[libata #pata-drivers] Trim trailing whitespace.

1 files changed, 20 insertions, 20 deletions

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index e54a0c51681d..94bb1dfc3f19 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -168,7 +168,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
 
         while(list[i] != NULL) {
                 if (!strncmp(list[i], s, len)) {
-                        printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", 
+                        printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
                                 modestr, list[i]);
                         return 1;
                 }
@@ -184,7 +184,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
  *
  *      Block UDMA on devices that cause trouble with this controller.
  */
- 
+
 static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
 {
         if (adev->class == ATA_DEV_ATA) {
@@ -206,11 +206,11 @@ static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device
  *      Return the 32bit register programming information for this channel
  *      that matches the speed provided.
  */
- 
+
 static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 {
         struct hpt_clock *clocks = ap->host->private_data;
-        
+
         while(clocks->xfer_speed) {
                 if (clocks->xfer_speed == speed)
                         return clocks->timing;
@@ -219,12 +219,12 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
         BUG();
         return 0xffffffffU;     /* silence compiler warning */
 }
-        
+
 static int hpt36x_pre_reset(struct ata_port *ap)
 {
         u8 ata66;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-        
+
         pci_read_config_byte(pdev, 0x5A, &ata66);
         if (ata66 & (1 << ap->port_no))
                 ap->cbl = ATA_CBL_PATA40;
@@ -239,7 +239,7 @@ static int hpt36x_pre_reset(struct ata_port *ap)
  *
  *      Perform the reset handling for the 366/368
  */
- 
+
 static void hpt36x_error_handler(struct ata_port *ap)
 {
         ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
@@ -250,9 +250,9 @@ static void hpt36x_error_handler(struct ata_port *ap)
  *      @ap: ATA interface
  *      @adev: device on the interface
  *
- *      Perform PIO mode setup. 
+ *      Perform PIO mode setup.
  */
- 
+
 static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -263,14 +263,14 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
         addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
         addr2 = 0x51 + 4 * ap->port_no;
-        
+
         /* Fast interrupt prediction disable, hold off interrupt disable */
         pci_read_config_byte(pdev, addr2, &fast);
         if (fast & 0x80) {
                 fast &= ~0x80;
                 pci_write_config_byte(pdev, addr2, fast);
         }
-        
+
         pci_read_config_dword(pdev, addr1, &reg);
         mode = hpt36x_find_mode(ap, adev->pio_mode);
         mode &= ~0x8000000;     /* No FIFO in PIO */
@@ -287,7 +287,7 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *      Set up the channel for MWDMA or UDMA modes. Much the same as with
  *      PIO, load the mode number and then set MWDMA or UDMA flag.
  */
- 
+
 static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -298,14 +298,14 @@ static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
         addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
         addr2 = 0x51 + 4 * ap->port_no;
-        
+
         /* Fast interrupt prediction disable, hold off interrupt disable */
         pci_read_config_byte(pdev, addr2, &fast);
         if (fast & 0x80) {
                 fast &= ~0x80;
                 pci_write_config_byte(pdev, addr2, fast);
         }
-        
+
         pci_read_config_dword(pdev, addr1, &reg);
         mode = hpt36x_find_mode(ap, adev->dma_mode);
         mode |= 0x8000000;      /* FIFO in MWDMA or UDMA */
@@ -335,13 +335,13 @@ static struct scsi_host_template hpt36x_sht = {
 /*
  *      Configuration for HPT366/68
  */
- 
+
 static struct ata_port_operations hpt366_port_ops = {
         .port_disable   = ata_port_disable,
         .set_piomode    = hpt366_set_piomode,
         .set_dmamode    = hpt366_set_dmamode,
         .mode_filter    = hpt366_filter,
-        
+
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
         .check_status   = ata_check_status,
@@ -369,7 +369,7 @@ static struct ata_port_operations hpt366_port_ops = {
         .port_start     = ata_port_start,
         .port_stop      = ata_port_stop,
         .host_stop      = ata_host_stop
-};      
+};
 
 /**
  *      hpt36x_init_one         -       Initialise an HPT366/368
@@ -391,7 +391,7 @@ static struct ata_port_operations hpt366_port_ops = {
  *      HPT37x/30x              4 (HPT366)      3+      Other driver
  *
  */
- 
+
 static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
         static struct ata_port_info info_hpt366 = {
@@ -410,7 +410,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xFF;
-        
+
         /* May be a later chip in disguise. Check */
         /* Newer chips are not in the HPT36x driver. Ignore them */
         if (class_rev > 2)
@@ -426,7 +426,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
                 pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
 
         pci_read_config_dword(dev, 0x40,  &reg1);
-        
+
         /* PCI clocking determines the ATA timing values to use */
         /* info_hpt366 is safe against re-entry so we can scribble on it */
         switch(reg1 & 0x700) {