aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_netcell.c
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2008-03-24 23:22:47 -0400
committerJeff Garzik <jgarzik@redhat.com>2008-04-17 15:44:16 -0400
commitf08048e94564d009b19038cfbdd800aa83e79c7f (patch)
tree4afa7e4fff9ec716e9acbe746a464cda5daec063 /drivers/ata/pata_netcell.c
parentb558edddb1c42c70a30cfe494984d4be409f7b2b (diff)
libata: PCI device should be powered up before being accessed
PCI device should be powered up or powered up before its PCI regsiters are accessed. Although PCI configuration register access is allowed in D3hot, PCI device is free to reset its status when transiting from D3hot to D0 causing configuration data to change. Many libata SFF drivers which use ata_pci_init_one() read and update configuration registers before calling ata_pci_init_one() which enables the PCI device. Also, in resume paths, some drivers access registers without resuming the PCI device. This patch adds a call to pcim_enable_device() in init path if register is accessed before calling ata_pci_init_one() and make resume paths first resume PCI devices, access PCI configuration regiters then resume ATA host. While at it... * cmd640 was strange in that it set ->resume even when CONFIG_PM is not. This is by-product of minimal build fix. Updated. * In cs5530, Don't BUG() on reinit failure. Just whine and fail resume. Signed-off-by: Tejun Heo <htejun@gmail.com>
Diffstat (limited to 'drivers/ata/pata_netcell.c')
-rw-r--r--drivers/ata/pata_netcell.c5
1 files changed, 5 insertions, 0 deletions
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 25c922abd554..0e4a08e15209 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -100,11 +100,16 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
100 .port_ops = &netcell_ops, 100 .port_ops = &netcell_ops,
101 }; 101 };
102 const struct ata_port_info *port_info[] = { &info, NULL }; 102 const struct ata_port_info *port_info[] = { &info, NULL };
103 int rc;
103 104
104 if (!printed_version++) 105 if (!printed_version++)
105 dev_printk(KERN_DEBUG, &pdev->dev, 106 dev_printk(KERN_DEBUG, &pdev->dev,
106 "version " DRV_VERSION "\n"); 107 "version " DRV_VERSION "\n");
107 108
109 rc = pcim_enable_device(pdev);
110 if (rc)
111 return rc;
112
108 /* Any chip specific setup/optimisation/messages here */ 113 /* Any chip specific setup/optimisation/messages here */
109 ata_pci_clear_simplex(pdev); 114 ata_pci_clear_simplex(pdev);
110 115