[PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2

This patch implements ATA_FLAG_SETXFER_POLLING and use in pata_via.
If this flag is set, transfer mode setting performed by polling not by
interrupt.  This should help those controllers which raise interrupt
before the command is actually complete on SETXFER.

Rationale for this approach.

* uses existing facility and relatively simple
* no busy sleep in the interrupt handler
* updating drivers is easy

While at it, kill now unused flag ATA_FLAG_SRST in pata_via.

Signed-off-by: Tejun Heo <htejun@gmail.com>

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ee93dd0169be..a9077b617b8d 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -418,7 +418,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* Early VIA without UDMA support */
         static struct ata_port_info via_mwdma_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .port_ops = &via_port_ops
@@ -426,7 +426,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* Ditto with IRQ masking required */
         static struct ata_port_info via_mwdma_info_borked = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .port_ops = &via_port_ops_noirq,
@@ -434,7 +434,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* VIA UDMA 33 devices (and borked 66) */
         static struct ata_port_info via_udma33_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x7,
@@ -443,7 +443,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* VIA UDMA 66 devices */
         static struct ata_port_info via_udma66_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x1f,
@@ -452,7 +452,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* VIA UDMA 100 devices */
         static struct ata_port_info via_udma100_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x3f,
@@ -461,7 +461,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
         /* UDMA133 with bad AST (All current 133) */
         static struct ata_port_info via_udma133_info = {
                 .sht = &via_sht,
-                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+                .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SETXFER_POLLING,
                 .pio_mask = 0x1f,
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x7f,      /* FIXME: should check north bridge */