pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)

... the same as the 'pata_hpt366' driver does.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 5 insertions, 7 deletions

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d2239bbdb798..eca68caf5f46 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt3x2n"
-#define DRV_VERSION     "0.3.13"
+#define DRV_VERSION     "0.3.14"
 
 enum {
         HPT_PCI_FAST    =       (1 << 31),
@@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
                 u16 sr;
                 u32 total = 0;
 
-                printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+                pr_warning(DRV_NAME ": BIOS clock data not set.\n");
 
                 /* This is the process the HPT371 BIOS is reported to use */
                 for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@ hpt372n:
                 ppi[0] = &info_hpt372n;
                 break;
         default:
-                printk(KERN_ERR
-                       "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+                pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
                        dev->device);
                 return -ENODEV;
         }
@@ -579,12 +578,11 @@ hpt372n:
                 pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
         }
         if (adjust == 8) {
-                printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+                pr_err(DRV_NAME ": DPLL did not stabilize!\n");
                 return -ENODEV;
         }
 
-        printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
-               pci_mhz);
+        pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
 
         /*
          * Set our private data up. We only need a few flags