pata_hpt{37x|3x2n}: fix clock reporting (take 2)

Fix several inconsistencies in these drivers WRT reporting the clocks:

- when using DPLL mode, 'pata_hpt37x' driver reported the DPLL frequency as the
  PCI clock -- make it properly report both clocks and add the same ability to
  the 'pata_hpt3x2n' driver;

- both drivers sometimes use "pata_hpt3*:" and sometimes "hpt3*:" in the
  messages -- make them use only the former one;

- the message about failed DPLL stablizatios deserves KERN_ERR and a bang. :-)

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 5 insertions, 3 deletions

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index aa29cde09f8b..f8f234bfc8ce 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1999-2003              Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001          Sun Microsystems, Inc.
  * Portions Copyright (C) 2003          Red Hat Inc
- * Portions Copyright (C) 2005-2006     MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2007     MontaVista Software, Inc.
  *
  *
  * TODO
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x2n"
-#define DRV_VERSION     "0.3.3"
+#define DRV_VERSION     "0.3.4"
 
 enum {
         HPT_PCI_FAST    =       (1 << 31),
@@ -579,10 +579,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
         }
         if (adjust == 8) {
-                printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");
+                printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
                 return -ENODEV;
         }
 
+        printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
+               pci_mhz);
         /* Set our private data up. We only need a few flags so we use
            it directly */
         port.private_data = NULL;