[libata #pata-drivers] Trim trailing whitespace.

1 files changed, 16 insertions, 16 deletions

diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 322043d8cf7f..fd55474e0d15 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -7,7 +7,7 @@
  * linux/drivers/ide/pci/cy82c693.c             Version 0.40    Sep. 10, 2002
  *
  */
- 
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -59,7 +59,7 @@ static void cy82c693_error_handler(struct ata_port *ap)
  *
  *      Called to do the PIO mode setup.
  */
- 
+
 static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -67,7 +67,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
         const unsigned long T = 1000000 / 33;
         short time_16, time_8;
         u32 addr;
-        
+
         if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) {
                 printk(KERN_ERR DRV_NAME ": mome computation failed.\n");
                 return;
@@ -75,20 +75,20 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
         time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
         time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
-        
+
         if (adev->devno == 0) {
                 pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
-                
+
                 addr &= ~0x0F;  /* Mask bits */
                 addr |= FIT(t.setup, 0, 15);
-                
+
                 pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
                 pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
                 pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16);
                 pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8);
         } else {
                 pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
-                
+
                 addr &= ~0xF0;  /* Mask bits */
                 addr |= (FIT(t.setup, 0, 15) << 4);
 
@@ -106,15 +106,15 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *      Called to do the DMA mode setup.
  */
- 
+
 static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
         int reg = CY82_INDEX_CHANNEL0 + ap->port_no;
-        
+
         /* Be afraid, be very afraid. Magic registers  in low I/O space */
         outb(reg, 0x22);
         outb(adev->dma_mode - XFER_MW_DMA_0, 0x23);
-        
+
         /* 0x50 gives the best behaviour on the Alpha's using this chip */
         outb(CY82_INDEX_TIMEOUT, 0x22);
         outb(0x50, 0x23);
@@ -143,7 +143,7 @@ static struct ata_port_operations cy82c693_port_ops = {
         .set_piomode    = cy82c693_set_piomode,
         .set_dmamode    = cy82c693_set_dmamode,
         .mode_filter    = ata_pci_default_filter,
-        
+
         .tf_load        = ata_tf_load,
         .tf_read        = ata_tf_read,
         .check_status   = ata_check_status,
@@ -167,11 +167,11 @@ static struct ata_port_operations cy82c693_port_ops = {
 
         .irq_handler    = ata_interrupt,
         .irq_clear      = ata_bmdma_irq_clear,
-        
+
         .port_start     = ata_port_start,
         .port_stop      = ata_port_stop,
         .host_stop      = ata_host_stop
-};      
+};
 
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -183,13 +183,13 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
                 .port_ops = &cy82c693_port_ops
         };
         static struct ata_port_info *port_info[1] = { &info };
-        
+
         /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the
            moment we don't handle the secondary. FIXME */
-           
+
         if (PCI_FUNC(pdev->devfn) != 1)
                 return -ENODEV;
-        
+
         return ata_pci_init_one(pdev, port_info, 1);
 }