libata: workaround DRQ=1 ERR=1 for ATAPI tape drives

After an error condition, some ATAPI tape drives set DRQ=1 together
with ERR=1 when asking the host to transfer the CDB of the next packet
command (i.e. request sense).  This patch, a revised version of
Alan/Mark's previous patch, adds ATA_HORKAGE_STUCK_ERR to workaround
the problem by ignoring the ERR bit and proceed sending the CDB.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mark Lord <liml@rtr.ca>
Signed-off-by: Tejun Heo <htejun@gmail.com>

1 files changed, 13 insertions, 5 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1584164e7704..5478b4c6c6e9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5415,11 +5415,19 @@ fsm_start:
                  * let the EH abort the command or reset the device.
                  */
                 if (unlikely(status & (ATA_ERR | ATA_DF))) {
-                        ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
-                                        "error, dev_stat 0x%X\n", status);
-                        qc->err_mask |= AC_ERR_HSM;
-                        ap->hsm_task_state = HSM_ST_ERR;
-                        goto fsm_start;
+                        /* Some ATAPI tape drives forget to clear the ERR bit
+                         * when doing the next command (mostly request sense).
+                         * We ignore ERR here to workaround and proceed sending
+                         * the CDB.
+                         */
+                        if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+                                ata_port_printk(ap, KERN_WARNING,
+                                                "DRQ=1 with device error, "
+                                                "dev_stat 0x%X\n", status);
+                                qc->err_mask |= AC_ERR_HSM;
+                                ap->hsm_task_state = HSM_ST_ERR;
+                                goto fsm_start;
+                        }
                 }
 
                 /* Send the CDB (atapi) or the first data block (ata pio out).