Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits)
  [PATCH] pata_ali: small fixes
  [PATCH] pata_via: VIA 8251 bridged systems are now out and about
  [PATCH] trivial piix: swap bogus dot for comma space
  [PATCH] sata_promise: PHYMODE4 fixup
  [PATCH] libata: always use polling IDENTIFY
  [libata] pata_cs5535: fix build
  [PATCH] ahci: do not powerdown during initialization
  [PATCH] libata: prepare ata_sg_clean() for invocation from EH
  [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf()
  [PATCH] libata: implement ata_exec_internal_sg()
  [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze()
  [PATCH] libata: move BMDMA host status recording from EH to interrupt handler
  [PATCH] libata: make sure sdev doesn't go away while rescanning
  [PATCH] libata: don't request sense if the port is frozen
  [PATCH] libata: fix READ CAPACITY simulation
  [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2
  [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs
  [PATCH] libata: remove unused HSM_ST_UNKNOWN
  [PATCH] libata: kill unnecessary sht->max_sectors initializations
  [PATCH] libata: add missing sht->slave_destroy
  ...

1 files changed, 43 insertions, 15 deletions

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c0e150a9586b..2663599a7c02 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME        "pata_hpt366"
-#define DRV_VERSION     "0.5"
+#define DRV_VERSION     "0.5.3"
 
 struct hpt_clock {
         u8      xfer_speed;
@@ -222,9 +222,17 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 
 static int hpt36x_pre_reset(struct ata_port *ap)
 {
+        static const struct pci_bits hpt36x_enable_bits[] = {
+                { 0x50, 1, 0x04, 0x04 },
+                { 0x54, 1, 0x04, 0x04 }
+        };
+
         u8 ata66;
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
+        if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
+                return -ENOENT;
+                
         pci_read_config_byte(pdev, 0x5A, &ata66);
         if (ata66 & (1 << ap->port_no))
                 ap->cbl = ATA_CBL_PATA40;
@@ -322,7 +330,6 @@ static struct scsi_host_template hpt36x_sht = {
         .can_queue              = ATA_DEF_QUEUE,
         .this_id                = ATA_SHT_THIS_ID,
         .sg_tablesize           = LIBATA_MAX_PRD,
-        .max_sectors            = ATA_MAX_SECTORS,
         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
         .emulated               = ATA_SHT_EMULATED,
         .use_clustering         = ATA_SHT_USE_CLUSTERING,
@@ -331,6 +338,8 @@ static struct scsi_host_template hpt36x_sht = {
         .slave_configure        = ata_scsi_slave_config,
         .slave_destroy          = ata_scsi_slave_destroy,
         .bios_param             = ata_std_bios_param,
+        .resume                 = ata_scsi_device_resume,
+        .suspend                = ata_scsi_device_suspend,
 };
 
 /*
@@ -373,6 +382,27 @@ static struct ata_port_operations hpt366_port_ops = {
 };
 
 /**
+ *      hpt36x_init_chipset     -       common chip setup
+ *      @dev: PCI device
+ *
+ *      Perform the chip setup work that must be done at both init and
+ *      resume time
+ */
+
+static void hpt36x_init_chipset(struct pci_dev *dev)
+{
+        u8 drive_fast;
+        pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+        pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+        pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+        pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+
+        pci_read_config_byte(dev, 0x51, &drive_fast);
+        if (drive_fast & 0x80)
+                pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+}
+
+/**
  *      hpt36x_init_one         -       Initialise an HPT366/368
  *      @dev: PCI device
  *      @id: Entry in match table
@@ -407,7 +437,6 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
         u32 class_rev;
         u32 reg1;
-        u8 drive_fast;
 
         pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
         class_rev &= 0xFF;
@@ -417,14 +446,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         if (class_rev > 2)
                         return -ENODEV;
 
-        pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
-        pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
-        pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
-        pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
-
-        pci_read_config_byte(dev, 0x51, &drive_fast);
-        if (drive_fast & 0x80)
-                pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+        hpt36x_init_chipset(dev);
 
         pci_read_config_dword(dev, 0x40,  &reg1);
 
@@ -445,9 +467,15 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
         return ata_pci_init_one(dev, port_info, 2);
 }
 
+static int hpt36x_reinit_one(struct pci_dev *dev)
+{
+        hpt36x_init_chipset(dev);
+        return ata_pci_device_resume(dev);
+}
+
+
 static const struct pci_device_id hpt36x[] = {
         { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
-
         { },
 };
 
@@ -455,7 +483,9 @@ static struct pci_driver hpt36x_pci_driver = {
         .name           = DRV_NAME,
         .id_table       = hpt36x,
         .probe          = hpt36x_init_one,
-        .remove         = ata_pci_remove_one
+        .remove         = ata_pci_remove_one,
+        .suspend        = ata_pci_device_suspend,
+        .resume         = hpt36x_reinit_one,
 };
 
 static int __init hpt36x_init(void)
@@ -463,13 +493,11 @@ static int __init hpt36x_init(void)
         return pci_register_driver(&hpt36x_pci_driver);
 }
 
-
 static void __exit hpt36x_exit(void)
 {
         pci_unregister_driver(&hpt36x_pci_driver);
 }
 
-
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
 MODULE_LICENSE("GPL");