pata_cmd640: CMD640 PCI support

Support for the PCI CMD640 (not VLB)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

3 files changed, 309 insertions, 0 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 7bdbe5a914d0..1410907d1ed2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -209,6 +209,16 @@ config PATA_ATIIXP
 
           If unsure, say N.
 
+config PATA_CMD640_PCI
+        tristate "CMD640 PCI PATA support (Very Experimental)"
+        depends on PCI && EXPERIMENTAL
+        help
+          This option enables support for the CMD640 PCI IDE
+          interface chip. Only the primary channel is currently
+          supported.
+
+          If unsure, say N.
+
 config PATA_CMD64X
         tristate "CMD64x PATA support (Very Experimental)"
         depends on PCI&& EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 13d7397e0008..b7055e302650 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)          += pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)        += pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)       += pata_atiixp.o
+obj-$(CONFIG_PATA_CMD640_PCI)   += pata_cmd640.o
 obj-$(CONFIG_PATA_CMD64X)       += pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)       += pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)       += pata_cs5530.o
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
new file mode 100644
index 000000000000..4d01d4692412
--- /dev/null
+++ b/drivers/ata/pata_cmd640.c
@@ -0,0 +1,298 @@
+/*
+ * pata_cmd640.c        - CMD640 PCI PATA for new ATA layer
+ *                        (C) 2007 Red Hat Inc
+ *                        Alan Cox <alan@redhat.com>
+ *
+ * Based upon
+ *  linux/drivers/ide/pci/cmd640.c              Version 1.02  Sep 01, 1996
+ *
+ *  Copyright (C) 1995-1996  Linus Torvalds & authors (see driver)
+ *
+ *      This drives only the PCI version of the controller. If you have a
+ *      VLB one then we have enough docs to support it but you can write
+ *      your own code.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cmd640"
+#define DRV_VERSION "0.0.3"
+
+struct cmd640_reg {
+        int last;
+        u8 reg58[ATA_MAX_DEVICES];
+};
+
+enum {
+        CFR = 0x50,
+        CNTRL = 0x51,
+        CMDTIM = 0x52,
+        ARTIM0 = 0x53,
+        DRWTIM0 = 0x54,
+        ARTIM23 = 0x57,
+        DRWTIM23 = 0x58,
+        BRST = 0x59
+};
+
+/**
+ *      cmd640_set_piomode      -       set initial PIO mode data
+ *      @adev: ATA device
+ *
+ *      Called to do the PIO mode setup.
+ */
+
+static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+        struct cmd640_reg *timing = ap->private_data;
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        struct ata_timing t;
+        const unsigned long T = 1000000 / 33;
+        const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
+        u8 reg;
+        int arttim = ARTIM0 + 2 * adev->devno;
+        struct ata_device *pair = ata_dev_pair(adev);
+
+        if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+                printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
+                return;
+        }
+
+        /* The second channel has shared timings and the setup timing is
+           messy to switch to merge it for worst case */
+        if (ap->port_no && pair) {
+                struct ata_timing p;
+                ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
+                ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
+        }
+
+        /* Make the timings fit */
+        if (t.recover > 16) {
+                t.active += t.recover - 16;
+                t.recover = 16;
+        }
+        if (t.active > 16)
+                t.active = 16;
+
+        /* Now convert the clocks into values we can actually stuff into
+           the chip */
+
+        if (t.recover > 1)
+                t.recover--;    /* 640B only */
+        else
+                t.recover = 15;
+
+        if (t.setup > 4)
+                t.setup = 0xC0;
+        else
+                t.setup = setup_data[t.setup];
+
+        if (ap->port_no == 0) {
+                t.active &= 0x0F;       /* 0 = 16 */
+
+                /* Load setup timing */
+                pci_read_config_byte(pdev, arttim, &reg);
+                reg &= 0x3F;
+                reg |= t.setup;
+                pci_write_config_byte(pdev, arttim, reg);
+
+                /* Load active/recovery */
+                pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
+        } else {
+                /* Save the shared timings for channel, they will be loaded
+                   by qc_issue_prot. Reloading the setup time is expensive
+                   so we keep a merged one loaded */
+                pci_read_config_byte(pdev, ARTIM23, &reg);
+                reg &= 0x3F;
+                reg |= t.setup;
+                pci_write_config_byte(pdev, ARTIM23, reg);
+                timing->reg58[adev->devno] = (t.active << 4) | t.recover;
+        }
+}
+
+
+/**
+ *      cmd640_qc_issue_prot    -       command preparation hook
+ *      @qc: Command to be issued
+ *
+ *      Channel 1 has shared timings. We must reprogram the
+ *      clock each drive 2/3 switch we do.
+ */
+
+static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+        struct ata_port *ap = qc->ap;
+        struct ata_device *adev = qc->dev;
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        struct cmd640_reg *timing = ap->private_data;
+
+        if (ap->port_no != 0 && adev->devno != timing->last) {
+                pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
+                timing->last = adev->devno;
+        }
+        return ata_qc_issue_prot(qc);
+}
+
+/**
+ *      cmd640_port_start       -       port setup
+ *      @ap: ATA port being set up
+ *
+ *      The CMD640 needs to maintain private data structures so we
+ *      allocate space here.
+ */
+
+static int cmd640_port_start(struct ata_port *ap)
+{
+        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+        struct cmd640_reg *timing;
+
+        int ret = ata_port_start(ap);
+        if (ret < 0)
+                return ret;
+
+        timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
+        if (timing == NULL)
+                return -ENOMEM;
+        timing->last = -1;      /* Force a load */
+        ap->private_data = timing;
+        return ret;
+}
+
+static struct scsi_host_template cmd640_sht = {
+        .module                 = THIS_MODULE,
+        .name                   = DRV_NAME,
+        .ioctl                  = ata_scsi_ioctl,
+        .queuecommand           = ata_scsi_queuecmd,
+        .can_queue              = ATA_DEF_QUEUE,
+        .this_id                = ATA_SHT_THIS_ID,
+        .sg_tablesize           = LIBATA_MAX_PRD,
+        .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+        .emulated               = ATA_SHT_EMULATED,
+        .use_clustering         = ATA_SHT_USE_CLUSTERING,
+        .proc_name              = DRV_NAME,
+        .dma_boundary           = ATA_DMA_BOUNDARY,
+        .slave_configure        = ata_scsi_slave_config,
+        .slave_destroy          = ata_scsi_slave_destroy,
+        .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
+};
+
+static struct ata_port_operations cmd640_port_ops = {
+        .port_disable   = ata_port_disable,
+        .set_piomode    = cmd640_set_piomode,
+        .mode_filter    = ata_pci_default_filter,
+        .tf_load        = ata_tf_load,
+        .tf_read        = ata_tf_read,
+        .check_status   = ata_check_status,
+        .exec_command   = ata_exec_command,
+        .dev_select     = ata_std_dev_select,
+
+        .freeze         = ata_bmdma_freeze,
+        .thaw           = ata_bmdma_thaw,
+        .error_handler  = ata_bmdma_error_handler,
+        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+        .cable_detect   = ata_cable_40wire,
+
+        .bmdma_setup    = ata_bmdma_setup,
+        .bmdma_start    = ata_bmdma_start,
+        .bmdma_stop     = ata_bmdma_stop,
+        .bmdma_status   = ata_bmdma_status,
+
+        .qc_prep        = ata_qc_prep,
+        .qc_issue       = cmd640_qc_issue_prot,
+
+        /* In theory this is not needed once we kill the prefetcher */
+        .data_xfer      = ata_data_xfer_noirq,
+
+        .irq_handler    = ata_interrupt,
+        .irq_clear      = ata_bmdma_irq_clear,
+        .irq_on         = ata_irq_on,
+        .irq_ack        = ata_irq_ack,
+
+        .port_start     = cmd640_port_start,
+};
+
+static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+        u8 r;
+        u8 ctrl;
+
+        static struct ata_port_info info = {
+                .sht = &cmd640_sht,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .pio_mask = 0x1f,
+                .port_ops = &cmd640_port_ops
+        };
+
+        static struct ata_port_info *port_info[2] = { &info, &info };
+
+        /* CMD640 detected, commiserations */
+        pci_write_config_byte(pdev, 0x5C, 0x00);
+        /* Get version info */
+        pci_read_config_byte(pdev, CFR, &r);
+        /* PIO0 command cycles */
+        pci_write_config_byte(pdev, CMDTIM, 0);
+        /* 512 byte bursts (sector) */
+        pci_write_config_byte(pdev, BRST, 0x40);
+        /*
+         * A reporter a long time ago
+         * Had problems with the data fifo
+         * So don't run the risk
+         * Of putting crap on the disk
+         * For its better just to go slow
+         */
+        /* Do channel 0 */
+        pci_read_config_byte(pdev, CNTRL, &ctrl);
+        pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
+        /* Ditto for channel 1 */
+        pci_read_config_byte(pdev, ARTIM23, &ctrl);
+        ctrl |= 0x0C;
+        pci_write_config_byte(pdev, ARTIM23, ctrl);
+
+        return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static int cmd640_reinit_one(struct pci_dev *pdev)
+{
+        return ata_pci_device_resume(pdev);
+}
+
+static const struct pci_device_id cmd640[] = {
+        { PCI_VDEVICE(CMD, 0x640), 0 },
+        { },
+};
+
+static struct pci_driver cmd640_pci_driver = {
+        .name           = DRV_NAME,
+        .id_table       = cmd640,
+        .probe          = cmd640_init_one,
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = cmd640_reinit_one,
+};
+
+static int __init cmd640_init(void)
+{
+        return pci_register_driver(&cmd640_pci_driver);
+}
+
+static void __exit cmd640_exit(void)
+{
+        pci_unregister_driver(&cmd640_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cmd640);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cmd640_init);
+module_exit(cmd640_exit);