libata: consistently use msecs for time durations

libata has been using mix of jiffies and msecs for time druations.
This is getting confusing.  As writing sub HZ values in jiffies is
PITA and msecs_to_jiffies() can't be used as initializer, unify unit
for all time durations to msecs.  So, durations are in msecs and
deadlines are in jiffies.  ata_deadline() is added to compute deadline
from a start time and duration in msecs.

While at it, drop now superflous _msec suffix from arguments and
rename @timeout to @deadline if it represents a fixed point in time
rather than duration.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

6 files changed, 52 insertions, 51 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 303fc0d2b978..c5c3b1b516e1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -54,7 +54,6 @@
 #include <linux/completion.h>
 #include <linux/suspend.h>
 #include <linux/workqueue.h>
-#include <linux/jiffies.h>
 #include <linux/scatterlist.h>
 #include <linux/io.h>
 #include <scsi/scsi.h>
@@ -145,7 +144,7 @@ static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CF
 module_param_named(dma, libata_dma_mask, int, 0444);
 MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
 
-static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
+static int ata_probe_timeout = ATA_TMOUT_INTERNAL / 1000;
 module_param(ata_probe_timeout, int, 0444);
 MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
 
@@ -1533,7 +1532,7 @@ unsigned long ata_id_xfermask(const u16 *id)
  *      @ap: The ata_port to queue port_task for
  *      @fn: workqueue function to be scheduled
  *      @data: data for @fn to use
- *      @delay: delay time for workqueue function
+ *      @delay: delay time in msecs for workqueue function
  *
  *      Schedule @fn(@data) for execution after @delay jiffies using
  *      port_task.  There is one port_task per port and it's the
@@ -1552,7 +1551,7 @@ void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
         ap->port_task_data = data;
 
         /* may fail if ata_port_flush_task() in progress */
-        queue_delayed_work(ata_wq, &ap->port_task, delay);
+        queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
 }
 
 /**
@@ -1685,7 +1684,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
         spin_unlock_irqrestore(ap->lock, flags);
 
         if (!timeout)
-                timeout = ata_probe_timeout * 1000 / HZ;
+                timeout = ata_probe_timeout * 1000;
 
         rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
 
@@ -3319,7 +3318,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
                    int (*check_ready)(struct ata_link *link))
 {
         unsigned long start = jiffies;
-        unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
+        unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
         int warned = 0;
 
         if (time_after(nodev_deadline, deadline))
@@ -3387,7 +3386,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
 int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
                                 int (*check_ready)(struct ata_link *link))
 {
-        msleep(ATA_WAIT_AFTER_RESET_MSECS);
+        msleep(ATA_WAIT_AFTER_RESET);
 
         return ata_wait_ready(link, deadline, check_ready);
 }
@@ -3417,13 +3416,13 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
 int sata_link_debounce(struct ata_link *link, const unsigned long *params,
                        unsigned long deadline)
 {
-        unsigned long interval_msec = params[0];
-        unsigned long duration = msecs_to_jiffies(params[1]);
+        unsigned long interval = params[0];
+        unsigned long duration = params[1];
         unsigned long last_jiffies, t;
         u32 last, cur;
         int rc;
 
-        t = jiffies + msecs_to_jiffies(params[2]);
+        t = ata_deadline(jiffies, params[2]);
         if (time_before(t, deadline))
                 deadline = t;
 
@@ -3435,7 +3434,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
         last_jiffies = jiffies;
 
         while (1) {
-                msleep(interval_msec);
+                msleep(interval);
                 if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
                         return rc;
                 cur &= 0xf;
@@ -3444,7 +3443,8 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
                 if (cur == last) {
                         if (cur == 1 && time_before(jiffies, deadline))
                                 continue;
-                        if (time_after(jiffies, last_jiffies + duration))
+                        if (time_after(jiffies,
+                                       ata_deadline(last_jiffies, duration)))
                                 return 0;
                         continue;
                 }
@@ -3636,7 +3636,8 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
                 if (check_ready) {
                         unsigned long pmp_deadline;
 
-                        pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT;
+                        pmp_deadline = ata_deadline(jiffies,
+                                                    ATA_TMOUT_PMP_SRST_WAIT);
                         if (time_after(pmp_deadline, deadline))
                                 pmp_deadline = deadline;
                         ata_wait_ready(link, pmp_deadline, check_ready);
@@ -6073,8 +6074,6 @@ static void __init ata_parse_force_param(void)
 
 static int __init ata_init(void)
 {
-        ata_probe_timeout *= HZ;
-
         ata_parse_force_param();
 
         ata_wq = create_workqueue("ata");
@@ -6127,8 +6126,8 @@ int ata_ratelimit(void)
  *      @reg: IO-mapped register
  *      @mask: Mask to apply to read register value
  *      @val: Wait condition
- *      @interval_msec: polling interval in milliseconds
- *      @timeout_msec: timeout in milliseconds
+ *      @interval: polling interval in milliseconds
+ *      @timeout: timeout in milliseconds
  *
  *      Waiting for some bits of register to change is a common
  *      operation for ATA controllers.  This function reads 32bit LE
@@ -6146,10 +6145,9 @@ int ata_ratelimit(void)
  *      The final register value.
  */
 u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
-                      unsigned long interval_msec,
-                      unsigned long timeout_msec)
+                      unsigned long interval, unsigned long timeout)
 {
-        unsigned long timeout;
+        unsigned long deadline;
         u32 tmp;
 
         tmp = ioread32(reg);
@@ -6158,10 +6156,10 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
          * preceding writes reach the controller before starting to
          * eat away the timeout.
          */
-        timeout = jiffies + (timeout_msec * HZ) / 1000;
+        deadline = ata_deadline(jiffies, timeout);
 
-        while ((tmp & mask) == val && time_before(jiffies, timeout)) {
-                msleep(interval_msec);
+        while ((tmp & mask) == val && time_before(jiffies, deadline)) {
+                msleep(interval);
                 tmp = ioread32(reg);
         }
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7894d83ea1eb..08dd07f10008 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -66,15 +66,14 @@ enum {
         ATA_ECAT_DUBIOUS_TOUT_HSM       = 6,
         ATA_ECAT_DUBIOUS_UNK_DEV        = 7,
         ATA_ECAT_NR                     = 8,
-};
 
-/* Waiting in ->prereset can never be reliable.  It's sometimes nice
- * to wait there but it can't be depended upon; otherwise, we wouldn't
- * be resetting.  Just give it enough time for most drives to spin up.
- */
-enum {
-        ATA_EH_PRERESET_TIMEOUT         = 10 * HZ,
-        ATA_EH_FASTDRAIN_INTERVAL       = 3 * HZ,
+        /* Waiting in ->prereset can never be reliable.  It's
+         * sometimes nice to wait there but it can't be depended upon;
+         * otherwise, we wouldn't be resetting.  Just give it enough
+         * time for most drives to spin up.
+         */
+        ATA_EH_PRERESET_TIMEOUT         = 10000,
+        ATA_EH_FASTDRAIN_INTERVAL       =  3000,
 };
 
 /* The following table determines how we sequence resets.  Each entry
@@ -84,10 +83,10 @@ enum {
  * are mostly for error handling, hotplug and retarded devices.
  */
 static const unsigned long ata_eh_reset_timeouts[] = {
-        10 * HZ,        /* most drives spin up by 10sec */
-        10 * HZ,        /* > 99% working drives spin up before 20sec */
-        35 * HZ,        /* give > 30 secs of idleness for retarded devices */
-        5 * HZ,         /* and sweet one last chance */
+        10000,  /* most drives spin up by 10sec */
+        10000,  /* > 99% working drives spin up before 20sec */
+        35000,  /* give > 30 secs of idleness for retarded devices */
+         5000,  /* and sweet one last chance */
         /* > 1 min has elapsed, give up */
 };
 
@@ -641,7 +640,7 @@ void ata_eh_fastdrain_timerfn(unsigned long arg)
                 /* some qcs have finished, give it another chance */
                 ap->fastdrain_cnt = cnt;
                 ap->fastdrain_timer.expires =
-                        jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+                        ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
                 add_timer(&ap->fastdrain_timer);
         }
 
@@ -681,7 +680,8 @@ static void ata_eh_set_pending(struct ata_port *ap, int fastdrain)
 
         /* activate fast drain */
         ap->fastdrain_cnt = cnt;
-        ap->fastdrain_timer.expires = jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+        ap->fastdrain_timer.expires =
+                ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
         add_timer(&ap->fastdrain_timer);
 }
 
@@ -2125,7 +2125,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
         }
 
         if (prereset) {
-                rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
+                rc = prereset(link,
+                              ata_deadline(jiffies, ATA_EH_PRERESET_TIMEOUT));
                 if (rc) {
                         if (rc == -ENOENT) {
                                 ata_link_printk(link, KERN_DEBUG,
@@ -2160,7 +2161,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
         if (ata_is_host_link(link))
                 ata_eh_freeze_port(ap);
 
-        deadline = jiffies + ata_eh_reset_timeouts[try++];
+        deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]);
 
         if (reset) {
                 if (verbose)
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7daf4c0f6216..63691d77ac43 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -785,7 +785,8 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
                  * SError.N working.
                  */
                 sata_link_hardreset(link, sata_deb_timing_normal,
-                                jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL);
+                                ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK),
+                                NULL, NULL);
 
                 /* unconditionally clear SError.N */
                 rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c0908c225483..304fdc6f1dc2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -345,8 +345,8 @@ void ata_sff_dma_pause(struct ata_port *ap)
 /**
  *      ata_sff_busy_sleep - sleep until BSY clears, or timeout
  *      @ap: port containing status register to be polled
- *      @tmout_pat: impatience timeout
- *      @tmout: overall timeout
+ *      @tmout_pat: impatience timeout in msecs
+ *      @tmout: overall timeout in msecs
  *
  *      Sleep until ATA Status register bit BSY clears,
  *      or a timeout occurs.
@@ -365,7 +365,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
 
         status = ata_sff_busy_wait(ap, ATA_BUSY, 300);
         timer_start = jiffies;
-        timeout = timer_start + tmout_pat;
+        timeout = ata_deadline(timer_start, tmout_pat);
         while (status != 0xff && (status & ATA_BUSY) &&
                time_before(jiffies, timeout)) {
                 msleep(50);
@@ -377,7 +377,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
                                 "port is slow to respond, please be patient "
                                 "(Status 0x%x)\n", status);
 
-        timeout = timer_start + tmout;
+        timeout = ata_deadline(timer_start, tmout);
         while (status != 0xff && (status & ATA_BUSY) &&
                time_before(jiffies, timeout)) {
                 msleep(50);
@@ -390,7 +390,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
         if (status & ATA_BUSY) {
                 ata_port_printk(ap, KERN_ERR, "port failed to respond "
                                 "(%lu secs, Status 0x%x)\n",
-                                tmout / HZ, status);
+                                DIV_ROUND_UP(tmout, 1000), status);
                 return -EBUSY;
         }
 
@@ -1888,7 +1888,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
         unsigned int dev1 = devmask & (1 << 1);
         int rc, ret = 0;
 
-        msleep(ATA_WAIT_AFTER_RESET_MSECS);
+        msleep(ATA_WAIT_AFTER_RESET);
 
         /* always check readiness of the master device */
         rc = ata_sff_wait_ready(link, deadline);
@@ -2371,7 +2371,8 @@ void ata_bus_reset(struct ata_port *ap)
 
         /* issue bus reset */
         if (ap->flags & ATA_FLAG_SRST) {
-                rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
+                rc = ata_bus_softreset(ap, devmask,
+                                       ata_deadline(jiffies, 40000));
                 if (rc && rc != -ENODEV)
                         goto err_out;
         }
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 55516103626a..d3932901a3b3 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1011,7 +1011,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
         void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
         unsigned int dev0 = devmask & (1 << 0);
         unsigned int dev1 = devmask & (1 << 1);
-        unsigned long timeout;
+        unsigned long deadline;
 
         /* if device 0 was found in ata_devchk, wait for its
          * BSY bit to clear
@@ -1022,7 +1022,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
         /* if device 1 was found in ata_devchk, wait for
          * register access, then wait for BSY to clear
          */
-        timeout = jiffies + ATA_TMOUT_BOOT;
+        deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
         while (dev1) {
                 u8 nsect, lbal;
 
@@ -1031,7 +1031,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
                 lbal = read_atapi_register(base, ATA_REG_LBAL);
                 if ((nsect == 1) && (lbal == 1))
                         break;
-                if (time_after(jiffies, timeout)) {
+                if (time_after(jiffies, deadline)) {
                         dev1 = 0;
                         break;
                 }
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index bbf5aa345e68..16673d168573 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -696,7 +696,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
 
                 if (reg & INTSTS_BMSINT) {
                         unsigned int classes;
-                        unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
+                        unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
                         printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
                         out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
                         /* TBD: SW reset */