pata_hpt37x: coding style cleanup

Fix 12 errors and 15 warnings given by checkpatch.pl:

- *switch* and *case* not on the same indentation level;

- no space between *for*/*switch*/*while* and open parenthesis;

- space between an unary operator and its operand;

- drive blacklist arrays not being *const*;

- spaces before tabs;

- lines over 80 characters.

In addition to these changes, also do the following:

- add new line after variable definitions;

- fix the style of some multi-line comments.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 101 insertions, 81 deletions

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9c62951c3e26..9e2c98449055 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt37x"
-#define DRV_VERSION     "0.6.16"
+#define DRV_VERSION     "0.6.17"
 
 struct hpt_clock {
         u8      xfer_speed;
@@ -210,7 +210,7 @@ static u32 hpt37x_find_mode(struct ata_port *ap, int speed)
 {
         struct hpt_clock *clocks = ap->host->private_data;
 
-        while(clocks->xfer_speed) {
+        while (clocks->xfer_speed) {
                 if (clocks->xfer_speed == speed)
                         return clocks->timing;
                 clocks++;
@@ -219,7 +219,8 @@ static u32 hpt37x_find_mode(struct ata_port *ap, int speed)
         return 0xffffffffU;     /* silence compiler warning */
 }
 
-static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[])
+static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
+                               const char * const list[])
 {
         unsigned char model_num[ATA_ID_PROD_LEN + 1];
         int i = 0;
@@ -237,18 +238,23 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
         return 0;
 }
 
-static const char *bad_ata33[] = {
-        "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
-        "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
-        "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+static const char * const bad_ata33[] = {
+        "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
+        "Maxtor 90845U3", "Maxtor 90650U2",
+        "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5",
+        "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+        "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6",
+        "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
         "Maxtor 90510D4",
         "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
-        "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
-        "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+        "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7",
+        "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+        "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5",
+        "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
         NULL
 };
 
-static const char *bad_ata100_5[] = {
+static const char * const bad_ata100_5[] = {
         "IBM-DTLA-307075",
         "IBM-DTLA-307060",
         "IBM-DTLA-307045",
@@ -389,6 +395,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
                 { 0x50, 1, 0x04, 0x04 },
                 { 0x54, 1, 0x04, 0x04 }
         };
+
         if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
                 return -ENOENT;
 
@@ -673,12 +680,12 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev)
         u32 reg5c;
         int tries;
 
-        for(tries = 0; tries < 0x5000; tries++) {
+        for (tries = 0; tries < 0x5000; tries++) {
                 udelay(50);
                 pci_read_config_byte(dev, 0x5b, &reg5b);
                 if (reg5b & 0x80) {
                         /* See if it stays set */
-                        for(tries = 0; tries < 0x1000; tries ++) {
+                        for (tries = 0; tries < 0x1000; tries++) {
                                 pci_read_config_byte(dev, 0x5b, &reg5b);
                                 /* Failed ? */
                                 if ((reg5b & 0x80) == 0)
@@ -686,7 +693,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev)
                         }
                         /* Turn off tuning, we have the DPLL set */
                         pci_read_config_dword(dev, 0x5c, &reg5c);
-                        pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100);
+                        pci_write_config_dword(dev, 0x5c, reg5c & ~0x100);
                         return 1;
                 }
         }
@@ -698,6 +705,7 @@ static u32 hpt374_read_freq(struct pci_dev *pdev)
 {
         u32 freq;
         unsigned long io_base = pci_resource_start(pdev, 4);
+
         if (PCI_FUNC(pdev->devfn) & 1) {
                 struct pci_dev *pdev_0;
 
@@ -839,64 +847,68 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 if (rev == 6)
                         return -ENODEV;
 
-                switch(rev) {
-                        case 3:
-                                ppi[0] = &info_hpt370;
-                                chip_table = &hpt370;
-                                prefer_dpll = 0;
-                                break;
-                        case 4:
-                                ppi[0] = &info_hpt370a;
-                                chip_table = &hpt370a;
-                                prefer_dpll = 0;
-                                break;
-                        case 5:
-                                ppi[0] = &info_hpt372;
-                                chip_table = &hpt372;
-                                break;
-                        default:
-                                printk(KERN_ERR "pata_hpt37x: Unknown HPT366 "
-                                       "subtype, please report (%d).\n", rev);
-                                return -ENODEV;
+                switch (rev) {
+                case 3:
+                        ppi[0] = &info_hpt370;
+                        chip_table = &hpt370;
+                        prefer_dpll = 0;
+                        break;
+                case 4:
+                        ppi[0] = &info_hpt370a;
+                        chip_table = &hpt370a;
+                        prefer_dpll = 0;
+                        break;
+                case 5:
+                        ppi[0] = &info_hpt372;
+                        chip_table = &hpt372;
+                        break;
+                default:
+                        printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+                               "please report (%d).\n", rev);
+                        return -ENODEV;
                 }
         } else {
-                switch(dev->device) {
-                        case PCI_DEVICE_ID_TTI_HPT372:
-                                /* 372N if rev >= 2 */
-                                if (rev >= 2)
-                                        return -ENODEV;
-                                ppi[0] = &info_hpt372;
-                                chip_table = &hpt372a;
-                                break;
-                        case PCI_DEVICE_ID_TTI_HPT302:
-                                /* 302N if rev > 1 */
-                                if (rev > 1)
-                                        return -ENODEV;
-                                ppi[0] = &info_hpt302;
-                                /* Check this */
-                                chip_table = &hpt302;
-                                break;
-                        case PCI_DEVICE_ID_TTI_HPT371:
-                                if (rev > 1)
-                                        return -ENODEV;
-                                ppi[0] = &info_hpt302;
-                                chip_table = &hpt371;
-                                /* Single channel device, master is not present
-                                   but the BIOS (or us for non x86) must mark it
-                                   absent */
-                                pci_read_config_byte(dev, 0x50, &mcr1);
-                                mcr1 &= ~0x04;
-                                pci_write_config_byte(dev, 0x50, mcr1);
-                                break;
-                        case PCI_DEVICE_ID_TTI_HPT374:
-                                chip_table = &hpt374;
-                                if (!(PCI_FUNC(dev->devfn) & 1))
-                                        *ppi = &info_hpt374_fn0;
-                                else
-                                        *ppi = &info_hpt374_fn1;
-                                break;
-                        default:
-                                printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
+                switch (dev->device) {
+                case PCI_DEVICE_ID_TTI_HPT372:
+                        /* 372N if rev >= 2 */
+                        if (rev >= 2)
+                                return -ENODEV;
+                        ppi[0] = &info_hpt372;
+                        chip_table = &hpt372a;
+                        break;
+                case PCI_DEVICE_ID_TTI_HPT302:
+                        /* 302N if rev > 1 */
+                        if (rev > 1)
+                                return -ENODEV;
+                        ppi[0] = &info_hpt302;
+                        /* Check this */
+                        chip_table = &hpt302;
+                        break;
+                case PCI_DEVICE_ID_TTI_HPT371:
+                        if (rev > 1)
+                                return -ENODEV;
+                        ppi[0] = &info_hpt302;
+                        chip_table = &hpt371;
+                        /*
+                         * Single channel device, master is not present
+                         * but the BIOS (or us for non x86) must mark it
+                         * absent
+                         */
+                        pci_read_config_byte(dev, 0x50, &mcr1);
+                        mcr1 &= ~0x04;
+                        pci_write_config_byte(dev, 0x50, mcr1);
+                        break;
+                case PCI_DEVICE_ID_TTI_HPT374:
+                        chip_table = &hpt374;
+                        if (!(PCI_FUNC(dev->devfn) & 1))
+                                *ppi = &info_hpt374_fn0;
+                        else
+                                *ppi = &info_hpt374_fn1;
+                        break;
+                default:
+                        printk(KERN_ERR
+                               "pata_hpt37x: PCI table is bogus, please report (%d).\n",
+                               dev->device);
                                 return -ENODEV;
                 }
         }
@@ -927,9 +939,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         if (chip_table == &hpt372a)
                 outb(0x0e, iobase + 0x9c);
 
-        /* Some devices do not let this value be accessed via PCI space
-           according to the old driver. In addition we must use the value
-           from FN 0 on the HPT374 */
+        /*
+         * Some devices do not let this value be accessed via PCI space
+         * according to the old driver. In addition we must use the value
+         * from FN 0 on the HPT374.
+         */
 
         if (chip_table == &hpt374) {
                 freq = hpt374_read_freq(dev);
@@ -943,10 +957,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 u8 sr;
                 u32 total = 0;
 
-                printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n");
+                printk(KERN_WARNING
+                       "pata_hpt37x: BIOS has not set timing clocks.\n");
 
                 /* This is the process the HPT371 BIOS is reported to use */
-                for(i = 0; i < 128; i++) {
+                for (i = 0; i < 128; i++) {
                         pci_read_config_byte(dev, 0x78, &sr);
                         total += sr & 0x1FF;
                         udelay(15);
@@ -981,17 +996,22 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
                 /* Select the DPLL clock. */
                 pci_write_config_byte(dev, 0x5b, 0x21);
-                pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
+                pci_write_config_dword(dev, 0x5C,
+                                       (f_high << 16) | f_low | 0x100);
 
-                for(adjust = 0; adjust < 8; adjust++) {
+                for (adjust = 0; adjust < 8; adjust++) {
                         if (hpt37x_calibrate_dpll(dev))
                                 break;
-                        /* See if it'll settle at a fractionally different clock */
+                        /*
+                         * See if it'll settle at a fractionally
+                         * different clock
+                         */
                         if (adjust & 1)
                                 f_low -= adjust >> 1;
                         else
                                 f_high += adjust >> 1;
-                        pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
+                        pci_write_config_dword(dev, 0x5C,
+                                               (f_high << 16) | f_low | 0x100);
                 }
                 if (adjust == 8) {
                         printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
@@ -1010,7 +1030,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                  *      Perform a final fixup. Note that we will have used the
                  *      DPLL on the HPT372 which means we don't have to worry
                  *      about lack of UDMA133 support on lower clocks
-                 */
+                 */
 
                 if (clock_slot < 2 && ppi[0] == &info_hpt370)
                         ppi[0] = &info_hpt370_33;
@@ -1035,9 +1055,9 @@ static const struct pci_device_id hpt37x[] = {
 };
 
 static struct pci_driver hpt37x_pci_driver = {
-        .name           = DRV_NAME,
+        .name           = DRV_NAME,
         .id_table       = hpt37x,
-        .probe          = hpt37x_init_one,
+        .probe          = hpt37x_init_one,
         .remove         = ata_pci_remove_one
 };