pata_hpt3x3: major reworking and testing

The HPT343/345 (aka 363) is a bit of a warped device.  For many setups you
need to access the other registers via BAR4 offsets.  PIO is now rock
solid, DMA isn't.  Unfortunately the drivers/ide hpt34x driver is
completely broken so doesn't help further debug.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 76 insertions, 14 deletions

diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index d928c9105034..a66e2c3a221b 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x3"
-#define DRV_VERSION     "0.4.3"
+#define DRV_VERSION     "0.5.3"
 
 /**
  *      hpt3x3_set_piomode              -       PIO setup
@@ -59,6 +59,9 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *      Set up the channel for MWDMA or UDMA modes. Much the same as with
  *      PIO, load the mode number and then set MWDMA or UDMA flag.
+ *
+ *      0x44 : bit 0-2 master mode, 3-5 slave mode, etc
+ *      0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc
  */
 
 static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
@@ -76,14 +79,26 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
         r2 &= ~(0x11 << dn);    /* Clear MWDMA and UDMA bits */
 
         if (adev->dma_mode >= XFER_UDMA_0)
-                r2 |= 0x01 << dn;       /* Ultra mode */
+                r2 |= (0x10 << dn);     /* Ultra mode */
         else
-                r2 |= 0x10 << dn;       /* MWDMA */
+                r2 |= (0x01 << dn);     /* MWDMA */
 
         pci_write_config_dword(pdev, 0x44, r1);
         pci_write_config_dword(pdev, 0x48, r2);
 }
 
+/**
+ *      hpt3x3_atapi_dma        -       ATAPI DMA check
+ *      @qc: Queued command
+ *
+ *      Just say no - we don't do ATAPI DMA
+ */
+
+static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
+{
+        return 1;
+}
+
 static struct scsi_host_template hpt3x3_sht = {
         .module                 = THIS_MODULE,
         .name                   = DRV_NAME,
@@ -105,7 +120,6 @@ static struct scsi_host_template hpt3x3_sht = {
 static struct ata_port_operations hpt3x3_port_ops = {
         .port_disable   = ata_port_disable,
         .set_piomode    = hpt3x3_set_piomode,
-        .set_dmamode    = hpt3x3_set_dmamode,
         .mode_filter    = ata_pci_default_filter,
 
         .tf_load        = ata_tf_load,
@@ -124,6 +138,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
         .bmdma_start    = ata_bmdma_start,
         .bmdma_stop     = ata_bmdma_stop,
         .bmdma_status   = ata_bmdma_status,
+        .check_atapi_dma= hpt3x3_atapi_dma,
 
         .qc_prep        = ata_qc_prep,
         .qc_issue       = ata_qc_issue_prot,
@@ -158,32 +173,79 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
                 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 }
 
-
 /**
  *      hpt3x3_init_one         -       Initialise an HPT343/363
- *      @dev: PCI device
+ *      @pdev: PCI device
  *      @id: Entry in match table
  *
- *      Perform basic initialisation. The chip has a quirk that it won't
- *      function unless it is at XX00. The old ATA driver touched this up
- *      but we leave it for pci quirks to do properly.
+ *      Perform basic initialisation. We set the device up so we access all
+ *      ports via BAR4. This is neccessary to work around errata.
  */
 
-static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+        static int printed_version;
         static const struct ata_port_info info = {
                 .sht = &hpt3x3_sht,
                 .flags = ATA_FLAG_SLAVE_POSS,
                 .pio_mask = 0x1f,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
+                /* Further debug needed */
                 .mwdma_mask = 0x07,
                 .udma_mask = 0x07,
+#endif
                 .port_ops = &hpt3x3_port_ops
         };
+        /* Register offsets of taskfiles in BAR4 area */
+        static const u8 offset_cmd[2] = { 0x20, 0x28 };
+        static const u8 offset_ctl[2] = { 0x36, 0x3E };
         const struct ata_port_info *ppi[] = { &info, NULL };
-
-        hpt3x3_init_chipset(dev);
-        /* Now kick off ATA set up */
-        return ata_pci_init_one(dev, ppi);
+        struct ata_host *host;
+        int i, rc;
+        void __iomem *base;
+
+        hpt3x3_init_chipset(pdev);
+
+        if (!printed_version++)
+                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+        host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+        if (!host)
+                return -ENOMEM;
+        /* acquire resources and fill host */
+        rc = pcim_enable_device(pdev);
+        if (rc)
+                return rc;
+
+        /* Everything is relative to BAR4 if we set up this way */
+        rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+        if (rc == -EBUSY)
+                pcim_pin_device(pdev);
+        if (rc)
+                return rc;
+        host->iomap = pcim_iomap_table(pdev);
+        rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+        if (rc)
+                return rc;
+        rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+        if (rc)
+                return rc;
+
+        base = host->iomap[4];  /* Bus mastering base */
+
+        for (i = 0; i < host->n_ports; i++) {
+                struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+                ioaddr->cmd_addr = base + offset_cmd[i];
+                ioaddr->altstatus_addr =
+                ioaddr->ctl_addr = base + offset_ctl[i];
+                ioaddr->scr_addr = NULL;
+                ata_std_ports(ioaddr);
+                ioaddr->bmdma_addr = base + 8 * i;
+        }
+        pci_set_master(pdev);
+        return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+                                 &hpt3x3_sht);
 }
 
 #ifdef CONFIG_PM