoring PCS (0x%x)\n", new_pcs);
-                pinfo[0].flags |= PIIX_FLAG_IGNORE_PCS;
-                pinfo[1].flags |= PIIX_FLAG_IGNORE_PCS;
-        } else if (force_pcs == 2) {
-                dev_printk(KERN_INFO, &pdev->dev,
-                           "force honoring PCS (0x%x)\n", new_pcs);
-                pinfo[0].flags &= ~PIIX_FLAG_IGNORE_PCS;
-                pinfo[1].flags &= ~PIIX_FLAG_IGNORE_PCS;
-        }
 }
 
 static void __devinit piix_init_sata_map(struct pci_dev *pdev,
@@ -1112,7 +1027,6 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
                            "invalid MAP value %u\n", map_value);
 
         hpriv->map = map;
-        hpriv->map_db = map_db;
 }
 
 /**
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b5f2da6ac80e..8816e30fb7a4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -199,7 +199,8 @@ static const u8 ata_rw_cmds[] = {
 
 /**
  *      ata_rwcmd_protocol - set taskfile r/w commands and protocol
- *      @qc: command to examine and configure
+ *      @tf: command to examine and configure
+ *      @dev: device tf belongs to
  *
  *      Examine the device configuration and tf->flags to calculate
  *      the proper read/write commands and protocol to use.
@@ -207,10 +208,8 @@ static const u8 ata_rw_cmds[] = {
  *      LOCKING:
  *      caller.
  */
-int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
+static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
 {
-        struct ata_taskfile *tf = &qc->tf;
-        struct ata_device *dev = qc->dev;
         u8 cmd;
 
         int index, fua, lba48, write;
@@ -222,7 +221,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
         if (dev->flags & ATA_DFLAG_PIO) {
                 tf->protocol = ATA_PROT_PIO;
                 index = dev->multi_count ? 0 : 8;
-        } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) {
+        } else if (lba48 && (dev->ap->flags & ATA_FLAG_PIO_LBA48)) {
                 /* Unable to use DMA due to host limitation */
                 tf->protocol = ATA_PROT_PIO;
                 index = dev->multi_count ? 0 : 8;
@@ -240,6 +239,174 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc)
 }
 
 /**
+ *      ata_tf_read_block - Read block address from ATA taskfile
+ *      @tf: ATA taskfile of interest
+ *      @dev: ATA device @tf belongs to
+ *
+ *      LOCKING:
+ *      None.
+ *
+ *      Read block address from @tf.  This function can handle all
+ *      three address formats - LBA, LBA48 and CHS.  tf->protocol and
+ *      flags select the address format to use.
+ *
+ *      RETURNS:
+ *      Block address read from @tf.
+ */
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
+{
+        u64 block = 0;
+
+        if (tf->flags & ATA_TFLAG_LBA) {
+                if (tf->flags & ATA_TFLAG_LBA48) {
+                        block |= (u64)tf->hob_lbah << 40;
+                        block |= (u64)tf->hob_lbam << 32;
+                        block |= tf->hob_lbal << 24;
+                } else
+                        block |= (tf->device & 0xf) << 24;
+
+                block |= tf->lbah << 16;
+                block |= tf->lbam << 8;
+                block |= tf->lbal;
+        } else {
+                u32 cyl, head, sect;
+
+                cyl = tf->lbam | (tf->lbah << 8);
+                head = tf->device & 0xf;
+                sect = tf->lbal;
+
+                block = (cyl * dev->heads + head) * dev->sectors + sect;
+        }
+
+        return block;
+}
+
+/**
+ *      ata_build_rw_tf - Build ATA taskfile for given read/write request
+ *      @tf: Target ATA taskfile
+ *      @dev: ATA device @tf belongs to
+ *      @block: Block address
+ *      @n_block: Number of blocks
+ *      @tf_flags: RW/FUA etc...
+ *      @tag: tag
+ *
+ *      LOCKING:
+ *      None.
+ *
+ *      Build ATA taskfile @tf for read/write request described by
+ *      @block, @n_block, @tf_flags and @tag on @dev.
+ *
+ *      RETURNS:
+ *
+ *      0 on success, -ERANGE if the request is too large for @dev,
+ *      -EINVAL if the request is invalid.
+ */
+int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
+                    u64 block, u32 n_block, unsigned int tf_flags,
+                    unsigned int tag)
+{
+        tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+        tf->flags |= tf_flags;
+
+        if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
+                           ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ &&
+            likely(tag != ATA_TAG_INTERNAL)) {
+                /* yay, NCQ */
+                if (!lba_48_ok(block, n_block))
+                        return -ERANGE;
+
+                tf->protocol = ATA_PROT_NCQ;
+                tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+
+                if (tf->flags & ATA_TFLAG_WRITE)
+                        tf->command = ATA_CMD_FPDMA_WRITE;
+                else
+                        tf->command = ATA_CMD_FPDMA_READ;
+
+                tf->nsect = tag << 3;
+                tf->hob_feature = (n_block >> 8) & 0xff;
+                tf->feature = n_block & 0xff;
+
+                tf->hob_lbah = (block >> 40) & 0xff;
+                tf->hob_lbam = (block >> 32) & 0xff;
+                tf->hob_lbal = (block >> 24) & 0xff;
+                tf->lbah = (block >> 16) & 0xff;
+                tf->lbam = (block >> 8) & 0xff;
+                tf->lbal = block & 0xff;
+
+                tf->device = 1 << 6;
+                if (tf->flags & ATA_TFLAG_FUA)
+                        tf->device |= 1 << 7;
+        } else if (dev->flags & ATA_DFLAG_LBA) {
+                tf->flags |= ATA_TFLAG_LBA;
+
+                if (lba_28_ok(block, n_block)) {
+                        /* use LBA28 */
+                        tf->device |= (block >> 24) & 0xf;
+                } else if (lba_48_ok(block, n_block)) {
+                        if (!(dev->flags & ATA_DFLAG_LBA48))
+                                return -ERANGE;
+
+                        /* use LBA48 */
+                        tf->flags |= ATA_TFLAG_LBA48;
+
+                        tf->hob_nsect = (n_block >> 8) & 0xff;
+
+                        tf->hob_lbah = (block >> 40) & 0xff;
+                        tf->hob_lbam = (block >> 32) & 0xff;
+                        tf->hob_lbal = (block >> 24) & 0xff;
+                } else
+                        /* request too large even for LBA48 */
+                        return -ERANGE;
+
+                if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
+                        return -EINVAL;
+
+                tf->nsect = n_block & 0xff;
+
+                tf->lbah = (block >> 16) & 0xff;
+                tf->lbam = (block >> 8) & 0xff;
+                tf->lbal = block & 0xff;
+
+                tf->device |= ATA_LBA;
+        } else {
+                /* CHS */
+                u32 sect, head, cyl, track;
+
+                /* The request -may- be too large for CHS addressing. */
+                if (!lba_28_ok(block, n_block))
+                        return -ERANGE;
+
+                if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
+                        return -EINVAL;
+
+                /* Convert LBA to CHS */
+                track = (u32)block / dev->sectors;
+                cyl   = track / dev->heads;
+                head  = track % dev->heads;
+                sect  = (u32)block % dev->sectors + 1;
+
+                DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+                        (u32)block, track, cyl, head, sect);
+
+                /* Check whether the converted CHS can fit.
+                   Cylinder: 0-65535
+                   Head: 0-15
+                   Sector: 1-255*/
+                if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+                        return -ERANGE;
+
+                tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
+                tf->lbal = sect;
+                tf->lbam = cyl;
+                tf->lbah = cyl >> 8;
+                tf->device |= head;
+        }
+
+        return 0;
+}
+
+/**
  *      ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
  *      @pio_mask: pio_mask
  *      @mwdma_mask: mwdma_mask
@@ -997,13 +1164,13 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc)
 }
 
 /**
- *      ata_exec_internal - execute libata internal command
+ *      ata_exec_internal_sg - execute libata internal command
  *      @dev: Device to which the command is sent
  *      @tf: Taskfile registers for the command and the result
  *      @cdb: CDB for packet command
  *      @dma_dir: Data tranfer direction of the command
- *      @buf: Data buffer of the command
- *      @buflen: Length of data buffer
+ *      @sg: sg list for the data buffer of the command
+ *      @n_elem: Number of sg entries
  *
  *      Executes libata internal command with timeout.  @tf contains
  *      command on entry and result on return.  Timeout and error
@@ -1017,9 +1184,10 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc)
  *      RETURNS:
  *      Zero on success, AC_ERR_* mask on failure
  */
-unsigned ata_exec_internal(struct ata_device *dev,
-                           struct ata_taskfile *tf, const u8 *cdb,
-                           int dma_dir, void *buf, unsigned int buflen)
+unsigned ata_exec_internal_sg(struct ata_device *dev,
+                              struct ata_taskfile *tf, const u8 *cdb,
+                              int dma_dir, struct scatterlist *sg,
+                              unsigned int n_elem)
 {
         struct ata_port *ap = dev->ap;
         u8 command = tf->command;
@@ -1075,7 +1243,12 @@ unsigned ata_exec_internal(struct ata_device *dev,
         qc->flags |= ATA_QCFLAG_RESULT_TF;
         qc->dma_dir = dma_dir;
         if (dma_dir != DMA_NONE) {
-                ata_sg_init_one(qc, buf, buflen);
+                unsigned int i, buflen = 0;
+
+                for (i = 0; i < n_elem; i++)
+                        buflen += sg[i].length;
+
+                ata_sg_init(qc, sg, n_elem);
                 qc->nsect = buflen / ATA_SECT_SIZE;
         }
 
@@ -1159,6 +1332,35 @@ unsigned ata_exec_internal(struct ata_device *dev,
 }
 
 /**
+ *      ata_exec_internal_sg - execute libata internal command
+ *      @dev: Device to which the command is sent
+ *      @tf: Taskfile registers for the command and the result
+ *      @cdb: CDB for packet command
+ *      @dma_dir: Data tranfer direction of the command
+ *      @buf: Data buffer of the command
+ *      @buflen: Length of data buffer
+ *
+ *      Wrapper around ata_exec_internal_sg() which takes simple
+ *      buffer instead of sg list.
+ *
+ *      LOCKING:
+ *      None.  Should be called with kernel context, might sleep.
+ *
+ *      RETURNS:
+ *      Zero on success, AC_ERR_* mask on failure
+ */
+unsigned ata_exec_internal(struct ata_device *dev,
+                           struct ata_taskfile *tf, const u8 *cdb,
+                           int dma_dir, void *buf, unsigned int buflen)
+{
+        struct scatterlist sg;
+
+        sg_init_one(&sg, buf, buflen);
+
+        return ata_exec_internal_sg(dev, tf, cdb, dma_dir, &sg, 1);
+}
+
+/**
  *      ata_do_simple_cmd - execute simple internal command
  *      @dev: Device to which the command is sent
  *      @cmd: Opcode to execute
@@ -1222,7 +1424,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
  *      ata_dev_read_id - Read ID data from the specified device
  *      @dev: target device
  *      @p_class: pointer to class of the target device (may be changed)
- *      @post_reset: is this read ID post-reset?
+ *      @flags: ATA_READID_* flags
  *      @id: buffer to read IDENTIFY data into
  *
  *      Read ID data from the specified device.  ATA_CMD_ID_ATA is
@@ -1237,7 +1439,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
  *      0 on success, -errno otherwise.
  */
 int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
-                    int post_reset, u16 *id)
+                    unsigned int flags, u16 *id)
 {
         struct ata_port *ap = dev->ap;
         unsigned int class = *p_class;
@@ -1269,10 +1471,17 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
         }
 
         tf.protocol = ATA_PROT_PIO;
+        tf.flags |= ATA_TFLAG_POLLING; /* for polling presence detection */
 
         err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
                                      id, sizeof(id[0]) * ATA_ID_WORDS);
         if (err_mask) {
+                if (err_mask & AC_ERR_NODEV_HINT) {
+                        DPRINTK("ata%u.%d: NODEV after polling detection\n",
+                                ap->id, dev->devno);
+                        return -ENOENT;
+                }
+
                 rc = -EIO;
                 reason = "I/O error";
                 goto err_out;
@@ -1292,7 +1501,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
                         goto err_out;
         }
 
-        if (post_reset && class == ATA_DEV_ATA) {
+        if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
                 /*
                  * The exact sequence expected by certain pre-ATA4 drives is:
                  * SRST RESET
@@ -1312,7 +1521,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
                         /* current CHS translation info (id[53-58]) might be
                          * changed. reread the identify device info.
                          */
-                        post_reset = 0;
+                        flags &= ~ATA_READID_POSTRESET;
                         goto retry;
                 }
         }
@@ -1343,7 +1552,10 @@ static void ata_dev_config_ncq(struct ata_device *dev,
                 desc[0] = '\0';
                 return;
         }
-
+        if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) {
+                snprintf(desc, desc_sz, "NCQ (not used)");
+                return;
+        }
         if (ap->flags & ATA_FLAG_NCQ) {
                 hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
                 dev->flags |= ATA_DFLAG_NCQ;
@@ -1372,7 +1584,6 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap)
 /**
  *      ata_dev_configure - Configure the specified ATA/ATAPI device
  *      @dev: Target device to configure
- *      @print_info: Enable device info printout
  *
  *      Configure @dev according to @dev->id.  Generic and low-level
  *      driver specific fixups are also applied.
@@ -1383,9 +1594,10 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap)
  *      RETURNS:
  *      0 on success, -errno otherwise
  */
-int ata_dev_configure(struct ata_device *dev, int print_info)
+int ata_dev_configure(struct ata_device *dev)
 {
         struct ata_port *ap = dev->ap;
+        int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
         const u16 *id = dev->id;
         unsigned int xfer_mask;
         char revbuf[7];         /* XYZ-99\0 */
@@ -1452,6 +1664,10 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
                         if (ata_id_has_lba48(id)) {
                                 dev->flags |= ATA_DFLAG_LBA48;
                                 lba_desc = "LBA48";
+
+                                if (dev->n_sectors >= (1UL << 28) &&
+                                    ata_id_has_flush_ext(id))
+                                        dev->flags |= ATA_DFLAG_FLUSH_EXT;
                         }
 
                         /* config NCQ */
@@ -1528,6 +1744,11 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
                                        cdb_intr_string);
         }
 
+        /* determine max_sectors */
+        dev->max_sectors = ATA_MAX_SECTORS;
+        if (dev->flags & ATA_DFLAG_LBA48)
+                dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+
         if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
                 /* Let the user know. We don't want to disallow opens for
                    rescue purposes, or in case the vendor is just a blithering
@@ -1629,11 +1850,14 @@ int ata_bus_probe(struct ata_port *ap)
                 if (!ata_dev_enabled(dev))
                         continue;
 
-                rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
+                rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
+                                     dev->id);
                 if (rc)
                         goto fail;
 
-                rc = ata_dev_configure(dev, 1);
+                ap->eh_context.i.flags |= ATA_EHI_PRINTINFO;
+                rc = ata_dev_configure(dev);
+                ap->eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
                 if (rc)
                         goto fail;
         }
@@ -2151,6 +2375,7 @@ int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
 
 static int ata_dev_set_mode(struct ata_device *dev)
 {
+        struct ata_eh_context *ehc = &dev->ap->eh_context;
         unsigned int err_mask;
         int rc;
 
@@ -2165,7 +2390,9 @@ static int ata_dev_set_mode(struct ata_device *dev)
                 return -EIO;
         }
 
+        ehc->i.flags |= ATA_EHI_POST_SETMODE;
         rc = ata_dev_revalidate(dev, 0);
+        ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
         if (rc)
                 return rc;
 
@@ -2323,11 +2550,14 @@ static inline void ata_tf_to_host(struct ata_port *ap,
  *      Sleep until ATA Status register bit BSY clears,
  *      or a timeout occurs.
  *
- *      LOCKING: None.
+ *      LOCKING:
+ *      Kernel thread context (may sleep).
+ *
+ *      RETURNS:
+ *      0 on success, -errno otherwise.
  */
-
-unsigned int ata_busy_sleep (struct ata_port *ap,
-                             unsigned long tmout_pat, unsigned long tmout)
+int ata_busy_sleep(struct ata_port *ap,
+                   unsigned long tmout_pat, unsigned long tmout)
 {
         unsigned long timer_start, timeout;
         u8 status;
@@ -2335,27 +2565,32 @@ unsigned int ata_busy_sleep (struct ata_port *ap,
         status = ata_busy_wait(ap, ATA_BUSY, 300);
         timer_start = jiffies;
         timeout = timer_start + tmout_pat;
-        while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
+        while (status != 0xff && (status & ATA_BUSY) &&
+               time_before(jiffies, timeout)) {
                 msleep(50);
                 status = ata_busy_wait(ap, ATA_BUSY, 3);
         }
 
-        if (status & ATA_BUSY)
+        if (status != 0xff && (status & ATA_BUSY))
                 ata_port_printk(ap, KERN_WARNING,
                                 "port is slow to respond, please be patient "
                                 "(Status 0x%x)\n", status);
 
         timeout = timer_start + tmout;
-        while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
+        while (status != 0xff && (status & ATA_BUSY) &&
+               time_before(jiffies, timeout)) {
                 msleep(50);
                 status = ata_chk_status(ap);
         }
 
+        if (status == 0xff)
+                return -ENODEV;
+
         if (status & ATA_BUSY) {
                 ata_port_printk(ap, KERN_ERR, "port failed to respond "
                                 "(%lu secs, Status 0x%x)\n",
                                 tmout / HZ, status);
-                return 1;
+                return -EBUSY;
         }
 
         return 0;
@@ -2446,10 +2681,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
          * the bus shows 0xFF because the odd clown forgets the D7
          * pulldown resistor.
          */
-        if (ata_check_status(ap) == 0xFF) {
-                ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n");
-                return AC_ERR_OTHER;
-        }
+        if (ata_check_status(ap) == 0xFF)
+                return 0;
 
         ata_bus_post_reset(ap, devmask);
 
@@ -2775,9 +3008,9 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
 }
 
 /**
- *      sata_std_hardreset - reset host port via SATA phy reset
+ *      sata_port_hardreset - reset port via SATA phy reset
  *      @ap: port to reset
- *      @class: resulting class of attached device
+ *      @timing: timing parameters { interval, duratinon, timeout } in msec
  *
  *      SATA phy-reset host port using DET bits of SControl register.
  *
@@ -2787,10 +3020,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
  *      RETURNS:
  *      0 on success, -errno otherwise.
  */
-int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
+int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing)
 {
-        struct ata_eh_context *ehc = &ap->eh_context;
-        const unsigned long *timing = sata_ehc_deb_timing(ehc);
         u32 scontrol;
         int rc;
 
@@ -2803,24 +3034,24 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
                  * and Sil3124.
                  */
                 if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
-                        return rc;
+                        goto out;
 
                 scontrol = (scontrol & 0x0f0) | 0x304;
 
                 if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
-                        return rc;
+                        goto out;
 
                 sata_set_spd(ap);
         }
 
         /* issue phy wake/reset */
         if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
-                return rc;
+                goto out;
 
         scontrol = (scontrol & 0x0f0) | 0x301;
 
         if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol)))
-                return rc;
+                goto out;
 
         /* Couldn't find anything in SATA I/II specs, but AHCI-1.1
          * 10.4.2 says at least 1 ms.
@@ -2828,7 +3059,40 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
         msleep(1);
 
         /* bring phy back */
-        sata_phy_resume(ap, timing);
+        rc = sata_phy_resume(ap, timing);
+ out:
+        DPRINTK("EXIT, rc=%d\n", rc);
+        return rc;
+}
+
+/**
+ *      sata_std_hardreset - reset host port via SATA phy reset
+ *      @ap: port to reset
+ *      @class: resulting class of attached device
+ *
+ *      SATA phy-reset host port using DET bits of SControl register,
+ *      wait for !BSY and classify the attached device.
+ *
+ *      LOCKING:
+ *      Kernel thread context (may sleep)
+ *
+ *      RETURNS:
+ *      0 on success, -errno otherwise.
+ */
+int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
+{
+        const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context);
+        int rc;
+
+        DPRINTK("ENTER\n");
+
+        /* do hardreset */
+        rc = sata_port_hardreset(ap, timing);
+        if (rc) {
+                ata_port_printk(ap, KERN_ERR,
+                                "COMRESET failed (errno=%d)\n", rc);
+                return rc;
+        }
 
         /* TODO: phy layer with polling, timeouts, etc. */
         if (ata_port_offline(ap)) {
@@ -2967,7 +3231,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 /**
  *      ata_dev_revalidate - Revalidate ATA device
  *      @dev: device to revalidate
- *      @post_reset: is this revalidation after reset?
+ *      @readid_flags: read ID flags
  *
  *      Re-read IDENTIFY page and make sure @dev is still attached to
  *      the port.
@@ -2978,7 +3242,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
  *      RETURNS:
  *      0 on success, negative errno otherwise
  */
-int ata_dev_revalidate(struct ata_device *dev, int post_reset)
+int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
 {
         unsigned int class = dev->class;
         u16 *id = (void *)dev->ap->sector_buf;
@@ -2990,7 +3254,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
         }
 
         /* read ID data */
-        rc = ata_dev_read_id(dev, &class, post_reset, id);
+        rc = ata_dev_read_id(dev, &class, readid_flags, id);
         if (rc)
                 goto fail;
 
@@ -3003,7 +3267,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
         memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
 
         /* configure device according to the new ID */
-        rc = ata_dev_configure(dev, 0);
+        rc = ata_dev_configure(dev);
         if (rc == 0)
                 return 0;
 
@@ -3012,37 +3276,55 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
         return rc;
 }
 
-static const char * const ata_dma_blacklist [] = {
-        "WDC AC11000H", NULL,
-        "WDC AC22100H", NULL,
-        "WDC AC32500H", NULL,
-        "WDC AC33100H", NULL,
-        "WDC AC31600H", NULL,
-        "WDC AC32100H", "24.09P07",
-        "WDC AC23200L", "21.10N21",
-        "Compaq CRD-8241B",  NULL,
-        "CRD-8400B", NULL,
-        "CRD-8480B", NULL,
-        "CRD-8482B", NULL,
-        "CRD-84", NULL,
-        "SanDisk SDP3B", NULL,
-        "SanDisk SDP3B-64", NULL,
-        "SANYO CD-ROM CRD", NULL,
-        "HITACHI CDR-8", NULL,
-        "HITACHI CDR-8335", NULL,
-        "HITACHI CDR-8435", NULL,
-        "Toshiba CD-ROM XM-6202B", NULL,
-        "TOSHIBA CD-ROM XM-1702BC", NULL,
-        "CD-532E-A", NULL,
-        "E-IDE CD-ROM CR-840", NULL,
-        "CD-ROM Drive/F5A", NULL,
-        "WPI CDD-820", NULL,
-        "SAMSUNG CD-ROM SC-148C", NULL,
-        "SAMSUNG CD-ROM SC", NULL,
-        "SanDisk SDP3B-64", NULL,
-        "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,
-        "_NEC DV5800A", NULL,
-        "SAMSUNG CD-ROM SN-124", "N001"
+struct ata_blacklist_entry {
+        const char *model_num;
+        const char *model_rev;
+        unsigned long horkage;
+};
+
+static const struct ata_blacklist_entry ata_device_blacklist [] = {
+        /* Devices with DMA related problems under Linux */
+        { "WDC AC11000H",       NULL,           ATA_HORKAGE_NODMA },
+        { "WDC AC22100H",       NULL,           ATA_HORKAGE_NODMA },
+        { "WDC AC32500H",       NULL,           ATA_HORKAGE_NODMA },
+        { "WDC AC33100H",       NULL,           ATA_HORKAGE_NODMA },
+        { "WDC AC31600H",       NULL,           ATA_HORKAGE_NODMA },
+        { "WDC AC32100H",       "24.09P07",     ATA_HORKAGE_NODMA },
+        { "WDC AC23200L",       "21.10N21",     ATA_HORKAGE_NODMA },
+        { "Compaq CRD-8241B",   NULL,           ATA_HORKAGE_NODMA },
+        { "CRD-8400B",          NULL,           ATA_HORKAGE_NODMA },
+        { "CRD-8480B",          NULL,           ATA_HORKAGE_NODMA },
+        { "CRD-8482B",          NULL,           ATA_HORKAGE_NODMA },
+        { "CRD-84",             NULL,           ATA_HORKAGE_NODMA },
+        { "SanDisk SDP3B",      NULL,           ATA_HORKAGE_NODMA },
+        { "SanDisk SDP3B-64",   NULL,           ATA_HORKAGE_NODMA },
+        { "SANYO CD-ROM CRD",   NULL,           ATA_HORKAGE_NODMA },
+        { "HITACHI CDR-8",      NULL,           ATA_HORKAGE_NODMA },
+        { "HITACHI CDR-8335",   NULL,           ATA_HORKAGE_NODMA },
+        { "HITACHI CDR-8435",   NULL,           ATA_HORKAGE_NODMA },
+        { "Toshiba CD-ROM XM-6202B", NULL,      ATA_HORKAGE_NODMA },
+        { "TOSHIBA CD-ROM XM-1702BC", NULL,     ATA_HORKAGE_NODMA },
+        { "CD-532E-A",          NULL,           ATA_HORKAGE_NODMA },
+        { "E-IDE CD-ROM CR-840",NULL,           ATA_HORKAGE_NODMA },
+        { "CD-ROM Drive/F5A",   NULL,           ATA_HORKAGE_NODMA },
+        { "WPI CDD-820",        NULL,           ATA_HORKAGE_NODMA },
+        { "SAMSUNG CD-ROM SC-148C", NULL,       ATA_HORKAGE_NODMA },
+        { "SAMSUNG CD-ROM SC",  NULL,           ATA_HORKAGE_NODMA },
+        { "SanDisk SDP3B-64",   NULL,           ATA_HORKAGE_NODMA },
+        { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
+        { "_NEC DV5800A",       NULL,           ATA_HORKAGE_NODMA },
+        { "SAMSUNG CD-ROM SN-124","N001",       ATA_HORKAGE_NODMA },
+
+        /* Devices we expect to fail diagnostics */
+
+        /* Devices where NCQ should be avoided */
+        /* NCQ is slow */
+        { "WDC WD740ADFD-00",   NULL,           ATA_HORKAGE_NONCQ },
+
+        /* Devices with NCQ limits */
+
+        /* End Marker */
+        { }
 };
 
 static int ata_strim(char *s, size_t len)
@@ -3057,20 +3339,12 @@ static int ata_strim(char *s, size_t len)
         return len;
 }
 
-static int ata_dma_blacklisted(const struct ata_device *dev)
+unsigned long ata_device_blacklisted(const struct ata_device *dev)
 {
         unsigned char model_num[40];
         unsigned char model_rev[16];
         unsigned int nlen, rlen;
-        int i;
-
-        /* We don't support polling DMA.
-         * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
-         * if the LLDD handles only interrupts in the HSM_ST_LAST state.
-         */
-        if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
-            (dev->flags & ATA_DFLAG_CDB_INTR))
-                return 1;
+        const struct ata_blacklist_entry *ad = ata_device_blacklist;
 
         ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
                           sizeof(model_num));
@@ -3079,17 +3353,30 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
         nlen = ata_strim(model_num, sizeof(model_num));
         rlen = ata_strim(model_rev, sizeof(model_rev));
 
-        for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) {
-                if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) {
-                        if (ata_dma_blacklist[i+1] == NULL)
-                                return 1;
-                        if (!strncmp(ata_dma_blacklist[i], model_rev, rlen))
-                                return 1;
+        while (ad->model_num) {
+                if (!strncmp(ad->model_num, model_num, nlen)) {
+                        if (ad->model_rev == NULL)
+                                return ad->horkage;
+                        if (!strncmp(ad->model_rev, model_rev, rlen))
+                                return ad->horkage;
                 }
+                ad++;
         }
         return 0;
 }
 
+static int ata_dma_blacklisted(const struct ata_device *dev)
+{
+        /* We don't support polling DMA.
+         * DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
+         * if the LLDD handles only interrupts in the HSM_ST_LAST state.
+         */
+        if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
+            (dev->flags & ATA_DFLAG_CDB_INTR))
+                return 1;
+        return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0;
+}
+
 /**
  *      ata_dev_xfermask - Compute supported xfermask of the given device
  *      @dev: Device to compute xfermask for
@@ -3117,6 +3404,13 @@ static void ata_dev_xfermask(struct ata_device *dev)
          */
         if (ap->cbl == ATA_CBL_PATA40)
                 xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+        /* Apply drive side cable rule. Unknown or 80 pin cables reported
+         * host side are checked drive side as well. Cases where we know a
+         * 40wire cable is used safely for 80 are not checked here.
+         */
+        if (ata_drive_40wire(dev->id) && (ap->cbl == ATA_CBL_PATA_UNK || ap->cbl == ATA_CBL_PATA80))
+                xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+
 
         xfer_mask &= ata_pack_xfermask(dev->pio_mask,
                                        dev->mwdma_mask, dev->udma_mask);
@@ -3234,8 +3528,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
  *      LOCKING:
  *      spin_lock_irqsave(host lock)
  */
-
-static void ata_sg_clean(struct ata_queued_cmd *qc)
+void ata_sg_clean(struct ata_queued_cmd *qc)
 {
         struct ata_port *ap = qc->ap;
         struct scatterlist *sg = qc->__sg;
@@ -3393,19 +3686,15 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
 
 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 {
-        struct scatterlist *sg;
-
         qc->flags |= ATA_QCFLAG_SINGLE;
 
-        memset(&qc->sgent, 0, sizeof(qc->sgent));
         qc->__sg = &qc->sgent;
         qc->n_elem = 1;
         qc->orig_n_elem = 1;
         qc->buf_virt = buf;
         qc->nbytes = buflen;
 
-        sg = qc->__sg;
-        sg_init_one(sg, buf, buflen);
+        sg_init_one(&qc->sgent, buf, buflen);
 }
 
 /**
@@ -4198,8 +4487,12 @@ fsm_start:
                                         /* device stops HSM for abort/error */
                                         qc->err_mask |= AC_ERR_DEV;
                                 else
-                                        /* HSM violation. Let EH handle this */
-                                        qc->err_mask |= AC_ERR_HSM;
+                                        /* HSM violation. Let EH handle this.
+                                         * Phantom devices also trigger this
+                                         * condition.  Mark hint.
+                                         */
+                                        qc->err_mask |= AC_ERR_HSM |
+                                                        AC_ERR_NODEV_HINT;
 
                                 ap->hsm_task_state = HSM_ST_ERR;
                                 goto fsm_start;
@@ -4439,6 +4732,14 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
         qc->complete_fn(qc);
 }
 
+static void fill_result_tf(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+
+        ap->ops->tf_read(ap, &qc->result_tf);
+        qc->result_tf.flags = qc->tf.flags;
+}
+
 /**
  *      ata_qc_complete - Complete an active ATA command
  *      @qc: Command to complete
@@ -4476,7 +4777,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
                 if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
                         if (!ata_tag_internal(qc->tag)) {
                                 /* always fill result TF for failed qc */
-                                ap->ops->tf_read(ap, &qc->result_tf);
+                                fill_result_tf(qc);
                                 ata_qc_schedule_eh(qc);
                                 return;
                         }
@@ -4484,7 +4785,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 
                 /* read result TF if requested */
                 if (qc->flags & ATA_QCFLAG_RESULT_TF)
-                        ap->ops->tf_read(ap, &qc->result_tf);
+                        fill_result_tf(qc);
 
                 __ata_qc_complete(qc);
         } else {
@@ -4493,7 +4794,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 
                 /* read result TF if failed or requested */
                 if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
-                        ap->ops->tf_read(ap, &qc->result_tf);
+                        fill_result_tf(qc);
 
                 __ata_qc_complete(qc);
         }
@@ -4673,6 +4974,14 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
                 }
         }
 
+        /* Some controllers show flaky interrupt behavior after
+         * setting xfer mode.  Use polling instead.
+         */
+        if (unlikely(qc->tf.command == ATA_CMD_SET_FEATURES &&
+                     qc->tf.feature == SETFEATURES_XFER) &&
+            (ap->flags & ATA_FLAG_SETXFER_POLLING))
+                qc->tf.flags |= ATA_TFLAG_POLLING;
+
         /* select the device */
         ata_dev_select(ap, qc->dev->devno, 1, 0);
 
@@ -4781,6 +5090,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
 inline unsigned int ata_host_intr (struct ata_port *ap,
                                    struct ata_queued_cmd *qc)
 {
+        struct ata_eh_info *ehi = &ap->eh_info;
         u8 status, host_stat = 0;
 
         VPRINTK("ata%u: protocol %d task_state %d\n",
@@ -4841,6 +5151,11 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
         ap->ops->irq_clear(ap);
 
         ata_hsm_move(ap, qc, status, 0);
+
+        if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+                                       qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+                ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
         return 1;       /* irq handled */
 
 idle_irq:
@@ -5047,7 +5362,7 @@ int ata_flush_cache(struct ata_device *dev)
         if (!ata_try_flush_cache(dev))
                 return 0;
 
-        if (ata_id_has_flush_ext(dev->id))
+        if (dev->flags & ATA_DFLAG_FLUSH_EXT)
                 cmd = ATA_CMD_FLUSH_EXT;
         else
                 cmd = ATA_CMD_FLUSH;
@@ -5519,9 +5834,8 @@ int ata_device_add(const struct ata_probe_ent *ent)
                                 ap->ioaddr.bmdma_addr,
                                 irq_line);
 
-                ata_chk_status(ap);
-                host->ops->irq_clear(ap);
-                ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */
+                /* freeze port before requesting IRQ */
+                ata_eh_freeze_port(ap);
         }
 
         /* obtain irq, that may be shared between channels */
@@ -6119,6 +6433,7 @@ EXPORT_SYMBOL_GPL(__sata_phy_reset);
 EXPORT_SYMBOL_GPL(ata_bus_reset);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(ata_std_softreset);
+EXPORT_SYMBOL_GPL(sata_port_hardreset);
 EXPORT_SYMBOL_GPL(sata_std_hardreset);
 EXPORT_SYMBOL_GPL(ata_std_postreset);
 EXPORT_SYMBOL_GPL(ata_dev_classify);
@@ -6145,6 +6460,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend);
 EXPORT_SYMBOL_GPL(ata_host_resume);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_device_blacklisted);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 9f6b7cc74fd9..08ad44b3e48f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1136,19 +1136,21 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
                 break;
 
         case ATA_DEV_ATAPI:
-                tmp = atapi_eh_request_sense(qc->dev,
-                                             qc->scsicmd->sense_buffer);
-                if (!tmp) {
-                        /* ATA_QCFLAG_SENSE_VALID is used to tell
-                         * atapi_qc_complete() that sense data is
-                         * already valid.
-                         *
-                         * TODO: interpret sense data and set
-                         * appropriate err_mask.
-                         */
-                        qc->flags |= ATA_QCFLAG_SENSE_VALID;
-                } else
-                        qc->err_mask |= tmp;
+                if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
+                        tmp = atapi_eh_request_sense(qc->dev,
+                                                     qc->scsicmd->sense_buffer);
+                        if (!tmp) {
+                                /* ATA_QCFLAG_SENSE_VALID is used to
+                                 * tell atapi_qc_complete() that sense
+                                 * data is already valid.
+                                 *
+                                 * TODO: interpret sense data and set
+                                 * appropriate err_mask.
+                                 */
+                                qc->flags |= ATA_QCFLAG_SENSE_VALID;
+                        } else
+                                qc->err_mask |= tmp;
+                }
         }
 
         if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
@@ -1433,16 +1435,39 @@ static void ata_eh_report(struct ata_port *ap)
         }
 
         for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+                static const char *dma_str[] = {
+                        [DMA_BIDIRECTIONAL]     = "bidi",
+                        [DMA_TO_DEVICE]         = "out",
+                        [DMA_FROM_DEVICE]       = "in",
+                        [DMA_NONE]              = "",
+                };
                 struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+                struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
+                unsigned int nbytes;
 
                 if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask)
                         continue;
 
-                ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x "
-                               "Emask 0x%x stat 0x%x err 0x%x (%s)\n",
-                               qc->tag, qc->tf.command, qc->err_mask,
-                               qc->result_tf.command, qc->result_tf.feature,
-                               ata_err_string(qc->err_mask));
+                nbytes = qc->nbytes;
+                if (!nbytes)
+                        nbytes = qc->nsect << 9;
+
+                ata_dev_printk(qc->dev, KERN_ERR,
+                        "cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
+                        "tag %d cdb 0x%x data %u %s\n         "
+                        "res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
+                        "Emask 0x%x (%s)\n",
+                        cmd->command, cmd->feature, cmd->nsect,
+                        cmd->lbal, cmd->lbam, cmd->lbah,
+                        cmd->hob_feature, cmd->hob_nsect,
+                        cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah,
+                        cmd->device, qc->tag, qc->cdb[0], nbytes,
+                        dma_str[qc->dma_dir],
+                        res->command, res->feature, res->nsect,
+                        res->lbal, res->lbam, res->lbah,
+                        res->hob_feature, res->hob_nsect,
+                        res->hob_lbal, res->hob_lbam, res->hob_lbah,
+                        res->device, qc->err_mask, ata_err_string(qc->err_mask));
         }
 }
 
@@ -1634,11 +1659,14 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
         DPRINTK("ENTER\n");
 
         for (i = 0; i < ATA_MAX_DEVICES; i++) {
-                unsigned int action;
+                unsigned int action, readid_flags = 0;
 
                 dev = &ap->device[i];
                 action = ata_eh_dev_action(dev);
 
+                if (ehc->i.flags & ATA_EHI_DID_RESET)
+                        readid_flags |= ATA_READID_POSTRESET;
+
                 if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
                         if (ata_port_offline(ap)) {
                                 rc = -EIO;
@@ -1646,13 +1674,17 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
                         }
 
                         ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE);
-                        rc = ata_dev_revalidate(dev,
-                                        ehc->i.flags & ATA_EHI_DID_RESET);
+                        rc = ata_dev_revalidate(dev, readid_flags);
                         if (rc)
                                 break;
 
                         ata_eh_done(ap, dev, ATA_EH_REVALIDATE);
 
+                        /* Configuration may have changed, reconfigure
+                         * transfer mode.
+                         */
+                        ehc->i.flags |= ATA_EHI_SETMODE;
+
                         /* schedule the scsi_rescan_device() here */
                         queue_work(ata_aux_wq, &(ap->scsi_rescan_task));
                 } else if (dev->class == ATA_DEV_UNKNOWN &&
@@ -1660,18 +1692,35 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
                            ata_class_enabled(ehc->classes[dev->devno])) {
                         dev->class = ehc->classes[dev->devno];
 
-                        rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
-                        if (rc == 0)
-                                rc = ata_dev_configure(dev, 1);
+                        rc = ata_dev_read_id(dev, &dev->class, readid_flags,
+                                             dev->id);
+                        if (rc == 0) {
+                                ehc->i.flags |= ATA_EHI_PRINTINFO;
+                                rc = ata_dev_configure(dev);
+                                ehc->i.flags &= ~ATA_EHI_PRINTINFO;
+                        } else if (rc == -ENOENT) {
+                                /* IDENTIFY was issued to non-existent
+                                 * device.  No need to reset.  Just
+                                 * thaw and kill the device.
+                                 */
+                                ata_eh_thaw_port(ap);
+                                dev->class = ATA_DEV_UNKNOWN;
+                                rc = 0;
+                        }
 
                         if (rc) {
                                 dev->class = ATA_DEV_UNKNOWN;
                                 break;
                         }
 
-                        spin_lock_irqsave(ap->lock, flags);
-                        ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
-                        spin_unlock_irqrestore(ap->lock, flags);
+                        if (ata_dev_enabled(dev)) {
+                                spin_lock_irqsave(ap->lock, flags);
+                                ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
+                                spin_unlock_irqrestore(ap->lock, flags);
+
+                                /* new device discovered, configure xfermode */
+                                ehc->i.flags |= ATA_EHI_SETMODE;
+                        }
                 }
         }
 
@@ -1987,13 +2036,14 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
         if (rc)
                 goto dev_fail;
 
-        /* configure transfer mode if the port has been reset */
-        if (ehc->i.flags & ATA_EHI_DID_RESET) {
+        /* configure transfer mode if necessary */
+        if (ehc->i.flags & ATA_EHI_SETMODE) {
                 rc = ata_set_mode(ap, &dev);
                 if (rc) {
                         down_xfermask = 1;
                         goto dev_fail;
                 }
+                ehc->i.flags &= ~ATA_EHI_SETMODE;
         }
 
         /* suspend devices */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 4c32d93d44b1..664e1377b54c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -671,7 +671,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
 }
 
 /*
- *      ata_gen_ata_desc_sense - Generate check condition sense block.
+ *      ata_gen_passthru_sense - Generate check condition sense block.
  *      @qc: Command that completed.
  *
  *      This function is specific to the ATA descriptor format sense
@@ -681,9 +681,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
  *      block. Clear sense key, ASC & ASCQ if there is no error.
  *
  *      LOCKING:
- *      spin_lock_irqsave(host lock)
+ *      None.
  */
-void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
+static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
 {
         struct scsi_cmnd *cmd = qc->scsicmd;
         struct ata_taskfile *tf = &qc->result_tf;
@@ -713,12 +713,9 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
 
         desc[0] = 0x09;
 
-        /*
-         * Set length of additional sense data.
-         * Since we only populate descriptor 0, the total
-         * length is the same (fixed) length as descriptor 0.
-         */
-        desc[1] = sb[7] = 14;
+        /* set length of additional sense data */
+        sb[7] = 14;
+        desc[1] = 12;
 
         /*
          * Copy registers into sense buffer.
@@ -746,56 +743,56 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
 }
 
 /**
- *      ata_gen_fixed_sense - generate a SCSI fixed sense block
+ *      ata_gen_ata_sense - generate a SCSI fixed sense block
  *      @qc: Command that we are erroring out
  *
- *      Leverage ata_to_sense_error() to give us the codes.  Fit our
- *      LBA in here if there's room.
+ *      Generate sense block for a failed ATA command @qc.  Descriptor
+ *      format is used to accomodate LBA48 block address.
  *
  *      LOCKING:
- *      inherited from caller
+ *      None.
  */
-void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
+static void ata_gen_ata_sense(struct ata_queued_cmd *qc)
 {
+        struct ata_device *dev = qc->dev;
         struct scsi_cmnd *cmd = qc->scsicmd;
         struct ata_taskfile *tf = &qc->result_tf;
         unsigned char *sb = cmd->sense_buffer;
+        unsigned char *desc = sb + 8;
         int verbose = qc->ap->ops->error_handler == NULL;
+        u64 block;
 
         memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
 
         cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
 
-        /*
-         * Use ata_to_sense_error() to map status register bits
+        /* sense data is current and format is descriptor */
+        sb[0] = 0x72;
+
+        /* Use ata_to_sense_error() to map status register bits
          * onto sense key, asc & ascq.
          */
         if (qc->err_mask ||
             tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
                 ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
-                                   &sb[2], &sb[12], &sb[13], verbose);
-                sb[2] &= 0x0f;
+                                   &sb[1], &sb[2], &sb[3], verbose);
+                sb[1] &= 0x0f;
         }
 
-        sb[0] = 0x70;
-        sb[7] = 0x0a;
-
-        if (tf->flags & ATA_TFLAG_LBA48) {
-                /* TODO: find solution for LBA48 descriptors */
-        }
+        block = ata_tf_read_block(&qc->result_tf, dev);
 
-        else if (tf->flags & ATA_TFLAG_LBA) {
-                /* A small (28b) LBA will fit in the 32b info field */
-                sb[0] |= 0x80;          /* set valid bit */
-                sb[3] = tf->device & 0x0f;
-                sb[4] = tf->lbah;
-                sb[5] = tf->lbam;
-                sb[6] = tf->lbal;
-        }
+        /* information sense data descriptor */
+        sb[7] = 12;
+        desc[0] = 0x00;
+        desc[1] = 10;
 
-        else {
-                /* TODO: C/H/S */
-        }
+        desc[2] |= 0x80;        /* valid */
+        desc[6] = block >> 40;
+        desc[7] = block >> 32;
+        desc[8] = block >> 24;
+        desc[9] = block >> 16;
+        desc[10] = block >> 8;
+        desc[11] = block;
 }
 
 static void ata_scsi_sdev_config(struct scsi_device *sdev)
@@ -807,23 +804,10 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev)
 static void ata_scsi_dev_config(struct scsi_device *sdev,
                                 struct ata_device *dev)
 {
-        unsigned int max_sectors;
-
-        /* TODO: 2048 is an arbitrary number, not the
-         * hardware maximum.  This should be increased to
-         * 65534 when Jens Axboe's patch for dynamically
-         * determining max_sectors is merged.
-         */
-        max_sectors = ATA_MAX_SECTORS;
-        if (dev->flags & ATA_DFLAG_LBA48)
-                max_sectors = ATA_MAX_SECTORS_LBA48;
-        if (dev->max_sectors)
-                max_sectors = dev->max_sectors;
+        /* configure max sectors */
+        blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
 
-        blk_queue_max_sectors(sdev->request_queue, max_sectors);
-
-        /*
-         * SATA DMA transfers must be multiples of 4 byte, so
+        /* SATA DMA transfers must be multiples of 4 byte, so
          * we need to pad ATAPI transfers using an extra sg.
          * Decrement max hw segments accordingly.
          */
@@ -1040,8 +1024,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scs
         tf->flags |= ATA_TFLAG_DEVICE;
         tf->protocol = ATA_PROT_NODATA;
 
-        if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
-            (ata_id_has_flush_ext(qc->dev->id)))
+        if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT)
                 tf->command = ATA_CMD_FLUSH_EXT;
         else
                 tf->command = ATA_CMD_FLUSH;
@@ -1282,17 +1265,14 @@ nothing_to_do:
 
 static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
 {
-        struct ata_taskfile *tf = &qc->tf;
-        struct ata_device *dev = qc->dev;
+        unsigned int tf_flags = 0;
         u64 block;
         u32 n_block;
-
-        qc->flags |= ATA_QCFLAG_IO;
-        tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+        int rc;
 
         if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
             scsicmd[0] == WRITE_16)
-                tf->flags |= ATA_TFLAG_WRITE;
+                tf_flags |= ATA_TFLAG_WRITE;
 
         /* Calculate the SCSI LBA, transfer length and FUA. */
         switch (scsicmd[0]) {
@@ -1300,7 +1280,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm
         case WRITE_10:
                 scsi_10_lba_len(scsicmd, &block, &n_block);
                 if (unlikely(scsicmd[1] & (1 << 3)))
-                        tf->flags |= ATA_TFLAG_FUA;
+                        tf_flags |= ATA_TFLAG_FUA;
                 break;
         case READ_6:
         case WRITE_6:
@@ -1316,7 +1296,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm
         case WRITE_16:
                 scsi_16_lba_len(scsicmd, &block, &n_block);
                 if (unlikely(scsicmd[1] & (1 << 3)))
-                        tf->flags |= ATA_TFLAG_FUA;
+                        tf_flags |= ATA_TFLAG_FUA;
                 break;
         default:
                 DPRINTK("no-byte command\n");
@@ -1334,106 +1314,17 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm
                  */
                 goto nothing_to_do;
 
-        if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
-                           ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) {
-                /* yay, NCQ */
-                if (!lba_48_ok(block, n_block))
-                        goto out_of_range;
-
-                tf->protocol = ATA_PROT_NCQ;
-                tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
-
-                if (tf->flags & ATA_TFLAG_WRITE)
-                        tf->command = ATA_CMD_FPDMA_WRITE;
-                else
-                        tf->command = ATA_CMD_FPDMA_READ;
-
-                qc->nsect = n_block;
-
-                tf->nsect = qc->tag << 3;
-                tf->hob_feature = (n_block >> 8) & 0xff;
-                tf->feature = n_block & 0xff;
-
-                tf->hob_lbah = (block >> 40) & 0xff;
-                tf->hob_lbam = (block >> 32) & 0xff;
-                tf->hob_lbal = (block >> 24) & 0xff;
-                tf->lbah = (block >> 16) & 0xff;
-                tf->lbam = (block >> 8) & 0xff;
-                tf->lbal = block & 0xff;
-
-                tf->device = 1 << 6;
-                if (tf->flags & ATA_TFLAG_FUA)
-                        tf->device |= 1 << 7;
-        } else if (dev->flags & ATA_DFLAG_LBA) {
-                tf->flags |= ATA_TFLAG_LBA;
-
-                if (lba_28_ok(block, n_block)) {
-                        /* use LBA28 */
-                        tf->device |= (block >> 24) & 0xf;
-                } else if (lba_48_ok(block, n_block)) {
-                        if (!(dev->flags & ATA_DFLAG_LBA48))
-                                goto out_of_range;
-
-                        /* use LBA48 */
-                        tf->flags |= ATA_TFLAG_LBA48;
-
-                        tf->hob_nsect = (n_block >> 8) & 0xff;
-
-                        tf->hob_lbah = (block >> 40) & 0xff;
-                        tf->hob_lbam = (block >> 32) & 0xff;
-                        tf->hob_lbal = (block >> 24) & 0xff;
-                } else
-                        /* request too large even for LBA48 */
-                        goto out_of_range;
-
-                if (unlikely(ata_rwcmd_protocol(qc) < 0))
-                        goto invalid_fld;
-
-                qc->nsect = n_block;
-                tf->nsect = n_block & 0xff;
-
-                tf->lbah = (block >> 16) & 0xff;
-                tf->lbam = (block >> 8) & 0xff;
-                tf->lbal = block & 0xff;
-
-                tf->device |= ATA_LBA;
-        } else {
-                /* CHS */
-                u32 sect, head, cyl, track;
-
-                /* The request -may- be too large for CHS addressing. */
-                if (!lba_28_ok(block, n_block))
-                        goto out_of_range;
-
-                if (unlikely(ata_rwcmd_protocol(qc) < 0))
-                        goto invalid_fld;
-
-                /* Convert LBA to CHS */
-                track = (u32)block / dev->sectors;
-                cyl   = track / dev->heads;
-                head  = track % dev->heads;
-                sect  = (u32)block % dev->sectors + 1;
-
-                DPRINTK("block %u track %u cyl %u head %u sect %u\n",
-                        (u32)block, track, cyl, head, sect);
-
-                /* Check whether the converted CHS can fit.
-                   Cylinder: 0-65535
-                   Head: 0-15
-                   Sector: 1-255*/
-                if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
-                        goto out_of_range;
-
-                qc->nsect = n_block;
-                tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
-                tf->lbal = sect;
-                tf->lbam = cyl;
-                tf->lbah = cyl >> 8;
-                tf->device |= head;
-        }
+        qc->flags |= ATA_QCFLAG_IO;
+        qc->nsect = n_block;
 
-        return 0;
+        rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags,
+                             qc->tag);
+        if (likely(rc == 0))
+                return 0;
 
+        if (rc == -ERANGE)
+                goto out_of_range;
+        /* treat all other errors as -EINVAL, fall through */
 invalid_fld:
         ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
         /* "Invalid field in cbd" */
@@ -1477,7 +1368,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
          */
         if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
             ((cdb[2] & 0x20) || need_sense)) {
-                ata_gen_ata_desc_sense(qc);
+                ata_gen_passthru_sense(qc);
         } else {
                 if (!need_sense) {
                         cmd->result = SAM_STAT_GOOD;
@@ -1488,7 +1379,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
                          * good for smaller LBA (and maybe CHS?)
                          * devices.
                          */
-                        ata_gen_fixed_sense(qc);
+                        ata_gen_ata_sense(qc);
                 }
         }
 
@@ -1715,6 +1606,22 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
 }
 
 /**
+ *      ATA_SCSI_RBUF_SET - helper to set values in SCSI response buffer
+ *      @idx: byte index into SCSI response buffer
+ *      @val: value to set
+ *
+ *      To be used by SCSI command simulator functions.  This macros
+ *      expects two local variables, u8 *rbuf and unsigned int buflen,
+ *      are in scope.
+ *
+ *      LOCKING:
+ *      None.
+ */
+#define ATA_SCSI_RBUF_SET(idx, val) do { \
+                if ((idx) < buflen) rbuf[(idx)] = (u8)(val); \
+        } while (0)
+
+/**
  *      ata_scsiop_inq_std - Simulate INQUIRY command
  *      @args: device IDENTIFY data / SCSI command of interest.
  *      @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
@@ -2173,67 +2080,42 @@ saving_not_supp:
  *      Simulate READ CAPACITY commands.
  *
  *      LOCKING:
- *      spin_lock_irqsave(host lock)
+ *      None.
  */
-
 unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
                                 unsigned int buflen)
 {
-        u64 n_sectors;
-        u32 tmp;
+        u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
 
         VPRINTK("ENTER\n");
 
-        if (ata_id_has_lba(args->id)) {
-                if (ata_id_has_lba48(args->id))
-                        n_sectors = ata_id_u64(args->id, 100);
-                else
-                        n_sectors = ata_id_u32(args->id, 60);
-        } else {
-                /* CHS default translation */
-                n_sectors = args->id[1] * args->id[3] * args->id[6];
-
-                if (ata_id_current_chs_valid(args->id))
-                        /* CHS current translation */
-                        n_sectors = ata_id_u32(args->id, 57);
-        }
-
-        n_sectors--;            /* ATA TotalUserSectors - 1 */
-
         if (args->cmd->cmnd[0] == READ_CAPACITY) {
-                if( n_sectors >= 0xffffffffULL )
-                        tmp = 0xffffffff ;  /* Return max count on overflow */
-                else
-                        tmp = n_sectors ;
+                if (last_lba >= 0xffffffffULL)
+                        last_lba = 0xffffffff;
 
                 /* sector count, 32-bit */
-                rbuf[0] = tmp >> (8 * 3);
-                rbuf[1] = tmp >> (8 * 2);
-                rbuf[2] = tmp >> (8 * 1);
-                rbuf[3] = tmp;
+                ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 3));
+                ATA_SCSI_RBUF_SET(1, last_lba >> (8 * 2));
+                ATA_SCSI_RBUF_SET(2, last_lba >> (8 * 1));
+                ATA_SCSI_RBUF_SET(3, last_lba);
 
                 /* sector size */
-                tmp = ATA_SECT_SIZE;
-                rbuf[6] = tmp >> 8;
-                rbuf[7] = tmp;
-
+                ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8);
+                ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE);
         } else {
                 /* sector count, 64-bit */
-                tmp = n_sectors >> (8 * 4);
-                rbuf[2] = tmp >> (8 * 3);
-                rbuf[3] = tmp >> (8 * 2);
-                rbuf[4] = tmp >> (8 * 1);
-                rbuf[5] = tmp;
-                tmp = n_sectors;
-                rbuf[6] = tmp >> (8 * 3);
-                rbuf[7] = tmp >> (8 * 2);
-                rbuf[8] = tmp >> (8 * 1);
-                rbuf[9] = tmp;
+                ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7));
+                ATA_SCSI_RBUF_SET(1, last_lba >> (8 * 6));
+                ATA_SCSI_RBUF_SET(2, last_lba >> (8 * 5));
+                ATA_SCSI_RBUF_SET(3, last_lba >> (8 * 4));
+                ATA_SCSI_RBUF_SET(4, last_lba >> (8 * 3));
+                ATA_SCSI_RBUF_SET(5, last_lba >> (8 * 2));
+                ATA_SCSI_RBUF_SET(6, last_lba >> (8 * 1));
+                ATA_SCSI_RBUF_SET(7, last_lba);
 
                 /* sector size */
-                tmp = ATA_SECT_SIZE;
-                rbuf[12] = tmp >> 8;
-                rbuf[13] = tmp;
+                ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8);
+                ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE);
         }
 
         return 0;
@@ -2319,7 +2201,7 @@ static void atapi_sense_complete(struct ata_queued_cmd *qc)
                  * a sense descriptors, since that's only
                  * correct for ATA, not ATAPI
                  */
-                ata_gen_ata_desc_sense(qc);
+                ata_gen_passthru_sense(qc);
         }
 
         qc->scsidone(qc->scsicmd);
@@ -2394,7 +2276,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
                          * sense descriptors, since that's only
                          * correct for ATA, not ATAPI
                          */
-                        ata_gen_ata_desc_sense(qc);
+                        ata_gen_passthru_sense(qc);
                 }
 
                 /* SCSI EH automatically locks door if sdev->locked is
@@ -2427,7 +2309,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
                  * a sense descriptors, since that's only
                  * correct for ATA, not ATAPI
                  */
-                ata_gen_ata_desc_sense(qc);
+                ata_gen_passthru_sense(qc);
         } else {
                 u8 *scsicmd = cmd->cmnd;
 
@@ -3183,10 +3065,12 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
                         rc = -EINVAL;
         }
 
-        if (rc == 0)
+        if (rc == 0) {
                 ata_port_schedule_eh(ap);
-
-        spin_unlock_irqrestore(ap->lock, flags);
+                spin_unlock_irqrestore(ap->lock, flags);
+                ata_port_wait_eh(ap);
+        } else
+                spin_unlock_irqrestore(ap->lock, flags);
 
         return rc;
 }
@@ -3207,15 +3091,27 @@ void ata_scsi_dev_rescan(struct work_struct *work)
 {
         struct ata_port *ap =
                 container_of(work, struct ata_port, scsi_rescan_task);
-        struct ata_device *dev;
+        unsigned long flags;
         unsigned int i;
 
+        spin_lock_irqsave(ap->lock, flags);
+
         for (i = 0; i < ATA_MAX_DEVICES; i++) {
-                dev = &ap->device[i];
+                struct ata_device *dev = &ap->device[i];
+                struct scsi_device *sdev = dev->sdev;
 
-                if (ata_dev_enabled(dev) && dev->sdev)
-                        scsi_rescan_device(&(dev->sdev->sdev_gendev));
+                if (!ata_dev_enabled(dev) || !sdev)
+                        continue;
+                if (scsi_device_get(sdev))
+                        continue;
+
+                spin_unlock_irqrestore(ap->lock, flags);
+                scsi_rescan_device(&(sdev->sdev_gendev));
+                scsi_device_put(sdev);
+                spin_lock_irqsave(ap->lock, flags);
         }
+
+        spin_unlock_irqrestore(ap->lock, flags);
 }
 
 /**
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 7645f2b30ccf..10ee22ae5c15 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -39,6 +39,35 @@
 #include "libata.h"
 
 /**
+ *      ata_irq_on - Enable interrupts on a port.
+ *      @ap: Port on which interrupts are enabled.
+ *
+ *      Enable interrupts on a legacy IDE device using MMIO or PIO,
+ *      wait for idle, clear any pending interrupts.
+ *
+ *      LOCKING:
+ *      Inherited from caller.
+ */
+u8 ata_irq_on(struct ata_port *ap)
+{
+        struct ata_ioports *ioaddr = &ap->ioaddr;
+        u8 tmp;
+
+        ap->ctl &= ~ATA_NIEN;
+        ap->last_ctl = ap->ctl;
+
+        if (ap->flags & ATA_FLAG_MMIO)
+                writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
+        else
+                outb(ap->ctl, ioaddr->ctl_addr);
+        tmp = ata_wait_idle(ap);
+
+        ap->ops->irq_clear(ap);
+
+        return tmp;
+}
+
+/**
  *      ata_tf_load_pio - send taskfile registers to host controller
  *      @ap: Port to which output is sent
  *      @tf: ATA taskfile register set
@@ -671,6 +700,14 @@ void ata_bmdma_freeze(struct ata_port *ap)
                 writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr);
         else
                 outb(ap->ctl, ioaddr->ctl_addr);
+
+        /* Under certain circumstances, some controllers raise IRQ on
+         * ATA_NIEN manipulation.  Also, many controllers fail to mask
+         * previously pending IRQ on ATA_NIEN assertion.  Clear it.
+         */
+        ata_chk_status(ap);
+
+        ap->ops->irq_clear(ap);
 }
 
 /**
@@ -714,7 +751,6 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
                         ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
                         ata_postreset_fn_t postreset)
 {
-        struct ata_eh_context *ehc = &ap->eh_context;
         struct ata_queued_cmd *qc;
         unsigned long flags;
         int thaw = 0;
@@ -732,9 +768,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
                    qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
                 u8 host_stat;
 
-                host_stat = ata_bmdma_status(ap);
-
-                ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
+                host_stat = ap->ops->bmdma_status(ap);
 
                 /* BMDMA controllers indicate host bus error by
                  * setting DMA_ERR bit and timing out.  As it wasn't
@@ -877,6 +911,7 @@ static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
                 return NULL;
 
         probe_ent->n_ports = 2;
+        probe_ent->irq_flags = IRQF_SHARED;
 
         if (port_mask & ATA_PORT_PRIMARY) {
                 probe_ent->irq = ATA_PRIMARY_IRQ;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 7e0f3aff873d..81ae41d5f23f 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -39,26 +39,39 @@ struct ata_scsi_args {
 };
 
 /* libata-core.c */
+enum {
+        /* flags for ata_dev_read_id() */
+        ATA_READID_POSTRESET    = (1 << 0), /* reading ID after reset */
+};
+
 extern struct workqueue_struct *ata_aux_wq;
 extern int atapi_enabled;
 extern int atapi_dmadir;
 extern int libata_fua;
 extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
-extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
+extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
+                           u64 block, u32 n_block, unsigned int tf_flags,
+                           unsigned int tag);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
 extern void ata_dev_disable(struct ata_device *dev);
 extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_device *dev,
                                   struct ata_taskfile *tf, const u8 *cdb,
                                   int dma_dir, void *buf, unsigned int buflen);
+extern unsigned ata_exec_internal_sg(struct ata_device *dev,
+                                     struct ata_taskfile *tf, const u8 *cdb,
+                                     int dma_dir, struct scatterlist *sg,
+                                     unsigned int n_elem);
 extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
-                           int post_reset, u16 *id);
-extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
-extern int ata_dev_configure(struct ata_device *dev, int print_info);
+                           unsigned int flags, u16 *id);
+extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
+extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_port *ap);
 extern int sata_set_spd_needed(struct ata_port *ap);
 extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
 extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
+extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
@@ -120,4 +133,7 @@ extern void ata_scsi_error(struct Scsi_Host *host);
 extern void ata_port_wait_eh(struct ata_port *ap);
 extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
 
+/* libata-sff.c */
+extern u8 ata_irq_on(struct ata_port *ap);
+
 #endif /* __LIBATA_H__ */
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 64eed99f6814..c5d61d1911a5 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.6.6"
+#define DRV_VERSION "0.7.2"
 
 /*
  *      Cable special cases
@@ -78,7 +78,7 @@ static int ali_c2_cable_detect(struct ata_port *ap)
            implement the detect logic */
 
         if (ali_cable_override(pdev))
-                return ATA_CBL_PATA80;
+                return ATA_CBL_PATA40_SHORT;
 
         /* Host view cable detect 0x4A bit 0 primary bit 1 secondary
            Bit set for 40 pin */
@@ -337,9 +337,6 @@ static struct scsi_host_template ali_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        /* Keep LBA28 counts so large I/O's don't turn LBA48 and PIO
-           with older controllers. Not locked so will grow on C5 or later */
-        .max_sectors            = 255,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -348,6 +345,8 @@ static struct scsi_host_template ali_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 /*
@@ -497,6 +496,69 @@ static struct ata_port_operations ali_c5_port_ops = {
         .host_stop      = ata_host_stop
 };
 
+
+/**
+ *      ali_init_chipset        -       chip setup function
+ *      @pdev: PCI device of ATA controller
+ *
+ *      Perform the setup on the device that must be done both at boot
+ *      and at resume time.
+ */
+ 
+static void ali_init_chipset(struct pci_dev *pdev)
+{
+        u8 rev, tmp;
+        struct pci_dev *north, *isa_bridge;
+
+        pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+
+        /*
+         * The chipset revision selects the driver operations and
+         * mode data.
+         */
+
+        if (rev >= 0x20 && rev < 0xC2) {
+                /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+                pci_read_config_byte(pdev, 0x4B, &tmp);
+                /* Clear CD-ROM DMA write bit */
+                tmp &= 0x7F;
+                pci_write_config_byte(pdev, 0x4B, tmp);
+        } else if (rev >= 0xC2) {
+                /* Enable cable detection logic */
+                pci_read_config_byte(pdev, 0x4B, &tmp);
+                pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
+        }
+        north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+        isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+        if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+                /* Configure the ALi bridge logic. For non ALi rely on BIOS.
+                   Set the south bridge enable bit */
+                pci_read_config_byte(isa_bridge, 0x79, &tmp);
+                if (rev == 0xC2)
+                        pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+                else if (rev > 0xC2 && rev < 0xC5)
+                        pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+        }
+        if (rev >= 0x20) {
+                /*
+                 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
+                 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
+                 * via 0x54/55.
+                 */
+                pci_read_config_byte(pdev, 0x53, &tmp);
+                if (rev <= 0x20)
+                        tmp &= ~0x02;
+                if (rev >= 0xc7)
+                        tmp |= 0x03;
+                else
+                        tmp |= 0x01;    /* CD_ROM enable for DMA */
+                pci_write_config_byte(pdev, 0x53, tmp);
+        }
+        pci_dev_put(isa_bridge);
+        pci_dev_put(north);
+        ata_pci_clear_simplex(pdev);
+}
 /**
  *      ali_init_one            -       discovery callback
  *      @pdev: PCI device ID
@@ -570,7 +632,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
         static struct ata_port_info *port_info[2];
         u8 rev, tmp;
-        struct pci_dev *north, *isa_bridge;
+        struct pci_dev *isa_bridge;
 
         pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 
@@ -582,11 +644,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         if (rev < 0x20) {
                 port_info[0] = port_info[1] = &info_early;
         } else if (rev < 0xC2) {
-                /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
-                pci_read_config_byte(pdev, 0x4B, &tmp);
-                /* Clear CD-ROM DMA write bit */
-                tmp &= 0x7F;
-                pci_write_config_byte(pdev, 0x4B, tmp);
                 port_info[0] = port_info[1] = &info_20;
         } else if (rev == 0xC2) {
                 port_info[0] = port_info[1] = &info_c2;
@@ -597,54 +654,25 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         } else
                 port_info[0] = port_info[1] = &info_c5;
 
-        if (rev >= 0xC2) {
-                /* Enable cable detection logic */
-                pci_read_config_byte(pdev, 0x4B, &tmp);
-                pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
-        }
-
-        north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
+        ali_init_chipset(pdev);
+        
         isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
-        if (north && north->vendor == PCI_VENDOR_ID_AL) {
-                /* Configure the ALi bridge logic. For non ALi rely on BIOS.
-                   Set the south bridge enable bit */
-                pci_read_config_byte(isa_bridge, 0x79, &tmp);
-                if (rev == 0xC2)
-                        pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
-                else if (rev > 0xC2)
-                        pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
-        }
-
-        if (rev >= 0x20) {
-                if (rev < 0xC2) {
-                        /* Are we paired with a UDMA capable chip */
-                        pci_read_config_byte(isa_bridge, 0x5E, &tmp);
-                        if ((tmp & 0x1E) == 0x12)
-                                port_info[0] = port_info[1] = &info_20_udma;
-                }
-                /*
-                 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
-                 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
-                 * via 0x54/55.
-                 */
-                pci_read_config_byte(pdev, 0x53, &tmp);
-                if (rev <= 0x20)
-                        tmp &= ~0x02;
-                if (rev >= 0xc7)
-                        tmp |= 0x03;
-                else
-                        tmp |= 0x01;    /* CD_ROM enable for DMA */
-                pci_write_config_byte(pdev, 0x53, tmp);
+        if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+                /* Are we paired with a UDMA capable chip */
+                pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+                if ((tmp & 0x1E) == 0x12)
+                        port_info[0] = port_info[1] = &info_20_udma;
+                pci_dev_put(isa_bridge);
         }
-
-        pci_dev_put(isa_bridge);
-        pci_dev_put(north);
-
-        ata_pci_clear_simplex(pdev);
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int ali_reinit_one(struct pci_dev *pdev)
+{
+        ali_init_chipset(pdev);
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id ali[] = {
         { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
         { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), },
@@ -656,7 +684,9 @@ static struct pci_driver ali_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = ali,
         .probe          = ali_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ali_reinit_one,
 };
 
 static int __init ali_init(void)
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 8be46a63af74..a6b330089f22 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.2.7"
 
 /**
  *      timing_setup            -       shared timing computation and load
@@ -326,7 +326,6 @@ static struct scsi_host_template amd_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -335,6 +334,8 @@ static struct scsi_host_template amd_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations amd33_port_ops = {
@@ -662,6 +663,23 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int amd_reinit_one(struct pci_dev *pdev)
+{
+        if (pdev->vendor == PCI_VENDOR_ID_AMD) {
+                u8 fifo;
+                pci_read_config_byte(pdev, 0x41, &fifo);
+                if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
+                        /* FIFO is broken */
+                        pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
+                else
+                        pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+                if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
+                    pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
+                        ata_pci_clear_simplex(pdev);
+        }
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id amd[] = {
         { PCI_VDEVICE(AMD,      PCI_DEVICE_ID_AMD_COBRA_7401),          0 },
         { PCI_VDEVICE(AMD,      PCI_DEVICE_ID_AMD_VIPER_7409),          1 },
@@ -689,7 +707,9 @@ static struct pci_driver amd_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = amd,
         .probe          = amd_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = amd_reinit_one,
 };
 
 static int __init amd_init(void)
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 2cd30761ca1f..37bc1323bda7 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -307,7 +307,6 @@ static struct scsi_host_template artop_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 4e1d3b59adbb..6f6672c55131 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
 
 enum {
         ATIIXP_IDE_PIO_TIMING   = 0x40,
@@ -209,7 +209,6 @@ static struct scsi_host_template atiixp_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -218,6 +217,8 @@ static struct scsi_host_template atiixp_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations atiixp_port_ops = {
@@ -281,7 +282,9 @@ static struct pci_driver atiixp_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = atiixp,
         .probe          = atiixp_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .resume         = ata_pci_device_resume,
+        .suspend        = ata_pci_device_suspend,
 };
 
 static int __init atiixp_init(void)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 29a60df465da..15841a563694 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
 
 /*
  * CMD64x specific registers definition.
@@ -268,7 +268,6 @@ static struct scsi_host_template cmd64x_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -277,6 +276,8 @@ static struct scsi_host_template cmd64x_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cmd64x_port_ops = {
@@ -469,6 +470,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int cmd64x_reinit_one(struct pci_dev *pdev)
+{
+        u8 mrdmode;
+        pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+        pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+        mrdmode &= ~ 0x30;      /* IRQ set up */
+        mrdmode |= 0x02;        /* Memory read line enable */
+        pci_write_config_byte(pdev, MRDMODE, mrdmode);
+#ifdef CONFIG_PPC
+        pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id cmd64x[] = {
         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
@@ -482,7 +497,9 @@ static struct pci_driver cmd64x_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = cmd64x,
         .probe          = cmd64x_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = cmd64x_reinit_one,
 };
 
 static int __init cmd64x_init(void)
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 33d2b88f9c79..9f165a8e032d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_cs5520"
-#define DRV_VERSION     "0.6.2"
+#define DRV_VERSION     "0.6.3"
 
 struct pio_clocks
 {
@@ -159,7 +159,6 @@ static struct scsi_host_template cs5520_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -168,6 +167,8 @@ static struct scsi_host_template cs5520_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cs5520_port_ops = {
@@ -297,6 +298,22 @@ static void __devexit cs5520_remove_one(struct pci_dev *pdev)
         dev_set_drvdata(dev, NULL);
 }
 
+/**
+ *      cs5520_reinit_one       -       device resume
+ *      @pdev: PCI device
+ *
+ *      Do any reconfiguration work needed by a resume from RAM. We need
+ *      to restore DMA mode support on BIOSen which disabled it
+ */
+ 
+static int cs5520_reinit_one(struct pci_dev *pdev)
+{
+        u8 pcicfg;
+        pci_read_config_byte(pdev, 0x60, &pcicfg);
+        if ((pcicfg & 0x40) == 0)
+                pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
+        return ata_pci_device_resume(pdev);
+}
 /* For now keep DMA off. We can set it for all but A rev CS5510 once the
    core ATA code can handle it */
 
@@ -311,7 +328,9 @@ static struct pci_driver cs5520_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = pata_cs5520,
         .probe          = cs5520_init_one,
-        .remove         = cs5520_remove_one
+        .remove         = cs5520_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = cs5520_reinit_one,
 };
 
 static int __init cs5520_init(void)
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 981f49223469..1c628014dae6 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME        "pata_cs5530"
-#define DRV_VERSION     "0.6"
+#define DRV_VERSION     "0.7.1"
 
 /**
  *      cs5530_set_piomode              -       PIO setup
@@ -173,7 +173,6 @@ static struct scsi_host_template cs5530_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -182,6 +181,8 @@ static struct scsi_host_template cs5530_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cs5530_port_ops = {
@@ -239,38 +240,18 @@ static int cs5530_is_palmax(void)
         return 0;
 }
 
+
 /**
- *      cs5530_init_one         -       Initialise a CS5530
- *      @dev: PCI device
- *      @id: Entry in match table
+ *      cs5530_init_chip        -       Chipset init
  *
- *      Install a driver for the newly found CS5530 companion chip. Most of
- *      this is just housekeeping. We have to set the chip up correctly and
- *      turn off various bits of emulation magic.
+ *      Perform the chip initialisation work that is shared between both
+ *      setup and resume paths
  */
-
-static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+ 
+static int cs5530_init_chip(void)
 {
-        int compiler_warning_pointless_fix;
-        struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
-        static struct ata_port_info info = {
-                .sht = &cs5530_sht,
-                .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
-                .pio_mask = 0x1f,
-                .mwdma_mask = 0x07,
-                .udma_mask = 0x07,
-                .port_ops = &cs5530_port_ops
-        };
-        /* The docking connector doesn't do UDMA, and it seems not MWDMA */
-        static struct ata_port_info info_palmax_secondary = {
-                .sht = &cs5530_sht,
-                .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
-                .pio_mask = 0x1f,
-                .port_ops = &cs5530_port_ops
-        };
-        static struct ata_port_info *port_info[2] = { &info, &info };
+        struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
 
-        dev = NULL;
         while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
                 switch (dev->device) {
                         case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
@@ -291,7 +272,7 @@ static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         }
 
         pci_set_master(cs5530_0);
-        compiler_warning_pointless_fix = pci_set_mwi(cs5530_0);
+        pci_set_mwi(cs5530_0);
 
         /*
          * Set PCI CacheLineSize to 16-bytes:
@@ -339,13 +320,7 @@ static int cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
         pci_dev_put(master_0);
         pci_dev_put(cs5530_0);
-
-        if (cs5530_is_palmax())
-                port_info[1] = &info_palmax_secondary;
-
-        /* Now kick off ATA set up */
-        return ata_pci_init_one(dev, port_info, 2);
-
+        return 0;
 fail_put:
         if (master_0)
                 pci_dev_put(master_0);
@@ -354,6 +329,53 @@ fail_put:
         return -ENODEV;
 }
 
+/**
+ *      cs5530_init_one         -       Initialise a CS5530
+ *      @dev: PCI device
+ *      @id: Entry in match table
+ *
+ *      Install a driver for the newly found CS5530 companion chip. Most of
+ *      this is just housekeeping. We have to set the chip up correctly and
+ *      turn off various bits of emulation magic.
+ */
+
+static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+        static struct ata_port_info info = {
+                .sht = &cs5530_sht,
+                .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+                .pio_mask = 0x1f,
+                .mwdma_mask = 0x07,
+                .udma_mask = 0x07,
+                .port_ops = &cs5530_port_ops
+        };
+        /* The docking connector doesn't do UDMA, and it seems not MWDMA */
+        static struct ata_port_info info_palmax_secondary = {
+                .sht = &cs5530_sht,
+                .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+                .pio_mask = 0x1f,
+                .port_ops = &cs5530_port_ops
+        };
+        static struct ata_port_info *port_info[2] = { &info, &info };
+        
+        /* Chip initialisation */
+        if (cs5530_init_chip())
+                return -ENODEV;
+                
+        if (cs5530_is_palmax())
+                port_info[1] = &info_palmax_secondary;
+
+        /* Now kick off ATA set up */
+        return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static int cs5530_reinit_one(struct pci_dev *pdev)
+{
+        /* If we fail on resume we are doomed */
+        BUG_ON(cs5530_init_chip());
+        return ata_pci_device_resume(pdev);
+}
+        
 static const struct pci_device_id cs5530[] = {
         { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
 
@@ -364,7 +386,9 @@ static struct pci_driver cs5530_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = cs5530,
         .probe          = cs5530_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = cs5530_reinit_one,
 };
 
 static int __init cs5530_init(void)
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 8dafa4a49fdc..e3efec4ffc79 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -39,7 +39,7 @@
 #include <asm/msr.h>
 
 #define DRV_NAME        "cs5535"
-#define DRV_VERSION     "0.2.10"
+#define DRV_VERSION     "0.2.11"
 
 /*
  *      The Geode (Aka Athlon GX now) uses an internal MSR based
@@ -177,7 +177,6 @@ static struct scsi_host_template cs5535_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -186,6 +185,8 @@ static struct scsi_host_template cs5535_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cs5535_port_ops = {
@@ -268,7 +269,9 @@ static struct pci_driver cs5535_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = cs5535,
         .probe          = cs5535_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init cs5535_init(void)
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 5a0b811907ee..e2a95699bae7 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -18,7 +18,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cypress"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "0.1.4"
 
 /* here are the offset definitions for the registers */
 
@@ -128,7 +128,6 @@ static struct scsi_host_template cy82c693_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -137,6 +136,8 @@ static struct scsi_host_template cy82c693_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
@@ -204,7 +205,9 @@ static struct pci_driver cy82c693_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = cy82c693,
         .probe          = cy82c693_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init cy82c693_init(void)
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 755f79279de3..edf8a63f50af 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_efar"
-#define DRV_VERSION     "0.4.2"
+#define DRV_VERSION     "0.4.3"
 
 /**
  *      efar_pre_reset  -       check for 40/80 pin
@@ -226,7 +226,6 @@ static struct scsi_host_template efar_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -235,6 +234,8 @@ static struct scsi_host_template efar_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations efar_ops = {
@@ -316,6 +317,8 @@ static struct pci_driver efar_pci_driver = {
         .id_table               = efar_pci_tbl,
         .probe                  = efar_init_one,
         .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = ata_pci_device_resume,
 };
 
 static int __init efar_init(void)
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c0e150a9586b..2663599a7c02 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt366"
-#define DRV_VERSION     "0.5"
+#define DRV_VERSION     "0.5.3"
 
 struct hpt_clock {
         u8      xfer_speed;
@@ -222,9 +222,17 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_pre_reset(struct ata_port *ap)
 {
+        static const struct pci_bits hpt36x_enable_bits[] = {
+                { 0x50, 1, 0x04, 0x04 },
+                { 0x54, 1, 0x04, 0x04 }
+        };
+
         u8 ata66;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
+        if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
+                return -ENOENT;
+                
         pci_read_config_byte(pdev, 0x5A, &ata66);
         if (ata66 & (1 << ap->port_no))
                 ap->cbl = ATA_CBL_PATA40;
@@ -322,7 +330,6 @@ static struct scsi_host_template hpt36x_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -331,6 +338,8 @@ static struct scsi_host_template hpt36x_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 /*
@@ -373,6 +382,27 @@ static struct ata_port_operations hpt366_port_ops = {
 };
 
 /**
+ *      hpt36x_init_chipset     -       common chip setup
+ *      @dev: PCI device
+ *
+ *      Perform the chip setup work that must be done at both init and
+ *      resume time
+ */
+
+static void hpt36x_init_chipset(struct pci_dev *dev)
+{
+        u8 drive_fast;
+        pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+        pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+        pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+        pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+
+        pci_read_config_byte(dev, 0x51, &drive_fast);
+        if (drive_fast & 0x80)
+                pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+}
+
+/**
  *      hpt36x_init_one         -       Initialise an HPT366/368
  *      @dev: PCI device
  *      @id: Entry in match table
@@ -407,7 +437,6 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
         u32 class_rev;
         u32 reg1;
-        u8 drive_fast;
 
         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xFF;
@@ -417,14 +446,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         if (class_rev > 2)
                         return -ENODEV;
 
-        pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
-        pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
-        pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
-        pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
-
-        pci_read_config_byte(dev, 0x51, &drive_fast);
-        if (drive_fast & 0x80)
-                pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+        hpt36x_init_chipset(dev);
 
         pci_read_config_dword(dev, 0x40,  &reg1);
 
@@ -445,9 +467,15 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         return ata_pci_init_one(dev, port_info, 2);
 }
 
+static int hpt36x_reinit_one(struct pci_dev *dev)
+{
+        hpt36x_init_chipset(dev);
+        return ata_pci_device_resume(dev);
+}
+
+
 static const struct pci_device_id hpt36x[] = {
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
-
         { },
 };
 
@@ -455,7 +483,9 @@ static struct pci_driver hpt36x_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = hpt36x,
         .probe          = hpt36x_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = hpt36x_reinit_one,
 };
 
 static int __init hpt36x_init(void)
@@ -463,13 +493,11 @@ static int __init hpt36x_init(void)
         return pci_register_driver(&hpt36x_pci_driver);
 }
 
-
 static void __exit hpt36x_exit(void)
 {
         pci_unregister_driver(&hpt36x_pci_driver);
 }
 
-
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
 MODULE_LICENSE("GPL");
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 1eeb16f0fb02..47082df7199e 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -768,7 +768,6 @@ static struct scsi_host_template hpt37x_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 47d7664e9eee..f6817b4093a4 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -334,7 +334,6 @@ static struct scsi_host_template hpt3x2n_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index d216cc564b56..5f1d385eb592 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x3"
-#define DRV_VERSION     "0.4.1"
+#define DRV_VERSION     "0.4.2"
 
 static int hpt3x3_probe_init(struct ata_port *ap)
 {
@@ -111,7 +111,6 @@ static struct scsi_host_template hpt3x3_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -120,6 +119,8 @@ static struct scsi_host_template hpt3x3_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
@@ -158,6 +159,27 @@ static struct ata_port_operations hpt3x3_port_ops = {
 };
 
 /**
+ *      hpt3x3_init_chipset     -       chip setup
+ *      @dev: PCI device
+ *
+ *      Perform the setup required at boot and on resume.
+ */
+ 
+static void hpt3x3_init_chipset(struct pci_dev *dev)
+{
+        u16 cmd;
+        /* Initialize the board */
+        pci_write_config_word(dev, 0x80, 0x00);
+        /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */
+        pci_read_config_word(dev, PCI_COMMAND, &cmd);
+        if (cmd & PCI_COMMAND_MEMORY)
+                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
+        else
+                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
+}
+
+
+/**
  *      hpt3x3_init_one         -       Initialise an HPT343/363
  *      @dev: PCI device
  *      @id: Entry in match table
@@ -178,21 +200,18 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 .port_ops = &hpt3x3_port_ops
         };
         static struct ata_port_info *port_info[2] = { &info, &info };
-        u16 cmd;
-
-        /* Initialize the board */
-        pci_write_config_word(dev, 0x80, 0x00);
-        /* Check if it is a 343 or a 363. 363 has COMMAND_MEMORY set */
-        pci_read_config_word(dev, PCI_COMMAND, &cmd);
-        if (cmd & PCI_COMMAND_MEMORY)
-                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
-        else
-                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 
+        hpt3x3_init_chipset(dev);
         /* Now kick off ATA set up */
         return ata_pci_init_one(dev, port_info, 2);
 }
 
+static int hpt3x3_reinit_one(struct pci_dev *dev)
+{
+        hpt3x3_init_chipset(dev);
+        return ata_pci_device_resume(dev);
+}
+
 static const struct pci_device_id hpt3x3[] = {
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
 
@@ -203,7 +222,9 @@ static struct pci_driver hpt3x3_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = hpt3x3,
         .probe          = hpt3x3_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = hpt3x3_reinit_one,
 };
 
 static int __init hpt3x3_init(void)
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 40ca2b82b7fc..a97d55ae95c9 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -27,7 +27,6 @@ static struct scsi_host_template isapnp_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 7f68f14be6fd..0b56ff3d1cfe 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
 
 struct it821x_dev
 {
@@ -666,9 +666,6 @@ static struct scsi_host_template it821x_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        /* 255 sectors to begin with. This is locked in smart mode but not
-           in pass through */
-        .max_sectors            = 255,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -677,6 +674,8 @@ static struct scsi_host_template it821x_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations it821x_smart_port_ops = {
@@ -809,6 +808,14 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int it821x_reinit_one(struct pci_dev *pdev)
+{
+        /* Resume - turn raid back off if need be */
+        if (it8212_noraid)
+                it821x_disable_raid(pdev);
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id it821x[] = {
         { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
         { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
@@ -820,7 +827,9 @@ static struct pci_driver it821x_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = it821x,
         .probe          = it821x_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = it821x_reinit_one,
 };
 
 static int __init it821x_init(void)
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
new file mode 100644
index 000000000000..cb8924109f59
--- /dev/null
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -0,0 +1,271 @@
+/*
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (c) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * An ATA driver to handle a Compact Flash connected
+ * to the ixp4xx expansion bus in TrueIDE mode. The CF
+ * must have it chip selects connected to two CS lines
+ * on the ixp4xx. The interrupt line is optional, if not
+ * specified the driver will run in polling mode.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <scsi/scsi_host.h>
+
+#define DRV_NAME        "pata_ixp4xx_cf"
+#define DRV_VERSION     "0.1.1"
+
+static void ixp4xx_set_mode(struct ata_port *ap)
+{
+        int i;
+
+        for (i = 0; i < ATA_MAX_DEVICES; i++) {
+                struct ata_device *dev = &ap->device[i];
+                if (ata_dev_enabled(dev)) {
+                        dev->pio_mode = XFER_PIO_0;
+                        dev->xfer_mode = XFER_PIO_0;
+                        dev->xfer_shift = ATA_SHIFT_PIO;
+                        dev->flags |= ATA_DFLAG_PIO;
+                }
+        }
+}
+
+static void ixp4xx_phy_reset(struct ata_port *ap)
+{
+        ap->cbl = ATA_CBL_PATA40;
+        ata_port_probe(ap);
+        ata_bus_reset(ap);
+}
+
+static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
+                                unsigned int buflen, int write_data)
+{
+        unsigned int i;
+        unsigned int words = buflen >> 1;
+        u16 *buf16 = (u16 *) buf;
+        struct ata_port *ap = adev->ap;
+        void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
+        struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
+
+        /* set the expansion bus in 16bit mode and restore
+         * 8 bit mode after the transaction.
+         */
+        *data->cs0_cfg &= ~(0x01);
+        udelay(100);
+
+        /* Transfer multiple of 2 bytes */
+        if (write_data) {
+                for (i = 0; i < words; i++)
+                        writew(buf16[i], mmio);
+        } else {
+                for (i = 0; i < words; i++)
+                        buf16[i] = readw(mmio);
+        }
+
+        /* Transfer trailing 1 byte, if any. */
+        if (unlikely(buflen & 0x01)) {
+                u16 align_buf[1] = { 0 };
+                unsigned char *trailing_buf = buf + buflen - 1;
+
+                if (write_data) {
+                        memcpy(align_buf, trailing_buf, 1);
+                        writew(align_buf[0], mmio);
+                } else {
+                        align_buf[0] = readw(mmio);
+                        memcpy(trailing_buf, align_buf, 1);
+                }
+        }
+
+        udelay(100);
+        *data->cs0_cfg |= 0x01;
+}
+
+static void ixp4xx_irq_clear(struct ata_port *ap)
+{
+}
+
+static void ixp4xx_host_stop (struct ata_host *host)
+{
+        struct ixp4xx_pata_data *data = host->dev->platform_data;
+
+        iounmap(data->cs0);
+        iounmap(data->cs1);
+}
+
+static struct scsi_host_template ixp4xx_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+        .slave_destroy          = ata_scsi_slave_destroy,
+        .bios_param             = ata_std_bios_param,
+};
+
+static struct ata_port_operations ixp4xx_port_ops = {
+        .set_mode       = ixp4xx_set_mode,
+        .mode_filter    = ata_pci_default_filter,
+
+        .port_disable   = ata_port_disable,
+        .tf_load        = ata_tf_load,
+        .tf_read        = ata_tf_read,
+        .check_status   = ata_check_status,
+        .exec_command   = ata_exec_command,
+        .dev_select     = ata_std_dev_select,
+
+        .qc_prep        = ata_qc_prep,
+        .qc_issue       = ata_qc_issue_prot,
+        .eng_timeout    = ata_eng_timeout,
+        .data_xfer      = ixp4xx_mmio_data_xfer,
+
+        .irq_handler    = ata_interrupt,
+        .irq_clear      = ixp4xx_irq_clear,
+
+        .port_start     = ata_port_start,
+        .port_stop      = ata_port_stop,
+        .host_stop      = ixp4xx_host_stop,
+
+        .phy_reset      = ixp4xx_phy_reset,
+};
+
+static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
+                                struct ixp4xx_pata_data *data)
+{
+        ioaddr->cmd_addr        = (unsigned long) data->cs0;
+        ioaddr->altstatus_addr  = (unsigned long) data->cs1 + 0x06;
+        ioaddr->ctl_addr        = (unsigned long) data->cs1 + 0x06;
+
+        ata_std_ports(ioaddr);
+
+#ifndef __ARMEB__
+
+        /* adjust the addresses to handle the address swizzling of the
+         * ixp4xx in little endian mode.
+         */
+
+        ioaddr->data_addr       ^= 0x02;
+        ioaddr->cmd_addr        ^= 0x03;
+        ioaddr->altstatus_addr  ^= 0x03;
+        ioaddr->ctl_addr        ^= 0x03;
+        ioaddr->error_addr      ^= 0x03;
+        ioaddr->feature_addr    ^= 0x03;
+        ioaddr->nsect_addr      ^= 0x03;
+        ioaddr->lbal_addr       ^= 0x03;
+        ioaddr->lbam_addr       ^= 0x03;
+        ioaddr->lbah_addr       ^= 0x03;
+        ioaddr->device_addr     ^= 0x03;
+        ioaddr->status_addr     ^= 0x03;
+        ioaddr->command_addr    ^= 0x03;
+#endif
+}
+
+static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
+{
+        int ret;
+        unsigned int irq;
+        struct resource *cs0, *cs1;
+        struct ata_probe_ent ae;
+
+        struct ixp4xx_pata_data *data = pdev->dev.platform_data;
+
+        cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+        if (!cs0 || !cs1)
+                return -EINVAL;
+
+        pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
+
+        data->cs0 = ioremap(cs0->start, 0x1000);
+        data->cs1 = ioremap(cs1->start, 0x1000);
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq)
+                set_irq_type(irq, IRQT_HIGH);
+
+        /* Setup expansion bus chip selects */
+        *data->cs0_cfg = data->cs0_bits;
+        *data->cs1_cfg = data->cs1_bits;
+
+        memset(&ae, 0, sizeof(struct ata_probe_ent));
+        INIT_LIST_HEAD(&ae.node);
+
+        ae.dev          = &pdev->dev;
+        ae.port_ops     = &ixp4xx_port_ops;
+        ae.sht          = &ixp4xx_sht;
+        ae.n_ports      = 1;
+        ae.pio_mask     = 0x1f; /* PIO4 */
+        ae.irq          = irq;
+        ae.irq_flags    = 0;
+        ae.port_flags   = ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
+                        | ATA_FLAG_NO_ATAPI | ATA_FLAG_SRST;
+
+        /* run in polling mode if no irq has been assigned */
+        if (!irq)
+                ae.port_flags |= ATA_FLAG_PIO_POLLING;
+
+        ixp4xx_setup_port(&ae.port[0], data);
+
+        dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+        ret = ata_device_add(&ae);
+        if (ret == 0)
+                return -ENODEV;
+
+        return 0;
+}
+
+static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
+{
+        struct ata_host *host = platform_get_drvdata(dev);
+
+        ata_host_remove(host);
+        platform_set_drvdata(dev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver ixp4xx_pata_platform_driver = {
+        .driver  = {
+                .name   = DRV_NAME,
+                .owner  = THIS_MODULE,
+        },
+        .probe          = ixp4xx_pata_probe,
+        .remove         = __devexit_p(ixp4xx_pata_remove),
+};
+
+static int __init ixp4xx_pata_init(void)
+{
+        return platform_driver_register(&ixp4xx_pata_platform_driver);
+}
+
+static void __exit ixp4xx_pata_exit(void)
+{
+        platform_driver_unregister(&ixp4xx_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("low-level driver for ixp4xx Compact Flash PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ixp4xx_pata_init);
+module_exit(ixp4xx_pata_exit);
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 0210b10d49cd..2d661cb4df3c 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -19,7 +19,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_jmicron"
-#define DRV_VERSION     "0.1.2"
+#define DRV_VERSION     "0.1.4"
 
 typedef enum {
         PORT_PATA0 = 0,
@@ -128,8 +128,6 @@ static struct scsi_host_template jmicron_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        /* Special handling needed if you have sector or LBA48 limits */
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -213,12 +211,11 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 
                 /* FIXME: We may want a way to override this in future */
                 pci_write_config_byte(pdev, 0x41, 0xa1);
-        }
-
-        /* PATA controller is fn 1, AHCI is fn 0 */
-        if (PCI_FUNC(pdev->devfn) != 1)
-                return -ENODEV;
 
+                /* PATA controller is fn 1, AHCI is fn 0 */
+                if (PCI_FUNC(pdev->devfn) != 1)
+                        return -ENODEV;
+        }
         if ( id->driver_data == 365 || id->driver_data == 366) {
                 /* The 365/66 have two PATA channels, redirect the second */
                 pci_read_config_dword(pdev, 0x80, &reg);
@@ -229,6 +226,27 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int jmicron_reinit_one(struct pci_dev *pdev)
+{
+        u32 reg;
+        
+        switch(pdev->device) {
+                case PCI_DEVICE_ID_JMICRON_JMB368:
+                        break;
+                case PCI_DEVICE_ID_JMICRON_JMB365:
+                case PCI_DEVICE_ID_JMICRON_JMB366:
+                        /* Restore mapping or disks swap and boy does it get ugly */
+                        pci_read_config_dword(pdev, 0x80, &reg);
+                        reg |= (1 << 24);       /* IDE1 to PATA IDE secondary */
+                        pci_write_config_dword(pdev, 0x80, reg);
+                        /* Fall through */
+                default:
+                        /* Make sure AHCI is turned back on */
+                        pci_write_config_byte(pdev, 0x41, 0xa1);
+        }
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id jmicron_pci_tbl[] = {
         { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361},
         { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363},
@@ -244,6 +262,8 @@ static struct pci_driver jmicron_pci_driver = {
         .id_table               = jmicron_pci_tbl,
         .probe                  = jmicron_init_one,
         .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = jmicron_reinit_one,
 };
 
 static int __init jmicron_init(void)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index b39078b2a47b..c7d1738e4e69 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -128,7 +128,6 @@ static struct scsi_host_template legacy_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
new file mode 100644
index 000000000000..1c810ea00253
--- /dev/null
+++ b/drivers/ata/pata_marvell.c
@@ -0,0 +1,224 @@
+/*
+ *      Marvell PATA driver.
+ *
+ *      For the moment we drive the PATA port in legacy mode. That
+ *      isn't making full use of the device functionality but it is
+ *      easy to get working.
+ *
+ *      (c) 2006 Red Hat  <alan@redhat.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME        "pata_marvell"
+#define DRV_VERSION     "0.1.1"
+
+/**
+ *      marvell_pre_reset       -       check for 40/80 pin
+ *      @ap: Port
+ *
+ *      Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_port *ap)
+{
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        u32 devices;
+        void __iomem *barp;
+        int i;
+
+        /* Check if our port is enabled */
+
+        barp = pci_iomap(pdev, 5, 0x10);
+        if (barp == NULL)
+                return -ENOMEM;
+        printk("BAR5:");
+        for(i = 0; i <= 0x0F; i++)
+                printk("%02X:%02X ", i, readb(barp + i));
+        printk("\n");
+        
+        devices = readl(barp + 0x0C);
+        pci_iounmap(pdev, barp);
+        
+        if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
+            (!(devices & 0x10)))        /* PATA enable ? */
+                return -ENOENT;
+
+        /* Cable type */
+        switch(ap->port_no)
+        {
+        case 0:
+                if (inb(ap->ioaddr.bmdma_addr + 1) & 1)
+                        ap->cbl = ATA_CBL_PATA40;
+                else
+                        ap->cbl = ATA_CBL_PATA80;
+                break;
+
+        case 1: /* Legacy SATA port */
+                ap->cbl = ATA_CBL_SATA;
+                break;
+        }
+        return ata_std_prereset(ap);
+}
+
+/**
+ *      marvell_error_handler - Setup and error handler
+ *      @ap: Port to handle
+ *
+ *      LOCKING:
+ *      None (inherited from caller).
+ */
+
+static void marvell_error_handler(struct ata_port *ap)
+{
+        return ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset,
+                                  NULL, ata_std_postreset);
+}
+
+/* No PIO or DMA methods needed for this device */
+
+static struct scsi_host_template marvell_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+        .slave_destroy          = ata_scsi_slave_destroy,
+        /* Use standard CHS mapping rules */
+        .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
+};
+
+static const struct ata_port_operations marvell_ops = {
+        .port_disable           = ata_port_disable,
+
+        /* Task file is PCI ATA format, use helpers */
+        .tf_load                = ata_tf_load,
+        .tf_read                = ata_tf_read,
+        .check_status           = ata_check_status,
+        .exec_command           = ata_exec_command,
+        .dev_select             = ata_std_dev_select,
+
+        .freeze                 = ata_bmdma_freeze,
+        .thaw                   = ata_bmdma_thaw,
+        .error_handler          = marvell_error_handler,
+        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+
+        /* BMDMA handling is PCI ATA format, use helpers */
+        .bmdma_setup            = ata_bmdma_setup,
+        .bmdma_start            = ata_bmdma_start,
+        .bmdma_stop             = ata_bmdma_stop,
+        .bmdma_status           = ata_bmdma_status,
+        .qc_prep                = ata_qc_prep,
+        .qc_issue               = ata_qc_issue_prot,
+        .data_xfer              = ata_pio_data_xfer,
+
+        /* Timeout handling */
+        .irq_handler            = ata_interrupt,
+        .irq_clear              = ata_bmdma_irq_clear,
+
+        /* Generic PATA PCI ATA helpers */
+        .port_start             = ata_port_start,
+        .port_stop              = ata_port_stop,
+        .host_stop              = ata_host_stop,
+};
+
+
+/**
+ *      marvell_init_one - Register Marvell ATA PCI device with kernel services
+ *      @pdev: PCI device to register
+ *      @ent: Entry in marvell_pci_tbl matching with @pdev
+ *
+ *      Called from kernel PCI layer.
+ *
+ *      LOCKING:
+ *      Inherited from PCI layer (may sleep).
+ *
+ *      RETURNS:
+ *      Zero on success, or -ERRNO value.
+ */
+
+static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
+{
+        static struct ata_port_info info = {
+                .sht            = &marvell_sht,
+                .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+
+                .pio_mask       = 0x1f,
+                .mwdma_mask     = 0x07,
+                .udma_mask      = 0x3f,
+
+                .port_ops       = &marvell_ops,
+        };
+        static struct ata_port_info info_sata = {
+                .sht            = &marvell_sht,
+                /* Slave possible as its magically mapped not real */
+                .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+
+                .pio_mask       = 0x1f,
+                .mwdma_mask     = 0x07,
+                .udma_mask      = 0x7f,
+
+                .port_ops       = &marvell_ops,
+        };
+        struct ata_port_info *port_info[2] = { &info, &info_sata };
+        int n_port = 2;
+
+        if (pdev->device == 0x6101)
+                n_port = 1;
+
+        return ata_pci_init_one(pdev, port_info, n_port);
+}
+
+static const struct pci_device_id marvell_pci_tbl[] = {
+        { PCI_DEVICE(0x11AB, 0x6101), },
+        { PCI_DEVICE(0x11AB, 0x6145), },
+        { }     /* terminate list */
+};
+
+static struct pci_driver marvell_pci_driver = {
+        .name                   = DRV_NAME,
+        .id_table               = marvell_pci_tbl,
+        .probe                  = marvell_init_one,
+        .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = ata_pci_device_resume,
+};
+
+static int __init marvell_init(void)
+{
+        return pci_register_driver(&marvell_pci_driver);
+}
+
+static void __exit marvell_exit(void)
+{
+        pci_unregister_driver(&marvell_pci_driver);
+}
+
+module_init(marvell_init);
+module_exit(marvell_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for Marvell ATA in legacy mode");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, marvell_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index e00d406bfdf5..4ccca938675e 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
 
 enum {
         IDETIM = 0x6C,          /* IDE control register */
@@ -159,7 +159,6 @@ static struct scsi_host_template mpiix_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -168,6 +167,8 @@ static struct scsi_host_template mpiix_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations mpiix_port_ops = {
@@ -285,7 +286,9 @@ static struct pci_driver mpiix_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = mpiix,
         .probe          = mpiix_init_one,
-        .remove         = mpiix_remove_one
+        .remove         = mpiix_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init mpiix_init(void)
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 1963a4d35873..cf7fe037471c 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -16,7 +16,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_netcell"
-#define DRV_VERSION     "0.1.5"
+#define DRV_VERSION     "0.1.6"
 
 /**
  *      netcell_probe_init      -       check for 40/80 pin
@@ -54,8 +54,6 @@ static struct scsi_host_template netcell_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        /* Special handling needed if you have sector or LBA48 limits */
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -65,6 +63,8 @@ static struct scsi_host_template netcell_sht = {
         .slave_destroy          = ata_scsi_slave_destroy,
         /* Use standard CHS mapping rules */
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations netcell_ops = {
@@ -153,6 +153,8 @@ static struct pci_driver netcell_pci_driver = {
         .id_table               = netcell_pci_tbl,
         .probe                  = netcell_init_one,
         .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = ata_pci_device_resume,
 };
 
 static int __init netcell_init(void)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 7ec800f00ec8..c3032eb9010d 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -28,7 +28,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
 
 /**
  *      ns87410_pre_reset               -       probe begin
@@ -149,7 +149,6 @@ static struct scsi_host_template ns87410_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -158,6 +157,8 @@ static struct scsi_host_template ns87410_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations ns87410_port_ops = {
@@ -210,7 +211,9 @@ static struct pci_driver ns87410_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = ns87410,
         .probe          = ns87410_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init ns87410_init(void)
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 8837256632e9..10ac3cc10181 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -224,7 +224,6 @@ static struct scsi_host_template oldpiix_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -233,6 +232,8 @@ static struct scsi_host_template oldpiix_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations oldpiix_pata_ops = {
@@ -314,6 +315,8 @@ static struct pci_driver oldpiix_pci_driver = {
         .id_table               = oldpiix_pci_tbl,
         .probe                  = oldpiix_init_one,
         .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = ata_pci_device_resume,
 };
 
 static int __init oldpiix_init(void)
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c6319cf50de4..c2988b0aa8ea 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.2.7"
 
 enum {
         READ_REG        = 0,    /* index of Read cycle timing register */
@@ -109,30 +109,6 @@ static void opti_write_reg(struct ata_port *ap, u8 val, int reg)
         outb(0x83, regio + 2);
 }
 
-#if 0
-/**
- *      opti_read_reg           -       control register read
- *      @ap: ATA port
- *      @reg: control register number
- *
- *      The Opti uses magic 'trapdoor' register accesses to do configuration
- *      rather than using PCI space as other controllers do. The double inw
- *      on the error register activates configuration mode. We can then read
- *      the control register
- */
-
-static u8 opti_read_reg(struct ata_port *ap, int reg)
-{
-        unsigned long regio = ap->ioaddr.cmd_addr;
-        u8 ret;
-        inw(regio + 1);
-        inw(regio + 1);
-        outb(3, regio + 2);
-        ret = inb(regio + reg);
-        outb(0x83, regio + 2);
-}
-#endif
-
 /**
  *      opti_set_piomode        -       set initial PIO mode data
  *      @ap: ATA interface
@@ -195,7 +171,6 @@ static struct scsi_host_template opti_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -204,12 +179,13 @@ static struct scsi_host_template opti_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations opti_port_ops = {
         .port_disable   = ata_port_disable,
         .set_piomode    = opti_set_piomode,
-/*      .set_dmamode    = opti_set_dmamode, */
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
         .check_status   = ata_check_status,
@@ -267,7 +243,9 @@ static struct pci_driver opti_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = opti,
         .probe          = opti_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init opti_init(void)
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 2f4770cce04e..80d111c569dc 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
 
 enum {
         READ_REG        = 0,    /* index of Read cycle timing register */
@@ -352,7 +352,6 @@ static struct scsi_host_template optidma_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -361,6 +360,8 @@ static struct scsi_host_template optidma_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations optidma_port_ops = {
@@ -522,7 +523,9 @@ static struct pci_driver optidma_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = optidma,
         .probe          = optidma_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init optidma_init(void)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 999922de476e..4ca6fa5dcb42 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -62,7 +62,6 @@ static struct scsi_host_template pcmcia_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index beb6d10a234b..76dd1c935dbd 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -134,7 +134,6 @@ static struct scsi_host_template pdc2027x_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -854,7 +853,7 @@ static void __devexit pdc2027x_remove_one(struct pci_dev *pdev)
  */
 static int __init pdc2027x_init(void)
 {
-        return pci_module_init(&pdc2027x_pci_driver);
+        return pci_register_driver(&pdc2027x_pci_driver);
 }
 
 /**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 6baf51b2fda1..ad691b9e7743 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -21,7 +21,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.3"
 
 /**
  *      pdc2024x_pre_reset              -       probe begin
@@ -63,7 +63,7 @@ static void pdc2026x_error_handler(struct ata_port *ap)
 }
 
 /**
- *      pdc_configure_piomode   -       set chip PIO timing
+ *      pdc202xx_configure_piomode      -       set chip PIO timing
  *      @ap: ATA interface
  *      @adev: ATA device
  *      @pio: PIO mode
@@ -73,7 +73,7 @@ static void pdc2026x_error_handler(struct ata_port *ap)
  *      versa
  */
 
-static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
+static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
@@ -98,7 +98,7 @@ static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev,
 }
 
 /**
- *      pdc_set_piomode -       set initial PIO mode data
+ *      pdc202xx_set_piomode    -       set initial PIO mode data
  *      @ap: ATA interface
  *      @adev: ATA device
  *
@@ -106,13 +106,13 @@ static void pdc_configure_piomode(struct ata_port *ap, struct ata_device *adev,
  *      but we want to set the PIO timing by default.
  */
 
-static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
-        pdc_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
+        pdc202xx_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
 }
 
 /**
- *      pdc_configure_dmamode   -       set DMA mode in chip
+ *      pdc202xx_configure_dmamode      -       set DMA mode in chip
  *      @ap: ATA interface
  *      @adev: ATA device
  *
@@ -120,7 +120,7 @@ static void pdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *      to occur.
  */
 
-static void pdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         int port = 0x60 + 4 * ap->port_no + 2 * adev->devno;
@@ -184,7 +184,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
 
         /* The DMA clocks may have been trashed by a reset. FIXME: make conditional
            and move to qc_issue ? */
-        pdc_set_dmamode(ap, qc->dev);
+        pdc202xx_set_dmamode(ap, qc->dev);
 
         /* Cases the state machine will not complete correctly without help */
         if ((tf->flags & ATA_TFLAG_LBA48) ||  tf->protocol == ATA_PROT_ATAPI_DMA)
@@ -254,7 +254,7 @@ static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
         adev->max_sectors = 256;
 }
 
-static struct scsi_host_template pdc_sht = {
+static struct scsi_host_template pdc202xx_sht = {
         .module                 = THIS_MODULE,
         .name                   = DRV_NAME,
         .ioctl                  = ata_scsi_ioctl,
@@ -262,7 +262,6 @@ static struct scsi_host_template pdc_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -271,12 +270,14 @@ static struct scsi_host_template pdc_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations pdc2024x_port_ops = {
         .port_disable   = ata_port_disable,
-        .set_piomode    = pdc_set_piomode,
-        .set_dmamode    = pdc_set_dmamode,
+        .set_piomode    = pdc202xx_set_piomode,
+        .set_dmamode    = pdc202xx_set_dmamode,
         .mode_filter    = ata_pci_default_filter,
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
@@ -308,8 +309,8 @@ static struct ata_port_operations pdc2024x_port_ops = {
 
 static struct ata_port_operations pdc2026x_port_ops = {
         .port_disable   = ata_port_disable,
-        .set_piomode    = pdc_set_piomode,
-        .set_dmamode    = pdc_set_dmamode,
+        .set_piomode    = pdc202xx_set_piomode,
+        .set_dmamode    = pdc202xx_set_dmamode,
         .mode_filter    = ata_pci_default_filter,
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
@@ -340,11 +341,11 @@ static struct ata_port_operations pdc2026x_port_ops = {
         .host_stop      = ata_host_stop
 };
 
-static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
         static struct ata_port_info info[3] = {
                 {
-                        .sht = &pdc_sht,
+                        .sht = &pdc202xx_sht,
                         .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
                         .pio_mask = 0x1f,
                         .mwdma_mask = 0x07,
@@ -352,7 +353,7 @@ static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         .port_ops = &pdc2024x_port_ops
                 },
                 {
-                        .sht = &pdc_sht,
+                        .sht = &pdc202xx_sht,
                         .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
                         .pio_mask = 0x1f,
                         .mwdma_mask = 0x07,
@@ -360,7 +361,7 @@ static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                         .port_ops = &pdc2026x_port_ops
                 },
                 {
-                        .sht = &pdc_sht,
+                        .sht = &pdc202xx_sht,
                         .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
                         .pio_mask = 0x1f,
                         .mwdma_mask = 0x07,
@@ -386,7 +387,7 @@ static int pdc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         return ata_pci_init_one(dev, port_info, 2);
 }
 
-static const struct pci_device_id pdc[] = {
+static const struct pci_device_id pdc202xx[] = {
         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
@@ -396,28 +397,30 @@ static const struct pci_device_id pdc[] = {
         { },
 };
 
-static struct pci_driver pdc_pci_driver = {
+static struct pci_driver pdc202xx_pci_driver = {
         .name           = DRV_NAME,
-        .id_table       = pdc,
-        .probe          = pdc_init_one,
-        .remove         = ata_pci_remove_one
+        .id_table       = pdc202xx,
+        .probe          = pdc202xx_init_one,
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
-static int __init pdc_init(void)
+static int __init pdc202xx_init(void)
 {
-        return pci_register_driver(&pdc_pci_driver);
+        return pci_register_driver(&pdc202xx_pci_driver);
 }
 
-static void __exit pdc_exit(void)
+static void __exit pdc202xx_exit(void)
 {
-        pci_unregister_driver(&pdc_pci_driver);
+        pci_unregister_driver(&pdc202xx_pci_driver);
 }
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
 MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, pdc);
+MODULE_DEVICE_TABLE(pci, pdc202xx);
 MODULE_VERSION(DRV_VERSION);
 
-module_init(pdc_init);
-module_exit(pdc_exit);
+module_init(pdc202xx_init);
+module_exit(pdc202xx_exit);
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
new file mode 100644
index 000000000000..443b1d85c6c4
--- /dev/null
+++ b/drivers/ata/pata_platform.c
@@ -0,0 +1,295 @@
+/*
+ * Generic platform device PATA driver
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * Based on pata_pcmcia:
+ *
+ *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+
+#define DRV_NAME "pata_platform"
+#define DRV_VERSION "0.1.2"
+
+static int pio_mask = 1;
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static void pata_platform_set_mode(struct ata_port *ap)
+{
+        int i;
+
+        for (i = 0; i < ATA_MAX_DEVICES; i++) {
+                struct ata_device *dev = &ap->device[i];
+
+                if (ata_dev_enabled(dev)) {
+                        /* We don't really care */
+                        dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+                        dev->xfer_shift = ATA_SHIFT_PIO;
+                        dev->flags |= ATA_DFLAG_PIO;
+                }
+        }
+}
+
+static void pata_platform_host_stop(struct ata_host *host)
+{
+        int i;
+
+        /*
+         * Unmap the bases for MMIO
+         */
+        for (i = 0; i < host->n_ports; i++) {
+                struct ata_port *ap = host->ports[i];
+
+                if (ap->flags & ATA_FLAG_MMIO) {
+                        iounmap((void __iomem *)ap->ioaddr.ctl_addr);
+                        iounmap((void __iomem *)ap->ioaddr.cmd_addr);
+                }
+        }
+}
+
+static struct scsi_host_template pata_platform_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+        .slave_destroy          = ata_scsi_slave_destroy,
+        .bios_param             = ata_std_bios_param,
+};
+
+static struct ata_port_operations pata_platform_port_ops = {
+        .set_mode               = pata_platform_set_mode,
+
+        .port_disable           = ata_port_disable,
+        .tf_load                = ata_tf_load,
+        .tf_read                = ata_tf_read,
+        .check_status           = ata_check_status,
+        .exec_command           = ata_exec_command,
+        .dev_select             = ata_std_dev_select,
+
+        .freeze                 = ata_bmdma_freeze,
+        .thaw                   = ata_bmdma_thaw,
+        .error_handler          = ata_bmdma_error_handler,
+        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+
+        .qc_prep                = ata_qc_prep,
+        .qc_issue               = ata_qc_issue_prot,
+
+        .data_xfer              = ata_pio_data_xfer_noirq,
+
+        .irq_handler            = ata_interrupt,
+        .irq_clear              = ata_bmdma_irq_clear,
+
+        .port_start             = ata_port_start,
+        .port_stop              = ata_port_stop,
+        .host_stop              = pata_platform_host_stop
+};
+
+static void pata_platform_setup_port(struct ata_ioports *ioaddr,
+                                     struct pata_platform_info *info)
+{
+        unsigned int shift = 0;
+
+        /* Fixup the port shift for platforms that need it */
+        if (info && info->ioport_shift)
+                shift = info->ioport_shift;
+
+        ioaddr->data_addr       = ioaddr->cmd_addr + (ATA_REG_DATA    << shift);
+        ioaddr->error_addr      = ioaddr->cmd_addr + (ATA_REG_ERR     << shift);
+        ioaddr->feature_addr    = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
+        ioaddr->nsect_addr      = ioaddr->cmd_addr + (ATA_REG_NSECT   << shift);
+        ioaddr->lbal_addr       = ioaddr->cmd_addr + (ATA_REG_LBAL    << shift);
+        ioaddr->lbam_addr       = ioaddr->cmd_addr + (ATA_REG_LBAM    << shift);
+        ioaddr->lbah_addr       = ioaddr->cmd_addr + (ATA_REG_LBAH    << shift);
+        ioaddr->device_addr     = ioaddr->cmd_addr + (ATA_REG_DEVICE  << shift);
+        ioaddr->status_addr     = ioaddr->cmd_addr + (ATA_REG_STATUS  << shift);
+        ioaddr->command_addr    = ioaddr->cmd_addr + (ATA_REG_CMD     << shift);
+}
+
+/**
+ *      pata_platform_probe             -       attach a platform interface
+ *      @pdev: platform device
+ *
+ *      Register a platform bus IDE interface. Such interfaces are PIO and we
+ *      assume do not support IRQ sharing.
+ *
+ *      Platform devices are expected to contain 3 resources per port:
+ *
+ *              - I/O Base (IORESOURCE_IO or IORESOURCE_MEM)
+ *              - CTL Base (IORESOURCE_IO or IORESOURCE_MEM)
+ *              - IRQ      (IORESOURCE_IRQ)
+ *
+ *      If the base resources are both mem types, the ioremap() is handled
+ *      here. For IORESOURCE_IO, it's assumed that there's no remapping
+ *      necessary.
+ */
+static int __devinit pata_platform_probe(struct platform_device *pdev)
+{
+        struct resource *io_res, *ctl_res;
+        struct ata_probe_ent ae;
+        unsigned int mmio;
+        int ret;
+
+        /*
+         * Simple resource validation ..
+         */
+        if (unlikely(pdev->num_resources != 3)) {
+                dev_err(&pdev->dev, "invalid number of resources\n");
+                return -EINVAL;
+        }
+
+        /*
+         * Get the I/O base first
+         */
+        io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+        if (io_res == NULL) {
+                io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+                if (unlikely(io_res == NULL))
+                        return -EINVAL;
+        }
+
+        /*
+         * Then the CTL base
+         */
+        ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+        if (ctl_res == NULL) {
+                ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+                if (unlikely(ctl_res == NULL))
+                        return -EINVAL;
+        }
+
+        /*
+         * Check for MMIO
+         */
+        mmio = (( io_res->flags == IORESOURCE_MEM) &&
+                (ctl_res->flags == IORESOURCE_MEM));
+
+        /*
+         * Now that that's out of the way, wire up the port..
+         */
+        memset(&ae, 0, sizeof(struct ata_probe_ent));
+        INIT_LIST_HEAD(&ae.node);
+        ae.dev = &pdev->dev;
+        ae.port_ops = &pata_platform_port_ops;
+        ae.sht = &pata_platform_sht;
+        ae.n_ports = 1;
+        ae.pio_mask = pio_mask;
+        ae.irq = platform_get_irq(pdev, 0);
+        ae.irq_flags = 0;
+        ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+
+        /*
+         * Handle the MMIO case
+         */
+        if (mmio) {
+                ae.port_flags |= ATA_FLAG_MMIO;
+
+                ae.port[0].cmd_addr = (unsigned long)ioremap(io_res->start,
+                                io_res->end - io_res->start + 1);
+                if (unlikely(!ae.port[0].cmd_addr)) {
+                        dev_err(&pdev->dev, "failed to remap IO base\n");
+                        return -ENXIO;
+                }
+
+                ae.port[0].ctl_addr = (unsigned long)ioremap(ctl_res->start,
+                                ctl_res->end - ctl_res->start + 1);
+                if (unlikely(!ae.port[0].ctl_addr)) {
+                        dev_err(&pdev->dev, "failed to remap CTL base\n");
+                        ret = -ENXIO;
+                        goto bad_remap;
+                }
+        } else {
+                ae.port[0].cmd_addr = io_res->start;
+                ae.port[0].ctl_addr = ctl_res->start;
+        }
+
+        ae.port[0].altstatus_addr = ae.port[0].ctl_addr;
+
+        pata_platform_setup_port(&ae.port[0], pdev->dev.platform_data);
+
+        if (unlikely(ata_device_add(&ae) == 0)) {
+                ret = -ENODEV;
+                goto add_failed;
+        }
+
+        return 0;
+
+add_failed:
+        if (ae.port[0].ctl_addr && mmio)
+                iounmap((void __iomem *)ae.port[0].ctl_addr);
+bad_remap:
+        if (ae.port[0].cmd_addr && mmio)
+                iounmap((void __iomem *)ae.port[0].cmd_addr);
+
+        return ret;
+}
+
+/**
+ *      pata_platform_remove    -       unplug a platform interface
+ *      @pdev: platform device
+ *
+ *      A platform bus ATA device has been unplugged. Perform the needed
+ *      cleanup. Also called on module unload for any active devices.
+ */
+static int __devexit pata_platform_remove(struct platform_device *pdev)
+{
+        struct device *dev = &pdev->dev;
+        struct ata_host *host = dev_get_drvdata(dev);
+
+        ata_host_remove(host);
+        dev_set_drvdata(dev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver pata_platform_driver = {
+        .probe          = pata_platform_probe,
+        .remove         = __devexit_p(pata_platform_remove),
+        .driver = {
+                .name           = DRV_NAME,
+                .owner          = THIS_MODULE,
+        },
+};
+
+static int __init pata_platform_init(void)
+{
+        return platform_driver_register(&pata_platform_driver);
+}
+
+static void __exit pata_platform_exit(void)
+{
+        platform_driver_unregister(&pata_platform_driver);
+}
+module_init(pata_platform_init);
+module_exit(pata_platform_exit);
+
+module_param(pio_mask, int, 0);
+
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("low-level driver for platform device ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 314938dea1fc..36f621abc390 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -157,7 +157,6 @@ static struct scsi_host_template qdi_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 048c2bb21ef1..065541d034ad 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -220,7 +220,6 @@ static struct scsi_host_template radisys_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -229,6 +228,8 @@ static struct scsi_host_template radisys_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations radisys_pata_ops = {
@@ -311,6 +312,8 @@ static struct pci_driver radisys_pci_driver = {
         .id_table               = radisys_pci_tbl,
         .probe                  = radisys_init_one,
         .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = ata_pci_device_resume,
 };
 
 static int __init radisys_init(void)
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index e4e5ea423fef..3677c642c9f9 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -21,7 +21,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_rz1000"
-#define DRV_VERSION     "0.2.2"
+#define DRV_VERSION     "0.2.3"
 
 
 /**
@@ -83,7 +83,6 @@ static struct scsi_host_template rz1000_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -92,6 +91,8 @@ static struct scsi_host_template rz1000_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations rz1000_port_ops = {
@@ -129,6 +130,19 @@ static struct ata_port_operations rz1000_port_ops = {
         .host_stop      = ata_host_stop
 };
 
+static int rz1000_fifo_disable(struct pci_dev *pdev)
+{
+        u16 reg;
+        /* Be exceptionally paranoid as we must be sure to apply the fix */
+        if (pci_read_config_word(pdev, 0x40, &reg) != 0)
+                return -1;
+        reg &= 0xDFFF;
+        if (pci_write_config_word(pdev, 0x40, reg) != 0)
+                return -1;
+        printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
+        return 0;
+}
+
 /**
  *      rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
  *      @pdev: PCI device to register
@@ -143,7 +157,6 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 {
         static int printed_version;
         struct ata_port_info *port_info[2];
-        u16 reg;
         static struct ata_port_info info = {
                 .sht = &rz1000_sht,
                 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -154,23 +167,25 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
         if (!printed_version++)
                 printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
 
-        /* Be exceptionally paranoid as we must be sure to apply the fix */
-        if (pci_read_config_word(pdev, 0x40, &reg) != 0)
-                goto fail;
-        reg &= 0xDFFF;
-        if (pci_write_config_word(pdev, 0x40, reg) != 0)
-                goto fail;
-        printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
-
-        port_info[0] = &info;
-        port_info[1] = &info;
-        return ata_pci_init_one(pdev, port_info, 2);
-fail:
+        if (rz1000_fifo_disable(pdev) == 0) {
+                port_info[0] = &info;
+                port_info[1] = &info;
+                return ata_pci_init_one(pdev, port_info, 2);
+        }
         printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
         /* Not safe to use so skip */
         return -ENODEV;
 }
 
+static int rz1000_reinit_one(struct pci_dev *pdev)
+{
+        /* If this fails on resume (which is a "cant happen" case), we
+           must stop as any progress risks data loss */
+        if (rz1000_fifo_disable(pdev))
+                panic("rz1000 fifo");
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id pata_rz1000[] = {
         { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
         { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
@@ -182,7 +197,9 @@ static struct pci_driver rz1000_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = pata_rz1000,
         .probe          = rz1000_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = rz1000_reinit_one,
 };
 
 static int __init rz1000_init(void)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 0c75dae74764..a3b35bc50394 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -40,7 +40,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "sc1200"
-#define DRV_VERSION     "0.2.3"
+#define DRV_VERSION     "0.2.4"
 
 #define SC1200_REV_A    0x00
 #define SC1200_REV_B1   0x01
@@ -186,7 +186,6 @@ static struct scsi_host_template sc1200_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -195,6 +194,8 @@ static struct scsi_host_template sc1200_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations sc1200_port_ops = {
@@ -264,7 +265,9 @@ static struct pci_driver sc1200_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = sc1200,
         .probe          = sc1200_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init sc1200_init(void)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index be7f60efcb61..f02b6a3b0f10 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.7"
+#define DRV_VERSION "0.3.9"
 
 #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION     0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
@@ -318,7 +318,6 @@ static struct scsi_host_template serverworks_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -327,6 +326,8 @@ static struct scsi_host_template serverworks_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations serverworks_osb4_port_ops = {
@@ -554,6 +555,30 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
         return ata_pci_init_one(pdev, port_info, ports);
 }
 
+static int serverworks_reinit_one(struct pci_dev *pdev)
+{
+        /* Force master latency timer to 64 PCI clocks */
+        pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+        
+        switch (pdev->device)
+        {
+                case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
+                        serverworks_fixup_osb4(pdev);
+                        break;
+                case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+                        ata_pci_clear_simplex(pdev);
+                        /* fall through */
+                case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+                case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+                        serverworks_fixup_csb(pdev);
+                        break;
+                case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+                        serverworks_fixup_ht1000(pdev);
+                        break;
+        }
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id serverworks[] = {
         { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
         { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2},
@@ -568,7 +593,9 @@ static struct pci_driver serverworks_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = serverworks,
         .probe          = serverworks_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = serverworks_reinit_one,
 };
 
 static int __init serverworks_init(void)
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 11942fd03b55..32cf0bfa8921 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.4.1"
 
 /**
  *      sil680_selreg           -       return register base
@@ -218,7 +218,6 @@ static struct scsi_host_template sil680_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -263,32 +262,20 @@ static struct ata_port_operations sil680_port_ops = {
         .host_stop      = ata_host_stop
 };
 
-static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+/**
+ *      sil680_init_chip                -       chip setup
+ *      @pdev: PCI device
+ *
+ *      Perform all the chip setup which must be done both when the device
+ *      is powered up on boot and when we resume in case we resumed from RAM.
+ *      Returns the final clock settings.
+ */
+ 
+static u8 sil680_init_chip(struct pci_dev *pdev)
 {
-        static struct ata_port_info info = {
-                .sht = &sil680_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-                .pio_mask = 0x1f,
-                .mwdma_mask = 0x07,
-                .udma_mask = 0x7f,
-                .port_ops = &sil680_port_ops
-        };
-        static struct ata_port_info info_slow = {
-                .sht = &sil680_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-                .pio_mask = 0x1f,
-                .mwdma_mask = 0x07,
-                .udma_mask = 0x3f,
-                .port_ops = &sil680_port_ops
-        };
-        static struct ata_port_info *port_info[2] = {&info, &info};
-        static int printed_version;
         u32 class_rev   = 0;
         u8 tmpbyte      = 0;
 
-        if (!printed_version++)
-                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
         pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xff;
         /* FIXME: double check */
@@ -323,8 +310,6 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         pci_read_config_byte(pdev,   0x8A, &tmpbyte);
         printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
                         tmpbyte & 1, tmpbyte & 0x30);
-        if ((tmpbyte & 0x30) == 0)
-                port_info[0] = port_info[1] = &info_slow;
 
         pci_write_config_byte(pdev,  0xA1, 0x72);
         pci_write_config_word(pdev,  0xA2, 0x328A);
@@ -343,11 +328,51 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
                 case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
                 /* This last case is _NOT_ ok */
                 case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
-                        return -EIO;
+        }
+        return tmpbyte & 0x30;
+}
+
+static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+        static struct ata_port_info info = {
+                .sht = &sil680_sht,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .pio_mask = 0x1f,
+                .mwdma_mask = 0x07,
+                .udma_mask = 0x7f,
+                .port_ops = &sil680_port_ops
+        };
+        static struct ata_port_info info_slow = {
+                .sht = &sil680_sht,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .pio_mask = 0x1f,
+                .mwdma_mask = 0x07,
+                .udma_mask = 0x3f,
+                .port_ops = &sil680_port_ops
+        };
+        static struct ata_port_info *port_info[2] = {&info, &info};
+        static int printed_version;
+
+        if (!printed_version++)
+                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+        switch(sil680_init_chip(pdev))
+        {
+                case 0:
+                        port_info[0] = port_info[1] = &info_slow;
+                        break;
+                case 0x30:
+                        return -ENODEV;
         }
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+static int sil680_reinit_one(struct pci_dev *pdev)
+{
+        sil680_init_chip(pdev);
+        return ata_pci_device_resume(pdev);
+}
+
 static const struct pci_device_id sil680[] = {
         { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
 
@@ -358,7 +383,9 @@ static struct pci_driver sil680_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = sil680,
         .probe          = sil680_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = sil680_reinit_one,
 };
 
 static int __init sil680_init(void)
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 91e85f90941d..916cedb3d755 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -34,7 +34,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME        "pata_sis"
-#define DRV_VERSION     "0.4.4"
+#define DRV_VERSION     "0.4.5"
 
 struct sis_chipset {
         u16 device;                     /* PCI host ID */
@@ -538,7 +538,6 @@ static struct scsi_host_template sis_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -547,6 +546,8 @@ static struct scsi_host_template sis_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static const struct ata_port_operations sis_133_ops = {
@@ -1000,6 +1001,8 @@ static struct pci_driver sis_pci_driver = {
         .id_table               = sis_pci_tbl,
         .probe                  = sis_init_one,
         .remove                 = ata_pci_remove_one,
+        .suspend                = ata_pci_device_suspend,
+        .resume                 = ata_pci_device_resume,
 };
 
 static int __init sis_init(void)
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index dc1cfc6d805b..e94f515ef54b 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -230,7 +230,6 @@ static struct scsi_host_template sl82c105_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index bfda1f7e760a..a142971f1307 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_triflex"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.2.7"
 
 /**
  *      triflex_prereset                -       probe begin
@@ -185,7 +185,6 @@ static struct scsi_host_template triflex_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -194,6 +193,8 @@ static struct scsi_host_template triflex_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations triflex_port_ops = {
@@ -258,7 +259,9 @@ static struct pci_driver triflex_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = triflex,
         .probe          = triflex_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = ata_pci_device_resume,
 };
 
 static int __init triflex_init(void)
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index c5f1616d224d..cc09d47fb927 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -23,6 +23,7 @@
  *      VIA VT8233c     -       UDMA100
  *      VIA VT8235      -       UDMA133
  *      VIA VT8237      -       UDMA133
+ *      VIA VT8251      -       UDMA133
  *
  *      Most registers remain compatible across chips. Others start reserved
  *      and acquire sensible semantics if set to 1 (eg cable detect). A few
@@ -60,7 +61,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.1.14"
+#define DRV_VERSION "0.2.0"
 
 /*
  *      The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -94,6 +95,7 @@ static const struct via_isa_bridge {
         u8 rev_max;
         u16 flags;
 } via_isa_bridges[] = {
+        { "vt8251",     PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
         { "cx700",      PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
         { "vt6410",     PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
         { "vt8237a",    PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -288,7 +290,6 @@ static struct scsi_host_template via_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -297,6 +298,8 @@ static struct scsi_host_template via_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations via_port_ops = {
@@ -370,8 +373,42 @@ static struct ata_port_operations via_port_ops_noirq = {
 };
 
 /**
+ *      via_config_fifo         -       set up the FIFO
+ *      @pdev: PCI device
+ *      @flags: configuration flags
+ *
+ *      Set the FIFO properties for this device if neccessary. Used both on
+ *      set up and on and the resume path
+ */
+
+static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
+{
+        u8 enable;
+        
+        /* 0x40 low bits indicate enabled channels */
+        pci_read_config_byte(pdev, 0x40 , &enable);
+        enable &= 3;
+        
+        if (flags & VIA_SET_FIFO) {
+                u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
+                u8 fifo;
+
+                pci_read_config_byte(pdev, 0x43, &fifo);
+
+                /* Clear PREQ# until DDACK# for errata */
+                if (flags & VIA_BAD_PREQ)
+                        fifo &= 0x7F;
+                else
+                        fifo &= 0x9f;
+                /* Turn on FIFO for enabled channels */
+                fifo |= fifo_setting[enable];
+                pci_write_config_byte(pdev, 0x43, fifo);
+        }
+}
+
+/**
  *      via_init_one            -       discovery callback
- *      @pdev: PCI device ID
+ *      @pdev: PCI device
  *      @id: PCI table info
  *
  *      A VIA IDE interface has been discovered. Figure out what revision
@@ -383,7 +420,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* Early VIA without UDMA support */
         static struct ata_port_info via_mwdma_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .port_ops = &via_port_ops
@@ -391,7 +428,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* Ditto with IRQ masking required */
         static struct ata_port_info via_mwdma_info_borked = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .port_ops = &via_port_ops_noirq,
@@ -399,7 +436,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* VIA UDMA 33 devices (and borked 66) */
         static struct ata_port_info via_udma33_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x7,
@@ -408,7 +445,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* VIA UDMA 66 devices */
         static struct ata_port_info via_udma66_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x1f,
@@ -417,7 +454,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* VIA UDMA 100 devices */
         static struct ata_port_info via_udma100_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x3f,
@@ -426,7 +463,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* UDMA133 with bad AST (All current 133) */
         static struct ata_port_info via_udma133_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x7f,      /* FIXME: should check north bridge */
@@ -471,21 +508,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         }
 
         /* Initialise the FIFO for the enabled channels. */
-        if (config->flags & VIA_SET_FIFO) {
-                u8 fifo_setting[4] = {0x00, 0x60, 0x00, 0x20};
-                u8 fifo;
-
-                pci_read_config_byte(pdev, 0x43, &fifo);
-
-                /* Clear PREQ# until DDACK# for errata */
-                if (config->flags & VIA_BAD_PREQ)
-                        fifo &= 0x7F;
-                else
-                        fifo &= 0x9f;
-                /* Turn on FIFO for enabled channels */
-                fifo |= fifo_setting[enable];
-                pci_write_config_byte(pdev, 0x43, fifo);
-        }
+        via_config_fifo(pdev, config->flags);
+        
         /* Clock set up */
         switch(config->flags & VIA_UDMA) {
                 case VIA_UDMA_NONE:
@@ -529,6 +553,39 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         return ata_pci_init_one(pdev, port_info, 2);
 }
 
+/**
+ *      via_reinit_one          -       reinit after resume
+ *      @pdev; PCI device
+ *
+ *      Called when the VIA PATA device is resumed. We must then
+ *      reconfigure the fifo and other setup we may have altered. In
+ *      addition the kernel needs to have the resume methods on PCI
+ *      quirk supported.
+ */
+
+static int via_reinit_one(struct pci_dev *pdev)
+{
+        u32 timing;
+        struct ata_host *host = dev_get_drvdata(&pdev->dev);
+        const struct via_isa_bridge *config = host->private_data;
+        
+        via_config_fifo(pdev, config->flags);
+
+        if ((config->flags & VIA_UDMA) == VIA_UDMA_66) {
+                /* The 66 MHz devices require we enable the clock */
+                pci_read_config_dword(pdev, 0x50, &timing);
+                timing |= 0x80008;
+                pci_write_config_dword(pdev, 0x50, timing);
+        }
+        if (config->flags & VIA_BAD_CLK66) {
+                /* Disable the 66MHz clock on problem devices */
+                pci_read_config_dword(pdev, 0x50, &timing);
+                timing &= ~0x80008;
+                pci_write_config_dword(pdev, 0x50, timing);
+        }
+        return ata_pci_device_resume(pdev);     
+}
+
 static const struct pci_device_id via[] = {
         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), },
         { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), },
@@ -542,7 +599,9 @@ static struct pci_driver via_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = via,
         .probe          = via_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = via_reinit_one,
 };
 
 static int __init via_init(void)
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
new file mode 100644
index 000000000000..3ea345cde52e
--- /dev/null
+++ b/drivers/ata/pata_winbond.c
@@ -0,0 +1,306 @@
+/*
+ *    pata_winbond.c - Winbond VLB ATA controllers
+ *      (C) 2006 Red Hat <alan@redhat.com>
+ *
+ *    Support for the Winbond 83759A when operating in advanced mode.
+ *    Multichip mode is not currently supported.
+ */
+ 
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "pata_winbond"
+#define DRV_VERSION "0.0.1"
+
+#define NR_HOST 4       /* Two winbond controllers, two channels each */
+
+struct winbond_data {
+        unsigned long config;
+        struct platform_device *platform_dev;
+};
+
+static struct ata_host *winbond_host[NR_HOST];
+static struct winbond_data winbond_data[NR_HOST];
+static int nr_winbond_host;
+
+#ifdef MODULE
+static int probe_winbond = 1;
+#else
+static int probe_winbond;
+#endif
+
+static spinlock_t winbond_lock = SPIN_LOCK_UNLOCKED;
+
+static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&winbond_lock, flags);
+        outb(reg, port + 0x01);
+        outb(val, port + 0x02);
+        spin_unlock_irqrestore(&winbond_lock, flags);
+}
+
+static u8 winbond_readcfg(unsigned long port, u8 reg)
+{
+        u8 val;
+
+        unsigned long flags;
+        spin_lock_irqsave(&winbond_lock, flags);
+        outb(reg, port + 0x01);
+        val = inb(port + 0x02);
+        spin_unlock_irqrestore(&winbond_lock, flags);
+
+        return val;
+}
+
+static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+        struct ata_timing t;
+        struct winbond_data *winbond = ap->host->private_data;
+        int active, recovery;
+        u8 reg;
+        int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
+
+        reg = winbond_readcfg(winbond->config, 0x81);
+        
+        /* Get the timing data in cycles */
+        if (reg & 0x40)         /* Fast VLB bus, assume 50MHz */
+                ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+        else
+                ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+        active = (FIT(t.active, 3, 17) - 1) & 0x0F;
+        recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+        timing = (active << 4) | recovery;
+        winbond_writecfg(winbond->config, timing, reg);
+        
+        /* Load the setup timing */
+        
+        reg = 0x35;
+        if (adev->class != ATA_DEV_ATA)
+                reg |= 0x08;    /* FIFO off */
+        if (!ata_pio_need_iordy(adev))
+                reg |= 0x02;    /* IORDY off */
+        reg |= (FIT(t.setup, 0, 3) << 6);
+        winbond_writecfg(winbond->config, timing + 1, reg);
+}
+
+
+static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+{
+        struct ata_port *ap = adev->ap;
+        int slop = buflen & 3;
+
+        if (ata_id_has_dword_io(adev->id)) {
+                if (write_data)
+                        outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
+                else
+                        insl(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+                if (unlikely(slop)) {
+                        u32 pad;
+                        if (write_data) {
+                                memcpy(&pad, buf + buflen - slop, slop);
+                                outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
+                        } else {
+                                pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
+                                memcpy(buf + buflen - slop, &pad, slop);
+                        }
+                }
+        } else
+                ata_pio_data_xfer(adev, buf, buflen, write_data);
+}
+
+static struct scsi_host_template winbond_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+        .slave_destroy          = ata_scsi_slave_destroy,
+        .bios_param             = ata_std_bios_param,
+};
+
+static struct ata_port_operations winbond_port_ops = {
+        .port_disable   = ata_port_disable,
+        .set_piomode    = winbond_set_piomode,
+
+        .tf_load        = ata_tf_load,
+        .tf_read        = ata_tf_read,
+        .check_status   = ata_check_status,
+        .exec_command   = ata_exec_command,
+        .dev_select     = ata_std_dev_select,
+
+        .freeze         = ata_bmdma_freeze,
+        .thaw           = ata_bmdma_thaw,
+        .error_handler  = ata_bmdma_error_handler,
+        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+        .qc_prep        = ata_qc_prep,
+        .qc_issue       = ata_qc_issue_prot,
+
+        .data_xfer      = winbond_data_xfer,
+
+        .irq_handler    = ata_interrupt,
+        .irq_clear      = ata_bmdma_irq_clear,
+
+        .port_start     = ata_port_start,
+        .port_stop      = ata_port_stop,
+        .host_stop      = ata_host_stop
+};
+
+/**
+ *      winbond_init_one                -       attach a winbond interface
+ *      @type: Type to display
+ *      @io: I/O port start
+ *      @irq: interrupt line
+ *      @fast: True if on a > 33Mhz VLB
+ *
+ *      Register a VLB bus IDE interface. Such interfaces are PIO and we
+ *      assume do not support IRQ sharing.
+ */
+
+static __init int winbond_init_one(unsigned long port)
+{
+        struct ata_probe_ent ae;
+        struct platform_device *pdev;
+        int ret;
+        u8 reg;
+        int i;
+
+        reg = winbond_readcfg(port, 0x81);
+        reg |= 0x80;    /* jumpered mode off */
+        winbond_writecfg(port, 0x81, reg);
+        reg = winbond_readcfg(port, 0x83);
+        reg |= 0xF0;    /* local control */
+        winbond_writecfg(port, 0x83, reg);
+        reg = winbond_readcfg(port, 0x85);
+        reg |= 0xF0;    /* programmable timing */
+        winbond_writecfg(port, 0x85, reg);
+
+        reg = winbond_readcfg(port, 0x81);
+        
+        if (!(reg & 0x03))              /* Disabled */
+                return 0;
+
+        for (i = 0; i < 2 ; i ++) {
+
+                if (reg & (1 << i)) {           
+                        /*
+                         *      Fill in a probe structure first of all
+                         */
+
+                        pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
+                        if (pdev == NULL)
+                                return -ENOMEM;
+
+                        memset(&ae, 0, sizeof(struct ata_probe_ent));
+                        INIT_LIST_HEAD(&ae.node);
+                        ae.dev = &pdev->dev;
+
+                        ae.port_ops = &winbond_port_ops;
+                        ae.pio_mask = 0x1F;
+
+                        ae.sht = &winbond_sht;
+        
+                        ae.n_ports = 1;
+                        ae.irq = 14 + i;
+                        ae.irq_flags = 0;
+                        ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+                        ae.port[0].cmd_addr = 0x1F0 - (0x80 * i);
+                        ae.port[0].altstatus_addr = ae.port[0].cmd_addr + 0x0206;
+                        ae.port[0].ctl_addr = ae.port[0].altstatus_addr;
+                        ata_std_ports(&ae.port[0]);
+                        /*
+                         *      Hook in a private data structure per channel
+                         */
+                        ae.private_data = &winbond_data[nr_winbond_host];
+                        winbond_data[nr_winbond_host].config = port;
+                        winbond_data[nr_winbond_host].platform_dev = pdev;
+
+                        ret = ata_device_add(&ae);
+                        if (ret == 0) {
+                                platform_device_unregister(pdev);
+                                return -ENODEV;
+                        }
+                        winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
+                }
+        }
+
+        return 0;
+}
+
+/**
+ *      winbond_init            -       attach winbond interfaces
+ *
+ *      Attach winbond IDE interfaces by scanning the ports it may occupy.
+ */
+
+static __init int winbond_init(void)
+{
+        static const unsigned long config[2] = { 0x130, 0x1B0 };
+
+        int ct = 0;
+        int i;
+        
+        if (probe_winbond == 0)
+                return -ENODEV;
+
+        /*
+         *      Check both base addresses
+         */
+
+        for (i = 0; i < 2; i++) {
+                if (probe_winbond & (1<<i)) {
+                        int ret = 0;
+                        unsigned long port = config[i];
+
+                        if (request_region(port, 2, "pata_winbond")) {
+                                ret = winbond_init_one(port);
+                                if(ret <= 0)
+                                        release_region(port, 2);
+                                else ct+= ret;
+                        }
+                }
+        }
+        if (ct != 0)
+                return 0;
+        return -ENODEV;
+}
+
+static __exit void winbond_exit(void)
+{
+        int i;
+
+        for (i = 0; i < nr_winbond_host; i++) {
+                ata_host_remove(winbond_host[i]);
+                release_region(winbond_data[i].config, 2);
+                platform_device_unregister(winbond_data[i].platform_dev);
+        }
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(winbond_init);
+module_exit(winbond_exit);
+
+module_param(probe_winbond, int, 0);
+
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index d65ebfd7c7b2..0d316eb3c214 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -29,6 +29,11 @@
  *  NV-specific details such as register offsets, SATA phy location,
  *  hotplug info, etc.
  *
+ *  CK804/MCP04 controllers support an alternate programming interface
+ *  similar to the ADMA specification (with some modifications).
+ *  This allows the use of NCQ. Non-DMA-mapped ATA commands are still
+ *  sent through the legacy interface.
+ *
  */
 
 #include <linux/kernel.h>
@@ -40,10 +45,13 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
 #include <linux/libata.h>
 
 #define DRV_NAME                        "sata_nv"
-#define DRV_VERSION                     "2.0"
+#define DRV_VERSION                     "3.2"
+
+#define NV_ADMA_DMA_BOUNDARY            0xffffffffUL
 
 enum {
         NV_PORTS                        = 2,
@@ -78,8 +86,138 @@ enum {
         // For PCI config register 20
         NV_MCP_SATA_CFG_20              = 0x50,
         NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
+        NV_MCP_SATA_CFG_20_PORT0_EN     = (1 << 17),
+        NV_MCP_SATA_CFG_20_PORT1_EN     = (1 << 16),
+        NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14),
+        NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12),
+
+        NV_ADMA_MAX_CPBS                = 32,
+        NV_ADMA_CPB_SZ                  = 128,
+        NV_ADMA_APRD_SZ                 = 16,
+        NV_ADMA_SGTBL_LEN               = (1024 - NV_ADMA_CPB_SZ) /
+                                           NV_ADMA_APRD_SZ,
+        NV_ADMA_SGTBL_TOTAL_LEN         = NV_ADMA_SGTBL_LEN + 5,
+        NV_ADMA_SGTBL_SZ                = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ,
+        NV_ADMA_PORT_PRIV_DMA_SZ        = NV_ADMA_MAX_CPBS *
+                                           (NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ),
+
+        /* BAR5 offset to ADMA general registers */
+        NV_ADMA_GEN                     = 0x400,
+        NV_ADMA_GEN_CTL                 = 0x00,
+        NV_ADMA_NOTIFIER_CLEAR          = 0x30,
+
+        /* BAR5 offset to ADMA ports */
+        NV_ADMA_PORT                    = 0x480,
+
+        /* size of ADMA port register space  */
+        NV_ADMA_PORT_SIZE               = 0x100,
+
+        /* ADMA port registers */
+        NV_ADMA_CTL                     = 0x40,
+        NV_ADMA_CPB_COUNT               = 0x42,
+        NV_ADMA_NEXT_CPB_IDX            = 0x43,
+        NV_ADMA_STAT                    = 0x44,
+        NV_ADMA_CPB_BASE_LOW            = 0x48,
+        NV_ADMA_CPB_BASE_HIGH           = 0x4C,
+        NV_ADMA_APPEND                  = 0x50,
+        NV_ADMA_NOTIFIER                = 0x68,
+        NV_ADMA_NOTIFIER_ERROR          = 0x6C,
+
+        /* NV_ADMA_CTL register bits */
+        NV_ADMA_CTL_HOTPLUG_IEN         = (1 << 0),
+        NV_ADMA_CTL_CHANNEL_RESET       = (1 << 5),
+        NV_ADMA_CTL_GO                  = (1 << 7),
+        NV_ADMA_CTL_AIEN                = (1 << 8),
+        NV_ADMA_CTL_READ_NON_COHERENT   = (1 << 11),
+        NV_ADMA_CTL_WRITE_NON_COHERENT  = (1 << 12),
+
+        /* CPB response flag bits */
+        NV_CPB_RESP_DONE                = (1 << 0),
+        NV_CPB_RESP_ATA_ERR             = (1 << 3),
+        NV_CPB_RESP_CMD_ERR             = (1 << 4),
+        NV_CPB_RESP_CPB_ERR             = (1 << 7),
+
+        /* CPB control flag bits */
+        NV_CPB_CTL_CPB_VALID            = (1 << 0),
+        NV_CPB_CTL_QUEUE                = (1 << 1),
+        NV_CPB_CTL_APRD_VALID           = (1 << 2),
+        NV_CPB_CTL_IEN                  = (1 << 3),
+        NV_CPB_CTL_FPDMA                = (1 << 4),
+
+        /* APRD flags */
+        NV_APRD_WRITE                   = (1 << 1),
+        NV_APRD_END                     = (1 << 2),
+        NV_APRD_CONT                    = (1 << 3),
+
+        /* NV_ADMA_STAT flags */
+        NV_ADMA_STAT_TIMEOUT            = (1 << 0),
+        NV_ADMA_STAT_HOTUNPLUG          = (1 << 1),
+        NV_ADMA_STAT_HOTPLUG            = (1 << 2),
+        NV_ADMA_STAT_CPBERR             = (1 << 4),
+        NV_ADMA_STAT_SERROR             = (1 << 5),
+        NV_ADMA_STAT_CMD_COMPLETE       = (1 << 6),
+        NV_ADMA_STAT_IDLE               = (1 << 8),
+        NV_ADMA_STAT_LEGACY             = (1 << 9),
+        NV_ADMA_STAT_STOPPED            = (1 << 10),
+        NV_ADMA_STAT_DONE               = (1 << 12),
+        NV_ADMA_STAT_ERR                = NV_ADMA_STAT_CPBERR |
+                                          NV_ADMA_STAT_TIMEOUT,
+
+        /* port flags */
+        NV_ADMA_PORT_REGISTER_MODE      = (1 << 0),
+        NV_ADMA_ATAPI_SETUP_COMPLETE    = (1 << 1),
+
+};
+
+/* ADMA Physical Region Descriptor - one SG segment */
+struct nv_adma_prd {
+        __le64                  addr;
+        __le32                  len;
+        u8                      flags;
+        u8                      packet_len;
+        __le16                  reserved;
+};
+
+enum nv_adma_regbits {
+        CMDEND  = (1 << 15),            /* end of command list */
+        WNB     = (1 << 14),            /* wait-not-BSY */
+        IGN     = (1 << 13),            /* ignore this entry */
+        CS1n    = (1 << (4 + 8)),       /* std. PATA signals follow... */
+        DA2     = (1 << (2 + 8)),
+        DA1     = (1 << (1 + 8)),
+        DA0     = (1 << (0 + 8)),
+};
+
+/* ADMA Command Parameter Block
+   The first 5 SG segments are stored inside the Command Parameter Block itself.
+   If there are more than 5 segments the remainder are stored in a separate
+   memory area indicated by next_aprd. */
+struct nv_adma_cpb {
+        u8                      resp_flags;    /* 0 */
+        u8                      reserved1;     /* 1 */
+        u8                      ctl_flags;     /* 2 */
+        /* len is length of taskfile in 64 bit words */
+        u8                      len;           /* 3  */
+        u8                      tag;           /* 4 */
+        u8                      next_cpb_idx;  /* 5 */
+        __le16                  reserved2;     /* 6-7 */
+        __le16                  tf[12];        /* 8-31 */
+        struct nv_adma_prd      aprd[5];       /* 32-111 */
+        __le64                  next_aprd;     /* 112-119 */
+        __le64                  reserved3;     /* 120-127 */
+};
+
+
+struct nv_adma_port_priv {
+        struct nv_adma_cpb      *cpb;
+        dma_addr_t              cpb_dma;
+        struct nv_adma_prd      *aprd;
+        dma_addr_t              aprd_dma;
+        u8                      flags;
 };
 
+#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
+
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
 static void nv_ck804_host_stop(struct ata_host *host);
 static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
@@ -93,13 +231,28 @@ static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
 static void nv_error_handler(struct ata_port *ap);
+static int nv_adma_slave_config(struct scsi_device *sdev);
+static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
+static void nv_adma_irq_clear(struct ata_port *ap);
+static int nv_adma_port_start(struct ata_port *ap);
+static void nv_adma_port_stop(struct ata_port *ap);
+static void nv_adma_error_handler(struct ata_port *ap);
+static void nv_adma_host_stop(struct ata_host *host);
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc);
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 nv_adma_bmdma_status(struct ata_port *ap);
 
 enum nv_host_type
 {
         GENERIC,
         NFORCE2,
         NFORCE3 = NFORCE2,      /* NF2 == NF3 as far as sata_nv is concerned */
-        CK804
+        CK804,
+        ADMA
 };
 
 static const struct pci_device_id nv_pci_tbl[] = {
@@ -160,6 +313,24 @@ static struct scsi_host_template nv_sht = {
         .bios_param             = ata_std_bios_param,
 };
 
+static struct scsi_host_template nv_adma_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = NV_ADMA_MAX_CPBS,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = NV_ADMA_SGTBL_TOTAL_LEN,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = NV_ADMA_DMA_BOUNDARY,
+        .slave_configure        = nv_adma_slave_config,
+        .slave_destroy          = ata_scsi_slave_destroy,
+        .bios_param             = ata_std_bios_param,
+};
+
 static const struct ata_port_operations nv_generic_ops = {
         .port_disable           = ata_port_disable,
         .tf_load                = ata_tf_load,
@@ -241,11 +412,40 @@ static const struct ata_port_operations nv_ck804_ops = {
         .host_stop              = nv_ck804_host_stop,
 };
 
+static const struct ata_port_operations nv_adma_ops = {
+        .port_disable           = ata_port_disable,
+        .tf_load                = ata_tf_load,
+        .tf_read                = ata_tf_read,
+        .check_atapi_dma        = nv_adma_check_atapi_dma,
+        .exec_command           = ata_exec_command,
+        .check_status           = ata_check_status,
+        .dev_select             = ata_std_dev_select,
+        .bmdma_setup            = nv_adma_bmdma_setup,
+        .bmdma_start            = nv_adma_bmdma_start,
+        .bmdma_stop             = nv_adma_bmdma_stop,
+        .bmdma_status           = nv_adma_bmdma_status,
+        .qc_prep                = nv_adma_qc_prep,
+        .qc_issue               = nv_adma_qc_issue,
+        .freeze                 = nv_ck804_freeze,
+        .thaw                   = nv_ck804_thaw,
+        .error_handler          = nv_adma_error_handler,
+        .post_internal_cmd      = nv_adma_bmdma_stop,
+        .data_xfer              = ata_mmio_data_xfer,
+        .irq_handler            = nv_adma_interrupt,
+        .irq_clear              = nv_adma_irq_clear,
+        .scr_read               = nv_scr_read,
+        .scr_write              = nv_scr_write,
+        .port_start             = nv_adma_port_start,
+        .port_stop              = nv_adma_port_stop,
+        .host_stop              = nv_adma_host_stop,
+};
+
 static struct ata_port_info nv_port_info[] = {
         /* generic */
         {
                 .sht            = &nv_sht,
-                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_HRST_TO_RESUME,
                 .pio_mask       = NV_PIO_MASK,
                 .mwdma_mask     = NV_MWDMA_MASK,
                 .udma_mask      = NV_UDMA_MASK,
@@ -254,7 +454,8 @@ static struct ata_port_info nv_port_info[] = {
         /* nforce2/3 */
         {
                 .sht            = &nv_sht,
-                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_HRST_TO_RESUME,
                 .pio_mask       = NV_PIO_MASK,
                 .mwdma_mask     = NV_MWDMA_MASK,
                 .udma_mask      = NV_UDMA_MASK,
@@ -263,12 +464,23 @@ static struct ata_port_info nv_port_info[] = {
         /* ck804 */
         {
                 .sht            = &nv_sht,
-                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_HRST_TO_RESUME,
                 .pio_mask       = NV_PIO_MASK,
                 .mwdma_mask     = NV_MWDMA_MASK,
                 .udma_mask      = NV_UDMA_MASK,
                 .port_ops       = &nv_ck804_ops,
         },
+        /* ADMA */
+        {
+                .sht            = &nv_adma_sht,
+                .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+                                  ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+                .pio_mask       = NV_PIO_MASK,
+                .mwdma_mask     = NV_MWDMA_MASK,
+                .udma_mask      = NV_UDMA_MASK,
+                .port_ops       = &nv_adma_ops,
+        },
 };
 
 MODULE_AUTHOR("NVIDIA");
@@ -277,37 +489,220 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
-static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
+static int adma_enabled = 1;
+
+static inline void __iomem *__nv_adma_ctl_block(void __iomem *mmio,
+                                                unsigned int port_no)
 {
-        struct ata_host *host = dev_instance;
-        unsigned int i;
-        unsigned int handled = 0;
-        unsigned long flags;
+        mmio += NV_ADMA_PORT + port_no * NV_ADMA_PORT_SIZE;
+        return mmio;
+}
 
-        spin_lock_irqsave(&host->lock, flags);
+static inline void __iomem *nv_adma_ctl_block(struct ata_port *ap)
+{
+        return __nv_adma_ctl_block(ap->host->mmio_base, ap->port_no);
+}
 
-        for (i = 0; i < host->n_ports; i++) {
-                struct ata_port *ap;
+static inline void __iomem *nv_adma_gen_block(struct ata_port *ap)
+{
+        return (ap->host->mmio_base + NV_ADMA_GEN);
+}
 
-                ap = host->ports[i];
-                if (ap &&
-                    !(ap->flags & ATA_FLAG_DISABLED)) {
-                        struct ata_queued_cmd *qc;
+static inline void __iomem *nv_adma_notifier_clear_block(struct ata_port *ap)
+{
+        return (nv_adma_gen_block(ap) + NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no));
+}
 
-                        qc = ata_qc_from_tag(ap, ap->active_tag);
-                        if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
-                                handled += ata_host_intr(ap, qc);
-                        else
-                                // No request pending?  Clear interrupt status
-                                // anyway, in case there's one pending.
-                                ap->ops->check_status(ap);
-                }
+static void nv_adma_register_mode(struct ata_port *ap)
+{
+        void __iomem *mmio = nv_adma_ctl_block(ap);
+        struct nv_adma_port_priv *pp = ap->private_data;
+        u16 tmp;
+
+        if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
+                return;
+
+        tmp = readw(mmio + NV_ADMA_CTL);
+        writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+        pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static void nv_adma_mode(struct ata_port *ap)
+{
+        void __iomem *mmio = nv_adma_ctl_block(ap);
+        struct nv_adma_port_priv *pp = ap->private_data;
+        u16 tmp;
 
+        if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
+                return;
+                
+        WARN_ON(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
+
+        tmp = readw(mmio + NV_ADMA_CTL);
+        writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+        pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
+}
+
+static int nv_adma_slave_config(struct scsi_device *sdev)
+{
+        struct ata_port *ap = ata_shost_to_port(sdev->host);
+        struct nv_adma_port_priv *pp = ap->private_data;
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        u64 bounce_limit;
+        unsigned long segment_boundary;
+        unsigned short sg_tablesize;
+        int rc;
+        int adma_enable;
+        u32 current_reg, new_reg, config_mask;
+
+        rc = ata_scsi_slave_config(sdev);
+
+        if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
+                /* Not a proper libata device, ignore */
+                return rc;
+
+        if (ap->device[sdev->id].class == ATA_DEV_ATAPI) {
+                /*
+                 * NVIDIA reports that ADMA mode does not support ATAPI commands.
+                 * Therefore ATAPI commands are sent through the legacy interface.
+                 * However, the legacy interface only supports 32-bit DMA.
+                 * Restrict DMA parameters as required by the legacy interface
+                 * when an ATAPI device is connected.
+                 */
+                bounce_limit = ATA_DMA_MASK;
+                segment_boundary = ATA_DMA_BOUNDARY;
+                /* Subtract 1 since an extra entry may be needed for padding, see
+                   libata-scsi.c */
+                sg_tablesize = LIBATA_MAX_PRD - 1;
+                
+                /* Since the legacy DMA engine is in use, we need to disable ADMA
+                   on the port. */
+                adma_enable = 0;
+                nv_adma_register_mode(ap);
+        }
+        else {
+                bounce_limit = *ap->dev->dma_mask;
+                segment_boundary = NV_ADMA_DMA_BOUNDARY;
+                sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
+                adma_enable = 1;
+        }
+        
+        pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &current_reg);
+
+        if(ap->port_no == 1)
+                config_mask = NV_MCP_SATA_CFG_20_PORT1_EN |
+                              NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
+        else
+                config_mask = NV_MCP_SATA_CFG_20_PORT0_EN |
+                              NV_MCP_SATA_CFG_20_PORT0_PWB_EN;
+        
+        if(adma_enable) {
+                new_reg = current_reg | config_mask;
+                pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
+        }
+        else {
+                new_reg = current_reg & ~config_mask;
+                pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
         }
+        
+        if(current_reg != new_reg)
+                pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg);
+        
+        blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
+        blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
+        blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
+        ata_port_printk(ap, KERN_INFO,
+                "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
+                (unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
+        return rc;
+}
 
-        spin_unlock_irqrestore(&host->lock, flags);
+static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+        struct nv_adma_port_priv *pp = qc->ap->private_data;
+        return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
+}
 
-        return IRQ_RETVAL(handled);
+static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
+{
+        unsigned int idx = 0;
+
+        cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device | WNB);
+
+        if ((tf->flags & ATA_TFLAG_LBA48) == 0) {
+                cpb[idx++] = cpu_to_le16(IGN);
+                cpb[idx++] = cpu_to_le16(IGN);
+                cpb[idx++] = cpu_to_le16(IGN);
+                cpb[idx++] = cpu_to_le16(IGN);
+                cpb[idx++] = cpu_to_le16(IGN);
+        }
+        else {
+                cpb[idx++] = cpu_to_le16((ATA_REG_ERR   << 8) | tf->hob_feature);
+                cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
+                cpb[idx++] = cpu_to_le16((ATA_REG_LBAL  << 8) | tf->hob_lbal);
+                cpb[idx++] = cpu_to_le16((ATA_REG_LBAM  << 8) | tf->hob_lbam);
+                cpb[idx++] = cpu_to_le16((ATA_REG_LBAH  << 8) | tf->hob_lbah);
+        }
+        cpb[idx++] = cpu_to_le16((ATA_REG_ERR    << 8) | tf->feature);
+        cpb[idx++] = cpu_to_le16((ATA_REG_NSECT  << 8) | tf->nsect);
+        cpb[idx++] = cpu_to_le16((ATA_REG_LBAL   << 8) | tf->lbal);
+        cpb[idx++] = cpu_to_le16((ATA_REG_LBAM   << 8) | tf->lbam);
+        cpb[idx++] = cpu_to_le16((ATA_REG_LBAH   << 8) | tf->lbah);
+
+        cpb[idx++] = cpu_to_le16((ATA_REG_CMD    << 8) | tf->command | CMDEND);
+
+        return idx;
+}
+
+static void nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
+{
+        struct nv_adma_port_priv *pp = ap->private_data;
+        int complete = 0, have_err = 0;
+        u8 flags = pp->cpb[cpb_num].resp_flags;
+
+        VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags);
+
+        if (flags & NV_CPB_RESP_DONE) {
+                VPRINTK("CPB flags done, flags=0x%x\n", flags);
+                complete = 1;
+        }
+        if (flags & NV_CPB_RESP_ATA_ERR) {
+                ata_port_printk(ap, KERN_ERR, "CPB flags ATA err, flags=0x%x\n", flags);
+                have_err = 1;
+                complete = 1;
+        }
+        if (flags & NV_CPB_RESP_CMD_ERR) {
+                ata_port_printk(ap, KERN_ERR, "CPB flags CMD err, flags=0x%x\n", flags);
+                have_err = 1;
+                complete = 1;
+        }
+        if (flags & NV_CPB_RESP_CPB_ERR) {
+                ata_port_printk(ap, KERN_ERR, "CPB flags CPB err, flags=0x%x\n", flags);
+                have_err = 1;
+                complete = 1;
+        }
+        if(complete || force_err)
+        {
+                struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num);
+                if(likely(qc)) {
+                        u8 ata_status = 0;
+                        /* Only use the ATA port status for non-NCQ commands.
+                           For NCQ commands the current status may have nothing to do with
+                           the command just completed. */
+                        if(qc->tf.protocol != ATA_PROT_NCQ)
+                                ata_status = readb(nv_adma_ctl_block(ap) + (ATA_REG_STATUS * 4));
+
+                        if(have_err || force_err)
+                                ata_status |= ATA_ERR;
+
+                        qc->err_mask |= ac_err_mask(ata_status);
+                        DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
+                                qc->err_mask);
+                        ata_qc_complete(qc);
+                }
+        }
 }
 
 static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
@@ -341,6 +736,486 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
         return 1;
 }
 
+static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
+{
+        struct ata_host *host = dev_instance;
+        int i, handled = 0;
+        u32 notifier_clears[2];
+
+        spin_lock(&host->lock);
+
+        for (i = 0; i < host->n_ports; i++) {
+                struct ata_port *ap = host->ports[i];
+                notifier_clears[i] = 0;
+
+                if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
+                        struct nv_adma_port_priv *pp = ap->private_data;
+                        void __iomem *mmio = nv_adma_ctl_block(ap);
+                        u16 status;
+                        u32 gen_ctl;
+                        int have_global_err = 0;
+                        u32 notifier, notifier_error;
+
+                        /* if in ATA register mode, use standard ata interrupt handler */
+                        if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
+                                u8 irq_stat = readb(host->mmio_base + NV_INT_STATUS_CK804)
+                                        >> (NV_INT_PORT_SHIFT * i);
+                                handled += nv_host_intr(ap, irq_stat);
+                                continue;
+                        }
+
+                        notifier = readl(mmio + NV_ADMA_NOTIFIER);
+                        notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+                        notifier_clears[i] = notifier | notifier_error;
+
+                        gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+
+                        if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
+                            !notifier_error)
+                                /* Nothing to do */
+                                continue;
+
+                        status = readw(mmio + NV_ADMA_STAT);
+
+                        /* Clear status. Ensure the controller sees the clearing before we start
+                           looking at any of the CPB statuses, so that any CPB completions after
+                           this point in the handler will raise another interrupt. */
+                        writew(status, mmio + NV_ADMA_STAT);
+                        readw(mmio + NV_ADMA_STAT); /* flush posted write */
+                        rmb();
+
+                        /* freeze if hotplugged */
+                        if (unlikely(status & (NV_ADMA_STAT_HOTPLUG | NV_ADMA_STAT_HOTUNPLUG))) {
+                                ata_port_printk(ap, KERN_NOTICE, "Hotplug event, freezing\n");
+                                ata_port_freeze(ap);
+                                handled++;
+                                continue;
+                        }
+
+                        if (status & NV_ADMA_STAT_TIMEOUT) {
+                                ata_port_printk(ap, KERN_ERR, "timeout, stat=0x%x\n", status);
+                                have_global_err = 1;
+                        }
+                        if (status & NV_ADMA_STAT_CPBERR) {
+                                ata_port_printk(ap, KERN_ERR, "CPB error, stat=0x%x\n", status);
+                                have_global_err = 1;
+                        }
+                        if ((status & NV_ADMA_STAT_DONE) || have_global_err) {
+                                /** Check CPBs for completed commands */
+
+                                if(ata_tag_valid(ap->active_tag))
+                                        /* Non-NCQ command */
+                                        nv_adma_check_cpb(ap, ap->active_tag, have_global_err ||
+                                                (notifier_error & (1 << ap->active_tag)));
+                                else {
+                                        int pos;
+                                        u32 active = ap->sactive;
+                                        while( (pos = ffs(active)) ) {
+                                                pos--;
+                                                nv_adma_check_cpb(ap, pos, have_global_err ||
+                                                        (notifier_error & (1 << pos)) );
+                                                active &= ~(1 << pos );
+                                        }
+                                }
+                        }
+
+                        handled++; /* irq handled if we got here */
+                }
+        }
+        
+        if(notifier_clears[0] || notifier_clears[1]) {
+                /* Note: Both notifier clear registers must be written
+                   if either is set, even if one is zero, according to NVIDIA. */
+                writel(notifier_clears[0], 
+                        nv_adma_notifier_clear_block(host->ports[0]));
+                writel(notifier_clears[1], 
+                        nv_adma_notifier_clear_block(host->ports[1]));
+        }
+
+        spin_unlock(&host->lock);
+
+        return IRQ_RETVAL(handled);
+}
+
+static void nv_adma_irq_clear(struct ata_port *ap)
+{
+        void __iomem *mmio = nv_adma_ctl_block(ap);
+        u16 status = readw(mmio + NV_ADMA_STAT);
+        u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+        u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+        unsigned long dma_stat_addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
+
+        /* clear ADMA status */
+        writew(status, mmio + NV_ADMA_STAT);
+        writel(notifier | notifier_error,
+               nv_adma_notifier_clear_block(ap));
+
+        /** clear legacy status */
+        outb(inb(dma_stat_addr), dma_stat_addr);
+}
+
+static void nv_adma_bmdma_setup(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+        struct nv_adma_port_priv *pp = ap->private_data;
+        u8 dmactl;
+
+        if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+                WARN_ON(1);
+                return;
+        }
+
+        /* load PRD table addr. */
+        outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+
+        /* specify data direction, triple-check start bit is clear */
+        dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+        dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+        if (!rw)
+                dmactl |= ATA_DMA_WR;
+
+        outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+        /* issue r/w command */
+        ata_exec_command(ap, &qc->tf);
+}
+
+static void nv_adma_bmdma_start(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        struct nv_adma_port_priv *pp = ap->private_data;
+        u8 dmactl;
+
+        if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+                WARN_ON(1);
+                return;
+        }
+
+        /* start host DMA transaction */
+        dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+        outb(dmactl | ATA_DMA_START,
+             ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+}
+
+static void nv_adma_bmdma_stop(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        struct nv_adma_port_priv *pp = ap->private_data;
+
+        if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
+                return;
+
+        /* clear start/stop bit */
+        outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
+                ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+        /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+        ata_altstatus(ap);        /* dummy read */
+}
+
+static u8 nv_adma_bmdma_status(struct ata_port *ap)
+{
+        struct nv_adma_port_priv *pp = ap->private_data;
+
+        WARN_ON(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE));
+
+        return inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+}
+
+static int nv_adma_port_start(struct ata_port *ap)
+{
+        struct device *dev = ap->host->dev;
+        struct nv_adma_port_priv *pp;
+        int rc;
+        void *mem;
+        dma_addr_t mem_dma;
+        void __iomem *mmio = nv_adma_ctl_block(ap);
+        u16 tmp;
+
+        VPRINTK("ENTER\n");
+
+        rc = ata_port_start(ap);
+        if (rc)
+                return rc;
+
+        pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+        if (!pp) {
+                rc = -ENOMEM;
+                goto err_out;
+        }
+
+        mem = dma_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
+                                 &mem_dma, GFP_KERNEL);
+
+        if (!mem) {
+                rc = -ENOMEM;
+                goto err_out_kfree;
+        }
+        memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ);
+
+        /*
+         * First item in chunk of DMA memory:
+         * 128-byte command parameter block (CPB)
+         * one for each command tag
+         */
+        pp->cpb     = mem;
+        pp->cpb_dma = mem_dma;
+
+        writel(mem_dma & 0xFFFFFFFF,    mmio + NV_ADMA_CPB_BASE_LOW);
+        writel((mem_dma >> 16 ) >> 16,  mmio + NV_ADMA_CPB_BASE_HIGH);
+
+        mem     += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+        mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
+
+        /*
+         * Second item: block of ADMA_SGTBL_LEN s/g entries
+         */
+        pp->aprd = mem;
+        pp->aprd_dma = mem_dma;
+
+        ap->private_data = pp;
+
+        /* clear any outstanding interrupt conditions */
+        writew(0xffff, mmio + NV_ADMA_STAT);
+
+        /* initialize port variables */
+        pp->flags = NV_ADMA_PORT_REGISTER_MODE;
+
+        /* clear CPB fetch count */
+        writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+        /* clear GO for register mode */
+        tmp = readw(mmio + NV_ADMA_CTL);
+        writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
+
+        tmp = readw(mmio + NV_ADMA_CTL);
+        writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+        readl( mmio + NV_ADMA_CTL );    /* flush posted write */
+        udelay(1);
+        writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+        readl( mmio + NV_ADMA_CTL );    /* flush posted write */
+
+        return 0;
+
+err_out_kfree:
+        kfree(pp);
+err_out:
+        ata_port_stop(ap);
+        return rc;
+}
+
+static void nv_adma_port_stop(struct ata_port *ap)
+{
+        struct device *dev = ap->host->dev;
+        struct nv_adma_port_priv *pp = ap->private_data;
+        void __iomem *mmio = nv_adma_ctl_block(ap);
+
+        VPRINTK("ENTER\n");
+
+        writew(0, mmio + NV_ADMA_CTL);
+
+        ap->private_data = NULL;
+        dma_free_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, pp->cpb, pp->cpb_dma);
+        kfree(pp);
+        ata_port_stop(ap);
+}
+
+
+static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+{
+        void __iomem *mmio = probe_ent->mmio_base;
+        struct ata_ioports *ioport = &probe_ent->port[port];
+
+        VPRINTK("ENTER\n");
+
+        mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+
+        ioport->cmd_addr        = (unsigned long) mmio;
+        ioport->data_addr       = (unsigned long) mmio + (ATA_REG_DATA * 4);
+        ioport->error_addr      =
+        ioport->feature_addr    = (unsigned long) mmio + (ATA_REG_ERR * 4);
+        ioport->nsect_addr      = (unsigned long) mmio + (ATA_REG_NSECT * 4);
+        ioport->lbal_addr       = (unsigned long) mmio + (ATA_REG_LBAL * 4);
+        ioport->lbam_addr       = (unsigned long) mmio + (ATA_REG_LBAM * 4);
+        ioport->lbah_addr       = (unsigned long) mmio + (ATA_REG_LBAH * 4);
+        ioport->device_addr     = (unsigned long) mmio + (ATA_REG_DEVICE * 4);
+        ioport->status_addr     =
+        ioport->command_addr    = (unsigned long) mmio + (ATA_REG_STATUS * 4);
+        ioport->altstatus_addr  =
+        ioport->ctl_addr        = (unsigned long) mmio + 0x20;
+}
+
+static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+{
+        struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+        unsigned int i;
+        u32 tmp32;
+
+        VPRINTK("ENTER\n");
+
+        /* enable ADMA on the ports */
+        pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+        tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN |
+                 NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+                 NV_MCP_SATA_CFG_20_PORT1_EN |
+                 NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
+
+        pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+        for (i = 0; i < probe_ent->n_ports; i++)
+                nv_adma_setup_port(probe_ent, i);
+
+        for (i = 0; i < probe_ent->n_ports; i++) {
+                void __iomem *mmio = __nv_adma_ctl_block(probe_ent->mmio_base, i);
+                u16 tmp;
+
+                /* enable interrupt, clear reset if not already clear */
+                tmp = readw(mmio + NV_ADMA_CTL);
+                writew(tmp | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+        }
+
+        return 0;
+}
+
+static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
+                              struct scatterlist *sg,
+                              int idx,
+                              struct nv_adma_prd *aprd)
+{
+        u8 flags;
+
+        memset(aprd, 0, sizeof(struct nv_adma_prd));
+
+        flags = 0;
+        if (qc->tf.flags & ATA_TFLAG_WRITE)
+                flags |= NV_APRD_WRITE;
+        if (idx == qc->n_elem - 1)
+                flags |= NV_APRD_END;
+        else if (idx != 4)
+                flags |= NV_APRD_CONT;
+
+        aprd->addr  = cpu_to_le64(((u64)sg_dma_address(sg)));
+        aprd->len   = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
+        aprd->flags = flags;
+}
+
+static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
+{
+        struct nv_adma_port_priv *pp = qc->ap->private_data;
+        unsigned int idx;
+        struct nv_adma_prd *aprd;
+        struct scatterlist *sg;
+
+        VPRINTK("ENTER\n");
+
+        idx = 0;
+
+        ata_for_each_sg(sg, qc) {
+                aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
+                nv_adma_fill_aprd(qc, sg, idx, aprd);
+                idx++;
+        }
+        if (idx > 5)
+                cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
+}
+
+static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
+{
+        struct nv_adma_port_priv *pp = qc->ap->private_data;
+        struct nv_adma_cpb *cpb = &pp->cpb[qc->tag];
+        u8 ctl_flags = NV_CPB_CTL_CPB_VALID |
+                       NV_CPB_CTL_APRD_VALID |
+                       NV_CPB_CTL_IEN;
+
+        VPRINTK("qc->flags = 0x%lx\n", qc->flags);
+
+        if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+             (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) {
+                nv_adma_register_mode(qc->ap);
+                ata_qc_prep(qc);
+                return;
+        }
+
+        memset(cpb, 0, sizeof(struct nv_adma_cpb));
+
+        cpb->len                = 3;
+        cpb->tag                = qc->tag;
+        cpb->next_cpb_idx       = 0;
+
+        /* turn on NCQ flags for NCQ commands */
+        if (qc->tf.protocol == ATA_PROT_NCQ)
+                ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA;
+
+        nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
+
+        nv_adma_fill_sg(qc, cpb);
+
+        /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
+           finished filling in all of the contents */
+        wmb();
+        cpb->ctl_flags = ctl_flags;
+}
+
+static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
+{
+        struct nv_adma_port_priv *pp = qc->ap->private_data;
+        void __iomem *mmio = nv_adma_ctl_block(qc->ap);
+
+        VPRINTK("ENTER\n");
+
+        if (!(qc->flags & ATA_QCFLAG_DMAMAP) ||
+             (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) {
+                /* use ATA register mode */
+                VPRINTK("no dmamap or ATAPI, using ATA register mode: 0x%lx\n", qc->flags);
+                nv_adma_register_mode(qc->ap);
+                return ata_qc_issue_prot(qc);
+        } else
+                nv_adma_mode(qc->ap);
+
+        /* write append register, command tag in lower 8 bits
+           and (number of cpbs to append -1) in top 8 bits */
+        wmb();
+        writew(qc->tag, mmio + NV_ADMA_APPEND);
+
+        DPRINTK("Issued tag %u\n",qc->tag);
+
+        return 0;
+}
+
+static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
+{
+        struct ata_host *host = dev_instance;
+        unsigned int i;
+        unsigned int handled = 0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&host->lock, flags);
+
+        for (i = 0; i < host->n_ports; i++) {
+                struct ata_port *ap;
+
+                ap = host->ports[i];
+                if (ap &&
+                    !(ap->flags & ATA_FLAG_DISABLED)) {
+                        struct ata_queued_cmd *qc;
+
+                        qc = ata_qc_from_tag(ap, ap->active_tag);
+                        if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
+                                handled += ata_host_intr(ap, qc);
+                        else
+                                // No request pending?  Clear interrupt status
+                                // anyway, in case there's one pending.
+                                ap->ops->check_status(ap);
+                }
+
+        }
+
+        spin_unlock_irqrestore(&host->lock, flags);
+
+        return IRQ_RETVAL(handled);
+}
+
 static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat)
 {
         int i, handled = 0;
@@ -466,6 +1341,56 @@ static void nv_error_handler(struct ata_port *ap)
                            nv_hardreset, ata_std_postreset);
 }
 
+static void nv_adma_error_handler(struct ata_port *ap)
+{
+        struct nv_adma_port_priv *pp = ap->private_data;
+        if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
+                void __iomem *mmio = nv_adma_ctl_block(ap);
+                int i;
+                u16 tmp;
+
+                u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
+                u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
+                u32 gen_ctl = readl(nv_adma_gen_block(ap) + NV_ADMA_GEN_CTL);
+                u32 status = readw(mmio + NV_ADMA_STAT);
+
+                ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
+                        "notifier_error 0x%X gen_ctl 0x%X status 0x%X\n",
+                        notifier, notifier_error, gen_ctl, status);
+
+                for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
+                        struct nv_adma_cpb *cpb = &pp->cpb[i];
+                        if( cpb->ctl_flags || cpb->resp_flags )
+                                ata_port_printk(ap, KERN_ERR,
+                                        "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
+                                        i, cpb->ctl_flags, cpb->resp_flags);
+                }
+
+                /* Push us back into port register mode for error handling. */
+                nv_adma_register_mode(ap);
+
+                ata_port_printk(ap, KERN_ERR, "Resetting port\n");
+
+                /* Mark all of the CPBs as invalid to prevent them from being executed */
+                for( i=0;i<NV_ADMA_MAX_CPBS;i++)
+                        pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
+
+                /* clear CPB fetch count */
+                writew(0, mmio + NV_ADMA_CPB_COUNT);
+
+                /* Reset channel */
+                tmp = readw(mmio + NV_ADMA_CTL);
+                writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+                readl( mmio + NV_ADMA_CTL );    /* flush posted write */
+                udelay(1);
+                writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
+                readl( mmio + NV_ADMA_CTL );    /* flush posted write */
+        }
+
+        ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
+                           nv_hardreset, ata_std_postreset);
+}
+
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version = 0;
@@ -475,6 +1400,8 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         int rc;
         u32 bar;
         unsigned long base;
+        unsigned long type = ent->driver_data;
+        int mask_set = 0;
 
         // Make sure this is a SATA controller by counting the number of bars
         // (NVIDIA SATA controllers will always have six bars).  Otherwise,
@@ -483,7 +1410,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                 if (pci_resource_start(pdev, bar) == 0)
                         return -ENODEV;
 
-        if (!printed_version++)
+        if (    !printed_version++)
                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
         rc = pci_enable_device(pdev);
@@ -496,16 +1423,26 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                 goto err_out_disable;
         }
 
-        rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-        if (rc)
-                goto err_out_regions;
-        rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-        if (rc)
-                goto err_out_regions;
+        if(type >= CK804 && adma_enabled) {
+                dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
+                type = ADMA;
+                if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+                   !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+                        mask_set = 1;
+        }
+
+        if(!mask_set) {
+                rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+                if (rc)
+                        goto err_out_regions;
+                rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+                if (rc)
+                        goto err_out_regions;
+        }
 
         rc = -ENOMEM;
 
-        ppi[0] = ppi[1] = &nv_port_info[ent->driver_data];
+        ppi[0] = ppi[1] = &nv_port_info[type];
         probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
         if (!probe_ent)
                 goto err_out_regions;
@@ -522,7 +1459,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
 
         /* enable SATA space for CK804 */
-        if (ent->driver_data == CK804) {
+        if (type >= CK804) {
                 u8 regval;
 
                 pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
@@ -532,6 +1469,12 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
         pci_set_master(pdev);
 
+        if (type == ADMA) {
+                rc = nv_adma_host_init(probe_ent);
+                if (rc)
+                        goto err_out_iounmap;
+        }
+
         rc = ata_device_add(probe_ent);
         if (rc != NV_PORTS)
                 goto err_out_iounmap;
@@ -566,6 +1509,33 @@ static void nv_ck804_host_stop(struct ata_host *host)
         ata_pci_host_stop(host);
 }
 
+static void nv_adma_host_stop(struct ata_host *host)
+{
+        struct pci_dev *pdev = to_pci_dev(host->dev);
+        int i;
+        u32 tmp32;
+
+        for (i = 0; i < host->n_ports; i++) {
+                void __iomem *mmio = __nv_adma_ctl_block(host->mmio_base, i);
+                u16 tmp;
+
+                /* disable interrupt */
+                tmp = readw(mmio + NV_ADMA_CTL);
+                writew(tmp & ~NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+        }
+
+        /* disable ADMA on the ports */
+        pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
+        tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
+                   NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
+                   NV_MCP_SATA_CFG_20_PORT1_EN |
+                   NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
+
+        pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
+
+        nv_ck804_host_stop(host);
+}
+
 static int __init nv_init(void)
 {
         return pci_register_driver(&nv_pci_driver);
@@ -578,3 +1548,5 @@ static void __exit nv_exit(void)
 
 module_init(nv_init);
 module_exit(nv_exit);
+module_param_named(adma, adma_enabled, bool, 0444);
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 72eda5160fad..a2778cf016bc 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -46,20 +46,19 @@
 #include "sata_promise.h"
 
 #define DRV_NAME        "sata_promise"
-#define DRV_VERSION     "1.04"
+#define DRV_VERSION     "1.05"
 
 
 enum {
         PDC_PKT_SUBMIT          = 0x40, /* Command packet pointer addr */
         PDC_INT_SEQMASK         = 0x40, /* Mask of asserted SEQ INTs */
-        PDC_TBG_MODE            = 0x41, /* TBG mode */
         PDC_FLASH_CTL           = 0x44, /* Flash control register */
-        PDC_PCI_CTL             = 0x48, /* PCI control and status register */
         PDC_GLOBAL_CTL          = 0x48, /* Global control/status (per port) */
         PDC_CTLSTAT             = 0x60, /* IDE control and status (per port) */
         PDC_SATA_PLUG_CSR       = 0x6C, /* SATA Plug control/status reg */
         PDC2_SATA_PLUG_CSR      = 0x60, /* SATAII Plug control/status reg */
-        PDC_SLEW_CTL            = 0x470, /* slew rate control reg */
+        PDC_TBG_MODE            = 0x41C, /* TBG mode (not SATAII) */
+        PDC_SLEW_CTL            = 0x470, /* slew rate control reg (not SATAII) */
 
         PDC_ERR_MASK            = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
                                   (1<<8) | (1<<9) | (1<<10),
@@ -78,6 +77,9 @@ enum {
         PDC_COMMON_FLAGS        = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
                                   ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
                                   ATA_FLAG_PIO_POLLING,
+
+        /* hp->flags bits */
+        PDC_FLAG_GEN_II         = (1 << 0),
 };
 
 
@@ -87,6 +89,7 @@ struct pdc_port_priv {
 };
 
 struct pdc_host_priv {
+        unsigned long           flags;
         int                     hotplug_offset;
 };
 
@@ -235,20 +238,20 @@ static const struct ata_port_info pdc_port_info[] = {
 
 static const struct pci_device_id pdc_ata_pci_tbl[] = {
         { PCI_VDEVICE(PROMISE, 0x3371), board_2037x },
-        { PCI_VDEVICE(PROMISE, 0x3570), board_2037x },
-        { PCI_VDEVICE(PROMISE, 0x3571), board_2037x },
         { PCI_VDEVICE(PROMISE, 0x3373), board_2037x },
         { PCI_VDEVICE(PROMISE, 0x3375), board_2037x },
         { PCI_VDEVICE(PROMISE, 0x3376), board_2037x },
+        { PCI_VDEVICE(PROMISE, 0x3570), board_2057x },
+        { PCI_VDEVICE(PROMISE, 0x3571), board_2057x },
         { PCI_VDEVICE(PROMISE, 0x3574), board_2057x },
+        { PCI_VDEVICE(PROMISE, 0x3d73), board_2057x },
         { PCI_VDEVICE(PROMISE, 0x3d75), board_2057x },
-        { PCI_VDEVICE(PROMISE, 0x3d73), board_2037x },
 
         { PCI_VDEVICE(PROMISE, 0x3318), board_20319 },
         { PCI_VDEVICE(PROMISE, 0x3319), board_20319 },
         { PCI_VDEVICE(PROMISE, 0x3515), board_20319 },
         { PCI_VDEVICE(PROMISE, 0x3519), board_20319 },
-        { PCI_VDEVICE(PROMISE, 0x3d17), board_20319 },
+        { PCI_VDEVICE(PROMISE, 0x3d17), board_40518 },
         { PCI_VDEVICE(PROMISE, 0x3d18), board_40518 },
 
         { PCI_VDEVICE(PROMISE, 0x6629), board_20619 },
@@ -277,6 +280,7 @@ static struct pci_driver pdc_ata_pci_driver = {
 static int pdc_port_start(struct ata_port *ap)
 {
         struct device *dev = ap->host->dev;
+        struct pdc_host_priv *hp = ap->host->private_data;
         struct pdc_port_priv *pp;
         int rc;
 
@@ -298,6 +302,16 @@ static int pdc_port_start(struct ata_port *ap)
 
         ap->private_data = pp;
 
+        /* fix up PHYMODE4 align timing */
+        if ((hp->flags & PDC_FLAG_GEN_II) && sata_scr_valid(ap)) {
+                void __iomem *mmio = (void __iomem *) ap->ioaddr.scr_addr;
+                unsigned int tmp;
+
+                tmp = readl(mmio + 0x014);
+                tmp = (tmp & ~3) | 1;   /* set bits 1:0 = 0:1 */
+                writel(tmp, mmio + 0x014);
+        }
+
         return 0;
 
 err_out_kfree:
@@ -640,9 +654,11 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
          * "TODO: figure out why we do this"
          */
 
-        /* change FIFO_SHD to 8 dwords, enable BMR_BURST */
+        /* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
         tmp = readl(mmio + PDC_FLASH_CTL);
-        tmp |= 0x12000; /* bit 16 (fifo 8 dw) and 13 (bmr burst?) */
+        tmp |= 0x02000; /* bit 13 (enable bmr burst) */
+        if (!(hp->flags & PDC_FLAG_GEN_II))
+                tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */
         writel(tmp, mmio + PDC_FLASH_CTL);
 
         /* clear plug/unplug flags for all ports */
@@ -653,6 +669,10 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
         tmp = readl(mmio + hotplug_offset);
         writel(tmp | 0xff0000, mmio + hotplug_offset);
 
+        /* don't initialise TBG or SLEW on 2nd generation chips */
+        if (hp->flags & PDC_FLAG_GEN_II)
+                return;
+
         /* reduce TBG clock to 133 Mhz. */
         tmp = readl(mmio + PDC_TBG_MODE);
         tmp &= ~0x30000; /* clear bit 17, 16*/
@@ -746,6 +766,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
         /* notice 4-port boards */
         switch (board_idx) {
         case board_40518:
+                hp->flags |= PDC_FLAG_GEN_II;
                 /* Override hotplug offset for SATAII150 */
                 hp->hotplug_offset = PDC2_SATA_PLUG_CSR;
                 /* Fall through */
@@ -759,15 +780,14 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
                 probe_ent->port[3].scr_addr = base + 0x700;
                 break;
         case board_2057x:
+        case board_20771:
+                hp->flags |= PDC_FLAG_GEN_II;
                 /* Override hotplug offset for SATAII150 */
                 hp->hotplug_offset = PDC2_SATA_PLUG_CSR;
                 /* Fall through */
         case board_2037x:
                 probe_ent->n_ports = 2;
                 break;
-        case board_20771:
-                probe_ent->n_ports = 2;
-                break;
         case board_20619:
                 probe_ent->n_ports = 4;
 
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index ca8d99312472..7808d0369d91 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -356,6 +356,7 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 
 static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 {
+        struct ata_eh_info *ehi = &ap->eh_info;
         struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
         u8 status;
 
@@ -428,6 +429,10 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
         /* kick HSM in the ass */
         ata_hsm_move(ap, qc, status, 0);
 
+        if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+                                       qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+                ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
+
         return;
 
  err_hsm:
@@ -534,6 +539,7 @@ static void sil_thaw(struct ata_port *ap)
  */
 static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
 {
+        int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
         unsigned int n, quirks = 0;
         unsigned char model_num[41];
 
@@ -549,16 +555,18 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
         if (slow_down ||
             ((ap->flags & SIL_FLAG_MOD15WRITE) &&
              (quirks & SIL_QUIRK_MOD15WRITE))) {
-                ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
-                               "(mod15write workaround)\n");
+                if (print_info)
+                        ata_dev_printk(dev, KERN_INFO, "applying Seagate "
+                                       "errata fix (mod15write workaround)\n");
                 dev->max_sectors = 15;
                 return;
         }
 
         /* limit to udma5 */
         if (quirks & SIL_QUIRK_UDMA5MAX) {
-                ata_dev_printk(dev, KERN_INFO,
-                               "applying Maxtor errata fix %s\n", model_num);
+                if (print_info)
+                        ata_dev_printk(dev, KERN_INFO, "applying Maxtor "
+                                       "errata fix %s\n", model_num);
                 dev->udma_mask &= ATA_UDMA5;
                 return;
         }
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 169e200a6a71..5aa288d2fb86 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -100,10 +100,14 @@ enum {
          */
         PORT_REGS_SIZE          = 0x2000,
 
-        PORT_LRAM               = 0x0000, /* 31 LRAM slots and PM regs */
+        PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
         PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
 
-        PORT_PM                 = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
+        PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
+        PORT_PMP_STATUS         = 0x0000, /* port device status offset */
+        PORT_PMP_QACTIVE        = 0x0004, /* port device QActive offset */
+        PORT_PMP_SIZE           = 0x0008, /* 8 bytes per PMP */
+
                 /* 32 bit regs */
         PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
         PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
@@ -126,6 +130,7 @@ enum {
         PORT_PHY_CFG            = 0x1050,
         PORT_SLOT_STAT          = 0x1800,
         PORT_CMD_ACTIVATE       = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
+        PORT_CONTEXT            = 0x1e04,
         PORT_EXEC_DIAG          = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
         PORT_PSD_DIAG           = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
         PORT_SCONTROL           = 0x1f00,
@@ -139,9 +144,9 @@ enum {
         PORT_CS_INIT            = (1 << 2), /* port initialize */
         PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
         PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
-        PORT_CS_RESUME          = (1 << 6), /* port resume */
+        PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
         PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
-        PORT_CS_PM_EN           = (1 << 13), /* port multiplier enable */
+        PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
         PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
 
         /* PORT_IRQ_STAT/ENABLE_SET/CLR */
@@ -562,7 +567,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
 
         /* do SRST */
         prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
-        prb->fis[1] = 0; /* no PM yet */
+        prb->fis[1] = 0; /* no PMP yet */
 
         writel((u32)paddr, port + PORT_CMD_ACTIVATE);
         writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
@@ -1050,7 +1055,8 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
                 writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
 
                 /* Clear port multiplier enable and resume bits */
-                writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
+                writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME,
+                       port + PORT_CTRL_CLR);
         }
 
         /* Turn on interrupts */
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 9d1235ba06b1..9c25a1e91730 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -173,7 +173,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
         if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
                 pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
 
-        return val|val2;
+        return (val|val2) &  0xfffffffb; /* avoid problems with powerdowned ports */
 }
 
 static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
@@ -212,7 +212,7 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
         if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
                 val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
 
-        return val | val2;
+        return (val | val2) &  0xfffffffb;
 }
 
 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
@@ -239,7 +239,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         static int printed_version;
         struct ata_probe_ent *probe_ent = NULL;
         int rc;
-        u32 genctl;
+        u32 genctl, val;
         struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
         int pci_dev_busy = 0;
         u8 pmr;
@@ -285,17 +285,24 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
         if (ent->device != 0x182) {
                 if ((pmr & SIS_PMR_COMBINED) == 0) {
                         dev_printk(KERN_INFO, &pdev->dev,
-                                   "Detected SiS 180/181 chipset in SATA mode\n");
+                                   "Detected SiS 180/181/964 chipset in SATA mode\n");
                         port2_start = 64;
                 }
                 else {
                         dev_printk(KERN_INFO, &pdev->dev,
                                    "Detected SiS 180/181 chipset in combined mode\n");
                         port2_start=0;
+                        pi.flags |= ATA_FLAG_SLAVE_POSS;
                 }
         }
         else {
-                dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
+                pci_read_config_dword ( pdev, 0x6C, &val);
+                if (val & (1L << 31)) {
+                        dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
+                        pi.flags |= ATA_FLAG_SLAVE_POSS;
+                }
+                else
+                        dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
                 port2_start = 0x20;
         }